Strengthening work of the 45.00 meter wide Master Plan road in village Shahpur Bamheta.

Cleaning of jungle including uprooting of rank vegitation grass bush, wood trees and saplings of girth upto 30 cm measured at a hight of 1 meter above ground level & remooval of rubbish upto a distance of 50 meters out side the periphery of area cleared. SOR 2022 SI-259(I)

Construction of granular sub base(GSB) by providing close graded material(GRADE-1) spreading in uniform layers with motor grader on prepared surface, mixing by mix place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per MORTH clause 421 by mix in placed method (AR)

Providing and laying of bituminous macadam with 100-120 TPH (tonnes per hour ) hot mix plant producing an average output of 75 tonnes per hour using crushed aggregate of grading II (19mm nominal size), premixed with 80/100 bituminous binder @ 3.30% by weight of total mix, transporting the mixed material from the hot mix plant to the work site and laid over a previously prepared surface with paver finisher (hydrostatic with sensor control) to the required grade, level and alignment and rolled with smooth wheeled 8-10 tonnes for initial brake down rolling, vibratory roller 8 tonnes for intermediate rolling and finish rolling 6-8 tonnes smooth wheeled tandem roller to achieve the desired compaction and including supply of all material, labour T&P etc. required for proper completion of the work as per clause 504 of MORTH & H pacification and as pertion of Engineer-in-charge(A.R)

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : DSR 2023/16.30.1 On W.B.M. @ 0.60 Kg / sqm (GDA SANCTIONED RATE)

Providing and laying bituminous concrete with 100-120 TPH (Tonnes per hour) batch type HMP (Hot Mix plant) producing an average output of 75 tonne per hour using crushed aggregates of grading I,(13 mm nominal size) premixed with bituminous binder of 60/70 @ 5% of weight of mix and hydrated lime filler @ 2% of weight of aggregate, transporting the hot mix to work site, laying with a hydrostatic power finisher with sensor control to the required grade, level and alignment, rolling with smoth wheeled roller 8-10 tonne for initial break down rolling, vibrator roller 8 tonne for intermediate rolling and finish folling with 608 tonne smooth wheeled tandom roller to achieve the desired compaction and including supply of all material, labour T&P etc. required for proper completion of the work as per clause 508 of MORT & H specification and as per direction of Engineer-in-charge (A.R.) Specification clause 5096

Apply tack coat on surface using Emalsun pressure distributor @ 1.00 kg/sqm. Including coat of emalsun including maintenance of Both two side patries and watering the during operation including supply of all materials, labour T&P etc. required for proper completion of the work as MOSTEH specification no.502 as per direction of E/I. (A.R)