REPAIRS TO FLOORING, WALL TILING, PLASTERING, PLUMBING AND SEEPAGE LEAKAGE WITH WPC PAINT AT PATTAN AND REPAIR MAINT OF INTERNAL WIRING AT VARIOUS LOCS AT BARAMULLA UNDER GE 969 EWS

Amount

Demoliton of cement concrete (un-reiforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded aggregate as in flooring, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4). Note - Water proofing compound @ 3% by weight of cement (screed bed) shall be used where required like bathroom, toilet, kitchen flooriing etc at above ground floor. WPC shall be measured and paid separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg/Sqm includig cleaning surfaces, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

M&L Sand filling under floors or in foundations, including watering and consolidation, complete all as specified and as directed.

M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) .complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 450x300x8-10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) .complete all as specified and directed. Note - Water proofing compound @ 3% by weight of cement (being used in rendering /backing coat for tiles in vertical portion) shall be used where required (at above ground floor). WPC shall be measured and paid separately.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

M&L Walling of random rubble masonry uncoursed built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster of any description s etc including racking out joints hacking for key, scrubbing down with water etc.

M&L for rendering 10 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of Preparing surfaces plastered New surfaces walls and applying two coat of OBD, complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering with emulsion on walls over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and as directed.

S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean sawn secured with nails exc 13 but n. exc 25 sqcm in section complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean sawn secured with nails exc 3 but n.exc 6 sqcm in section, complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness inlcuding cover fillets, complete all as specified and as directed.

S&F in repairs PVC Sigma Panel hollow interlocking wall panelling/ false ceiling of 8-10mm thick PVC sheet. The panel & strips shall be of 600 Kg/cbm densite manufactured by an ISO-9000 certified company. The strips should be PVC strip. The PVC strip shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. PVC false ceiling will be fixed using aluminium L/U shape edge aluminium profile/channel. Optionally a strips of 5mm PVC sheet of width 75mm feather at the edges shall be stuck at the places where two panels are jointed, using solvent cement complete all as specified and as directed.

M&L 6 mm thick Plywood on wall panelling, grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.

M&L 6 mm thick Plywood in ceiling, grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail complete all as specified and as directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove joint as in ceiling panelling, complete all as specified and as directed.

S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 8 to 10mm thick including fixed to timber frame work or using thermacol in flooring, complete all as specified and as directed.

M&L for french polishing on surfaces of any descreption, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling ,complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed.

S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling, complete all as specified and as directed.

S&F 0.80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm incl dismantling, complete all as specified and as directed.

M&L two coat of Synthetic enamel paint over a coat of red oxide including preparation of new steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

Taking down of Shutters of any description n exc 1 sqm each, complete all as specified and as directed.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm .complete all as specified and directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b) complete all as specified and as directed.

S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F Aluminium handles 100 mm , cast type, anodised, complete all as specified and as directed.

S&F Aluminium handles 150 mm , cast type, anodised complete all as specified and as directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

S&F aluminium alloy powder coated aluminium sliding windows three track with movable shutters (slinding on minium two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprane rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :- (a) Window Frame - 75mmx35mmx1.48mm thick (b) Top/Bottom rail and style/rail of shutter - 38mmx19mmx1.48mm thick and over (c) Aluminium beading /clips - 0.7mm thick (d) Stainless Steel wire cloth 0.45mm nominal dia of wire and average width of aperatuyre 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete. (e) Aluminium fittings such aluminium suitable handle with auto interlocking closing. (f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F in repairs venetian blind (zebra blind) coloured strip 75mm top 5mm thick powder coated aluminium rod ends at brackets are moulded type etc , complete all as specified and directed .

M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth, Complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S&F Softwood 2nd class Plan one side with butt joints eaves boards 20 mm thick, complete all as specified and as directed.

M&L softwood 2nd class Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed.

S&F 25 mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting, complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of wax coating all as specified, complete all as specified and as directed.

M&L two coats of synthetic enamel paint including preparation of surface on old wooden surface over 10 cm width or girth complete all as specified and as directed.

Taking down and replacement with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings ,complete all as specified and as directed.

Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and as directed.

Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors ,complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 ltrs to 500 Ltrs complete all as specified and as directed.

S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed , chromium plated, complete all as specified and as directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed.

S&F in repair stop valves fancy type chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore, complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover incl provision of concrete/ white cementing and P or S trap, complete all as specified and as directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 450mm fixed to GI tubbing, complete all as specified and as directed.

S&F Sheet glass thickness 4 mm,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass, complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass, complete all as specified and as directed.

S&F Sheet glass thickness 4 mm,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 cm long between flanges, complete all as specified and as directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed.

S&F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc complete all as specified and as directed.

S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkat, complete all as specified and as directed.

S&F in repairs Single piece WC with UF soft closet, seat cover, hinges, fixing acessories including flushing cistern size (370x690x795mm) including S trap 300mm, health faucet and jet spray complete all as specified and directed.

S&F in repairs CP health flucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and as directed.

S&F in repairs CP jet spray with flexible tube 1.5 mtr long complete all as specified, complete all as specified and as directed.

S&F in repair PP-R gate valves 32mm dia (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 110 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant rade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

M&L Creosote preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with, complete all as specified and as directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth with using extra cement in cement mortar 1:4 using Water Proofing Coumpoud @ 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for preparation of newly or previously untreated surfaces and finishing wall surfaces with Acrylic Smooth exterior paint of required shade with two or more coat applied @ 1.67 ltr/10 sqm and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint of required shade with two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfacs complete all as specified and directed.

M&L for Waterproofing and repair of leakage/seapage treatment to external wall :- (a) Step 1 - Taking down cement plaster of any description by manusal and mechanical means, plumbing treatement of pipes etc including racking out joints hacking for key, scrubbing down with water etc. and (b) Step 2 - applying waterproofing treatment to slab area wall surface sites with asisn paints smartcare Damp Block 2k @1.5kg/sqmt, Dampblock 2k is a two component elastomeric cementitious coating conforming to ASTM D 412 & ASTM D 4548.5 standards including all necessary surface preparation, etc. complete as per manufacturers specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1.0mm. The coating shall have a 100% elongation and crack bridging upto 1.2mm as per ASTM D4548.5. (c) Step 3 - Over and above Asian Paints Smartcare Dampblock 2k applying plaster minimum 12mm thick. SC REPAIR MORTAR. Makes ( BASF, Asian Paints, Sika, Fosroc)

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good distributed surfaces of walls, floors etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqmm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board.

(c)One 3 pin 5 Amp switch socket outlet on same board with accessories.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps,box type complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15 Amps box type,universal complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15 Amps flush type,universal complete all as specified and as directed.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified and as directed.

S&F in repairs Bell Push 5 Amp , Flush type complete all as specified and as directed.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with black plate suitable for batten fitting complete all as specified and as directed.

S&F LED Lamp 10W cool/warm, pin type/thread type all as specified and as directed.

S&F Decorative ultra slim square profile LED lighting fixture 1x20 watt with extruded polycarbonate, environmental friendly, energy efficient, all as directed.

S&F in replacement LED Mirror Light 10W, Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, suitable for surface mounting ona ceiling or wall complete all as specified and as directed.

S&F in repair LED 12W down light Decorative, surface mounting dome shaped pendant in green & black finishes complete all as specified and as directed.

S&F in repair LED 7.5 W down light Decorative, surface mounting dome shaped pendant in green & black finishes complete all as specified and as directed.

S&F in repair LED 10W surface Bed/track light complete all as specified and as directed.

S&F foot light 5W complete all as specified and as directed.

S&F 6 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel, Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed.

S&F 2 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed.

S&F 15 W LED panel round/square type, Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver including connecting cable of suitable size complete all as specified and as directed.

S&F 36/40 Watt Warm White LED ultra modern recess mounted luminaire (2'x2') environmental friendly, new generation aesthetically designed with high brightness complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150 mm complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200 mm complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F Distribution board, SPN 2 Way, single door complete all as specified and as directed.

S & F in repairs MCB, SPN 40 to 63 Amps rating 240 Volts 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S & F in repairs MCB, SPN 32 Amps rating 240 Volts 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S & F in repairs MCB, SP 6 to 32 Amps 240 Volts C curve, complete all as specified and as directed.

S&F in repairs MCB TPN 40 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

S&F in repairs MCB TPN 63 amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

M&L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM

M&L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

M&L sub main wiring with two run single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 10 sqmm and one run of 10 sqmm cable and one run of casing capping shall be measured as one RM

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 6 sqmm all as specified and directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed.

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 16 sqmm all as specified and directed.

S&F in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and as directed.

S&F heating element including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape (triangular/round) complete all as specified and as directed.

S&F heating element including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape (triangular/round) complete all as specified and as directed.

S&F thermostat including rubber / PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for existing geysers of capacity 25 / 35 / 50 ltrs including taking down existing unserviceable thermostat complete all as specified and as directed.

S&F PVC connecting pipe 18"/24" long with brass adopters for cold/hot water and connecting up with complete for 25 /35 /50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe complete all as specified and as directed.

S&F base assembly complete with inlet, out let, thermostat pipes, drain plug and screws for fixing the element suitable for any make and capacity Geysers complete with nuts, bolts and rubber gasket including taking down existing unservicable base assembly complete all as specified and as directed.

Supply only Copper Conductor 1.5 Sqmm multistranded FRLSH complete all as specified and as directed.

Supply only Copper Conductor 2.5 Sqmm multistranded FRLSH complete all as specified and as directed.

Supply only Copper Conductor 4 Sqmm multistranded FRLSH complete all as specified and as directed.

Supply only Copper Conductor 6 Sqmm multistranded FRLSH complete all as specified and as directed.

Supply only Casing Caping of size 25mm all as specified and as directed.

Note:- Schedule of credit Rs. 1,03,730.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

ALI MOHD NAJAR

ANUSHA ENTERPRISES

M/S GHULAM RASOOL LONE AND SONS

M/S MUKHTAR CONSTRUCTION CO

M/S GHULAM QADIR WANI AND SONS

M/S HAJI MOHD ASHRAF SUMJI

M/S SUSHEEL STEEL INDUSTRIES BARAMULLA