Anganwadi construction in arukil ward

Amount

Anganwadi construcion in ward3

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Royalty for good earth

Stone for masonry work

Solid blocks of size 40x20x20cm

Twisted steel/deformed bars

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Adjustable span ESO+SI (2.35-3.40)

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Safeda ballies 125 mm diameter

Stone Aggregate(single size): 10 mm nominal size

Fine sand (zone IV)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

200 mm Aluminium aldrop

Iron hooks & eyes 100 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Chromium plated Brass screws 30 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Chromium plated Brass screws 25 mm

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Acrylic exterior paint

Exterior primer

Multi surface paint

Special primer (C.W)

Plastic emulsion paint

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

PTMT - Towel Rail (600 mm)

Second class teak wood in scantling

Brass bib-cock-15 mm dia

Brass stop-cock 15 mm dia

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Polyethylene water storage tank with cover and suitable locking arrangemnet

C.P. Brass angle valve 15 mm

PTMT - Soap Dish/Holder 138x102x75 mm

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 40 mm outer dia. 10kgf/cm2

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 110 mm outer dia. 4kgf/cm2

PVC 45 degree Elbow 63 mm dia

PVC bend 63 mm dia

PVC vent cowl 63 mm dia

PVC end cap 63 mm dia

PVC Elbow 110 mm dia

PVC Tee 110x110x110mm dia

PVC vent cowl 110 mm dia

SREEKALA.S