GENERAL Adichanalloor Ela Annual maintenance of Adichanalloor LI Scheme in Adichanalloor Panchayath for the year 2024 25 General Civil Work

Amount

Detailed Estimate

2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

OD22452/2024-2025:Engaging mancoolies for removing silt and debris deposited in leading channel ,cleaning around the Pump house and other emergency work

OD22453/2024-2025:Supplying good quality gear oil incliuding all cost etc complete as per the direction of department officer at site.

OD22454/2024-2025:Supplying good quality Gland Packing

OD22455/2024-2025:Supplying good quality packing grease including all cost of labour, conveyance etc complete as per the direction of officers at site.

OD22456/2024-2025:Supplying good quality transformer oil for starter including all cost, conveyance etc complete as per the direction of officer at site

OD22457/2024-2025:Supplying good quality of IR sheet for foot valve

OD22458/2024-2025:Fabricating and erecting foot valve of size 20mm top and 400mm bottom with 12mm MS plate flange plate, support plate with 12mm MS sheet including welding facing step cutting and providing 12mm MS nut and bolt etc and all other allied works including painting and convey to pump house and fitting to suction pipe and trail run etc as per the direction of officers at site.

OD22461/2024-2025:Dismantling 30 HP pump and motor and removing suction and delivery pipe from position and conveying to workshop for rectification of motor and winding etc as per the direction of departmental officers at site.

OD22459/2024-2025:Fitting the pump, motor, suction and delivery pipe in position line and level providing IR sheet between joints of pipes including all cost of materials, labour etc complete as per the direction of officers at site

OD22575/2024-2025:Re winding of 30 HP motor using good qualitycopper wire etc as per the direction of departmental officers at site.

OD22460/2024-2025:Setting 30HP pump and motor, suction and delivery pipe in position line and level ,providing IR Sheet in between joints of pipes including all cost of materialsexcluding IR sheet, labour charges etc complete as the direction from departmental officers at site

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.65.1:Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

60.63.2:FRP SHUTTERS - Supplying and fixing FRP shutters of suitable size to with stand the design and max water pressure as prescribed by the departmental officer and installing the FRP channels provided in the grooves already arranged and as per the direction of departmental .officers.

60.63.1:FRP SHUTTERS - Supplying and fixing FRP Channels of "C" profile and sill beam size 100x100x100 mm with flange of 50 to 75mm depth in the grooves already arranged and as per the direction of departmental .officers.

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

ANIRUDHAN S (BID ID -2166276)

Bidder Name

SREEKESHKUMAR

ANIRUDHAN S