CIVIL REPAIRING AND MAINTENANCE WORK OF VARIOUS MUN. BUILDINGS, SCHOOL, ANGANWADI ETC. AT T.P.S. NO. 18, 25, 84 MOTAVARACHHA, BHARTHANA, KOSAD AREA, NEW ADDED VILLAGES & NON TP AREA IN NEW EAST (SARTHANA) ZONE, SURAT.

NAME OF WORK :- CIVIL REPAIRING AND MAINTENANCE WORK OF VARIOUS MUN. BUILDINGS, SCHOOL, ANGANWADI ETC. AT T.P.S. NO. 18, 25,

MOTAVARACHHA, BHARTHANA, KOSAD AREA, NEW ADDED VILLAGES & NON TP AREA IN NEW EAST (SARTHANA) ZONE, SURAT.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Part -A Civil Work.

Dismentling steel work including distempering and stacking the maerials with all lead and

Demolition including stacking of serviceable materials and disposal of unserviceable

2 materials with all lead & lift.

(i) RCC work 20.00 1110.75 C.M.

Demolition of brick work and stone masonary including stacking of serviceable materials

3 and disposal of unserviceable materials with all lead & lift.

(II) on Cement mortar. 20.00 577.92 C.M.

Removing the scraping of old deteriosted plaster of any thickness from wall/R.C.C.

4 member including stacking of serviceable material and disposal of unserviceable from site 125.00 20.55 S.M.

of work with all lead and lift.

Dismentalling tiled of stone floors laid in mortar including stacking of serviceable

materials and disposal of unserviceable materials with all lead & lift.

Kota stone flooring and steps 40.00 50.11 S.M.

Marble 40.00 50.11 S.M.

Tiles flooring / Dedo 50.00 50.11 S.M.

Granite flooring and steps 40.00 50.11 S.M.

Dismantling doors windows ventilators etc. (wood or steel) shutters including chowkhats,

6 Architraves, holdfasts and other attachment etc. comp. and stacking them within all lead & 16.00 197.09 No.

lift. (I) not exceeding 3 sq.m. in area.

Dismantling sanitary fittings like wash basin, w.c. pan Indian and Europeans type, flushing

tank etc. including stacking the materials with all lead & lift.

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and clamps

8 including stacking the materials with all lead and lift. (for any dia, of pipe) 50.00 78.51 R.M

Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys,Gutters etc. stacking of

9 serviceable materials and disposal of unserviceable materials with all lead and lift. (i) G.I. 40.00 50.11 S.M.

Removing of Collapsible Gate 2.00 101.00 No.

Removing of Rolling Shutter 2.00 101.00 EACH

Dismentling barbed wire in fencing including making rolls and also including dismentling

10 fencing posts including all earth work concrete in base and making good the disturbed 20.00 70.15 R.M

fround stacking useful materials as directed and disposing as directed and disposing of the

unserviceable materials with all lead and lift.

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the surplus

11 excavated soil as directed within a lead of 50 M. For following diameter of piles.

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of

the excavated stuff upto 50 mt. Lead & all lift, watering etc Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 30.00 123.13 C.M.

Executed With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 50.00 212.52 C.M.

Providing & Laying C.C 1:5:10 (1cement :5coarse sand :10 graded stone agg.40 m.m

13 Nominal size )& curing comp. excl. cost of from work in :Foundation & Plinth 2.00 2606.92 C.M.

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone agg. 40 mm

14 nominal size) & curing comp. incl.cost of form work in (A) Foundation and Plinth 5.00 2769.69 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal

15 size)&curing comp. excl. cost of form work in :(a) foundation & Plinth 5.00 3095.25 C.M.

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation,footing,Base of columns and Mass

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded stone agg.

17 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form work but excl. Cost

of reinforcement for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 2.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 11166.97 C.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 2.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending,

binding & placing in position etc. comp. Upto G.L./P.L.

Brick work using common burnt clay building bricks having crushing strength not less

19 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine 12.00 4441.11 C.M.

sand)(C) Fly Ash Bricks

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations

20 etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming 30.00 136.92 C.M.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level

22 consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 140.00 347.42 S.M.

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.080 sq.mt Ground Floor 3.00 12844.32 C.M.

First Floor 2.00 12885.28 C.M.

Second Floor 2.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt Ground Floor 3.00 11166.97 C.M.

First Floor 2.00 11207.92 C.M.

Second Floor 2.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.33 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground Floor 3.00 9201.68 C.M.

First Floor 2.00 9242.63 C.M.

Second Floor 1.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1) Having c/s area up to 0.080 sq.mt Ground Floor 3.00 9102.61 C.M.

First Floor 2.00 9143.56 C.M.

Second Floor 1.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt Ground Floor 3.00 8174.41 C.M.

First Floor 2.00 8215.36 C.M.

Second Floor 1.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. Ground Floor 3.00 7086.88 C.M.

First Floor 2.00 7127.84 C.M.

Second Floor 1.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'. Ground Floor 1.00 7984.42 C.M.

First Floor 0.00 8025.37 C.M.

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'. Ground Floor 3.00 7396.96 C.M.

First Floor 0.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

(4) Slabs having more than 13 cm. Thickness Ground Floor 3.00 6813.01 C.M.

First Floor 0.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

Ground Floor 3.00 9982.37 C.M.

First Floor 2.00 10023.32 C.M.

Second Floor 2.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

Ground Floor 2.00 5576.81 C.M.

First Floor 2.00 5617.76 C.M.

Second Floor 1.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded

24 stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc

Ground Floor 2.00 7698.11 C.M.

First Floor 2.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 1.00 11613.07 C.M.

First Floor 1.00 11654.03 C.M.

Second Floor 1.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm

nominal size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base of columns and Mass

Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded graded stone agg.

20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form work but excl.

Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 sq.mt 1.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 1.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 6578.07 C.M.

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m

27 Nominal size)& curing comp. incl. cost of from work in: wall caps/ copings. 3.00 4085.83 C.M.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl. bending,

binding & placing in position etc.comp.---Ground Floor

Ground Floor 225.00 77.29 Kg.

First Floor 150.00 78.34 Kg.

Second Floor 20.00 79.39 Kg.

Terrace (third) Floor 10.00 80.44 Kg.

Brick work using common burnt clay building bricks having crushing strength not less

29 than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 12.00 4729.83 C.M.

First Floor 7.00 5018.55 C.M.

Second Floor 2.00 5307.27 C.M.

Terrace (third) Floor 1.00 5595.99 C.M.

Half brick masonry in common brunt clay building bricks having crushing strength not less

30 than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and 15.00 551.00 S.M.

plinth (C)Fly Ash Bricks

Ground Floor 12.00 712.81 S.M.

First Floor 5.00 719.37 S.M.

Second Floor 3.00 725.94 S.M.

Terrace (third) Floor 2.00 732.50 S.M.

Uncoursed rubble masonary with hard stone of approved quality in foundations and

plinth in cement mortar 1:6 (1 Cement : 6 sand) including leveling up etc. complete.

Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand)

(A) Flush Pointing 12.00 101.89 S.M.

(B) Ruled Pointing 12.00 105.24 S.M.

Pointing on Uncoursed stone masonary with cement mortar 1:3 (1 cement : 3 Sand) ---

(A) Flush Pointing 12.00 110.24 S.M.

(B) Ruled Pointing 12.00 114.25 S.M.

Providing Rubble Pitching with hard stone of approved quality in cement mortar 1:6 (1

34 Cement : 6 Coarse sand) including leveling up ,Curing etc. complete excluding pointing 1.00 2550.00 C.M.

Providing and filling rubbles including hand packing and filling interstices with quarry

spalls behind abutments and between returns as directed.

Providing upto floor two level precast cementconcrete jali or grill 1:2:4 mix (1-Cement : 2-

coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia.

36 Mild steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3

and curing complete. (B) 40mm thick.

Ground Floor 5.00 741.93 S.M.

First Floor 1.00 752.39 S.M.

Second Floor 0.00 762.85 S.M.

Terrace (third) Floor 0.00 773.32 S.M.

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls

similar surfaces for plastering & finished even & smooth with a floating coat of cement

37 slurry mixed with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3

(1 cement : 3sand) (A) For wall and similar surfaces

Ground Floor 130.00 199.28 S.M.

First Floor 75.00 228.84 S.M.

Second Floor 20.00 258.39 S.M.

Terrace (third) Floor 5.00 287.94 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 80.00 225.34 S.M.

First Floor 45.00 254.89 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Second Floor 25.00 284.45 S.M.

Terrace (third) Floor 10.00 314.00 S.M.

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete

walls similar surfaces for plastering & finished even & smooth with a floating coat of

38 cement slurry mixed with admixture of lime or neeru in required proportion etc. 125.00 249.39 S.M.

comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more than 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all

floor levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm.

th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller

horizontal as well as vartical ( two times ) up to good quality and size of grain in elevation

as per directed by engineer incharge.

Providing 20 mm thick double coat mala cement plaster on brick / concrete work for

plastering comprising of base coat 12 mm thick cement plaster in cement mortar (1

41 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 30.00 286.10 S.M.

Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete.

Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at

junction of brick work and RCC work or two dissimilar surfaces, at all heights fixed by

nails, rowal plugs or tag by cement mortar 1:3 before applying the plaster, including

curing, scaffolding all complete as directed.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

45 sand) laid over and jointed with grey cement slurry mixed with pigment to match the 50.00 1019.39 S.M.

shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo

and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the shade of slab including rubbing

and polishing etc.complete.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani

,Bell make at all floor levels, in flooring, treads of steps & landings laid on a bed of 12 mm.

Av. Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white cement etc.com. For

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps & dado on

mm. th. C.M.1:3(1cement :3 sand) including necessary cement paste for fixing and joined

with white cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on

49 a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 25.00 960.42 S.M.

pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm

50 thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 20.00 1037.25 S.M.

Providing & laying marble stone slab flooring over 20 mm.av. base of C.M.1:6 ( 1 cement :6

51 coarse sand ) & jointed with grey cement slurry incl. rubbing & polishing comp.(A) Marble 15.00 2246.54 S.M.

slab 25 mm. Thick.

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on

bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid

52 and finished with flush pointing in white or colour cement including rubbing and polishing 30.00 2410.00 S.M.

complete. ( Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars laid

on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush

pointing in white or colour cement including rubbing & polishing comp.. (Basic Rate:-

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm

thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement, including rubbing & polishing

comp.. (Basic Rate:- Rs.1000.0/S.M.)

Labour Charges For Half Round Edge For Granite

Labour Charges For Quater Round Edge For Granite

Labour Charges For Edge Finished For Granite

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani,

Bell, Asian or Euro make in flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing

on existing flooring by adhesive material including dismentaling of existing flooring and

58 jointed with colour cement slurry including finished with flush pointing & cleaning the 50.00 1467.72 S.M.

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps

59 and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) 50.00 1092.37 Sqm.

finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps

60 and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with 150.00 1135.80 S.M.

white cement slurry.

Providing and laying chequered precast concrete tiles 22mm thick with aggregate of

sizes upto 6mm in floors treads of steps and landing on 20mm thick bed of C.M. 1:6 (1

cement : 6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 sand) jointed with neat cement slurry

with pigments to match the shade of the tiles.

Providing and constructing sandwitch type Polish Kota Stone cooking platform 0.6 mt.

wide & 0.75 mt. height, including one end side Polish Kota stone (Double Polish) of 1.25 mt.

height & front Polish Kota stone patti of 10 cm wide, vertical partitions of half B.M. wall in

C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement slurry as required

and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction given by site in charge at all

Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide

& 0.75 mt. height, including one end side granite stone (Double Polish) of 1.25 mt. height

& front granite stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M.

1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make

with required all fitings & fixitures etc. comp as per instruction given by site in charge

at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

Providing & fixing at all floor levels,both face polished machine cut edge green kota

64 stone slab (30mm) for urinal partition joined with grey cement slurry (1:1) incl. 7.00 900.00 S.M.

Rubbing & polishing etc. complete. (M.R.)

Providing & fixing at all floor levels,both face polished machine cut edge Marble slab

for urinal partition joined with grey/White cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

Providing and laying rough chiseled dressed stone flooring over 20mm thick base of

66 cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including pointing with cement 0.00 576.79 S.M.

mortar 1:2 (1 cement : 2 stone dust) etc. (A) 25mm thick

Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be

67 tempered to bring mortar creme out upto surface using white cement including 15.00 779.70 Sqm.

rounding off junctions and extending them upto 15 cm along the wall clearing with water

and oxalic acid etc. as directed.

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof

Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as per approved shade & texture, of

make incl. Sal wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with nessary

screws & Anodized aluminum fixtures & fastenings For all Floor

Same as Above But Without Frame 8.00 2520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory

windows incl. Indian teak wood frames of finished size 12cm x 7cm.incl. anodized

aluminum fixtures & fastenings incl. Primer coat of approved quality & two coats of oil

painting etc. For all Floor

(A) Fully Panelled 8.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 8.00 5185.03 S.M.

(C) Fully Galzed 8.00 4836.39 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and clearstory windows

including anodised alluminium butt hinges with necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium door -

(A) S.S. Stopper 60 Cm long of ASIS 304 30.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 30.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 30.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 30.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 30.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 30.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 30.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 30.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 30.00 873.05 No.

(J) Inter Lock [Kadaka lock] 30.00 209.71 No.

(H) Locks Godrej Mortice lock cover 30.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 30.00 479.33 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 30.00 59.91 No.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

(K) S.S. Door / window hinges 4x1"x1" 30.00 54.78 No.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with

wood grain raised panneled design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected

71 polyurethene foam done in situ along with embedded wooden pieces for stiffening & also 25.00 2019.98 S.M.

taking hinges & fixtures. The whole FRP frame & shutter is to be water proof weather

proof,termite proof &resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges

with fastener sleeve & alluminium fixtures & fastentings.

Providing and fixing window having extruded aluminum Colour anodized section frame

main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size

72 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal 10.00 2140.33 S.M.

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x

18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant

(A) Same as above but Colour anodized 10.00 2140.33 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame

main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal

section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x 1.50 mm

(of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member

73 size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical 10.00 1591.87 S.M.

member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of

kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per

(A) Same as above but Colour anodized 30.00 1591.87 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame

main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal member

size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour

tineted float glass with powder coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 30.00 1705.67 S.M.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm

x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 10.00 1175.56 S.M.

Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm

(of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium

frame with 5 mm thick transparent bronze colour tinted float glass as details etc. complete

for fix window.

(A) Same as above but Colour anodized 10.00 1833.29 S.M.

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with

aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make

having Poder Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm having

weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top & bottom:

1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick

prelaminated sheet of Greenlam, Panama or archid make as approved by Engineer-

(A) Same including fixing

as above but brassanodized

Colour pivot, handle, lock etc. complete. 15.00 3237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled

partition using medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle

section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of approved make

78 including all other necessary fittings and fixtures. Entire work will have to be made water 10.00 2400.00 S.M.

proof using necessary rubber sectioned wherever required. Gaps all round the frame to be

filled with approved water proof sealent. Bottom portion of doors both side to be covered

with 12mm thick prelaminated particle board of approved make and quality and as per

(A) Same as above but Colour anodized 35.00 2400.00 S.M.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge & necessary

79 hardware materials etc. complete as per instruction by engineer in charge. 5.00 1350.00 S.M.

Providing & laying Non reflective solar contact film for fixing on glass as approved

80 colour,design,cutting complete as per instruction by engineer in charge. 20.00 406.57 S.M.

Providing & fixing door closer Ozon / Dorma / Hyper / Hardwin / Godrej / Alluminium

81 body ISI brander equivalent make with necessary hardware materials etc. complete as per 10.00 1400.00 Nos.

instruction by engineer in charge.

Providing & fixing water proof plywood (ISI marks 710 grade) at the door,window and any

82 space in the building. necessary hardware,screws materials etc. complete as per instruction

by engineer in charge.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all

floor levels with M.S. flats at required spacing & frame around square or round bars with

round headed bolts & round headed bolts and nuts or by screws incl. Priming coat of Red

lead paint etc. comp. (A) Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with vertical channels 20 x10 x

mm. Braced with flat iron diagonals 20 x5mm size with top & bottom rails of T-iron

84 40x40x6mm. with 38mm dia. steel pulleys comp. with bolts, locking arrangements, 10.00 6158.35 S.M.

stoppers, handles incl. applying a priming coat of Redlead paint etc. comp.

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as in

main & cross beams,hip & trussed purlins connected to common raffers & the like 30.00 9108.48 Qtl.

(B)For work like chain link fencing, above compound wall etc. 5.00 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 0.00 10197.11 Qtl.

Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting,

86 Welding & Fixing in position Purlin, Main Chord etc. as per Engineer- in-charge.TATA / 4000.00 126.00 Kg.

JINDAL / ASIAN Make

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

87 fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel 450.00 450.00 Kg.

bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with nuts, bolts,

88 washer or G.I. pins, excluding M.S. angles etc.complete as per relevent IS specification & 50.00 311.00 S.M

directed by engineer in charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing with

89 necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.) pins, hooks, 150.00 125.00 Kg.

excluding M.S. angles etc. complete as per relevent IS specification.& directed by engineer

Providing and Fixing hot dip concertina coil of 610 mm dia. made out of 2.59 mm (12

SWG) hot dip galvanized (G.I. coating not less than 200 gm/sqmt.) th. wire having 80 nos.

of spikes and 200 nos. of clips made out of stainless steel (AISI 304) 1.5 mm th. dia., G.I.

strips 0.5 mm th. ( G.I. coating not less than 120 gm/sq.mt.) weight of one coil should not

be lesss than 15 kg. etc., complete at the top of compound wall fixed with S.S. clips and

binding wires whereever necessary etc. complete. ( NOTE: Strctching length of one coil

should not be more than 9 mt.)

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet

91 mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia with 250.00 999.00 S.M.

bituman and impet washer filled with white lead etc. Excluding the cost of purlins rafter

and trusses. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L

92 Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet 20.00 734.19 S.M.

washer. filled with white lead complete excluding the cost of purlins, Rafters and

Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L

93 Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.

(1) 0.63 mm thick sheet. (Tata / Jindal or equivalent)

(ii) 0.63mm THick Sheet 50.00 1016.00 S.M.

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-

94 3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including 30.00 581.32 R.M.

marking necessary connection with rain water pipes.

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks

95 bolts and nuts 8mm dia G.I. limpet and bitumen washer complete (i) 0.80 mm thick 30.00 664.70 R.M.

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3

gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking

necessary connection with rain water pipes. (ii) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L"

97 hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer complete (ii) 0.63mm thick 15.00 464.00 R.M.

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main cladding on

both edges. All fixing holes must be predrilled oversize as specified for the sheet length and

fastener being used. Fasteners must be fitted with approved washers. Fixings should be

tightened to ensure a weatherproof seal but they must not be over tightened Side-lap

98 fasteners must also be installed at specified centers with the FRP sheet having clearance

holes provided as per the main fasteners Weatherproofing shall be provided at all flashing

points under the normal flashing by the fitting of a foam closure strip to match the profile

being used. Closure strips will be sealed to the sheet with an appropriate non setting

silicone sealant. Excluding the cost of purlins rafter and trusses. S.M.

(a) 1.5 mm thick 5.00

(b) 2 mm thick 15.00 1100.00 S.M.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is coated with

an anti-UV Co-extrusion layer having good weather resistance, it can maintain its optical

properties and mechanical performance for a long time. Fasting is usually done by screws.

The fastening screws should be inserted about 500 mm apart and 300mm apart Along the

supporting internal purlin and edge pulin.All fixing holes with diameter at least 2 mm

larger than screw must be predrilled into each screw location. The screws should be 6mm

diameter with length according to sheet thickness and corrosion resistant, with at least

heavy duty hot dripped galvanized or stainless steel. Excluding the cost of purlins rafter

(a) 1.5 mm thick Solid Sheet 5.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 5.00 1510.00 S.M.

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete

100 also horizontaly in line and connecting to purline angle etc by welding rereting etc. (a) 10.00 750.00 R.M.

Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete

101 also horizontaly in line and connecting to purline angle etc by welding rereting etc. (a) 10.00 485.00 R.M.

Medium duty "B" Class

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths

inter locked together through their entire lenght and jointed together at the ends by end

102 locks mounted on specially designed pipe shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete

(A) Shutters having width below 3.5m 5.00 3554.40 S.M.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths

inter locked together through their entire lenght and jointed together at the ends by end

locks mounted on specially designed pipe shaft with bracket plates, guide channels

and arrangements for inside and outside locking with push-pull operation including the

cost of hood cover and spring etc. complete. (B) Shutters having width 3.5 M and above

Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or weight not less

104 than 7.75 kg.per Sq.M. to window frames etc. including 60x 20mm beading of teak wood. 10.00 762.20 S.M.

Painting two coat (excluding priming coat) on new steel and other metal surface

105 with synthetic enemal paint, burshing to give an even shade including cleaning the surface 30.00 68.57 S.M.

of all dirt, dust and other foreign matters.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with

106 hooked ends to RCC slabs curing, layig including painting the exposed portion of loops, all 30.00 135.47 No.

as per standard design complete.

Distempering two coats with oil bound washable distemper of approved brand &

manufacture & of required shade on wall surface to give an even shade over and &

including a priming coat of alkali resistance primer of approved brand after throughly

brushing the surface to give an even shade after throughly brushing the surface free from

mortar droppings and other foreign matter and also including preparing the surface even

(A) For wall 500.00 75.84 S.M.

(B) For ceilings 350.00 84.37 S.M.

--do---- Extra Subsequant coat over above Item

(A) For wall 500.00 31.91 S.M.

(B) For ceilings 350.00 35.25 S.M.

Apply two coats of putty and two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other matter and sand papered smooth.

Distempering two coats on previously distempering wall (without primer) with oil

109 bound washable distemper of approved brand & required shade on wall surface to give an 125.00 60.63 S.M.

even shade after throughly brushing the surfaces clean of all grease, dirt loose places of

sceles & also including preparing the surface even and smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

For every subsequent coat Extra over item no.above 50.00 35.41 S.M.

Applying Priming coat over new steel and other metal surface after over and including

preparing the surface by throughly cleaning oil, grease dirt and other foreign matter and

scoured with brushed fine steel wool, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats of enamel paint (Excluding priming coat) over previously painted

112 wall after removing entire surface with even shade & surface after removing dirt, dust 150.00 60.00 S.M.

foreign matter etc. comp.(M.R.)

Painting two coats of enamel paint over priming coat (including priming coat) on

wall after removing entire surface dirt, dust foreign matter & also incl. preparing the

surface even & sand papered smooth etc. comp.(M.R.)

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & applying two coats of weather shield max paint (3 coats may be required in

case of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers specification and directions in shade and

colour approved by architects, on exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and

flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by

114 water jetting if required. Fill up all minor cracks and defects with white cement and sand 300.00 82.00 S.M.

mixture in the ratio 1:3. For application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application

of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max paint

Box Cutting the road surface to proper slope and camber for making base includinng

115 removing the excavated stuff and depositing on the road side slope as directed up to 50 mt. 10.00 109.41 C.M.

Preparation of subgrade with Compacting, Levelling and consolidation of subgrade with

miniroller /plate vibrator machine including watering and filling in depressions which

occur during the process as directed by engineer in charge.

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming &

consolidation etc. complete.

Providing, Supplying & Sprading of Gravel in Play area including dressing etc. comp.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted thickness

over the base including necessary compaction, watering etc. complete. Item includes

leveling by using vibratory plates compacted machine and as directed by engineer in

Providing & laying Granular sub base (GSB)confirming to Grading-V of Table 400.0 of

compacted thick of 150mm with specified graded stone metal and sand mixed in place and

120 laid with mechanical means spreading with motor grader and compacting with vibratory 50.00 1469.00 C.M.

roller having minimum 80-100 KN static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift etc. complete.

Removing & resetting existing readymade c.c. kerb stone of required size & thickness in

121 line .level and in truly vertical position including filling joints in C.M. 1:1 (1 part of cement : 50.00 56.00 R.M.

1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand)

including watering etc. complete and as directed by engineer in charge. (M.R)

122 Removing and Resetting of Paver block of walk-way with necessary sand / pana filling and 150.00 102.00 S.M.

make in line and level with necessary vibrating using compactor machine.

Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 380mm)

purchased from SMC's approved paverblock manufacturer & setting in line, level and in

123 truly vertical position, including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone 75.00 228.00 R.M.

dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including

watering etc. complete

For rounding and

at the edge of as directed

footpath by fanning

(For engineerportion)

in charge. 10.00 274.00 R.M.

Providing interlocking type Rubber moulded cement concrete paver block of approved

shape, design & colour having 60mm thickness (M-35) purchased from SMC's approved

paverblock manufacturer only & fixing of fine sand bedding. Item includes levelling by

124 using vibratory plates compacted machine. Item also includes all materials, labour,

equipments,tools, plants, watering, cleaning etc. complete.

With colour 50.00 524.00 S.M.

Without colour 100.00 524.00 S.M.

Providing & fixing interlocking type Cement Concrete paver block of approved shape &

design having 60 mm thickness (M-40) purchased from SMC's approved paverblock

125 manufacturer only on fine sand bedding. Item includes leveling by using vibratory plates 5.00 553.00 S.M.

compacted machine. Item also includes all materials, Labour, euipments, tools, plants,

watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 3.00 714.00 S.M.

Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3 graded

stone agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating

surface with a skim powder floater, curing etc. complete.

Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 graded

127 stone agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating 2.00 5245.25 C.M.

surface with a skim powder floater, curing etc. complete.

Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with filling of

epoxy sealent as directed by engineer in charge

WATER SUPPLY & SANITARY ITEMS

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor levels, size

580mm incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern of approved colour For all Floor

Providing and fixing Wash Down Water closet European type W.C. pan with integral P

or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :

find sand) (seat and cover to be measured and paid for separately) (A) Viterous china

pattern - I (i) in approved colour

Providing and fixing plastic seat and cover for wash down water closet with C.P. brass

hinges and rubber buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making good the same incl. fittings such as

pillar tap, capstan head screw down high pressure with screws, shanks & back nuts, C.P.

Brass waste trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous china

flat back wash basin 550 mm.x 400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting the Urinal with waste

134 pipe, tap etc. complete. (A) White earthenware flat back or corner type size 430 mm x 25.00 1074.86 Each

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels,

135 mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass 12.00 859.41 No.

screws and washers etc. For all Floor

Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished bright etc.

comp.-(A) 15mm dia. For all Floors

137 Providing and fixing waste Pipe for Washbasin or sink (A ) 32 mm Dia 50.00 67.91 No.

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, size

500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet squatting pan joining

the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar ,HindWare 20143 7.00 3277.39 No.

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S

trap with normal closing seat cover L bend ncluding jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, HindWare sleek

20011, Jaquar- CNS-WHT-751P180SPPZ

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water

tight C.I. cover with frame of 300mmx300mm size (inside) with weight includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps---(A)

100mm x 100mm Size -P type

(A) 100mm x 100mm Size -P type 7.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber

& water tight Pre cast R.C.C. cover of 300mmx300mm size (inside) includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps--

(A) 300mm x 300mm Size -P type 7.00 1098.05 No.

(B) 150mm x 100mm Size- P Type 0.00 1052.77 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm &

mm deep sewer trap chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4

mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10

& fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 3.00 2915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2.00 233.85 Each

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete

1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 15.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556 (Part-2 )

with C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall

with C.P. flange complete including cutting and making good the walls and floors wherever

Make -Cera,Parry ware, Jaquar, HindwareMake- CeraCat. No. S4020103, Parry ware

C0501*, Jaquar URS-WHT- 13261H ,HindWare BACK SMALL

Providing & fixing Wash Hung basin with single hole for pillar tap, Size- 550 x 400 mm at

145 all floor levels, with C.I. or M.S. Brackets painted white incl. cutting holes & making good

the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick

146 in bath room with polished wall flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N ,HindWare

Providing & fixing S.S.towel rail of 600 mm long approved make including, providing &

fixing C.P. brass screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM ,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including

providing & fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N ,HindWare F880011

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome plated PVC

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 ,HindWare F160109

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

152 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ ,HindWare F860075

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 ,Parry ware

T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,HindWare 7.00 2056.47 No.

F280052 & CONCEALED STOP COCK F850105

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting

154 pipe 450 mm long and nuts, washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare

Cat. No.: F160144

Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N

,HindWare F650013

Providing and fixing C.P. Brass pillar cock with copper connection ,C.P. Brass screws

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following

nominal internal diameters incl. Testing of pipes and joints etc. Comp

Providing & laying in trenches galvanised mild steel tubes(medium grade) TATA /

159 ZENITH / ASIAN / JINDAL MAKE of the following nominal bore & tube fittings etc. comp..

Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal

bore, tube, fittings & clamps incl. making good the wall ceiling and floor etc. complete.

Providing & Fixing gun metal check or non return full way wheel valve at all floors

levels, etc. complete.

Decorative wall paintings with designing, painting at place with all necessary materials

163 Providing and fixing Supply Pipe for Washbasin or sink 50.00 80.00 No.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

164 Providing and fixing Jet Sprey Cock at all floor level etc. complete. 25.00 500.00 No.

165 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 12.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 12.00 200.00 No.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight not less

than 35 Kg. etc. complete.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge system

at all floor levels incl. All fixtures like bends, tees, shoe etc. jointed with resin of approved

brand & manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand & manufacture etc.

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand & manufacture etc. comp. Pipe shall be fixed

170 on the wall the help of clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with

jali of the following nominal diameter of self cleaning design with C.I. scread down or

hinged grating including the cost of cutting and making good the walls.

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design to C.I. Or

173 S.C.I pipes including the cost of cutting holes & making good the wall etc. Complete - 100 25.00 30.00 No.

mm. dia. (M.R.)

Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved design to

174 C.I. Or S.C.I pipes including the cost of cutting holes & making good the wall etc. Complete - 15.00 20.00 No.

100 mm. dia. (M.R.)

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes

175 including the cost of cutting holes & making good the wall etc. Complete - 100 mm dia as

per architect instructions.

(C) 110 mm dia to upto 150 mm dia 15.00 90.00 No.

(C) 150 mm to 200 mm dia 15.00 98.00 No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with

176 cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 5.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 20.00 180.00 R.M.

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark water

177 tank of required capacity each with all necessary fittings & connection etc. complete on 15000.00 3.95 Lit.

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering,

vibrating, curing & mixed with approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing admixture as water proofing agent

to be mixed with 50 kg. cement bag shall be as recommended by the manufacture of the

water proofing material, concrete work for top, bottom slab & side pardi for Under ground

Tank & Item incl. Necessary excavation & refilling the available earth, 15 cm th' C.C 1:4:8

178 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc. comp. incl. Locking arrangement,

outlet, inlet, overflow & wash out pipe arrangement as necessary & C.I. Cover 0.60 x .045

weight not less then 35kg. etc. com. as per structural drawing excluding Steel & as directed

by Engineerin- charge

Underground tank 15000.00 6.87 Lit.

Providing and filling in depressions of Bath and W.C. At all floor levels, after completing

179 plumbing work of pans, pipes,traps etc.with cinder or fly ash as directed by Engineer in 5.00 500.00 C.M.

charge etc. comp..

NOTE :- (1) The whole work is to be executed through specialized agency with a guarantee

of 10 (Ten) years given on a prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C.,kitchen and the like consisting of : (a) I course of applying

cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS :

in recommended proportions. (b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th' in the floor of the depression & 125.00 296.00 S.M.

about 18mm th' On the side walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the floor level for a height of

mm. with surface suitable to receive further treatment (c) Finishing top with stone

aggregate 10mm to 12mm nominal size spreading @0.008 C.M./S.M., thoroughly embedad

(B)plaster layer.and

Providing as per specifications

laying & instructions

integral cement based of Engineer

water in charge

proofing (Cementincluding

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 125.00 511.00 S.M.

50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally covered

by jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in a shape of quarter round vata Incl.

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and horizontal surfaces like

consisting of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed with water

proofing compound confirming to IS:2645 in rcommended proportions. (b) II corse of

20mm cement plaster 1:3 mixed with water proofing compound in recommended

181 proportion (c) III course of applying blown or / resideal bitumen applied hot at 1.7 kg per 50.00 505.00 S.M.

sqm of area. (d) IV course of 400mm micron th. PVC sheet. (Overlaps at joints of PVC sheet

should be 200mm wide and pasted to each other with bitumen about 1.7 kg./ sqm.)

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including

neat cement finishing, watering etc. complete..

183 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 20.00 101.91 No.

Providing & Fixing chromium plated brass half turn flush cock at all floor levels, of

approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A) 25 mm.

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical

surface.Steel work welded in built up sections, framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint in beams & joists channels

angles, tees, flats with connection plates or angle cleats as in main & cross beams, hip &

trussed purlins connected to common raffers & the like.

Providing & fixing black board on walls of 1.8mt.x1.2mtsize made up to 12 mmth.B.W.P

.Plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) fixed with

187 teak wood beading of 65 mmx 50mm size, rubbing & sanding comp., incl. applying two 1.00 4193.00 No.

coats of black board paint over a priming coat on plywood & French polishing the frame all

round etc. Comp. as per instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 18mm thick

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) commercial plywood

188 with 1.0mm thick lamination sheet fitting with teakwood moulding table top supported on 1.00 14774.00 No.

3" x 3" teakwood leg & 3" x 11/2" teakwood framing top and bottom with french polish

labour work hardware etc. as per site in charge instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with 1.0mm thick lamination

189 sheet table top supported on 2" x 2" teakwood leg & make 3 nos. drawers of 1' 3" width on 1.00 8390.00 No.

both side with necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing ( Size 4' x 2'-6" x 2'-6", all framing other then legs are

teak wood of size 2" x 1")

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green board &

190 0.8mm backside white laminate & with good Quality of adhesive with 3.00 5195.00 No.

appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx 50mm

size, rubbing & sanding comp., as per instruction of Engineer in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick with

191 appropriate fittings and Alluminium fittings comp., as per instruction of Engineer in charge 2.00 4230.00 No.

Providing & Fixing simple 12mm thick commercial plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) Rack of size 6' x4' and depth 1'-6" 5 Nos.

192 horizontal partition, supported 2" x 1" framing with necessary french polish hardware 1.00 7690.00 No.

labour etc. as per site incharge instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) magazine stand of Size 6' x 4' with 3" x 11/2"

193 vertical supporting and adjustable lag support and horizontal simple 2" x 1" teakwood 1.00 6745.00 No.

patti for magazine support with necessary french polish hardware labour etc.as per site in

charges instruction and as per drawing.

Cutting out cracks of wall or terrace to V section ,cleaningout, grouting with cement and

sand slurry 1:3 (1 cement : 3 sand ). at any height

Providing and fixing Soft Pin Board With Aluminium Frame As per Design by architech

and engineering in charge for Fix Soft Pin Board

Providing & fixing of 50% Blackout window curtain (Diamond Pattern) with Cloth aster

196 with S.S. 25mm Hollow Pipe With Covers.As per attached drawing & instructed by in 30.00 870.00 S.M.

charge Consultant.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles shall have , light reflection

85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel sections (galvanizing @120

grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm

197 centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling tiles of approved

texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making

opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long

dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed

with 24mm of all T-sections shall be pre-painted with polyester baked paint,

Supplying and Fixing of Suspended ceiling system components which includes Single Layer

Boarding with 12.5mm thick USG Boral Standard Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick having one flange of 20mm and another

flange of 30mm and a web of 28mm) screw fixed to brick wall/partition with the help of

approved screws at 600mm centers. Then suspending of USG Boral Thundersteel

Intermediate channel (45mm x 0.90mm thick with two flanges of 15mm each) from the

soffit at 1220mm centers with of USG Boral Thundersteel Ceiling Angle

(25x10mmx0.50mm thick) fixed to RCC Slab with of USG Boral Soffit Cleat

(37x27x25x1.6mm thick) and 8mm dia 40mm long Anchor Fastener @ 600mm Centers,

respectively. USG Boral Thundersteel Ceiling Section (having web of 51 mm and two

flanges of 27mm each) are then fixed to the of USG Boral Thundersteel Intermediate

channel with the help of connecting clip (2.6mm Dia) and in perpendicular direction to the

USG Boral Thundersteel intermediate channel at 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 35.00 958.58 Sq. Mt

CEMENT SHEET CEILING

Providing and fixing of Cement sheet ceiling using aluminium channel & pipe, screws etc.

complete with all material, labour with all lead, lift and transport. and finished by

approved shade of plastic paint (Basic Rate for 8 mm plain cement sheet : 35 rs./sqft.)and

finished and complete the work satisfactorily as per instruction of architect or Engineer-in

charge And as per " Architecture" detail.

Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer

200 in charge in 4mm to 6mm thick tiles joint including spacer with cleaning of joint by vacuum 30.00 40.00 R.MT

Sr. S.O.R. 2024-2025 (Without GST)

No. Rate Per Amount

Applying polymer modify mortar in proportion at 1:2(one part cement: 2 part white

sand(sweet water) with chemical(SBR) dosage of minimum 5 litre pe bag of cement. Also

201 apply bonding agent prior to polymer modify mortar in proportion of (1:1)(1 part SBR :

part cement) using Roof, MC and FOSROC

Beam / Columns 10.00 1830.00 S.M.

Ceiling 10.00 1830.00 S.M.

Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar after openning

202 crack in "V" grove, Making Surface dust free, with a bond coat of polymer as per the data 25.00 120.00 R.M.

sheet for crack repairing cracks less than 8mm

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with

cement and sand slurry 1:3 (1-cement 3-sand )

Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with celling rebar

204 column as per directed by enginner incharge rate excluding the rebar cost . 10.00 546.00 S.M.

Providing and filling the expansion joint by polymer confirm to BS4254-1983 as per

required shade and specification by making groove of 50 mmx12.5mm lather by cutting

204 or by repairing groove and removing mortar dropor anyother foreign materials including

applying primer and filling required size (over size of joint PU foam etc. complete.)

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments, tools,

material, labour, etc. Standard procedure as mentioned in manufacturer's specifications

shall be strictly followed, which shall be submitted and got approved from the authority

prior to start of work. The rate shall also include cost of drilling of hole of required

diameter and depth as

mentioned in manufacturer's specification, cleaning the hole with required air blower and

other necessary tools and tackles, positioning, providing and grouting chemical, allied

fixtures and fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc. complete as

directed by the engineer-incharge.

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material consistment

with ISI specification. Using Chlordene and Chiorpurfiles 20 EC. As per 6131_paret-II

206 Consentration Weight one percent is recommended i.e. one litre 20 EC chemical 150.00 87.03 Smt.

emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended as per IS.

Anti-Termite System:Providing and laying of permanent piping technology

anti-termite treatment before flooring work by installing LLDP (Low linear density

polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having working pressure of

Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall

be installed at the entire periphery of the building and at internal network of building at

207 a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as per 30.00 134.33 S.M.

building layout ) & Ends of loop pass through a PVC elbow of minimum 32 mm ID at

junction box of wall and floor level, entering into a steel reinforced grooved

flexible pipe of minimum 22 mm ID leading into junction box and the loops shall

terminate in junction boxes & test every junction during injecting chemi 0.30 mm

thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at

600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length

RCC Core Cutting is about making precise, circular cuts for creating holes of required

diameters for Rehabilitation in civil works. The core drilling rod is fitted with diamond

pieces at the drilling end. The core cutting machine can be used for both horizontal and

vertical hole making purposes.

TOTAL AMOUNT RS.

TOTAL AMOUNT RS.

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SURAT MUNICIPAL CORPORATION