Supply, Installation, Testing and Commissioning of Lighting System (Stage Lighting) at Kerala Kalamandalam

Supply, Installation, Testing and Commissioning of Lighting System at Kuttambalam, Kerala Kalamandalam.(Approved make are listed in the Compliance Certificate).

PAR-NEL. LED ENGINE: 200W CHIP ON BOARD COLOUR TEMPERATURE: 3200K BEAM ANGLE: 25 DEGREES OPTICS: FRESNEL LENS POWER INPUT : 230V/50HZ SIGNAL INPUT : 3 / 5 POLE XLR. HOUSING: DIE CAST ALUMINIUM

PROFILE SPOT LED SOURCE: 250W COLOUR TEMPERATURE: 3200K BEAM ANGLE: 26/36 DEGREES OPTICS: DOUBLE CONVEX / PLANO CONVEX, POWER INPUT: 230V/50HZ SIGNAL INPUT : 3POLE XLR, HOUSING : DIE CAST ALUMINIUM.

LED PAR RGBW - Fanless: Source: 10W X 9 QUAD LED. COLOURS: RED, GREEN, BLUE & COOL WHITE. BEAM ANGLE : 25 DEGREES. POWER INPUT : 230V/50HZ SIGNAL INPUT: 3/5 POLE XLR. HOUSING : CAST ALUMINIUM

200W BLINDER LED SOURCE : 100W X 02 COLOUR TEMPERATURE: 3200K BEAM ANGLE : 60 DEGREES LENS: FIXED OPTICS: PLAIN; POWER INPUT : 230V/50HZ, SIGNAL INPUT : 3POLE XLR. HOUSING : DIE CAST ALUMINIUM.

DMX Controller Specifications DMX512/1990 Standard 4 dmx Universe, 20+ slider for manual control of channels DMX in/out: 3 pin male/female XRL. Power input: Powercon /iec.

DMX AMPLIFIER Specifications 1 in 4 out Dmx signal booster, Signal in & through: 3 pin male/female XRL. Power input: AC 90-230V

Mountng Clamps: Heavy dyty metal C- clamp for lighting trusses, 30-45mm clamping range, load capacity- 25Kg

Safety Bond: Black coated 3mm steel wire rope safety bond of 550mm length (loop to loop) and 15kg capacity with 6mm black carbine hook.

DMX512 Signal Cable with connectors 120 ohm impedance, low capacitance, and double (foil and braid) shield

Power & Signal Gang Box with LEC socket mount connector - 16 Amps

5/3 pole Signal Mount Socket Mount Connector

LED PC SPOT LIGHT CE Certified 200W LED PC Spot Light with latest RDM technology for user friendly operation with below specifications: • Light Source : Single LED COB Source • Color Temerature : 3200K, CRI & TLCI Value > 95 • Power cable: 3 core 1 sq. mm. copper PVC insulated • Channels: 1/2/3 DMX-512 Channel Modes • Beam Angle : 22° or 50° Motorised zoom • Control mode: RDM, DMX512 & Manual, Master/Slave, Auto run • Fully RDM Compliant in DMX Mode for the Lighting Console mentioned in this project. • Lux output at 2 Mtr : > 6,900 Lux @ 22° & > 1,400 Lux @ 50° • Dimming: 0 - 100% Electronic Dimming • Power and DMX: Loop in and loop out compulsary • DMX in & Out Through : 5 Pin XLR connectors

Identification Name Plate79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish.

Fixed Stage Light Bar Stage Light Bar, length 6 Mtrs made using MS 40NBPipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.

Power Distribution Box Well designed 12 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, 25A TPN incomer, SP Mcb's and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete.

XLR Termination Plug 5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination.

Power Cable PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm.

Cable Raceways MS perforated tray of Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement.

Internal earthing copper bare conductor of size 14 SWG for power network related to work coming under our scope.

Supply, Installation, Testing and Commissioning (SITC) of incomer power feeder for the Distribution Board, comprising 25A, 3-phase incomer arrangement with suitable protection, suitable for a connected load of up to 10 kW, and providing a Distribution Board conforming to relevant electrical standards, along with 4-core × 6 sq.mm copper armoured cable of required length (maximum 50 meters), including glands, lugs, terminations, earthing, dressing, and all necessary accessories for complete and safe electrification as per applicable electrical regulations and standards.

Execution of complete electrical wiring and installation works for the lighting system, including supply, laying, fixing, connection, testing, and commissioning of all associated electrical components, cables, conduits, and equipment; provision of scaffolding, carpentry, fabrication, and all allied civil works required for proper installation, alignment, and finishing; supply and fixing of all installation hardware and consumables such as clamps, connectors, glands, lugs, ferrules, welding rods, fasteners, and other miscellaneous materials; restoration of affected surfaces to neat and clean condition; removal and safe disposal of debris, dismantled materials, and site waste; testing, commissioning, fine-tuning, and optimisation of the installed lighting system to ensure safe, efficient, and optimal performance; and completion of the entire work strictly in accordance with site conditions, approved drawings, technical specifications, and the directions of the University Engineer-in-Charge, complete in all respects and to the full satisfaction of the Engineer-in-Charge.

The following items shall be provided with supply and testing of the equipment in intact condition, together with warranty. (Approved make are listed in the Compliance Certificate).

PAR-NEL. LED ENGINE: 200W CHIP ON BOARD COLOUR TEMPERATURE: 3200K BEAM ANGLE : 25 DEGREES OPTICS: FRESNEL LENS POWER INPUT : 230V/50HZ SIGNAL INPUT : 3 / 5 POLE XLR. HOUSING : DIE CAST ALUMINIUM

PROFILE SPOT LED SOURCE : 250W COLOUR TEMPERATURE: 3200K BEAM ANGLE : 26/36 DEGREES OPTICS: DOUBLE CONVEX / PLANO CONVEX, POWER INPUT: 230V/50HZ SIGNAL INPUT 3POLE XLR, HOUSING : DIE CAST ALUMINIUM.

LED PAR RGBW -Fanless : Source: 10W X 9 QUAD LED. COLOURS: RED, GREEN, BLUE & COOL WHITE. BEAM ANGLE : 25 DEGREES. POWER INPUT : 230V/50HZ SIGNAL INPUT : 3/5 POLE XLR. HOUSING : CAST ALUMINIUM

Par 64- par size: par64 ·black body material: glass · usage/application: stage, studio, theatre · base type: gx16d · lighting color: warm white · shape: round.

Fresnel spot. Fresnel Halogen Spot Light(1000 W) - Color: Black

Dimmer 12 CH 30 KW DMX 512 Dimmer Pack Power 3 Phase or 220 Volt 50Hz Each Chanel 20 Amp MCB. Load By 16 Amp. 5 Pin Socket. DMX Data, Error DMX on Indicators Chesses

DMX Controller Specifications DMX512/1990 Standard 4 dmx Universe, 20+ slider for manual control of channels DMX in/out: 3 pin male/female XRL. Power input: Powercon/iec.

200W BLINDER LED SOURCE : 100W X 02 COLOUR TEMPERATURE: 3200K BEAM ANGLE : 60 DEGREES LENS: FIXED OPTICS: PLAIN; POWER INPUT : 230V/50HZ, SIGNAL INPUT : 3POLE XLR. HOUSING :DIE CAST ALUMINIUM

DMX AMPLIFIER Specifications 1 in 4 out Dmx signal booster, Signal in & through: 3 pin male/female XRL. Power input: AC 90-230V

Mountng Clamps: Heavy dyty metal C- clamp for lighting trusses, 30-45mm clamping range, load capacity- 25Kg

Safety Bond: Black coated 3mm steel wire rope safety bond of 550mm length (loop to loop) and 15kg capacity with 6mm black carbine hook

DMX512 Signal Cable with connectors 120 ohm impedance, low capacitance, and double (foil and braid) shield

Power & Signal Gang Box with LEC socket mount connector - 16 Amps

5/3 pole Signal Mount Socket Mount Connector

Cable Mount Elcom Male & Femle

MS WINCH STAND HEAVY WITH DOUBLE "T" (18 FEET)

Haze machine 1500W Haze machine, Warm up time 30seconds, wire, remote, smoke output 20000cuft/min at 5mtr, 3.5L tank capacity. Output : 20000cu.ft/min.

2.5SQ.MM 16 CORE Shielded (Braided) Flexible Cables 1100 Volts

2.5SQ.MM 2 CORE Shielded (Braided) Flexible Cables 1100 Volts

2.5SQ.MM 2 CORE Shielded (Braided) Flexible Cables 1100 Volts