Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.1 LAccepted-Finance 2 1433 D 6 KAMAL COLONY SAHARANPUR UP PIN 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-Finance ok | |
| 2 | L2₹58.9 L+₹5.8 L (10.9%)Accepted-Finance 79B MIG PHASE 1 INDIRA PURAM G M S ROAD DEHRADUN UK PIN 248171 | DEHRADUN | UTTARAKHAND | 248171 | L2 | Accepted-Finance ok | |
| 3 | L3₹59.3 L+₹6.2 L (11.7%)Accepted-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Accepted-Finance ok | |
| 4 | L4₹63.7 L+₹10.6 L (20.0%)Accepted-Finance H NO 670 SECTOR 10 PANCHKULA HRY 134115 | PANCHKULA | HARYANA | 134115 | L4 | Accepted-Finance ok |
Tender Value
₹72.7 L
EMD Value
₹1.3 L
Closing Date
23 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Dehradun
HQ CWE Dehradun
PROVN OF SINGLE LIVING ACCN AT RIMC AND SPL REPAIR TO BLDG NO P-2/A, P-2/B, P-33 AND T-1/2 MCO MD ACCN REST CAMP UNDER AGE B/R-II OF GE DEHRADUN
2024_MES_642898_1
9874/DDN/E8
Open Tender
Civil Works
Item Rate
180 days
Dehradun
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
GE Dehradun
₹1.3 L
Yes
8 Apr 2024
17 Feb 2024
25 Mar 2024
17 Feb 2024
23 Mar 2024
9 Mar 2024
Amount
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed by Engineer-In- Charge.
M & L for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and directed by Engineer-in-Charge
M & L for treating the back fill in contact with foundation at the rate of 7.50 ltr of emulsion per sqm of vertical surface complete all as specified and directed by Engineer-in-Charge
M & L for treating the top surface of filled earth at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed by Engineer-in-Charge
M & L for treating the soil under plinth protection at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed by Engineer-in-Charge
M & L for treating the soil along with external perimeter of building at the rate of 2.25 ltr of emultion per meter of the perimeter wall complete all as specified and directed by Engineer-in-Charge
Returning, filling in, including spreading, levelling, watering and well ramming in l;ayers not exc 25 cm in soft and loose soil complete all as specified and directed by Engineer-in-Charge.
Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed by Engineer-in-Charge.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engineer-in-Charge.
M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for foundations, includingf rafts, footings, foundations beams, plinth beams, bases for columns etc complete all as specified and directed by Engineer-in-Charge.
M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab, chajjas etc and in shelves and this like complete all as specified and directed by Engineer-in-Charge.
M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for columns, pillars, piers, post and strut complete all as specified and directed by Engineer-in-Charge.
M & L cement concrete M-25 desigh mix (using 20mm graded aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.
M & L for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed by Engineer-in-Charge.
M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc.for fair finished complete all as specified and directed by Engineer-in-Charge.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc.for fair finished surface complete all as specified and directed by Engineer-in-Charge.
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, hozontal or sloping and similar work exc 5cm but n exc 10cm etc.for fair finished surface complete all as specified and directed by Engineer-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surface complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, incl cranking, be inding spirally for hooping for columns,footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge
- ditto- as ser item no 33 above but 5mm dia and over upto and inclluding 10mm dia in stirrups, spacers and binders etc complete all as specified and directed by Engineer-in-Charge
M & L excavated earth for spreading and levelling in layers n exc.25 cm thick and well ramming including watering as required complete all as specified and directed by Engineer-in-Charge. (Note: Soil to be used, from Excavated fdn)
M & L for hardcore of broken bricks of gauge n exc. 63 mm , deposited , spread and levelled and compacted in layers n exc. 15 cm thick , watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge
M & L for 50 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.
M & L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 10mm thick on other than fair face of brick work surfaces in CM 1:4, complete all as specified and directed.
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.
M&L for non-skid glazed coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incluidng 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for kota stone slab 20-22 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto and incluidng 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Dismentling floor hearth or wall tiling including cement motor bedding (But not backing), removing serviceable tiles to stone and rubbish off the premises
M & L virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6-7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L Glazed ceramic tiles coloured 300mmx 450mm , 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and ditected.
Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.
M&L for brick work with fly Ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. Note:- Water Proofing compound shall be measured and paid seprately.
M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed
S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed
S&F for 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/gauge shall be measured and paid for separately.
S & F 9 mm thick (with min 5 nos of ply ) plywood grade BWR type BB, fixed with screws to timber frame work/ doors complete all as specified and directed by Engineer-in-Charge.
Taking down chowkat with shutter n. exc 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge.
Taking down chowkat with shutter of any description (without taking off shutter from frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed by Engr-in-Charge.
S & F flush shutters moulded 30 mm thick both face is covered with decorative face veneer teak wood/sunmica finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, complete all as specified and as directed.
S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.
S & F in repair PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed
Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 50 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.
Providing and Fixing factory made single extruded WPC (wood polymer Composite ) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymar of k value 58-60 (Suspension grade),Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk0 and non toxic additivves ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face ) & 900 N ( Edge) Minimum compressive strength 50 N /mm2 Modulus of elasticity 850 N /mm2 and resistance to spread of flame3 of class A category with property of being termite/borer proof water/ moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both hinges of required size with necessary full body threaded star headed counter sunk S.S Screws all as per direction of engineeer-in-Charge. Note : stainless steel butt hinges and necessary S.S Screws shall be paid separately) complete all as specified and directed.
S & F factory made steel windows (Box Type) with side hung shutters precoated (colour coated/powder) with double shutter (glazed and gauged shutter both) with frame complete all as specified and directed and shown on Drg TD 158 Sheet ½ & sheet 2/2. Note :- Measurements shall be taken and paid compositely for frame, glazed and gauged Grill shall be measured and paid separately under respective item. No extra claim shall be entertained on this ground.
S&F forfactory made box type powder coated steel ventilator fixed type with glazing bars complete welded including a shop coat of red oxide zinc chrome primer complete all as specified and as directed.(Drg no 158 sheet 1/2 & 2/2) Note: Glass shall be measured and paid seperately.
S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.
S&F sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed
S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed
S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed
S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed
S&F double legged floor door stopper 150 mm long aluminium alloy with rubber etc complete all as specified and as directed
S & F 125 mm size SS butt hinges medium weight fixed with SS screws complete all as specified
S&F mild steel helical door spring 300 mm longe ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed
S&F stainless steel Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.etc complete all as specified and as directed
S&F 500 litre ISI marked rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed
S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed
M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed..
S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed
S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed
Dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity and removing from site complete all as specified and directed.
S&F in repair rotational moulded polyethylene1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and ditected.
S&F vitreous chinaware coloured wash hand basin complete, CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
S & F Brass CP wall mixer 15 mm bore (wall mounted type) for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & F ancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.
S&F bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed
S&F stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed
dittoo all as per sr item no 65 above but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed
S & F Brass CP WHB mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed
S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed
S&F PVC connection of 45 cm length including brass nuts complete all as specified and as directed
S&F vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed
S&F PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.
S&F ifor 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed
S&F for 75 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed
S&F for 100 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed
S&F 75mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) with lead joints complete all as specified and as directed
S&F 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) with lead joints complete all as specified and as directed
S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge
Dismantling of framed or unframed timber scantlings 40 Sq cm and over in section, in any postion complete all as specified and directed..
S & F roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel ,hollow sections or flat sections) including distance pieces, cleats etc Fe-290(Gde E 16 complete all as specified and directed .
S&F 5 to 8 mm thick plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmenother connections complete all as specified and directed
M & L for injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etccomplete all as specified and directed.
Dismantling asbestos cement (corugated or semicorrugated etc) & steel sheets, in roof covering including ridge complete all as specified and directed..
S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge
S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge
M & L for size of grid 605x605 mm providing & fixing false ceiling of Anodised aluminium snap grid frame work for false ceiling all as specified Non Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or slopingcomplete at all heights as per direction of Engineer-in-Charge.
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed
M&L preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed
M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed
M&L for applying two coat of oil bond distemper white or any tint over a coat of primer etc over prepared surface of putty complete as specified and directed
M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed
Supply only liquid water proofing compound complete all as specified and directed.
M&L for preparation of new wall surface and applying water proof wall putty 2 mm thick (Asian /Berger/JK) to make the surface smooth as specified and directed by Engr-in-Charge.
M&LFinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)I and directed by Engr-in-Charge
M&L for complete removal of existing treatment of walls incl corners and applying two coats of distemper oil emulsion over one coat of primer wall surface even & smooth by roller complete all as specified and directed.
M&L for preparation of old painted surfaces of wood of any description over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed
S&F Vitreous China wash down water closet (EWC) including PVC seat cover white with CP hinging device complete all as specified and as directed by Engr-in-charge
S&F in repairs Vitreous China wash hand basin, white, of size 550mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, pillar tap including fixing of tap, waste fitting etc complete.
S & F in repairs health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.
Material & Labour factory made prepolished rubber moulded vibromatic Chequred cement concrete tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified.
M/L PCC 1:3:6 type C-2 ( using 40mm thick graded stone aggragate) as in surface channel drain. Complete all as specified and directed
S&F in repair PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.
S&F in repair PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.
S&F in repair PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.
S&F in repair PV C (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.
M&L in repair PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.
Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder, light fitting any type and fan regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.
M&L point wiring with 1. 5 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC surface conduit wiring and incl making good with factory made modular pressed terminal box (recessed) with 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch.
All as per item No.126 above but for one one bell point controlled by one Bell Push
All as per item No.126 above but for one pin 5 A socket outlet on same board
All as per item No.126 above but for one pin 5 A socket outlet independent point
All as per item No.126 above but with 4 Sqmm cable for one 6 pin 15A socket outlet point on independent board
S&F switch piano flush, button type 5 Amp SP 250V AC complete.
S&F switch piano flush button type 15 Amps SP 250V AC complete.
S&F bell push Amps SP 250V AC complete.
S&F socket outlet 2-in-1, 5 Pin 5 Amps 250V AC complete.
S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete
S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete .
S&F Door Bell, Ding Dong AC. 230 volts, single pole SP 250V AC complete.
Taking down carefully existing LED tube light fitting and keeping aside for refixing after cleaning and providing suitable size flexible copper wire from ceiling rose to light fitting complete all as directed
S&F LED tube light High-quality materials and design. Extruded aluminium housing enhances safety. High quality PC Diffuser. Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design, easy to install Efficacy: 125 lm/W. complete all as specified and directed. Make Crompton Model BRIGHT LINEA Cat Part No - CCS-100-20-65-HL2-DP-NWH or equivalent Note : Light fitting should be not less than 125 lm/W & of Alluminiun body.
Taking down carefully existing LED Mirror light fitting and keeping aside for refixing after cleaning and providing suitable size flexible copper wire from ceiling rose to light fitting complete all as directed
Supply and fixing LED Mirror light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supply & fix Wall light fitting along with 9 Watt Bulb .
Taking down carefully existing LED security light fitting and keeping aside for refixing after cleaning and providing suitable size flexible copper wire from ceiling rose to light fitting complete all as directed
S&F LED Security light Industrial 35 W Powered by built-in, isolated electronic LED driver Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection , Tempered protective custom moulded polycarbonate diffuser, thermal, shock and impact-resistant, fixed to the housing by SS screws, Epoxy powder coated metallic silver finish after phosphochromate treatment. all as specified and directed
Dismantling existing ceiling fans complete for necessory servicing, rewinding, painting and hanging of fan complete.
Dismantling existing exhaust fans complete and refixing the same as per existing after necessory servicing, re-winding ,painting, numbering complete.
S&F fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed.
S&F Exhaust fans AC , metallic, single phase 230/ 240 V of size 300 mm sweep,50 Hz with louver of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block including taking down old metalic exhaust fan complete all as specified and directed.
All as per item No 148 but Exhaust fans made of sturdy Engineering plastic of sweep 250mm
Taking down carefully existing storage water heater and keeping aside for refixing after repairing, cleaning and providing suitable size flexible PVC connections all all connecting electrical and water supply accessories complete all as directed
S&F Supply and fix Water heater storage type, electric, capacity 25 litres AC single phase 230/ 240 V o and connecting up including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.
S&F Sheet metal enclosures with socket plug top and MCB' SPN enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB
S&F TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement including and fixing of DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge,
S & F sheet metal enclosure TPN for DB's when MCB's to be used 8 way with 200 amps bus bar and double door complete all as specified and directed.
S&F MCB TPN 240 Volt 10 KA 63 Amp conforming to IS complete all as specified & directed.
S&F MCB SP 6 to 32A
M&L for submain wiring with 3 runs(N+P+E) of 1.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 1.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.
All as per item No 157 but with 3 runs(N+P+E) of 2.5 Sqmm single core copper FRLS conductor . Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.
All as per item No 157 but with 3 runs(N+P+E) of 4 Sqmm single core copper FRLS conductor .Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.
All as per item No 157 but with 6 runs(3 runs P+N+ 2 run Earth) of 6 Sqmm single core copper FRLS conductor and PVC conduit not less than 32 mm dia. Note:-6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.
M&L for earthing complete with GI or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI earth strip 4 Sqmm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.
Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 35 sqmm 3½ core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed
Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.
Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.
Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.
Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.
S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.
S&F switch modular 6 Amps 230 Volts one way switch.
S&F switch modular 10 Amps 230 Volts 2 way switch.
S&F Socket 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified
S&F Socket 6A/16 Amps-2/3 pin AC 230 Volts modular type complete all as specified and as directed.
S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified and as directed.
S & F Modular white cover plate with frame 2 module and metal flush box 2 module complete all as specified and as directed.
All as per item No.174 above but 3 module
All as per item No.174 above but 4 module
All as per item No.174 above but 6 module
All as per item No.174 above but 8 module
All as per item No.174 above but 12 module
S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete .
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F LED luminaire 600x600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor complete., complete all as specrified & directed
S&F Air Circulator fans (Wall Fan) 230 volts single phase oscillating 400 mm sweep suitable for wall mounting, complete with all accessories ,connected with connector block of fan including fixing of Fan hooks and necessary nuts and bolts complete all as specified and directed.
S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified & directed.
All as per item No 157 here in above, but 3 run of Cable 6 Sq mm. Note:-3 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.
Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 35 sqmm 4 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed
Cutting existing road/hardstand of any type by using crow bar chisel uprto a depthof 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed
ACE BUILDERS AND CONTRACTORS
M/s Anil Kumar
IMPERIAL ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .