REPAIR MAINT OF SECURITY LIGHT AND HIGH MAST LIGHT AT DOMESTIC SU SITE 1A AND 1B AF STN JODHPUR UNDER GE AF JODHPUR

Amount

S&F in replacement of automatic street light timer using nature switch for automatic switching of street light based on LUX level of natural light .The sensor (nature switch) along with suitable power contactor, MCB and support terminal should be enclosed in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FF grade SMC junction box (sintex make) confirming to IP 54 suitable for three phase of 12KW model - Swadeep - 02EC12kW3P of make - Nature switch or equivalent in legrand/siemens as approved by GE.

M&L for taking down of old u/s street light any type complete all as specified and as directed.

S&F LED street light 100W made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required complete all as specified and directed.

Supply & fixing LED flood light 200W LED for street light made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required complete all as specified and directed.

Supply & fixing LED flood light 150W LED for street light made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required complete all as specified and directed.

Supply & fixing LED street light 70W LED for street light made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughened glass having IP66 protection 230 Volt with all connected acessories required complete all as specified and directed.

S&F energy efficiant LED invertor dimmable street light 90 watt having aluminium PDC, top maintainable, clear toughned glass, suitable high efficiant secondary lens, LM80 Certified, isolated electronic CC driver RTC enabled, IP66 and IK 05 protection, The security light should operated in following RTC time span of 6PM 90watt ,11PM 27watt, 4AM 45 watt and 6 AM 0 watt characteristic as directed specified.

Supply and fix in replacement 6 sqmm 2 core, LT 1100 volts grade, PVC insulated and PVC sheathed, solid aluminium conductor cable, flat type, 1100 volt in service connections etc complete all as specified and directed.

S&F in repair PVC cable Junction box for street light including 6 Amp MCB SP with aluminium bus bar TPN for controlling the Street Lights complete with pole mounting type size 300x200x105mm with 02 Nos. MS clamp of MS flat iron with bolts, nuts and washer complete all fixed on poles/walls as specified and directed .

S&F in repair GI pipe bracket, made out of 40 mm dia light grade GI pipe, fabricated into shape and size as required, not less than 1.2 metre long complete with 02 Nos. MS clamp of MS flat iron 40 x 6 mm with bolts, nuts and washer complete all fixed on poles/walls as specified and directed.

Material and labour for attending complaints of existing 12 m high highmast light (of any type, make and wattage installed at various locations at AF station jodhpur) received through telephone or in person, identification and rectification of defects by bringing down the fittings on ground or in position including replacement of flexible wire, MH choke, MH/Sodium lamp, ignitor, lamp holder, driver, SPD, PCB, Contactor, MCB, MCCB replacement of old unserviceable light fittings, cleaning of glass/acrylic cover for clear reflection of light, jumper fixing, tightening of loose connections, GI bracket tightening, checking the connection of FRP junction box, light alignment etc, properly insulating the connections complete all as specified & directed by the Engineer-in-Charge. Note for Item No 11.00 :- :- (i) Replacement of unserviceable items shall be measured and paid for seperately as 'Supply only' under repective items of this BoQ . (ii) contractor shall provide/depute sufficient number of electricians and helpers (as directed by Engineer-in-charge) to attend the complaints and rectified the same within 24 hours of receipt of complaints. (iii) contractor manpower shall attend complaints within receipt of complaint from JE E/M and report after completion of complaints and handover a complaint slip to JE E/M with user signature as a record of attending the complaints for payment purposes. (iv) Vehicle, ladder, tools, LT tapes and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement. (v) Any complaint/job given on a particular day shall be repaired/rectified within twenty four hours on receipt of complaint. The rate of recovery against non attending/completing job on same day shall be Rs. 75/- per complaint per day. (vi) Old retrieved material shall be deposited in AGE E/M yard and shall be given to contractor after completion of contract.

M&L for repair of mechanism of High mast and rewinding of three phase tower motor 440volt AC and including dismantling from high mast, transport to workshop for rewinding with existing size of super enameled copper wire, repair of gear, bearing bush etc for running of rope at satisfactory level and reinstallation complete all as specified and directed.

Attending day to day street / security light (LED, MH/Sodium Flood light fittings of any make, installed at Dispersal , Sun Shelter lights, Hanger lights, perimeter lights, watch tower lights etc at AF station jodhpur) complaints received through telephone or in person, identification and rectification of defects by bringing down the fittings on ground or in position including replacement of drivers, Surge Protection Device (SPD), GI Socket, replacement of old unserviceable light fittings, cleaning of glass/acrylic cover for clear reflection of light, jumper fixing, tightening of loose connections, GI bracket tightening, checking the connection of FRP junction box, light alignment, tightening of flood light safety chain in Hangers, properly incsulating the connections complete all as specified & directed by the Engineer-in-Charge. Note for Item No 13.00 :- (i) Replacement of unserviceable items shall be measured and paid for seperately as 'Supply only' under respective items of schedule 'A'/BoQ. (ii) contractor shall provide/depute sufficient number of electricians and helpers (as directed by Engineer-in-charge) to attend the complaints and rectified the same within 24 hours of receipt of complaints. (iii) contractor manpower shall attend daily to recieve complaints at complaint cell at 9.00 AM from JE E/M and report after completion of complaints and handover a complaint slip to JE E/M with user signature as a record of attending the complaints for payment purposes. (iv) Vehicle, ladder, tools, LT tapes and takes as required at site for repair/for making light fittings functional shall be provided by the contractor at his own cost and arrangement. (v) Any complaint/job given on a particular day shall be repaired/rectified within tewnty four hours of complaint received. The rate of recovery against non attending/completing job on same day shall be Rs. 75/- per complaint per day. (vi) Old retrieved material shall be deposited in AGE E/M yard and shall be given to contractor after completion of contract.

Supply only electric driver suitable for 50 watt LED street light of existing make all as specified and directed.

Supply only electric driver suitable for 75 watt LED street light of existing make all as specified and directed.

Supply only electric driver suitable for 100 watt LED street light of existing make all as specified and directed.

Supply only electric driver suitable for 150 watt LED light of existing make all as specified and directed.

Supply only surge protection device rated 5kv for LED type light fitting of existing make all as specified and directed.

S&F in replacement of 2.5 Sqmm 2 core flexible unarmoured copper cable FRLS PVC sheathed for street light to PVC junction box connection complete all as specified and directed.

Material and labour complete removal of existing treatment and applying two coats of cement based paint on PCC/RCC poles (single pole) upto 2.4 meter height from ground level in strip of 0.6 m height in blue and white colour alternately as per existing pattern including cross arm channels painting on the top of poles with alluminium paint including mentioning pole Nos reflector type on each pole complete all as specified and directed.

Material and labour complete removal of existing treatment and applying two coats of synthetic enamel paint on steel poles (single pole) upto 2.4m height as existing on site in strip of 0.6 m height in blue and white colour alternately as per existing pattern including cross arm channels and balance height to be painted with two coat of aluminium paint including mentioning pole Nos reflector type on each pole complete all as specified and directed.

M&L for trimming/cutting the tree branches/ bushes around the LT over head line between two poles and making safe clearance up to 1 metre distance from line wire complete all as specified and directed.

LOKESH ELECTRICAL WORKS CONTRACTOR

GANPATI ENTERPRISES

M/S SHREE BHAIRAV NATH ENTERPRISES

Nvimal Engineers and Contractor

M/s JOG SINGH MATERIALS

VARDHMAN SALES CORPORATION

new india engineers

Siddharth Constructions

Shri Electrical Enterprises