Construction of Govt. Industrial Training Institute (ITI) in village Basantpur in Distt. Kurukshetra (CM Announcement No. 19884 dated 24.06.2017) (Pdg. Street Lighting only).

Amount

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 amp, 25 KA HSR No. 23.22.1.3

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP HSR No. 23.22.2.1

Supply and erection of miniature circuit Breaker /isolator 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCB's TRIPLE POLE HSR No. 23.22.5.6

40 amp to 63 amp. MCB's FOUR POLE HSR No. 23.22.5.8

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR No. 23.22.4.9

Supply and election of Goodridge Almirante type MS pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 1050 mm* 600 mm* 250 mm below ground level. HSR No. 23.27.2

EARTHING AND LIGHTENING ARRESTOR Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR No. 24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR No. 24.1.2

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. HSR No. 24.1.11

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR No. 24.1.13

Laying of underground cable in pipe /existing open/closed trench etc as required:- 2.5 Sq mm to 10 Sq mm 2 to 4 Core HSR No. 24.2.4.1

16 Sq mm to 35 sqmm 2 to 4 Core HSR No. 24.2.4.2

Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core HSR No. 24.2.7.2

25 sqmm to 50 sqmm Cable 2 to 4 Core HSR No. 24.2.7.3

Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections. HSR No. 24.4.3

Supplying and embedding following dia GI pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia HSR No. 24.4.7.1

40 mm dia HSR No. 24.4.7.2

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakellite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement : 1 Stone aggergate: 2 Coarse sand) i/c excavation ,steel rainforcement (Fe 500 ) @ 80 Kg/cum of concrete content, concrete cover 50mm, anchorbolts etc. over a bed of PCC 1:5:10 of required dimensionsfor octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in Charge. 7 Mtr Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm HSR No. 24.4.8.5

Supply and erection of weather proof M.S. box size 20 cm * 15 cm * 10 cm covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement, housed in wall, including the cost of 1 no. 16 amp. 415 volts SP MCB and 2 nos. 63 amp. 415 volts neutral link fixed on hard wood board/ 10 mm Bakelite sheet in the M.S. box including painting and necessary connections. HSR No. 24.4.16

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia HSR No. 24.5.2.3

WIRE Only 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable EL003

G.I. pipes 20 mm dia B1141

Supply of 10 Sqmm 4Core Cable, Grandlay make, armd cable PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-1

Supply of 25 Sqmm 4 Core Cable, Grandlay make, Armd. cable PVC/XLPE insulated (Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-2

Supply & Erection of Single arms bracket made of 40mm dia GI pipe B class ISI 1.50 mtr. Long with coller of GI pipe 75cm Long duly fitted on 7/8Mtr. Otacgonal pole and top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. to complete the job in all respect upto the entire satisfaction of Engineer-incharge. NS-3

Supply and erection of LED Streetlight Luminaries 72 watt of Surya make (Model No. ( SLEUL72W IP66 ( LXN ) ( Lexon ) LED Street light in aluminium PDC housing toughended glass cover wit IP 66 protection the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips/ Bajaj / Hevells / Panasonic /Wipro). NS-4

Supply and erection of LED Flood Light 160 watt of Surya make (Model No. SLEFL160 WIP66 LMS NEO ) ( LMS LEO ) LMS Neo floodlight is a compact LED with system luminous efficacy of 100 Lm/s protection to IP66 with front toughtened glass with discrete high lumen LED complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips/ Bajaj / Hevells / Panasonic / Wipro). NS-5

Supply and erection of 25 watt LED Gate light, Bajaj Make, Model No. BLPTSP 25W NW LED (111741) LED Post top in spherical shape polycarbonate diffuser & IP65 protecsion and accessories required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work and equivalent make Philips Crompton, Surya / Wipro / Panasonic). NS-6

Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Cat No. TL032ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. Make: Hevells / Indo Asian / LNT. NS-7

MS Mansa Solar Energy

M/S PANJETA ELECTRICALS

Som Nath Contractor