Loading
Loading…
Loading…
Tender Value
₹1.7 Cr
EMD Value
₹2.4 L
Closing Date
13 Mar 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
NORTH
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- F 1a-c Any Railway track work including track maintenance work.
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division) before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
Tender value is including escalation of (-)15% (Minus Fifteen Percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Improvements to P.Way Assets in ADEN/NLDA section under DEN/North/GNT Jurisdiction
487-DRM-W-GNT-Tid-2843
487-DRM-W-GNT-Tid-2843
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹2.4 L
13 Mar 2026
19 Feb 2026
27 Feb 2026
35 items across 3 schedules · ₹1,76,04,024.62 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | For 1.00m long fishplates | Joint | 587.00 | 112.94 | 66,295.78 |
| 2 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination weld/rail by departmental official nominated by Engineer In charge and lubrication fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as procedure laid down in latest version IRPWM, including all tools required and directed by Engineer-in-charge. Note: Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall cut using chisel and hammer and replaced with new bolt. | Set of of per of as 1. be | 5763.00 | 45.12 | 2,60,026.56 |
| 3 | Lubrication of Elastic Rail Clips on sleepers as per procedure prescribed in latest edition of IRPWM with Railway's grease. | PSC ERC | 700000.00 | 1.95 | 13,65,000 |
| 4 | Removing seized ERC from SGCI inserts existing track by using suitable approved chemicals and re-fixing after greasing insert eye and ERC with Contractor's grease of specified quality as per provisions IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection SSE/P.Way and marked prior to execution this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty 50% of the basic cost of new sleeper nearest sleeper factory shall be levied each, if SGCI insert is broken or sleeper gets cracked in the process. | of ERC of of of of of in on | 4840.00 | 44.66 | 2,16,154.4 |
| 5 | By using Railway's Grease graphite | Each | 11000.00 | 26.99 | 2,96,890 |
| 6 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid damage to the sleeper 3.A penalty of 50% the basic cost of new sleeper in nearest sleeper factory shall be levied on each, sleeper gets damaged in the process. | Each the any of if | 1100.00 | 250.56 | 2,75,616 |
| 7 | 1 in 8½ Points & Crossing | Set | 20.00 | 11,565.13 | 2,31,302.6 |
| 8 | 1 in 12 Points & Crossing | Set | 20.00 | 15,720.77 | 3,14,415.4 |
| 9 | Boxing and profiling of ballast as procedure prescribed in latest edition IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting same in crib and shoulder by leading to maximum of 50m including crossing of track, deweeding on ballast section etc and directed by Engineer-In charge. | per TRM of the a as | 90000.00 | 22.66 | 20,39,400 |
| 10 | For PSC sleeper Track with Sleeper Density 1540 sleepers/Km or more | of TRM | 5000.00 | 153.29 | 7,66,450 |
| 11 | With Contractor's hard wood block. | Each | 250.00 | 2,239.07 | 5,59,767.5 |
| 12 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer charge to keep drains clean and clear cuttings etc. | RM in- in | 9000.00 | 27.86 | 2,50,740 |
| 13 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified Engineer in-charge including disposal branches, bushes outside cess/yard. | TRM by of | 50000.00 | 12.82 | 6,41,000 |
| 14 | Kilometre & Gradient post | Each | 500.00 | 85.27 | 42,635 |
| 15 | LWR / SEJ Board | Each | 200.00 | 150.25 | 30,050 |
| 16 | Level Crossing Boards including Road Sign Boards | Each | 504.00 | 170.99 | 86,178.96 |
| 17 | Level Crossing Post | Each | 130.00 | 169.17 | 21,992.1 |
| 18 | Curve Post | Each | 150.00 | 90.22 | 13,533 |
| 19 | Curve Board | Each | 75.00 | 150.25 | 11,268.75 |
| 20 | Miscellaneous General Boards, Jurisdiction Boards, Structures etc. | Sqm | 1000.00 | 116.55 | 1,16,550 |
| 21 | Removing and refixing of guard Rails over slab bridges during machine packing with contractor's men and materials duly removing fittings, leading guard rails bridge approaches, lifting, dragging, positioning and crossing of track etc, and directed by Engineer In charge. | TRM all to as | 507.00 | 91.01 | 46,142.07 |
| 22 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 800.00 | 329.1 | 2,63,280 |
| 23 | All type of PSC sleepers | MT | 600.00 | 359.4 | 2,15,640 |
| 24 | P.Way fittings of all types and other similar loose items | MT | 500.00 | 333.41 | 1,66,705 |
| 25 | With Contractor's hard wood block | Each | 50.00 | 2,736.89 | 1,36,844.5 |
| 26 | Manufacturing and supply of circular STOP Disc of 600mm dia for fixing on emergency chains at level crossings as given in IRPWM including providing Retro reflective sheet fully covered over board confirming to type-IV ASTM-D4956 in red back ground colour text "STOP" of white colour over back ground. The circular board shall consists of 2mm thick Aluminium sheet fixed to 1.5mm thick S h e e t of 600mm dia with suitable sized aluminium alloy rivets @ 20 cm c/c to back- support .Retro reflective sheet is to be pasted on substrate by an adhesive backing which shall be activated by applying heat pressure conforming to class-2 of ASTM-D- 4956-01.A vertical holding stand of 1000 length x15mm thick to be jointed to back side of board along with a hook for fixing emergency chain as directed by Engineer charge. | Each of and MS and mm In | 40.00 | 3,565.1 | 1,42,604 |
| 27 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing matting inside the refuge by keeping them upside down position with a minimum of sleepers including levelling with earth, excavation, all lead and lift, crossing tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed the Engineer-in-charge. Note: Earth-work to be paid separately under relevant item. | Each as in 14 of by will | 120.00 | 3,471.5 | 4,16,580 |
| 28 | Supplying and spraying in specified proportion Weedicide Chemical, capable kill entire weed on track / cess / embankment with all labour, material, tools & plants complete job in all respect. Scientific name the chemical is Isopropylamine Salt Glyphosate, in which active ingredient Glyphosate (41%), colour is light amber brownish, very low in toxicity and favourable environmental characteristics. will be ensured that no weed growth occurs up to six months period, otherwise spraying shall be done by the contractor free of cost. | Sqm to etc. of of is to has It re- | 40000.00 | 0.58 | 23,200 |
| 29 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 3000.00 | 870.14 | 26,10,420 |
| 30 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works handling of material | Hour of | 300.00 | 836.21 | 2,50,863 |
| 31 | Arranging labour as and when required by Engineer in charge, for various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. as specifications, special conditions and detailed scope of work as furnished in the tender as directed by the Engineer in charge. Note: Item shall be operated with prior approval concerned Sr. DEN / DEN in charge. | the Day per and of | 2000.00 | 606.09 | 12,12,180 |
| Schedule total | ₹1,30,89,724.62 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Master Tender Document Part I
ATTACHMENT
2841-44MasterDocument01WorksGCC2022withACS10.pdf
ATTACHMENT
2843-44MasterDocument02WorksGCC2022withACS10.pdf
ATTACHMENT
Trackworksconditions-2025.pdf
ATTACHMENT
RevisedBrandsandmakesapprovedlist2025.pdf
ATTACHMENT
Guidelinesforprotectionofcablesatdigginglocations.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .