Supply, Installation, testing and Commissioning of Integrated Building Management System IBMS and Operation and Maintenance Non - comprehensive of Building Management System BMS

Amount

Supply, Installation, Testing and Commissioning of ANALOG ADDRESSABLE FIRE ALARM SYSTEM

Supply, Installation, Testing & Commissioning of Intelligent Fire Alarm Control panel. The Panel should be 10 loop networkable control panel with 640 character LCD display with each loop capacity of minimum 300 devices and detectors per loop and can support upto 3180 Addressable devices per node. The system shall have the capability to support over 200 control panels to work together in a peer to peer high speed network. The response time shall be less than 10 seconds. System can be configured without taking the panel offline. The System shall have Graphical User Inrterface,Failure of Fire Panel CPU shall not result in failure of GUI. The panel shall work in degrade mode in case of CPU failure. Panel shall have 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be compatible for integration with analog/digital Voice evacuation system and shall be complete with all accessories required as per specifications. The panel shall have network card included inside the panel for peer to peer communication with other display devices like Graphic screen, repeater panel etc. The Panel CPU will support 3180 devices/detectors maximum. The panel shall have 5000 event history-logging capability with 1000 dedicated evant logs for fire alarm. Panel shall have QWERTY keypad for programming. The panel complies with latest Fire codes and standards, (UL 864, 10th Edition) & FM Approved. (Vendor to be submit the Battery backup calcualtion - with necesary civil work and other mounting brackets accessories (panel to panel soft connectivity to be considered) - Supply, Installation, Testing & Commissioning of Intelligent Fire Alarm Control panel. The Panel should be 10 loop panel expandable upto 29 loop Networkable analogue addressable type fire alarm control panel with 80 (4 x 20) character LCD display with each loop capacity of 252 devices / detectors per loop and can support upto 3366 Addressable devices per node. The system shall have the capability to support over 212,000+ points on a single network. The control panel shall have provision for up to 63 control panels to work together in a peer to peer high speed network. The response time shall be less than 10 seconds. System can be configured without taking the panel offline. The System shall have 3D event management interface to display facilities organized by building, floor, and device. The Panel shall have inbuilt port for Printer and Annunciator. The Panel shall have Built-in Ethernet Port for Webserver, BACnet and 3D color graphics software, The panel shall have inbuilt either 110 VAC/ 230 VAC power supply with 12 Amps having Automatic battery charger 24VDC charging capacity of maximum 100AH Lead Acid maintenance free batteries, sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condtion. The panel shall be compatible for integration with analog/digital Voice evacuation system and shall be complete with all accessories required as per specifications. The panel shall have network card included inside the panel for RS485 communication with other display devices like Graphic screen, repeater panel etc. The Panel CPU will support 2500 devices/detectors maximum. The panel shall have 5000 event, history-logging capability with online and offline reports. The panel complies with latest Fire codes and standards, (UL 864, 9th Edition) & FM Approved. (Vendor to be submit the Battery backup calcualtion - with necesary civil work and other mounting brackets accessories (panel to panel soft connectivity to be considered)

Supplying, Installation, Testing & Commissioning of intellegent addressable Self Multi Sensor Detectors (Photoelectric smoke cum Thermal detector) with standard mounting base, LED, Rotary Address Switch to programme the detectors from 01-159, with BASE complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. Both the Detectors & Base shall be UL Listed & FM Approved.

Supplying, Installation, Testing & Commissiong of intelligent addressable Plug-in type rate of rise Heat Detector with standard mounting base, 360 Degree View LED, Rotary Address Switch to programme the detectors from 01-159, with BASE complete with MS Powder coated Junction Box for mouting on Surface / on False Ceiling / Below False Floor, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. Both the Detectors & Base shall be UL Listed & FM Approved.

Supply, Installation, Testing & Commissioning of Addressable Manual Pull Station (Single action) complete with all mounting accessories.

Supply, Installation, Testing & Commissioning of Sounder cum strobe rated at 75 dBA to 80dBA @ 3m for Audible annunciation and minimum 75cd flashing at 1Hz for visual indication

Supply, Installation, Testing & Commissioning of control module - contact rated at 24V DC, 2A for hooter & strobe.

Supply, Installation, Testing & Commissioning of Addressable Control Module for AHU with Rotary Address Switch and all mounting accessories, and all mounting accessories, complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. The Devices shall be UL Listed & FM Approved - Tenant fire alarm panel,AHU,ACCESS control, Public address system Fault & Alert,,Fire damper.

AC Contactors (or) Interposing relay as required at site for Comfort AHU & other units Tripping as per specification

Supply, Installation, Testing & Commissioning of Addressable Monitor Module for Sprinkler Flow Switch & WFD Monitoring with Rotary Adddress Switch and all mounting accessories, complete as required. The Devices shall be UL Listed & FM Approved.- Sprinkler flow switch,Local scare alarm,

Supply, Installation, Testing & Commissioning of Fault Isolator Module for isolating shorted, dewired and loose circuits between two successive fault isolators, Isolator module should not acquire address on SLC loop. all mounting accessories, complete with MS Powder coated Junction Box for mouting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling. The Devices shall be UL Listed & FM Approved.

Supply and Surface laying of 2 core x 1.5 sq.mm Red colour twisted pair shielded multi strand ATC armoured FRLS cable

Supply and Surface laying of 25mm MS conduit for MCP cable drop. Conduit to be concealed in the wall, costing should including chipping and refinsihing the wall.

Supply, Installation, Testing & Commissioning of Door position sensor & Local scare alarm with powder coated box and reset key for Local scare alarm panic bar as per specification

Supply, Installation, Testing & Commissioning of networkable active Repeater Panel with a 6" touch screen or 640-character Liquid Crystal Display (LCD) for monitoring the Fire Alarm System. This shall provide acknowledge & Reset the event and programmed custom messages as displayed on the main panel. The panel shall be UL listed and FM approved.

Supply, Installation, Testing & Commissioning of Response Indicator with matching screws complete with GI Junction box, Cable lugs at cable end and ferruling.

Supply, Installation, Testing & Commissioning of Supply, Installation of Power supply unit.

Supply, Installation, Testing and Commissioning of Public Address System.

Supply, Installation, Testing & Commissioning of 6W Recessed Ceiling speakers with following features:-Speaker Drive 5", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 6 / 3/ 1.5 at 100v, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting hardware & accessories.(floor wise false ceiling area)

Supply, Installation, Testing & Commissioning of 6W wall mount speakers with following features:-component 7.5", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 5/10W, Effective frequency range 150-15kHz (BS6840), SPL@1m/1W=90dB, Peak SPL 98dB complete with necessary mounting hardware & accessories.(floor wise non false ceiling area & substation )

SITC of 10W wall mount speakers with following features:-component 6.5", complete with necessary mounting hardware & accessories.(Basement) - EXISITNG Speaker to be connected with new cabel and conect the same in the new PA console

SITC of 10W Weatherproof horn speakers with following features:- Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 10/15W, Effective frequency range 250-18kHz (BS6840), SPL@1m/1W=102dB, Peak SPL 112dB complete with necessary mounting hardware & accessories. (External)

Supply, Installation, Testing & Commissioning,Digital Voice Evacuation remote paging microphone with 16 Zone capacity and Expandable upto 96 Zones by adding Keypad The Microphone shall have Reset/Cancel, All Call & Call Buttons. CAT6 Cable Communication up to 600 meter. Built in Monitor Speaker and DIP Switches to set up ID and Priorities. Digital Voice Evacuation Master controller with built in Amplifier. The System shall meet the standards of BS EN54 - 32 & EN 60849. The System Shall have Built in 500W Class-D Amplifier and it should be capable for the EVAC, Paging, PA and BGM functions. The Controller shall have SD card option to store the EVAC and Alert Voice Message. The Controller shall have Speaker line supervision record out and amplifier auto changeover. The Controller shall have following features: Separate Zone volume control at the front side of panel, Status indications on the Panel for EVAC,Fault ,AC,DC ,Fault, ALERT & Fireman mic, Zone capacity up to 96 Zones, 8 programmable Control Input and output, Fireman Microphone with High Priority, THD<1%, Frequency response 80Hz - 20kHz, Up to 1000 Record files, 100V Class-AB Speaker Output. 42U 19", 800mm deep closed rack with front glazed door with 6way 6/13A horizontal power strip- Netrack/UMS

Supply, Installation, Testing & Commissioning of 480W RMS Single Channel Power Amplifier with Switch power technology for power electricity saving, Separate PFC Design for highest reliability, Separate Power Supply System. Amplifier shall have Following Features: 480W RMS per Channel, Amplifier Output 100V and 70V, Supply input AC 220 +/- 10% - 50/60Hz, Short Circuit, Power, Temperature, Overload Protection, Auto Cooling Fans. THD <0.1%, Frequency Response 60Hz - 15kHz, AC & DC Fuse, SNR >70dB.

Supply and Surface laying of 2 core x 1.5 sq.mm black colour twisted pair shielded multi strand ATC armoured FRLS cable

Supply, Installation, Testing and Commissioning of Access Control System:

Supply, Installation, Testing and Commissioning of intelligent controllers and peripheral interface devices must provide an open architecture family of products that enables a choice of host software system vendor without replacement of hardware.Supply, Installation, Testing, Commissioning of the Linux based intelligent controller must provide decision making, event reporting, and database storage as a hardware platform. Two reader interfaces shall provide control for two doors in addition to supporting a total of 64 readers, paired and or alternate reader configurations with peripheral interface devices. The intelligent controller shall communicate with the host via on-board 10BaseT/100BaseTX Ethernet port and support TLS encryptionE.The intelligent controller must support a wide range of reader technologies, including OSDP, Wiegand and magnetic stripe.The intelligent controller shall control two physical barriers and up to four (using OSDP) or two (using Wiegand) readers. 250,000 Cardholder capacity ; 50,000 Transaction buffer ; Supports up to 615 inputs and 388 outputs. Power Supply Unit and battery backup. as per specification

Supply, Installation, Testing and Commissioning ofSupply, Installation, Testing, Commissioning of the peripheral interface device that shall control two physical barriers and up to four (using OSDP) or two (using Wiegand) readers. The peripheral interface device shall be able to utilize a cryptographic module that can encrypt/decrypt communication with the intelligent controller, supporting AES encryption using a minimum 256 bit key length. E.Inputs: Seven unsupervised/supervised, standard EOL.A.Outputs: Four relays, Form-C with dry contacts Product compliance with FCC,UL-294,IEC 62368-1 and RoHS. Supply with all necessary power supply, battery back-up and Enclosure / intelligent controller which sSupports any combination of up to 16 I/O or reader module,Maximum 32 reader using (16 x dual reader module)with Standard 50,000 cards, 50,000 transactions capacity,Anti passbac- Hard, Soft, Local, Global, Timed and Two card rule,certification UL, CE, FCC / 2 Reader controller panel with power supply unit and enclouser, 8 Supervised inputs, 6 Relay outputs ,Time Zones 255,access level 255,holiday 255, AntipassbackHard/Soft/Timed , certification UL, CE, FCC

Supply, Installation, Testing and Commissioning 125 KHz based Proximity type Card Readers with SS Back Plate / with following specification Dimensions : 3.15" H x 1.57" W x 0.50" D (80mm x 40mm x 12.8mm);Max. Read Range: 3" (7.6cm) ;Environment: Indoor/Outdoor weather-resistant;Operating Voltage: 5.0 - 16 VDC (works down to 4.25 VDC);Power Supply Type:Linear type recommended;Interface to Controller: Max. cable distance to host: 500 ft./150 m (Wiegand output); Temperature: -25º F to 145º F/-31º C to 63º C; Regulatory Approvals : USA and Canada: FCC Part15B, Industry Canada RSS-210, UL294; Europe: CE Mark Approval.

Removing & refixing of existing 125 KHz based Proximity type Card Readers with SS Back Plate as per specification

Electro Magnetic lock with required mounting accessories, Z & L brackets and with external (surface / recess mountable) door contacts , Door buzzer for time delay as per specification

Emergency Release switch

Push button

Supply, Installation, Testing, Commissioning of Intelligent Access Management Software shall be designed and configured in such a way so that single point failure will have no degradation in overall functionality, shall have distributed Architecture, shall have both Access & Time Attendance system in single interface and the one database only, ACS software must be integrated with Multiple OEMs Access Controllers & Smart Card Readers, shall support elevator access management and as per technical specification / Access control and basic Attendnace Software[First IN & Last Out],ntuitive web interface for access management, with embedded Help tool ,Unrestricted number of cardholders and system users ,Unrestricted number of sites and access points ,NOTIFICATIONS AND REPORTING Email, SMS ,INTERACTIVE FLOOR PLANS ,ELEVATOR CONTROL ,PHOTO ID PRODUCTION , LOCKDOWN , Two Card rule,CUSTOM CARDHOLDER FIELD TEMPLATES , TRACKING AND MUSTER REPORTS,GUARD TOUR REPORTS and should support CCTV & Intrusion intergration ,Supports VMWare 6.5 to help leverage existing IT infrastructure and server assets

Supply installation Testing and Commissioning of access control server: Intel Xeon Intel® Xeon® E3-1275 v6 or better with 16 GB RAM or better server. It should run on latest Windows® server platform Enterprise 64-bit or latest. It should have 1TB storage. Shall support Dynamic Host Communication Protocol (DHCP) and Network Time Synchronisation Protocol (NTP) functionality. It shall have Mapping function. It should have in built plugins to integrate third party systems. 1 DVI-I + 1 HDMI + 1 VGA, max 2 Monitor Output, Dual Hot Swappable power supply.

Supply installation Testing and Commissioning of Operator workstation Intel Core i7 or better Min 3.4 GHz, 8MB Cache or better with 16 GB RAM or better operator workstation. It should run on latest Windows® platform Enterprise 64-bit or latest. It should have 1TB storage. 1 DVI-I + 1 HDMI + 1 VGA, max 2 Monitor Output

Proximity Cards

Supply and Laying of CAT 6 cable with PVC conduit

Supply and Laying of 8 Core x 0.75 sq mm multi strand, ATC, shielded Cable as per specification

Supply and Laying of 4 Core x 0.75 sq mm multi strand, ATC, shielded Cable as per specification

Supply and Laying of 1" FRLS PVC Conduits, on the wall, columns, cable trays false ceiling etc.,with GI spacers, saddles including associated civil works

Supply, Installation, Testing and Commissioning of Gate Management System:

Supply, Installation, Testing and Commissioning of • Waist height turnstile with high quality and reliable electromechanical unit. • Cabinet finish: SS 304 brushed stainless steel with cut out for reader at the top. The cut out is covered in high quality black PMMA and lit by LED light • Cabinet dimensions: Normal: 900 mm long X 230 mm wide X 998 mm tall • Barriers: 3 collapsible arms made of high quality SS304 rods and an aluminium powder coated hub. • Passage width: 500 mm • Tailgating: Rotating arms will move only once to allow an authorized person to pass through. If any unauthorized person tries to follow, his attempt is rebuffed by the arms which are mechanically locked. • IP43 rated • Throughput: 15 - 20 users per minute • Tested as per CE standards with neccessary mounting and civil work.

Retractable Waist Height Flap Barrier Bi-directional - Flap Barrier 4 STD Lane + 1 Wide lane. • Optical barrier with retractable flaps made of high quality PMMA. • Cabinet finish: SS 304 brushed stainless steel with cut out for reader at the top. The cut out is covered in high quality black PMMA and lit by LED light • Cabinet dimensions: • Normal: 1212 mm long X 315 mm wide X 1015 mm tall • Wide: 1212 mm long X 491 mm wide and 1015 mm tall • Barriers: Retractable panels made up of high quality PMMA with contrast marking. The panels are back lit with green LED light. • Passage width: 500 mm for standard lanes and 900 mm for Handicap lane • Throughput: 25 - 30 users per minute • Tailgating detection: audible and visible alarm when an unauthorized person attempts to pass through. • Industry leading 6 sensors for Safety & Security • 20-minute Battery Backup. • Tested as per CE standards . With necessary mounting accessories and necessary civil work.

Retractable Waist Height Flap Barrier Bi-directional - Flap Barrier 3 STD Lane + 1 Wide lane. • Optical barrier with retractable flaps made of high quality PMMA. • Cabinet finish: SS 304 brushed stainless steel with cut out for reader at the top. The cut out is covered in high quality black PMMA and lit by LED light • Cabinet dimensions: • Normal: 1212 mm long X 315 mm wide X 1015 mm tall • Wide: 1212 mm long X 491 mm wide and 1015 mm tall • Barriers: Retractable panels made up of high quality PMMA with contrast marking. The panels are back lit with green LED light. • Passage width: 500 mm for standard lanes and 900 mm for Handicap lane • Throughput: 25 - 30 users per minute • Tailgating detection: audible and visible alarm when an unauthorized person attempts to pass through. • Industry leading 6 sensors for Safety & Security • 20-minute Battery Backup. • Tested as per CE standards . With necessary mounting accessories and necessary civil work.

Retractable Waist Height Flap Barrier Bi-directional - Flap Barrier 2 STD Lane + 1 Wide lane. • Optical barrier with retractable flaps made of high quality PMMA. • Cabinet finish: SS 304 brushed stainless steel with cut out for reader at the top. The cut out is covered in high quality black PMMA and lit by LED light • Cabinet dimensions: • Normal: 1212 mm long X 315 mm wide X 1015 mm tall • Wide: 1212 mm long X 491 mm wide and 1015 mm tall • Barriers: Retractable panels made up of high quality PMMA with contrast marking. The panels are back lit with green LED light. • Passage width: 500 mm for standard lanes and 900 mm for Handicap lane • Throughput: 25 - 30 users per minute • Tailgating detection: audible and visible alarm when an unauthorized person attempts to pass through. • Industry leading 6 sensors for Safety & Security • 20-minute Battery Backup. • Tested as per CE standards . With necessary mounting accessories and necessary civil work.

IP 54 3.5 mtrs boom barrier Modular Powder Coated White RAL 9010 with Red reflective strips. Power supply for the same should be 230+/- 10% VAC, 50 Hz. Opening & Closing Time 1.3 seconds for Boom Length up to 3.5 Meters . Aluminium Housing with Base frame in SS-304 for maximum protection against corrosion. internal parts will be rust & corrosion free metals or alloys of high strength with suitable Epoxy coating as applicable. 1500 mm long booms shall made of extruded aluminium with octagonal profile 100mm. X 55mm. X 1.6 mm that can withstand a wind velocity of 10BFT (Beaufort scale). The Booom shall be Powder Coated White RAL 9010 with Red reflective strips. The barrier shall use a BlockableDC High Torque Drive in combination with CAN bus communication standard interfaced Controller. It shall offer LCD Display & Graphic User Interface for easy control setting. Possibility for integration via standard user interfaces. S/W for Detection of Presence of Vehicle in Loop or in the path of Infrared Safety Sensors available. Loops or Sensors to be used to prevent barriers from closing on the vehicle. with proper pedestal, Necessary fitting accessories & civil work to mount the box.

IP 54 1.5 mtrs boom barrier Modular Powder Coated White RAL 9010 with Red reflective strips. Power supply for the same should be 230+/- 10% VAC, 50 Hz. Opening & Closing Time 1.3 seconds for Boom Length up to 3.5 Meters . Aluminium Housing with Base frame in SS-304 for maximum protection against corrosion. internal parts will be rust & corrosion free metals or alloys of high strength with suitable Epoxy coating as applicable. 3500 mm long booms shall made of extruded aluminium with octagonal profile 100mm. X 55mm. X 1.6 mm that can withstand a wind velocity of 10BFT (Beaufort scale). The Booom shall be Powder Coated White RAL 9010 with Red reflective strips. The barrier shall use a BlockableDC High Torque Drive in combination with CAN bus communication standard interfaced Controller. It shall offer LCD Display & Graphic User Interface for easy control setting. Possibility for integration via standard user interfaces. S/W for Detection of Presence of Vehicle in Loop or in the path of Infrared Safety Sensors available. Loops or Sensors to be used to prevent barriers from closing on the vehicle. with proper pedestal, Necessary fitting accessories & civil work to mount the box.

Supply, Installation, Testing and Commissioning of CCTV System

Supply, Installation, Testing and Commissioning of 4 MP IR Vari focal Bullet Network Camera with necessary mounting bracket & fitting accessories - Perimeters Surveillance

Supply, Installation, Testing and Commissioning of 4 MP IR Fixed Network Bullet Camera with necessary mounting bracket & fitting accessories - Inside Building & Sub Station

Supply, Installation, Testing and Commissioning of 4 MP Color Fixed Bullet Network Camera - Basement Parking

Supply, Installation, Testing and Commissioning of 4 MP -Automatic Number Plate Camera (ANPR) Bullet Camera - Entry & Exit of Vehicles with necessary half height pole, mounting bracket & fitting accessories with proper civil work with pedestal.

Supply, Installation, Testing and Commissioning of 4 MP IR Fixed Network Dome Camera with necessary mounting bracket & fitting accessories - Inside Buildings, Substation inside & Main building Common Areas

Supply, Installation, Testing and Commissioning of 4 MP Fixed Mini Dome Network Camera with necessary mounting bracket & fitting accessories -Inside Lifts

Supply, Installation, Testing and Commissioning of Wireless bridge with necesary mounting bracket & fitting accessories - Connecting Lift Cameras

Supply, Installation, Testing and Commissioning of 6 MP Fish Eye Network Camera with necesary mounting bracket & fitting accessories - Lift Lobby

Video Wall Solution (4X2 Matrix)

Supply, Installation, Testing and Commissioning of 46" Video Wall Module with HDMI Cables - Control Room with necesary mounting bracket & fitting accessories

Supply, Installation, Testing and Commissioning of Video Wall Bracket - Control Room with necesary fitting accessories

Supply, Installation, Testing and Commissioning of Decoder - Control Room with necesary mounting bracket & fitting accessories

Video Management Software with License

Supply, Installation, Testing and Commissioning of Video Management Software Base License

Supply, Installation, Testing and Commissioning of VMS Channel Camera License

Supply, Installation, Testing and Commissioning of VMS ANPR Camera Channel License

Supply, Installation, Testing and Commissioning of VMS Entrance & Exit Module License

Supply, Installation, Testing and Commissioning of VMS Smartwall Module License

Supply, Installation, Testing and Commissioning of VMS BI Report Module License

VMS Server & Client Hardware

Server Hardware: Processor with Intel® Xeon® E-2124 Microsoft Windows Server® Ketboard and Mouse

Client Hardware: Processor:Intel ® CoreTM i7-6700k @ 4 GHz 24" inch Monitor, Keyboard and Mouse

Network Storage for Cameras

Supply, Installation, Testing and Commissioning of 64 Channel Network Video Recorder with 8 HDD Slots - Control Room with 42U X 2 nos rack (90 days backup)

Supply, Installation, Testing and Commissioning of 8TB Hard Disk

Supply, Installation, Testing and Commissioning of 4 Port Layer 2 manageble POE Network switch (8 PORT-10/100/1000 BASE-T & 2 NOS. SFP PORT FOR UPLINK)

Supply, Installation, Testing and Commissioning of 8 Port Layer 2 manageble POE Network switch (8 PORT-10/100/1000 BASE-T & 2 NOS. SFP PORT FOR UPLINK)

Supply, Installation, Testing and Commissioning of 16 Port Layer 2 manageble POE Network switch (16 PORT-10/100/1000 BASE-T & 2 NOS. SFP PORT FOR UPLINK)

Supply, Installation, Testing and Commissioning of 56 Port Layer 3 manageble POE Network switch (24 PORT-10/100/1000 BASE-T & 24 NOS. SFP & PORT)

Supply, Installation, Testing and Commissioning of OFC Transreveiver Module (1500nm)

Supply, Installation, Testing and Commissioning of CAT6, 8-Port loaded, Straight Jack Panel for Active data

Supply, Installation, Testing and Commissioning of CAT6 SL Series Patch cords Panel Side

Supply, Installation, Testing and Commissioning of CAT6 SL Series Patch cords Camera Side

Supply, Installation, Testing and Commissioning,Laying of Information outlet with 2 port 110 style faceplate

Supply, Installation, Testing and Commissioning,Laying of CAT6 UTP Cable with PVC conduit

Supply, Installation, Testing and Commissioning,Laying of CAT6 UTP Cable with 25mm MS Conduit with all necessary accessories with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work (for external camera)

Supply, Installation, Testing and Commissioning,Laying of OFC Cable 12 Core - Single mode with 25mm MS Conduit with all necessary accessories with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work (for external camera)

Supply, Installation, Testing and Commissioning of Outdoor Junction Box with IP54 or better

Supply, Installation of Outdoor 6mtr pole with necesary adjustable hanging mounting bracket. With necesary pedestal, civil woor (3mtrs should be under the ground 1.5 mtrs should be above the ground. Cable entry provision should be there for the pole. Maintanence purpose opening should be there in the pole

Supplying, Installing, Testing & Commissioning of the following ( Make Schneider (France)/Honeywell (United States)/Siemens (Germany)/Jhonson & Control)

Central Works Station :

Supply,Installation,testing and commissioning of Central Server : Intel XEON Based CPU, Quad Core. 32GB RAM, 1 TB HDD, Pre Loaded with Windows Server 2020, Firewall and AntiVirus, DVD RW and Complete with Tower Mouting Capability

Supply,Installation,testing and commissioning of BMS Workstation : Intel i7 Processor, 16GB RAM, 500 GB HDD, Pre Loaded with Windows 10 or Higher OS, Firewall and Antivirus, DVD RQ and with Additional Graphics Card with 4GB Video RAM and Dual Monitor Display 32" Output on HDMI Interface, with PC Speakers, wireless mouse & keyboard etc

Supply,Installation,testing and commissioning of Laser Jet Printer A4

Software and System Units :

Supply,Installation,testing and commissioning of the Web Based software for BAS as per specifications for the building automation system along with unlimited user license including web based energy auditing software for data management and analysis with pre designed reportsas required, Providing all necessary interface of the following system/equipment including providing necessary integrators/ modules (RS-232/ modbusBacnet/Lonworks output to be provided by other vendors)

Supply,Installation,testing and commissioning of Energy Magemenet Module software for BTU Meters and Energy Meter

Supply,Installation,testing and commissioning of Trane Chiller Communication module or Controller to provide all critical parameters to be available for BMS. Protocol need to be of any standard protocols like Bacnet or Modbus

Supply,Installation,testing and commissioning of Web Based system interface modules consisting of gateways,Third party integrator & other interface units as required as per specifications. The units shall be housed in vandal proof lockable and secure wall mounted MS cabinets to be supplied along with the controllers.

Supply,Installation,testing and commissioning of Energy Meter Integration + Lift Integration

Supply,Installation,testing and commissioning of Integration unit for BTU Meters & other third party units

DDC CONTROLLERS (Schneider: AS-P, AS-B, MP-C, IP-IO / Honeywell Trend / Siemens PX Controllers)

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings - A South & A South East

2 comfort & 2 Precision

1 comfort & 3 Precision

1 comfort & 1 Precision

2 Comfort

4 Comfort

3 Comfort

Single Comfort

Staircase Pressurization fans

Liftwell Pressurization Fans

Toilet Exhaust Fans

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings - A North & A North East (Schneider: AS-P, AS-B, MP-C, IP-IO / Honeywell Trend / Siemens PX Controllers)

2 comfort & 2 Precision

1 comfort & 3 Precision

1 comfort & 1 Precision

1 comfort & 2 Precision

2 Comfort & 1 Precision

2 Comfort

3 Comfort

Single Comfort

Double Precision

Staircase Pressurization fans

Liftwell Pressurization Fans

Toilet Exhaust Fans

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings C&D North (Schneider: AS-P, AS-B, MP-C, IP-IO / Honeywell Trend / Siemens PX Controllers)

2 comfort & 2 Precision

1 comfort & 2 Precision

2 Comfort

4 Comfort

3 Comfort

Single Comfort

Staircase Pressurization fans

Liftwell Pressurization Fans

Toilet Exhaust Fans

Smoke Exhaust Fans

Atrium Fans

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings C&D South (Schneider: AS-P, AS-B, MP-C, IP-IO / Honeywell Trend / Siemens PX Controllers)

2 comfort & 2 Precision

1 comfort & 2 Precision

2 Comfort

4 Comfort

3 Comfort

Single Comfort

Staircase Pressurization fans

Liftwell Pressurization Fans

Toilet Exhaust Fans

Smoke Exhaust Fans

Kitchen Exhaust Fans

Atrium Fans

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings for Chiller System

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings for TS Tanks

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings for DG System

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings for Water Tanks

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings for Fire Fighting System

Supply,Installation,testing and commissioning of Direct Digital Controller (DDC) for with Enclosure with necessary accessories & Fittings for Basement ventillation system

FIELD DEVICES (Honeywell / Dwyer / Omicron)

Supply, Installation ,Testing & Commissioning of Duct type T&RH Sensor with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Duct type Temperature Sensor with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of DP Switch for AHU Filters with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of DP Switch for AHU Run status Monitoring with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Duct type Co2 Sensor with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of 3 way valve actuator for 40 mm pipe lines ( Include removing old valve and fixing new valve with all accessories like bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of 3 way valve with actuator for 50 mm pipe lines ( Include removing old valve and fixing new valve with all accessories like bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of 3 way valve with actuator for 65 mm pipe lines ( Include removing old valve and fixing new valve with all accessories like bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of 3 way valve with actuator for 100 mm pipe lines with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of BTU Meter for 40 mm with connectivity with BMS ( Include removing old BTU Meter and fixing new BTU Meter with all accessories like necessary pipe , bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of BTU Meter for 50 mm with connectivity with BMS Include removing old BTU Meter and fixing new BTU Meter with all accessories like necessary pipe , bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of BTU Meter for 65 mm with connectivity with BMS ( Include removing old BTU Meter and fixing new BTU Meter with all accessories like necessary pipe , bolt nut, flanges etc))

Supply, Installation ,Testing & Commissioning of BTU Meter for 100 mm with connectivity with BMS with necessary accessories

Supply, Installation ,Testing & Commissioning of Water Flow switches with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Immersion Temperature Sensor with thermowell with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Water level transmitter with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of FlameProof level transmitter with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Absolute water pressure transmitter with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Clamp on BTU Meter for 25 MM to 700 MM sizes with necessary accessories with necesary fittings

Supply, Installation ,Testing & Commissioning of Chiller motorised valve with actuator Sizes 200 MM ( Include removing old valve and fixing new valve with all accessories like bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of Chiller motorised valve with actuator Sizes 300 MM ( Include removing old valve and fixing new valve with all accessories like bolt nut, flanges etc)

Supply, Installation ,Testing & Commissioning of 6 Zone Fire Damper control panel with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Fire Damper actuator with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Ahu MCC panel alteration work for Auto/Manual status with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Indoor co2 Sensor with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of Ambient temperature , RH & CO2 with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of DP Switch for Fans with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of DP switch for HRW with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Supply, Installation ,Testing & Commissioning of CO Sensor with necessary accessories (if neccesary Removing the existing and replacing the new with necesary fittings )

Networking

Supply, Installation ,Testing & Commissioning of 16 port Gigabyte Network switch with SFP Ports with necessary accessories with necesary fittings

Supply, Installation ,Testing & Commissioning of Optical fibre media convertor with necessary accessories with necesary fittings

Supply, Installation ,Testing & Commissioning of 6 Core Multimode optical fiber cable with necessary accessories with necesary fittings

Supply, Installation ,Testing & Commissioning of of Cat6 Cable with necessary accessories with necesary fittings

Supply & Installation of 25mm MS Conduit with all necessary accessories with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work

Supply, Installation ,Testing & Commissioning of Optical fiber accessories with necessary accessories with necesary fittings

CABLES & CONDUITS

Supply, Installation, Testing & Commissioning of 2 C X 1.0 SQ. MM unarmoured , multistrand, screened cable with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work

Supply, Installation, Testing & Commissioning of 4 C X 1.0 SQ. MM unarmoured , multistrand, screened cable with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work

Supply, Installation, Testing & Commissioning of 2 C X 1 SQ. MM unarmoured , multistrand, sheilded cable with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work

Supply, Installation, Testing & Commissioning of 25mm MS Conduit with all necessary accessories with necessary clamp,screws, junction bow, gland, if required wall chipping, relaying, wall opening & refixing and necessary civil work

Supply and Installation of 200mm wide x 50mm height x 2mm thickness - G.I. Perforated type HRCA sheet steel Hot Dip Perforated type including the Supports cost for supporting the Cable Tray in MS angle, Structure, Channel, wall, Roof Ceiling with supporting rod & Cable shafts with necessary support & civil work

Supply, Installation ,Testing & Commissioning of Graphical designing , supply,Testing & Commissioning charges

Note : The rate inclusive of all Civil, Electrical ( respective UPS ) works. The rate inclusive of removal of exisitigng system, re installation is wherever applicalble and Supply & Installation of new items as per technical spec/BOQ. Bidder has to submit the work method statement for all individual activites along with tender submission and while doing execution also..Specific on AHUs, Chiller, BMS room activities etc. CCTV - Camera should have the NDAA clause Contractor shall use make in India items wherever applicable

Man Power Cost for One Year

O&M Incharge

Technician IBMS

a) Salary statement for the previous months with Bank statement/Bank Transfer details to corroborate the payment. b) Having paid due wages to all the workmen engaged in the provision of the services during the previous month (Copy of wage-slips & muster roll to be enclosed). c) If the bidder quotes contractor service charges less than 2% the bid shall be declared disqualified unresponsive and will not be considered. Further, the bid of the firm/company quoting “Contractor Service Charges” less than 2% of the bill value. d) Service charge quoted by bidder should include all expenditure on providing the Resources/managerial/supervisory/administrative services by all means to get the work done through the deployed staff. (Non-realistic/Vague quotation of this may amount to disqualification) e) No deduction, except statutory deductions, shall be done from the monthly payments of the manpower provided by the Contractor. f) Service Charge quoted by bidder shall remain fixed during contract period (i.e.1 year) and no escalation of service charge is permitted. The bidder should keep above facts in mind while quoting the service charge. Escalation of 5% will be provided if contract is renewed. g) Colum M is Basic Component of O&M Man Power Cost.

Siemens Limited