Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.8 LAccepted-AOC HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹49.0 L+₹7.1 L (17.0%)Rejected-Finance | L2 | Rejected-Finance Become L2 |
Tender Value
Refer Docs
EMD Value
₹85,300
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur Mission Chariali Tezpur, Assam
SPL REPAIR TO LT FEEDER IN ZONE 3A AND 3B AND CERTAIN SANCTIONED WORKS OF SAA (PHASE-12) AT TEZPUR UNDER GE (S) TEZPUR
2022_MES_539747_1
8684
Open Tender
Civil Works
Item Rate
180 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹85,300
Yes
18 Oct 2022
21 Jul 2022
19 Aug 2022
21 Jul 2022
17 Aug 2022
4 Aug 2022
60 days
Amount
Surface dressing n.exc 15 cm deep for soft and loose soil, complete all as specified and as directed.
Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in soft/lose soil for foundation etc, complete all as specified and as directed.
Excavation in post holes each n.exc 0.5Cum getting out in soft loose soils, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm and removing surplus soil to ad distance n.exc 50m and making good surface, complete all as specified and as directed.
Returning, filling incl spreading levelling watering and well ramming in layers not exc 25 cm for soft/lose soil, complete all as specified and as directed.
Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed.
M & L for Cement concrete in foundations , filling and mass concrete type D-2, 1:4:8, complete all as specified and as directed.
M&L for Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation filling mass concrete/couping Complete all as specified and as directed.
M & L for Hard core of guage not exc 63 mm with broken stone/boulders deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface, complete all as specified and as directed.
M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping water thrugh and like including watehreing, slightly rounded or hamfered angles and throating as directed including formwork Complete all as specified and as directed.
M&L for 100 mm thick PCC 1:2:4 type B1 using (20 mm graded aggregate) as in floors and pavings including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed.
M & L forming 12 mm thick expansion joints filled with pre fromed bituminous filler and top 30 mm primed and sealed with compound Grade 'A' all as specifed and directed.
S&F steel work in tubular truss including Post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, roller conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.
S&F rolled sections as in main cress beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or connecting plates cofirming to Fe-410-w (Gde-E250) quality-A, complete all as specified and as directed.
M & L Mild steel plates ,plain or chequered , 5 mm thick or over FE -290 (Gde E-165) Complete all as specified and as directed.
S&F for Mild steel screw bolts of dia 5 to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550 Mpa as in roof covering shed etc fixed with self tapping screws, complete all as specified and as directed.
All as per item No 16 above but plain sheet for ridge ,gutter,Eaves board etc fixed with self tapping screws , complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for PCC 1:2:4 ( 20 m graded stone aggregate) as in path/pavings/approch ramp all as specified and directed
Material and labour for sub Class B bricks, best quality straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm Complete all as specified and as directed.
M & L for brickwork with sub-class 'B' bricks straight or curved on plan exc. 6m mean radius in half brick work built in cement mortar (1:4) complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, road side drains includng use & waste of fromwork complete all as specified and directed.
M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint on wall. Complete all as specified and as directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.
Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work, complete all as specified and as directed.
All as per Ser Itme no 25 above but In fillests, rails , posts, refters and purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.
M&L 2nd class HW in scantling fixed clean swan in framed work, complete all as specified and as directed.
M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails, complete all as specified and as directed.
S&F for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type cranked hook bolts with grade of zinc coating 275, complete all as specified and as directed.
S&F for 0.63mm thick plain, gavanised, mild steel sheeting, in ridges and flashings with grade of zinc coating 275, complete all as specified and as directed.
Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters, complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed.
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters (without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
Taking down chowkhat with shutter/without taking off shutter from the frame n exe 1.50 each, complete all as specified and as directed.
Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.
S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement, complete all as specified and as directed.
S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress, complete all as specified and as directed.
S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified
S&F 35mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side, complete all as specified and as directed.
S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars) edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a) Complete all as specified and as directed.
S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each, complete all as specified and as directed.
S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification. Complete all as specified and as directed.
Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.
S&F 50mm butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified and directed
S&F MS 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and as directed.
S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring all as specified and directed
S&F 150mm long aluminium handle, cast type, anodised , complete all as specified and as directed.
S&F 100mm long aluminium handle, cast type, anodised Complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts of extruded section 100 mm long and fixed with screws, complete all as specified and as directed.
S&F 100mm Butt hinges medium weight cold rolled mild steel , complete all as specified and as directed.
S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
S&F Coloured Glazed ceramic tiles 450 x 350 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:4. Complete all as specified and as directed.
Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed
M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm, in dado/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4, complete all as specified and as directed.
M & L for 75 mm PCC 1:3:6 C-1 using ( 20 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed
M&L 100 mm thick,Cement concrete, type B-2, (1:2:4), 40 mm graded aggregate as in sub base even and smooth all as specified and directed
M&L for Vitrified parking tiles of any colour/patern 30cm x 30 cm x 7 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes, complete all as specified and as directed.
Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.
Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
Taking up or down 20/25 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,
S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,
Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed.
Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F in repairs 15mm dia stop valve fancy type chromium plated with long shank and cup (conealed rype) screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
Supply and fix sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd.
S&F in repair tubular Towel rail chromium plated 600mm long 20 mm dia D type complete all as specified and as directed.
Supply and fix waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.
Supply and fix 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.
Supply and fix 15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.
S&F in repair Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified and directed.
Dismantling and breaking up PVC drain pipes of 110mm dia or below jointed in CM and taking out of trenches, complete all as specified and as directed.
Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
S&F for PVC (SWR) with access door bends 110mm dia, complete all as specified and as directed.
S&F for PVC (SWR) with access door bends 75 mm dia, complete all as specified and as directed.
S&F PVC (SWR) junction 75 mm bore single ( single t) equal or unequal all as specified and directed.
S&F in repairs 75mm PVC (SWR) floor trap, including jointing with solvent cement, complete all as specified and as directed.
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.
S& F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares, complete all as specified and as directed.
M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and smooth without using extra cement , complete all as specified and as directed.
M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement , complete all as specified and as directed.
M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L Applying two coats of Oil bound distemper by smart painting method to old surfce wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..
M&L Applying one coat of Oil bound distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
M&L for Newly plastered surfaces of external wall with applying thin layer of wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coats of damp shield primer by smart painting method. complete all as specified and as directed by Engineer-in-Charge.
M&L for Old wall surface including preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and applying two coats of weather coat water proofing paints over a coats damp shield primer by smart painting method . complete all as specified and as directed by Engineer-in-Charge.
M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.
M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.
Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.
Taking down unserviceable/rusted cross-arms, channel or angle sections, nut bolts etc, complete all as specified and as directed.
Dismantling insulators any type and size, complete all as specified and as directed.
Dismantling of ACSR conductor of any size and type, complete all as specified and as directed.
Dismantling of steel tubular poles, struts of any size, complete all as specified and as directed.
M&L for bricks common burnt sub class B designation for protection of cable complete all as spfd & directed.
M&L for natural local river sand for cable protection, complete all as specified and as directed.
Supplying and fixing in replacement of weather proof flat twin core 6.0 sqmm 1100 volts grade cable PVC insulated stranded aluminium conductor and overall PVC sheathed, suspended by insulating hangers not more than 1 metre apart including 4 mm dia GI suspension wire, complete all as specified and as directed.
Supplying and fixing in replacement of weather proof flat twin core 10.0 sqmm 1100 volts grade cable PVC insulated stranded aluminium conductor and overall PVC sheathed, suspended by insulating hangers not more than 1 metre apart including 4 mm dia GI suspension wire, complete all as specified and as directed.
M&L for earthing in replacement complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earths lead wire 4mm size by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work Complete all as specified and as directed.
M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth strip 32 x 6 mm as earthing conductor by means of bolts, nuts, check nuts and washers of GI and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing lead of 32 x 6mm GI earth strip, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.
Supply, laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanized steel striop or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminimum conductor of size 25 sq mm 3.5 core, complete all as specified and as directed.
Supply, laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanized steel striop or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminimum conductor of size 16 sq mm 4 core, complete all as specified and as directed.
Supply, laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanized steel striop or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminimum conductor of size 10 sq mm 4 core, complete all as specified and as directed.
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 2 core, complete all as specified and as directed.
M&L for ACSR (Aluminium conductor steel reinforced) conductor of required size, complete all as specified and as directed.
M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and as directed.
M&L for pin type porcelain vetreous, white, brown or green insulator including one galvanized iron washer and one galvanized iron nut 100 mm height, 65 mm dia for 1100 volts, complete all as specified and as directed.
M&L for schacle type porcelain vetreous, white, brown or green insulator including one galvanized iron washer and one galvanized iron nut 75 mm height, 90 mm dia for 1100 volts, complete all as specified and as directed.
M&L For LT lightening arresters for outdoor use, non-linear resistor type, horn gap and chocking coil, maximum working pressure 1100 volts, complete all as specified and as directed.
M&L for GI Pipe medium grade for cable protection or GI pipe bracket suitable for street light fittings of size 40 mm, complete all as specified and as directed.
Supply, lay and fix in replacement 40 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed.
Supply and fixing in replacement LED street light fitting 60 watt 230 volt AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant including thermal management in multiple optics complete with IP65/66 protection Complete all as specified and as directed. Make-Havells, Cat No ENDURACITYLITEPLAT PLUSSL60WLED757SASYBOPC or equivalent make of Philips,/Bajaj/Surya/CG/HPL
Supply and fixing in replacement LED Bldg security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including GI Pipe 40 mm dia bracket 1.2 mtr in length bent to shape of 120 degree with MS flat bracket 2 Nos, washers, nuts, bolts etc. Complete all as specified and as directed. Make-Havells, Cat No ENDURACITYLITEPLAT PLUSSL25WLED757SASYBOPC or equivalent make of Philips,/Bajaj/Surya/CG/HPL
M&L for cradles, continuos earth wire, hexagonal/rectandular, fabricated with 3.15/4 mm dia GI wire, complete all as specified and as directed.
M&L in replacement for stay assembly complete with accessories as shown in electrical plate no 01 (loop type insulator, stay clamps, excavation and concrete measured separately), dia of stay rod 20 mm, complete all as specified and as directed.
S&F steel tubular swaged poles complete with cast iron base plate, finial taper plug, nuts and screws as specified type 410 SP-31, 9 mtr long, complete all as specified and as directed.
Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.
Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified.
Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.
Taking down old U/S Flourescent/LED light fittings any type and size , complete all as specified and as directed.
M & L for point wiring for one light /fan/Bell point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through rigid non metallic concealed/surface conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.
All as per Ser item No.137 above but for 5 amps socket on same board with other switches
All as per Ser item No.137 above but for 5 amps socket on independent board.
All as per Item No 137 above but for one bell point controlled by one, one 5 amp switch
All as per Ser item No.137 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.
M & L for point wiring with 2.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS 100 Volts grade drawn through PVC Casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly
M&L Bell push, flush type, 5 amp, complete all as specified and as directed.
M&L for Bell, AC, 230 volts, single pole, complete all as specified and as directed.
Material and labour in replacement for switch 5 amps switch flush type one way single pole, complete all as specified and as directed.
Supply and fix in replacement for switch socket combination outlet flush type, 5 Pin, 5 amps, complete all as specified and as directed.
Supply and fix in replacement for Socket outlet 2 in 1, 5 Pin, 5/6 Amps, complete all as specified and as directed.
Supply and fixin replacement switch socket combination outlet universal type 5 pin 5/16 amps, complete all as specified and as directed.
Supply and fix in replacement ceiling rose surface backelite 65x50 mm having 3 terminals, complete all as specified and as directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. all as specified and directed
Supply and fix replacement of Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FR, copper cable 1100 volts grade stranded copper conductor cable drawn through and non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed including with all fittings and accessories and 1X4.0 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly, complete all as specified and as directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed.
S&F LED 9 W B22 CDL LED LAMP Colour Temperature 6500K all as directed. Make of Havells Cat No. LHLDEUEEMC8R009 Or equivalent Surya/Bajaj/philips
Supply & fix in replacement purpose surface and wall mounted LED batten 20 Watt 4ft with polycarbonate housing & integrated electronic driver. Make: of Havells cat no. LHEXBLP7PN1W020 or equivalent/Surya/Jaquar
S & F in replacement MCB DB TPN 4 way double door complete concealed in wall all as directed.
S & F in replacement MCB DB Single pole and neutral 4 way double door with 200 amps rated bus bar complete concealed in wall all as directed.
Supply and fixing in replacement 240V, 10KA, 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutral and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning as specified and directed. Make: Havells/Legrand/L&T/Standard/HPL
Supply and fixing in replacement 415V, 10KA, 'B' curve miniature circuit breaker (MCB) of TPN and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning as specified and directed. Make: Havells/Legrand/L&T/Standard/HPL
Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 Amps, in the MCB DB Complete with connection testing and commissioning. Make: Havells/Legrand/L&T/ Standard/HPL
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as directed. Make-Crompton cat No :300mm TRANSAIR or equivalent make of Havells/Bajaj/Usha
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Five star rated with brushless direct current motor(BLDC) complete with hook and down rod all as directed. Make-Crompton cat No :1200mm ENERGION RIVIERA (without remote) or equivalent make of Havells/Bajaj/Usha
Supply and fixing Tubes, 'Medium grade' 50 mm dia bore galvanised, with all fittings, welding, fixed in walls both side of pipe and drilling for hanging of Ceiling fan on GI pipe including making good to disturbed surfaces of walls/floors complete all as directed
Supply and fixing Wall mounting fan 300 mm sweep. Make: Crompton/Usha/Havells/ Almonard
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make-Cromption-Arno New-5S
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp all as directed
Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I, complete all as specified and as directed.
Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms), complete all as specified and as directed.
Supply and fix in repairs Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
Supply and fix in repairs Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified and as directed.
Supply and fix Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 2 1 0 g m s), complete all as specified and as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
M/S Manjit Singh
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .