Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
22 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
PROJECT MANAGER U-02 CNDS U.P. JAL NIGAM DEHRADUN
7 SARASWATI ENCLAVE BADRIPUR ROAD, JOGIWALA, DEHRADUN
AS PER NIT AND BID DOCUMENT
2023_UPCDS_784255_1
289/KARYA-79/07 DT. 13.03.2023
Open Tender
Miscellaneous Services
Item Rate
90 days
AS PER NIT AND BID DOCUMENT
AS PER NIT AND BID DOCUMENT
3 documents required · 3 mandatory
₹5,900
AS PER NIT
₹50,000
23 Mar 2023
14 Mar 2023
22 Mar 2023
14 Mar 2023
22 Mar 2023
14 Mar 2023
Amount
LABOUR RATES
Labour work for ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vaneering with vertical grains or cross bands and face vaneers on both faces of shutters 30mm thick including ISI marked stainless steel butt hinges with necessary screws
Labour work for fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading
Labour work for glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
Labour work for Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. At Apron 40 mm thick with 20 mm nominal size stone aggregate
Labour work for Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. At Rooms & Other Covered Area 40 mm thick with 20 mm nominal size stone aggregate
Labour work for Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick
Labour work for glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
Labour work for Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Labour work for Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Labour work for gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase
Labour work for water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours.b)Second layer of slurry of cement @ 0.242 kg/Sqm mixed with water proofing cement compound at 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Labour work for Cinder Filling in sunken portion
Labour work for water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
Labour work for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
Labour work for Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)
Labour for wall Putty
Labour work for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Primer on steel section
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work with base material
Labour work for With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
Labour work for With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) Two or more coats on new work
Labour for Wiring for light point/fan point/ exhaust fan/call bell point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable in Surface/ recessed medium class PVC conduit, , with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required. Group A
Labour for Wiring for twin control light point with 1.5 sqmm. FRLS PVC insulated copper cunductor single core cable in Surface/ recessed medium class PVCconduit, 2 way piano type switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc. as required.
Labour for Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X1.5 sqmm + 1x1.5 sqmm earth wire
Labour for Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X4 sqmm + 1x 4 sqmm earth wire
Labour for Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X6 sqmm + 1x 6 sqmm earth wire
Labour for fixing metal box of Different sizes (nominal size)on surface or recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
Labour for fixing following Piano switch / socket on existing switch box / cover including connections etc. as required. 5/6 amps switch
Labour for fixing following Piano switch / socket on existing switch box / cover including connections etc. as required. 15/16 amp switch
Labour for fixing following Piano switch / socket on existing switch box / cover including connections etc. as required. 3 pin 5/6 amp socket outlet
Labour for fixing following Piano switch / socket on existing switch box / cover including connections etc. as required. 6 pin 15/16 amp socket outlet
Labour for fixing following Piano switch / socket on existing switch box / cover including connections etc. as required. Bell Push
Labour for fixing call bell / buzzer suitable for single phase, 230 volts, complete as required.
Labour for fixing of two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Labour for fixing brass batten/ angle holder including connection etc. as required.
Labour for fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
Labour for fixing following way,single pole and neutral, sheet steel, MCB distribution board, 240 volts on surface /recess complete with tinned copper bus bar, neutral link, earth bar, din bar interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 6 way, Double door
Labour for fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
Labour for fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
Labour for fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A
Labour for Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories andLabour work for masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7m long etc, with coke and salt ) as required.
Installation of meter Panel .
Labour for fixing of 15 watt CFL bulb complete in all respects as required.
Labour for fixing of LED Tubelight complete in all respects as required.
Labour work for White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
Labour work for P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia
Labour work for Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm
Labour work for unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
Labour work for C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore
Labour work for C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15 mm nominal bore
Labour work for C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
Labour work for unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
Labour work for on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm
Labour work for Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Concealed work 20mm dia nominal outer dia pipes
Labour work for Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Concealed work 25mm dia nominal outer dia pipes
Labour work for Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Concealed work 32mm dia nominal outer dia pipes
Labour work for Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Exposed on wall 20mm dia nominal outer dia pipes
Labour work for Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Exposed on wall 25mm dia nominal outer dia pipes
Labour work for Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. Exposed on wall 32mm dia nominal outer dia pipes
Labour work for gun metal gate valve with wheel of approved quality. 25mm dia nominal bore
Labour work for gun metal gate valve with wheel of approved quality. 32mm dia nominal bore
Labour work for placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. Capcity in Per Liters
Labour work for brass stop cock of approved quality. a) 20 mm nominal bore
Labour work for brass stop cock of approved quality. b) 25 mm nominal bore
Labour work for on wall face unplasticised Rigid PVC soil and waste water pipes conforming to IS : 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm dia P.V.C. pipe
Labour work for on wall face unplasticised Rigid PVC soil and waste water pipes conforming to IS : 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. b) 90mm dia P.V.C. pipe
Labour work for UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) P-Trap type Floor Trap 110 x 110 mm
Labour work for ISI marked (IS:2878) Portable fire Extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with CO2 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
Labour work for 'ABC' stored pressure type Dry Chemical Powder (Mono-Ammonium Phosphate) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:14609.
Labour work for M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
Labour work for Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
Labour work for Labour work for, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs conforming to IS: 12818, including hire & labour charges fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 50 mm nominal size dia
Labour work for , filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Labour work for , filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
Labour work for , filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
Labour work for Gravel packing in tubewell construction in accordance with IS: 4097, includingLabour work for gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
Labour work for Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
Labour work for Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 250 mm. dia. RCC Pipes
Labour work for 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarsesand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Labour work for fixing of parking tile of size 300x300 mm
Labour work for parking tile of size 400x400 mm
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m1.50 m to 3.00 m depth
Labour Charges for Installation of 300 KLD Electro mechinacal work of STP.
Labour work for Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
Labour work for Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.250 mm. dia. RCC Pipes
Labour work for Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.300 mm. dia. RCC Pipes
Labour work for Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.450 mm. dia. RCC Pipes
Labour work for double flanged (Screwed/Welded) centrifugally (Spun) Ductile iron pipes of class K-9 conforming to IS 8329 200 mm dia Ductile iron double flanged
Labour work for double flanged (Screwed/Welded) centrifugally (Spun) Ductile iron pipes of class K-9 conforming to IS 8329 250 mm dia Ductile iron double flanged
Labour work for push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 200mm dia pipes
Labour work for push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 250mm dia pipes
Labour work for C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 200 mm diameter
Labour work for C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 150mm diameter
Labour work for C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately): 125 mm diameter
Labour work for and fixing C.I. Sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):100mm diameter
Labour work for C.I. Double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately. a) 50mm dia
Labour work for & fixing HDPE PN-6 Class pipes complete with HDPE. fittings including tranching and refilling etc. (external work)110 mm nominal bore.
Labour work for & fixing HDPE PN-6 Class pipes complete with HDPE. fittings including tranching and refilling etc. (external work)140 mm nominal bore.
Labour work for HDPE PN-6 Class pipes complete with HDPE. fittings including tranching and refilling etc. (external work) 160 mm nominal bore.
Labour work for gate valve (with cap complete with bolts, nuts, rubber insertion etc. 32 mm nominal bore.
Labour work for gate valve (with cap complete with bolts, nuts, rubber insertion etc. 25 mm nominal bore.
Labour work for erection, testing and commisioning of 2 pole structure for terminating 11 KV O.H supply from electricity supply authority as per specification and drawing of UPCL Drawing.
Labour work for Installation, testing and commissioning of 400 KVA 11/0.433 KV, 3 Phase, 50 Hz, Dyn 11, indoor VCC type Transformer, complete with following standard, mountings fillings accessories, etc. as required.a) Name of Manufacturer -- AS er approved brand of UPCL
Labour work for assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 630 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 630 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTCOMING 400 Amp FP MCCB (36kA) - 2 Nos.
Labour work for assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 400 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 400 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTGOMING 100 Amp FP MCCB (36kA) - 7 Nos.
Labour work for assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 400 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 400 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTCOMING 100 Amp FP MCCB (36kA) - 4 Nos.
Labour work for assembling erecting connecting, testing and commissioning of sheet metal enclosed outdoor type feeder panel with water proof dust and vermin proof hinged and lockable doors including rain protection cover complete with interconnections, with aluminium wire, tapes, bonding to earth and painting complete as required. The feeder pillar shall consist of MCCB as incoming and MCCB/MCB as outgoing. (Note : This panel shall be a FRONT operated, with cable entry from the top/bottom. The fault with standing capacity shall be 25 KA. ). INCOMING1No. Of 200 Amps TPN MCCB of 36KA service breaking capacity.BUS BAR 1 Set of 200 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 25 KA at 415 volts.3Nos. Phase indicating lamp each lamp shall have one toggle switch .OUTCOMING 100 Amp FP MCCB (36kA) - 4 Nos.1x40 amp FP MCB
Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 120 sq. mm and upto 400 sq. mm
Labour work for and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 240 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
Labour work for making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 240 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
Labour work for laying of 3 core standered aluminium conduktor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098(Part-II with latest amendments) 11 KV grade at a depht of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks in sides and on the top put across. The armouring of cable shall be properly connected with earth condutor by clamps etc. 3 x 70 sq.mm.
Labour work for Earthing with GI earth pipe 4.5 metre long, 40 mm dia including accessories, andLabour work for mansonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Labour work for Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories andLabour work for masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7m long etc, with coke and salt ) as required.
Labour work for Earthing with copper earth plate 600mm x 600 mm x 3mm thick including accessories andLabour work for masonary enclosure with cover plate having locking arrangement and watering pipe 2.7m long etc, with coke and salt ) as required.
Labour work for Laying of 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Labour work for of 25mm x 5mm G.I strip in 40mm dia G.I Pipe from earth electrode as required.including connection with G.I. nut bolt, spring washer excavation and re-filling etc. as required.
Labour work for earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required.
Labour work for Laying of 40mm X 5 mm G.I strip from earth electrode directly in the ground as required complete in all respects including testing joint of G.I strip 40mm x 5 mm and 150mm long with G.I bolts and nuts etc. complete in all respects
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq.mm and upto 95 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq.mm and upto 185 sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 185 sq.mm and upto 400 sq.mm
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sqmm. (28mm)
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 25 sqmm. (28mm)
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sqmm. (32mm)
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 50 sqmm. (35mm)
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 150 sqmm. (50mm)
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 185 sqmm. (57mm)
Labour work for making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 300 sqmm. (70mm)
Labour work for aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 240 sqmm 3.5 core
Labour work for aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 150 sqmm 3.5 core
Labour work for aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 70 sqmm 3.5 core
Labour work for aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 35 sqmm 3.5 core
Labour work for aluminium conductor, PVC insulated armoured, served, sheated cables 1100 volts grade . 10 sqmm 4 core
Labour work for 7 Mtr High hot dip Galvanized Octagonal Pole ( Valmont Make ) with bottom 130mm A/F, top 70 mm A/F made up of 3 mm thick HT plate and 220x220x14 mm base plate and 1000 mm long single arm bracket complete with 4 Nos M20 x 700 mmlong " J type " foundation bolts.
Labour work for, installation, testing and commissioning of HPF street light Fluorescent Tube Light fitting suitable for 1x 40 watt Fluorescent Tube complete in all respect. complete in all respect. . [ make-CG,OR equivalent ] Eq to philips / wipro
Labour work for fixing of Bakelite sheet 3 mm thick of suitable size & connector
Labour work for Erection of metallic pole of following length cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggeregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8.0 metre
Labour work for and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole
Labour work for MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
Labour work for fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
Labour work for and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
Labour work for & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
Labour work for of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with Labour work for all material labour T & P for proper completion of work.
Labour work for fixing of fire extinguishers, ABC Type 4.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with Labour work for all materials and labour for proper completion of work.
Labour work for of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with Labour work for all materials and labour for proper completion of work.
Labour work for DWC Pipe for Ducting of cables 63/50 mm
Labour work for DWC Pipe for Ducting of cables 90/75 mm
Labour work for DWC Pipe for Ducting of cables 120/103 mm
Labour work for DWC Pipe for Ducting of cables 160/136 mm
Labour work for DWC Pipe for Ducting of cables 200/175 mm
Labour work for DWC Pipe SN 8 for drainage/Rain water Harwasting 150 mm
Labour work for DWC Pipe SN 8 for /Drainage/Rain water Harwasting 100 mm
Labour Work for fixing with Chamber cover of precast RCC with frame Size 300x300 mm
Labour Work for fixing with Chamber cover of precast RCC with frame Size 450x450 mm
Labour Work for fixing with Chamber cover of precast RCC with frame Size 600x600 mm
Labour Work for fixing with Chamber cover of precast RCC with frame Size 600 mm dia
Labour Work for fixing with Chamber cover of precast RCC with frame Size 900 mm Dia
Labour Work for fixing with Chamber cover of precast RCC with frame Size 450 mm Dia
Labour Work for fixing with Chamber cover of precast RCC without frame Size 300x600 mm
Labour Work for fixing with Chamber cover of precast RCC with frame Size 600x900 mm
MOHD SHAKIR
Kumar Trading Compony
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .