REPAIRS TO INTERNAL WATER SUPPLY, SANITARY / PLUMBING FITTINGS, CHAJJA, WALL, STAIRCASE, PLINTH PROTECTION / HARD STANDING, INCLUDING CERTAIN CONNECTED MISC WORKS AT AFS BIDAR

Amount

Taking up or down steel tubing and connections 15mm bore

Fixing only GI tubes medium grade including supply and fix necessary fittings and fixed complete to walls and ceiling or laid in floors, 15mm dia bore all as specified and directed. Note: GI Pipe will be issued under Schedule 'B' free for fixing / laying.

Taking up or down steel tubing and connections 20mm bore

Fixing only GI tubes medium grade including supply and fix necessary fittings and fixed complete to walls and ceiling or laid in floors, 20mm dia bore all as specified and directed. Note: GI Pipe will be issued under Schedule 'B' free for fixing / laying.

S&F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe.

S&F in repair Vitreous china squatting Pan 'Orrisa' Pattern size 580 x 440 mm white with integral foot rest , P or S Trap, and lime concrete bedding complete making good disturbed surfaces.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete.

S&F in repairs Stainless steel sink made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, connecting union overall size 495mmx420mm with bowl size 410mmx330mmx160mm including 32mm bore PTMT Waste coupling, fixing in cement mortar on to dwarf wall or fixing cantilever brackets complete.

S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, a pair of angle iron brackets duly painted/ erecting stand including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3, complete all as specified and as directed

S&F in repairs Wash basin oval shape counter top (overall size not less than 550 X 400 mm) , coloured including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including including 32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as directed by Engineer in charge.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all as directed by Engineer in charge.

S&F in repairs 15mm bore PTMT bib tap standard any colour screwed, for iron pipe and fixed (Minimum weight 90 gms)

S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, glossy finish complete all as specified and directed.

S&F in repairs Health Faucet with 1.5 m tube & hook of brass, glossy finish all as specified and directed by Engineer in Charge.

S&F in repairs 15mm bore stop valves, cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as directed.

S&F in repairs 15mm bore stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screw down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as directed .

S&F in repairs 15mm dia angle stop cock of chromium plated / brass, glossy finish complete all as specified and directed

S&F in repairs 15mm bore pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe all as directed by Engineer in charge.

S&F in repairs 15mm dia Pillar tap swan neck of brass, glossy finish complete all as specified and directed.

S&F in repairs 15mm bore PTMT Pillar tap standard any colour screwed, for iron pipe and fixed (Minimum weight 110 gms)

S&F in repairs PVC connection 450mm long of 15mm bore with pair of brass check nuts, all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore all as directed by Engineer in charge.

S&F in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed

S&F in repairs Toilet paper Holder of chromium plated Glossy finish.

S&F in repair Plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as directed by Engineer in charge.

S&F in repairs waste coupling of PTMT (half or full threaded), Bore dia of discharge pipe 32mm. (Minimum weight -45gms)

S&F in repairs waste coupling of PTMT for urinals (half or full threaded), Bore dia of discharge pipe 32mm. (Minimum weight -45gms)

S&F in repairs PVC waste pipe 32mm bore for WHB/Sink/Urinal

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as directed by Engineer in charge.

S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) all as directed by Engineer in charge.

S&F Rotational moulded polyethene water storage tanks 2000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm Ball Valves, 20mm Tank nipple and dismantling of existing water tank complete all as directed by Engr-in- Charge.

S&F Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm Ball Valves, 20mm Tank nipple and dismantling of existing water tank complete all as directed by Engr-in- Charge.

S&F Rotational moulded polyethene water storage tanks 750 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm Ball Valves, 20mm Tank nipple and dismantling of existing water tank complete all as directed by Engr-in- Charge.

S&F Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 20mm Ball Valves, 20mm Tank nipple and dismantling of existing water tank complete all as directed by Engr-in- Charge.

Cleaning and removal of scale and dirt etc from tanks of capacity exc 250 & n.exc 500 ltr and from mouths of circulating pipes etc.

Cleaning and removal of scale and dirt etc from tanks of capacity exc 500 & n.exc 1000 ltr and from mouths of circulating pipes etc.

Cleaning and removal of scale and dirt etc from tanks of capacity exc 1000 & n.exc 2000 ltr and from mouths of circulating pipes etc.

S&F in repairs PVC OH tank covers

M&L in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in repair.

Taking down PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, Tee etc., complete.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete.

S&F PVC (SWR) bends 110mm dia any radius with access door

S&F PVC (SWR) bends 75 mm dia any radius with access door

S&F PVC (SWR) junction single, (Single T) 110mm dia equal or unequal with access door

S&F PVC (SWR) junction single, (Single T) 75mm dia equal or unequal with access door

S&F PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequal with access door

S&F PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequal with access door

S&F PVC (SWR) branch piece, (Double Y) 75mm dia equal or unequal with access door

S&F PVC (SWR) vent cowl 110mm bore

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete removal of debris outside all as directed by Engineer in charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in floor etc. including tiles complete removal of debris outside MD land.

Plain cement concrete 1:2:4, type B0 (12.50mm graded stone aggregate) for 25mm thick as in sub base for floor tiles

Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer in charge.

Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing complete all as specified and as directed by Engineer in charge.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 all as directed by Engineer in charge.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 all as directed by Engineer in charge.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick with white cement and pigment, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer in charge.

Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick rendering in CM 1:4.etc,all as directed by Engineer in charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar.

Granite (of any type) 18-20 mm thick, work table, rubbed and polished in steps, jambs, piller, window cills, cooking platforms and like including pointing in white cement (1:2),with admixtures of pigment to match with shade of granite all as directed by Engineer in charge.

Demolition of Brickwork or stone/ boulder masonry/ block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed by Engineer in charge.

Pre-cast cement concrete block masonry type C1 (1:3:6) (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engineer-In- Charge.

Providing precast cement concrete solid building blocks or slabs, type C1 (1:3:6) (using 20mm graded stone aggregate), 10cm thick (with plain or interlocking joints as directed) setting in CM (1:6), complete, in walls, etc all as specified and as directed.

Rendering 15 mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement in external surfaces all as directed by Engineer in charge.

Preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M/s S.L.Chablani

Siddique constructions

HRML CONSTRUCTIONS