Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹5.9 L+₹89,700 (18.0%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | Rejected-Technical | - | Rejected-Technical DISQUALIFIED | |
| 4 | Rejected-Technical 7 91 KOTTARAPATTI PATHALAPETTAI POST TIRUCHIRAPPALLI TAMIL NADU 620013 | TIRUCHIRAPPALLI | TAMIL NADU | 620013 | - | Rejected-Technical DISQUALIFIED |
| Sl No | Description | Qty | Unit | A. SUTHAHAR L1 | CROWN ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil | 15 | Cum | 190 ₹2,850 | 180 ₹2,700 Lowest |
| 2.00 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from naturalsources : 10 graded stone aggregate 40 mm nominal sizederived from natural sources) | 2 | Cum | 4,200 ₹8,400 Lowest | 4,350 ₹8,700 |
| 3.00 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 9 | Cum | 5,000 ₹45,000 Lowest | 6,500 ₹58,500 |
| 4.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 2,500 | Kg | 89 ₹2,22,500 Lowest | 108 ₹2,70,000 |
| 5.00 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 370 | Sqm | 580 ₹2,14,600 Lowest | 615 ₹2,27,550 |
| 6.00 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 130 | Sqm | 40 ₹5,200 Lowest | 160 ₹20,800 |
Tender Value
Refer Docs
EMD Value
₹20,120
Closing Date
3 Dec 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, EMD Department
The Executive Engineer, EMD Department
Providing Galvalume sheet partition (Temporarily) on eastern side boundary of BERYL Hostel at NIT-Trichy
2025_NITT_883597_1
NITT/EMD/CVL/Tender/2025-26/14
Open Tender
Civil Works
Works
60 days
NIT
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹20,120
19 Mar 2026
31 Oct 2025
6 Dec 2025
31 Oct 2025
3 Dec 2025
31 Oct 2025
31 Oct 2025 - 14 Nov 2025
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.36 MB
Tender.pdf
Tender Documents • 0.54 MB
tech.xls
Additional Documents • 0.03 MB
BOQ_928735.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .