Supply and installation of electrics for providing power supply for Phosphoric acid transfer pumps and DM water pumps.

Amount

Supply of 415V, 630A, 3phase and neutral,35MVA, Single front , draw out type Motor Control Center (MCC) complete with all accessories as per specifications and data sheet attached. (Refer Data sheet:32687-13-DA-906-01 .

Erection of 415V, 630A, 3phase and neutral,35MVA, Single front , draw out type Motor Control Center (MCC) complete with all accessories as per specifications and datasheet attached. (Refer Data sheet:32687-13-DA-906-01 .

Supply of Local Control Stations (Type-P1) for ON/OFF control of MV motors with, IP 65, weather proof, cast Aluminium enclosure as per specifications attached. Cable entry shall be suitable for 1 No.10C x 2.5 sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32687-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.

Erection, testing and commissioning of Local Control Stations (Type-P1) for ON/OFF control of MV motors with, IP 65, weather proof, cast Aluminium enclosure as per specifications attached. Cable entry shall be suitable for 1 No.10C x 2.5 sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32687-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.

Supply of Local Control Stations (Type-P2) for OFF control of MV motors with, IP 65, weather proof, cast Aluminium enclosure and Ammeter as per specifications attached. Cable entry shall be suitable for 1 No.5C x 2.5 sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32687-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.

Erection, testing and commissioning of Local Control Stations (Type-P2) for OFF control of MV motors with, IP 65, weather proof, cast Aluminium enclosure and Ammeter as per specifications attached. Cable entry shall be suitable for 1 No.5C x 2.5 sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32687-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.

Supply of Local Control Stations (Type-P3) for ON/OFF control of MV motors with, IP 65, weather proof, cast Aluminium enclosure and ON indiaction for space heater as per specifications attached. Cable entry shall be suitable for 1 No.10C x 2.5 sq.mm and 2Cx4Sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32687-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.

Erection, testing and commissioning of Local Control Stations (Type-P3) for ON/OFF control of MV motors with, IP 65, weather proof, cast Aluminium enclosure and ON indiaction for space heater as per specifications attached. Cable entry shall be suitable for 1 No.10C x 2.5 sq.mm and 1 No 2Cx4Sq.mm XLPE insulated armoured copper cable. Refer data sheet for push button stations (32687-13-DA-91101) attached with this document. Canopy shall be provided for the same suitable for outdoor installation. All external hard wares shall be stainless steel.

Testing, Commissioning and Handing over 415 V motors up to and including 18.5kW non hazardous Motors, as per enclosed specifications/ data sheets/ drawings. The scope shall include mounting of field instruments like speed switches, temperature probes, temperature gauges, etc. if any supplied by the motor manufacturer, megger testing, setting direction of rotation, no load run test, load run test, submission of test reports, etc. The charges indicated below shall include Testing, Commissioning and Handing over of the motors along with associated, ammeter, ON/OFF controls and annunciations if any applicable on control panels/stations. The scope shall also include submission of site test certificates. However transportation & mechanical erection of motors and cable terminations are excluded from the scope of this item. This item is not applicable for single-phase motors in ceiling fans; exhaust fans provided by the bidder. For other requirements refer Annexure.

Testing, Commissioning and Handing over 415 V above 18.5kW non hazardous Motors, as per enclosed specifications/ data sheets/ drawings. The scope shall include mounting of field instruments like speed switches, temperature probes, temperature gauges, etc. if any supplied by the motor manufacturer, megger testing, setting direction of rotation, no load run test, load run test, submission of test reports, etc. The charges indicated below shall include Testing, Commissioning and Handing over of the motors along with associated, ammeter, ON/OFF controls and annunciations if any applicable on control panels/stations. The scope shall also include submission of site test certificates. However transportation & mechanical erection of motors and cable terminations are excluded from the scope of this item. This item is not applicable for single-phase motors in ceiling fans; exhaust fans provided by the bidder. For other requirements refer Annexure.

Supply of Weatherproof, cast Aluminium, junction boxes of following sizes and suitable pedestal mounting - 63A, non flameproof, IP55 suitable for terminating 2Nos 12Cx1.5 Sq.mm XLPE insulated armoured copper Cable as incomer and 1 Nos 24Cx1.5Sq.mm XLPE insulated armoured copper cable as outgoing. The junction boxes shall be used wherever the MV power cable is of higher size than cable entry provided by the motor supplier. The junction boxes shall have cable entries from bottom and internal terminals, links, etc. to interconnect the incoming and outgoing cable as per specifications /data sheet attached. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall exclude supply of cable terminations, cable glands, gland adapters and cable lugs as the same is covered elsewhere. All external hardwares shall be stainless steel. Suitable canopy shall be provided. The junction box shall be provided with required number of connectors suitable for terminating 1.5 sq.mm copper control cable. 20% spare terminals shall be made available in the junction box. The junction box shall be suitable for wall mounting.

Erection, testing, commissioning and handing over of Weatherproof, cast Aluminium, junction boxes of following sizes and suitable pedestal mounting - 63A, non flameproof, IP55 suitable for terminating 2 Nos 12Cx1.5 Sq.mm XLPE insulated armoured copper Cable as incomer and 1 Nos 24Cx1.5Sq.mm XLPE insulated armoured copper cable as outgoing. The junction boxes shall be used wherever the MV power cable is of higher size than cable entry provided by the motor supplier. The junction boxes shall have cable entries from bottom and internal terminals, links, etc. to interconnect the incoming and outgoing cable as per specifications /data sheet attached. Suitable cable glands and cable adapters are to be used for terminating the cable. The scope of supply shall exclude supply of cable terminations, cable glands, gland adapters and cable lugs as the same is covered elsewhere. All external hardwares shall be stainless steel. Suitable canopy shall be provided. The junction box shall be provided with required number of connectors suitable for terminating 1.5 sq.mm copper control cable. 20% spare terminals shall be made available in the junction box. The junction box shall be suitable for wall mounting.

Supply of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3.5C x 400 sq.mm. As per Data sheet 32687-13-DA-93001 Refer sl no. 2 of Annexure for further requirement.

Erection, Testing, Commissioning and Handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3.5C x 400 sq.mm. Refer sl no. 2 of Annexure for further requirement.

Supply of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 185 sq.mm.As per Data sheet 32687-13-DA-93001 Refer sl no. 2 of Annexure for further requirement.

Erection, Testing, Commissioning and Handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 185 sq.mm. Refer sl no. 2 of Annexure for further requirement.

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 3C x 6sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 6sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 3C x 4sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 4sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 2C x 4sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured,As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 2C x 4sq.mm

Supply of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 4C x 16 sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 4C x 16 sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 3C x 2.5 sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 3C x 2.5 sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 12c x 1.5 sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 12c x 1.5 sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 5c x 2.5 sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 5c x 2.5 sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 10c x 2.5 sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10c x 2.5 sq.mm

Supply of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, As per Data sheet 32687-13-DA-93001 PVC outer sheathed cable of size 24c x 1.5 sq.mm

Erection, Testing, Commissioning and Handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 24c x 1.5 sq.mm

Supply of 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable.

Erection, Testing, Commissioning and Handing over of 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3.5C x 400 sq.mm. cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 185 sq.mm. cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 4C x 16sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 6 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 4 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 2C x 4 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 2.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 2.5sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.10C x 2.5 sq.mm

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 5C x 2.5sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.5C x 2.5 sq.mm

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 12C x 1.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 24C x1.5 sq.mm cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Cable termination on panels, on motors/Junction boxes, local control stations etc., testing, commissioning and handing over of 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable, conforming to specifications, data sheets, drawings, relevant Indian Standards, code of practices etc. to the entire satisfaction of the owner and of the following sizes. The scope shall include making cable entries on gland plates on equipment, wherever required, fixing lugs, electrical connections, cable glanding (where applicable) and gland earthing. The scope shall also include supply and installation of all required accessories such as, crimping type tinned copper cable lugs, bolts, nuts, washers, ferrules, gland earth clamps, strips etc. (The cable termination rate shall include gland earthing cable termination also.) Supply of cable glands (where required), and gland earthing cables are excluded from the scope, for which separate rates quoted shall be applicable.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3½c x 400sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 3C x 185sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, Aluminium conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed 4C x 16sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x6 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x4 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 3C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 10C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 12C x 1.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 24C x1.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 600V, 1pair, 1.5 sq mm armoured and screened FRLS signal cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 2C x4 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of double compression Nickel plated brass cable glands suitable for 650/1100V, copper conductor XLPE insulated, extruded PVC sheathed, armoured, PVC outer sheathed cable of size 5C x 2.5 sq.mm cable. The gland shall be suitable for cable entries with ET/NPT threads as required. The bidder shall verify the entry thread, type of hazardous enclosure etc., to find out the actual type of gland required. The scope shall exclude erection, testing, commissioning, associated cabling, earthing, cable and earth terminations, and structural works, as rates quoted elsewhere shall be applicable. Separate erection charges are not applicable for this item.

Supply of PVC covered Aluminium conductors of size 150 sq.mm,( connection to nearby existing earth pit etc.)

Erection of PVC covered Aluminium conductors of size 150 sq.mm,( connection to nearby existing earth pit etc.)

Supply of PVC covered Aluminium conductors of size 70 sq.mm, (Main earth connection)

Erection of PVC covered Aluminium conductors of size 70 sq.mm, (Main earth connection)

Supply of PVC covered Aluminium conductors of size 16 sq.mm (For motors LCS ,LDB etc.)

Erection of PVC covered Aluminium conductors of size 16 sq.mm (For motors LCS ,LDB etc.)

Supply of 100 mm wide, 6mm thick Aluminium junction plate of various lengths suitable for connecting required number of earth conductors. The scope includes cutting to required sizes and fixing the junction plate on walls/racks/supports, etc. as well as punching of boltholes. For general requirements refer Annexure. Also refer Drg. No. 32687-13-GE-00 255.

Erection of 100 mm wide, 6mm thick Aluminium junction plate of various lengths suitable for connecting required number of earth conductors. The scope includes cutting to required sizes and fixing the junction plate on walls/racks/supports, etc. as well as punching of boltholes. For general requirements refer Annexure. Also refer Drg. No. 32687-13-GE-00 255.

Supply of Weatherproof, 45W LED type well glass lighting fixtures with double compression cable glands, and all accessories . All external hardwares shall be stainless steel. (FCG Type No: LW 51125 or equivalent. Refer sl no. 4 of Annexure.

Erection of Weatherproof, 45W LED type well glass lighting fixtures with double compression cable glands and all accessories . All external hardwares shall be stainless steel. (FCG Type No: LW 51125 or equivalent. Refer sl no. 4 of Annexure.

Supply of 415V, 32A Ph & N, Sheet steel Lighting Distribution Board with one number 32A, 4 pole MCB and ELCB (30mA) as incomer side and 12 Nos 10A Single Pole MCBs as out going feeders. The DB shall have separate buses for phase, neutral and earth. The DB shall be double door type. (All MCBs shall be of C curve and 10 kA short circuit capacity. (DBs shall conform to IS 13032). The earth bus shall be suitable for taking individual earth leads for each circuit. The gaskets used if any, shall be of neoprene only. Spare slots provided for MCB mounting if any shall be properly blanked. (components of DB shall be LEGRAND/HAVELLS/ INDO ASIAN/ C&S/ L&T/ABB/ STANDARD make). Refer sl no. 4 (e) of Annexure for further requirement.

Erection of 415V, 32A Ph & N, Sheet steel Lighting Distribution Board with one number 32A, 4 pole MCB and ELCB (30mA) as incomer side and 12 Nos 10A Single Pole MCBs as out going feeders. The DB shall have separate buses for phase, neutral and earth. The DB shall be double door type. (All MCBs shall be of C curve and 10 kA short circuit capacity. (DBs shall conform to IS 13032) The earth bus shall be suitable for taking individual earth leads for each circuit. The gaskets used if any, shall be of neoprene only. Spare slots provided for MCB mounting if any shall be properly blanked. (components of DB shall be LEGRAND/HAVELLS/ INDO ASIAN/ C&S/ L&T/ABB/ STANDARD make). Refer sl no. 4 (e) of Annexure for further requirement.

Supply of 230 V, single phase and neutral, 16A, socket outlet in cast Aluminium IP 55 weather proof enclosure with integral TPN switch plug socket arrangement (2P+E configuration), cable glands, cable entries, plug top, duplicate earthing terminals, safety interlock to prevent accidental removal of plug while the unit is ON, provision for looping to other unit etc. The incoming and looping cable size shall be 3C x 4 sq.mm and 3Cx2.5Sq.mm YFY/ YWY cable . All external hardwares shall be stainless steel.

Erection of 230 V, single phase and neutral, 16A, socket outlet in cast Aluminium IP 55 weather proof enclosure with integral TPN switch plug socket arrangement (2P+E configuration), cable glands, cable entries, plug top, duplicate earthing terminals, safety interlock to prevent accidental removal of plug while the unit is ON, provision for looping to other unit etc. The incoming and looping cable size shall be 3C x 4 sq.mm and 3Cx2.5Sq.mm YFY/ YWY cable . All external hardwares shall be stainless steel.

Supply of 415 V, 3 phase and neutral, 32A, socket outlet in cast Aluminium IP 55 weather proof enclosure with integral TPN switch plug socket arrangement (4P+E configuration), cable glands, cable entries, plug top, duplicate earthing terminals, safety interlock to prevent accidental removal of plug while the unit is ON, provision for looping to other unit etc. The incoming cable size shall be 4C x16 sq.mm AYFY/AYWY cable . All external hardwares shall be stainless steel. Sealing plug for unused cable entry shall be provided.

Erection of 415 V, 3 phase and neutral, 32A, socket outlet in cast Aluminium IP 55 weather proof enclosure with integral TPN switch plug socket arrangement (4P+E configuration), cable glands, cable entries, plug top, duplicate earthing terminals, safety interlock to prevent accidental removal of plug while the unit is ON, provision for looping to other unit etc. The incoming cable size shall be 4C x 16 sq.mm AYFY/AYWY cable . All external hardwares shall be stainless steel. Sealing plug for unused cable entry shall be provided

Supply and fabrication of structural steel items as per drawings enclosed for racks, risers and tray supports, pedestals, DB supports, supports for other equipment, etc. as required. The supply scope shall include supply of MS steel sections of various sizes as required. For other requirements see Annexure. The concrete footing for supports shall be extra under separate item as indicated elsewhere. Payment shall be made on the basis of measurement of dimensions of structural steel items actually installed multiplied by the unit weight applicable for various sections. The quantities indicated being of preliminary nature, contractor shall assess the actual site requirement and supply accordingly.

Erection, fixing, epoxy painting and handing over of structural steel items as per drawings enclosed for racks, risers and tray supports, pedestals, DB supports, supports for other equipment, etc. as required. The painting shall be with two coats of epoxy paint over 2 coats of suitable epoxy primer. The scope of work shall be as noted below. For other requirements see Annexure. The erection scope shall include transportation, handling at site, storage, inspection, safe custody, welding, cutting, making bolt holes, and painting with two coats of epoxy paint over 2 coats of suitable epoxy primer after cleaning with wire brush including supply of paint, etc. Chipping, cement grouting, re-plastering of walls, floors, ceilings, columns etc. of concrete or brick work for supporting the structural items, supply of structural items, bolts, nuts, washers, cement, sand, etc. are also included in the scope of the work. The bolts, nut, washers shall be of hot dipped GI. The rate indicated below shall be applicable also for structural if any issued by PURCHASER. Payment shall be made on the basis of measurement of dimensions of structural steel items actually installed multiplied by the unit weight applicable for various sections. The quantities indicated being of preliminary nature, contractor shall assess the actual site requirement and supply accordingly.

Supply of 150mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, SS tray couplers and SS hardware viz bolts/nuts/washers, etc. As per Data Sheet:32687-13-DA-914 01 drawings enclosed. The scope of work shall be as noted below; The scope shall include supply of bends, tees, jointing plates, bolts, nuts, washers, etc as required. However for measurement, no separate charges shall be applicable for required bends, Tees, jointing plate etc. Refer Annexure for general requirement.

Erection of 150mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below; The erection scope shall include transportation, handling at site, storage, inspection, safe custody, fixing to structural supports, jointing wherever required, etc. The GRP trays are to be laid over fabricated MS cable racks. The scope shall also include, supply of bolts, nuts, clamps, washers, etc. The bolts, nut, washers shall be of SS.

Supply of 300mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, tray couplers and SS hardware viz bolts/nuts/washers, etc. As per Data Sheet:32687-13-DA-914 01 and drawings enclosed. The scope of work shall be as noted below; The scope shall include supply of bends, tees, jointing plates, bolts, nuts, washers, etc as required. However for measurement, no separate charges shall be applicable for required bends, Tees, jointing plate etc. Refer Annexure for general requirement.

Erection of 300mm wide size Pultruded ladder type GRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below; The erection scope shall include transportation, handling at site, storage, inspection, safe custody, fixing to structural supports, jointing wherever required, etc. The GRP trays are to be laid over fabricated MS cable racks. The scope shall also include, supply of bolts, nuts, clamps, washers, etc. The bolts, nut, washers shall be of SS.

Supply of 750mm wide size Pultruded ladder type GRP/FRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, tray couplers and SS hardware viz bolts/nuts/washers, etc. As per Data Sheet:32687-13-DA-914 01 and drawings enclosed. The scope of work shall be as noted below; The scope shall include supply of bends, tees, jointing plates, bolts, nuts, washers, etc as required. However for measurement, no separate charges shall be applicable for required bends, Tees, jointing plate etc. Refer Annexure for general requirement.

Erection of 750mm wide size Pultruded ladder type GRP/FRP cable trays, with 4mm thick, 100mm side runner, 3000 mm long, complete with bends, tray couplers and SS hardware viz bolts/nuts/washers, etc. as per drawings enclosed. The scope of work shall be as noted below; The erection scope shall include transportation, handling at site, storage, inspection, safe custody, fixing to structural supports, jointing wherever required, etc. The GRP trays are to be laid over fabricated MS cable racks. The scope shall also include, supply of bolts, nuts, clamps, washers, etc. The bolts, nut, washers shall be of SS.

Supply of 150mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure.

Erection - installation, laying and fixing of 150mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure.

Supply of 100mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure.

Erection - installation, laying and fixing of 100mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure.

Supply of 50mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure.

Erection - installation, laying and fixing of 50mm NB (GI-class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements refer Annexure.

Supply - Canopy for motors for weatherproof protection. The canopy shall be made of 2 mm Aluminium sheets bent suitably and fixed to a steel frame fabricated using MS structural members (refer drg. no. 32687-13-GE-00 256). . For general requirements srefer Annexure. Canopies shall be fabricated and installed only for that equipment as directed by site-in charge.

Erection - Canopy for motors for weatherproof protection. The canopy shall be made of 2 mm Aluminium sheets bent suitably and fixed to a steel frame fabricated using MS structural members (refer drg. no. 32687-13-GE-00 256). The MS items shall be epoxy painted with two coats of paint over suitable primer. The cost shall include supply of all accessories including aluminum sheets, MS structural, GI bolts, nuts and washers and fabrication and painting as required. For general requirements srefer Annexure. Canopies shall be fabricated and installed only for that equipment as directed by site-in charge.

Excavation and back filling of cable trenches for burying cables. pipes, earth conductors etc.

Supply and spreading of approved fine river sand/stone dust / M sand as per IS383 in cable trenches, including all labour and materials, as per specifications of this tender and directions of engineer-in-charge.

Supply of well burnt bricks of 50 mm thickness for cable protection inside trenches.

Erection- Installation of well burnt bricks of 50 mm thickness for cable protection inside trenches.

Chipping of concreted area/ concrete slab, etc for laying cables or pipes and rebuilding the chipped area to original condition. The scope shall include supply of all materials necessary for rebuilding. The charges furnished here shall cover all items applicable including supply of materials. For other requirements refer Annexure.

Making wall openings in brick wall of depth 300mm or below for the purpose of laying cables, and replastering. The charges furnished shall cover supply of all required materials except cement For other requirements refer Annexure.

Removal of cover slab of existing built up cable trench for cable laying,reinstallation and sealing of RCC cover slab over cable trench (with suitable sealing compound) after laying of cables.

Supply and installation of 1:2:4 PCC for cable tray supports, PB Station pedestals, etc. The scope shall include supply of all materials like sand, stone, etc. The charges furnished shall cover supply of all materials required. For other requirements refer Annexure.

Supply of 19 mm. NB (GI-Class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. (for installing well glass light fittings/ as platform lighting pole)

Erection - installation, laying and fixing of 19 mm. NB (GI-Class B). The scope shall also include fabrication, bending, welding, etc wherever applicable. The erection rate indicated below shall be applicable also for pipes if any issued by FEDO/Owner. For other requirements see of 1.0.0 above.(for installing well glass light fittings/ as platform lighting pole).

Supply and erection of 1.1 kV grade insulation mat as per IS 15652:2006 of thickness not less than 2.5 mm and 1000 mm wide.

Labour rates for Helper with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc.

Labour rates for Electrician with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc.

Labour rates for Electrical supervisor with tools on 8hour (normal day time) shift basis for attending any work as directed by site in charge/owner during execution of the contract. The charges shall include supervision and supply of consumables such as insulation tapes ferrule etc.

Labour rates for Electrical supervisor at site on over time basis (after normal shift time of 8 hour)

Labour rates for Electrician at site on over time basis (after normal shift time of 8 hour)

Labour rates for Helper at site on over time basis (after normal shift time of 8 hour)

HELSA ELECTRICALS PRIVATE LTD (BID ID -3162439)