Comprehensive maint including sanitary /bath fitting, plumbing, flooring,Joinery , plastering and roof treatment of 253 Med Regt under AGE BR-II of GE Dehradun.

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar1:4 complete all as specified and directed.

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete/brick surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M & L rendering 10 mm thick on cement mortar 1:4 mixed with water proofing compound finished fair faces of brick/concrete surfaces even and smooth without using extra cement complete all as specified. Note - WPC will be measured and paid separately.

Supply only integral waterproofing compound as per manufacturer instructions complete all as specified and directed.

M & L rendering 5mm thick in cement mortar 1:3 on fair faces of concrete work finished even and smooth as in ceiling without using extra cement complete all as specified and ditected.

M&L for preparing new plastered surface on walls and applying two coat of distmper oil emulsion white or tined over a coat of primer on walls complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified.

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified

Dismentling floor hearth or wall tiling including cement motor bedding (But not backing), removing serviceable tiles to stone and rubbish off the premises, complete all as specified.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 7-8 mm thick in dado/skrting, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick cement plaster 1:4 and complete all as specified.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x600mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc. complete all as specified.

M&L for 18 to 20 mm thick granite stone slab (table rubbed and polished) for cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade stone slab incl 20mm thick screed bedding layer of CM (1:4) complete all as specified and directed. (Note: Edges of slab shall be rounded off and a hole for gas pipe shall be made on cooking platform if reqd)

Taking down chowkat with shutter n. exc 1.5 Sqm each (without removing shutter from frame) complete all as specified and as directed by Engr-in-Charge.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without removing shutter from frame) complete all as specified and as directed by Engr-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified.

S&F 30 mm thick factory made glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood complete all as specified.

S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

S&F in repairs Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and ditected.

S&F mild steel Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work mild steel conforming toFe 290. Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L for two coat of synthetic enamel paint over a coat of primer including preparation on new steel surfaces of any description over 10 cm width or girth complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces, exc 10 cm width or girth including preparation of surfaces, complete all as specified.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F Factory Made Solid PVC Moulded Door Shutter, 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – II 2010 and as directed by GE/Engineer-in-Charge.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed.

M & L for sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S & F mild steel powder coated barrel tower bolts 150 mm long one piece and fixed complete all as specified

S & F mild steel powder coated barrel tower bolts 200 mm long one piece and fixed complete all as specified

S & F stainless steel handles gde-204, 150 mm long one piece and fixed with screws/welded to frame ,complete

S & F mild steel powder coated butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

S & F 300 mm long mild steel powder coated sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified.

S&F in repair peg set of five pegs stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample.

S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified.

S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as specified and directed as per approved sample.

S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Supply, fixing, laying & testing 20mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 15mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

S&F in repair CP toilet paper holder as approved by Engr-in-Charge.

S&F in repair CP brass wall mixer with Telephonic shower, complete all as specified and direcated. Make- Jaquar Cat Part No CQT-CHR-23217 UPR or equivalent in Hindware/ Parryware.

S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed.

S&F in repair CP brass Central hole basin hot and cold mixer fancy type 15mm dia complete all as specified and directed.

S&F in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and approved by Engr-in-Charge.

S&F in repair 5mm thick looking mirror of size 1.20 Mtr x 0.60 Mtr fixed to wall with glass with teakwood beading fixed to wall complete all as specified and directed by Engr-in-charge.

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed.

S&F vitreous china rimless single piece WC of size 35x720x715mm with UF sift close slim seat cover, hinges, fixing accessories and flushing ceistern complete all as specified and directed.

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC white valve less, low level flushing cistern 10ltr capacity with all fittings syphonic action top push type with inlet ball valve and float including PVC flush pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified.

S&F in repair CP bib tap fancy type cast copper alloy 15 mm bore screwed down screwed for iron pipe or for brass ferrule.

S&F in repair fancy type concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 20mm dia iron pipe all as directed.

S&F in repair CP brass fancy type Angle cock 15mm dia ISI mark complete all as specified.

S&F in repair Brass CP shower rose 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm CI 'P' trap.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed in walls complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in reapir PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bend 110 mm dia, any radius with oval access door complete all as required and as directed.

S&F PVC (SWR) bend 75 mm dia, any radius with oval access door complete all as required and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

S&F PVC(SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

S&F in repair PVC nahani trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified.

S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete all as specified.

S&F in repair CP steel Grating round with steel frame with hinge 100mm dia all as per sample approved by Engr-in-charge.

M&L for taking down existing roof treatment of felt etc any thickness or description including cleaning all upto roof slab incluing removing spoil form site and M&L for providing roof treatment as per the following steps :- i) Filling cracks of roof slab with approved chemical sealing compound and applying 15mm thick renedering in CM 1:4 over neat cement slurry @ 3.00 Kg/Sqm over cleaned roof surface with use of approved water proofing compound. ii) Applying a coat of cold applied bituminous primer @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minium weight 3.60 Kg/Sqm reinforced with plyester non-woven fabric (weight not less than 150 gms/Sqm), laid as per the manufacturers instruction with side over lap of 75mm and end over lap of 100mm and finally finished with super silver sheild @ 0.10 Ltr/Sqm. Note : The work of water proofing treatment shall be got executed thorugh manufacturer or their authorised applicator only.

S&F in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below:- Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x3.00 mm Shutter verticle style :- 85x44.45x3.00mm shutter middle Rail :- 83.50x44.45x3.00mm Shutter Top Rail and bottom Rail :- 114.30x44.45x3.00mm ake: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

S&F in repair powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83 x 44.45 x 3.00 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc including dismantling of exixting structure complete all as specified and directed. Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

S&F in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x3.00mm Shutter inner lock size 37.50x15x3.00 mm Shutter side (Handle) size 37.50x15x3.00 mm Chowkhat bottom size : 50.30x26x3.00mm Chowkhat top & sides size: 50.30x26x3.00mm . Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified.

M & L 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in flooring, finished even and fair without using extra cement complete all as specified.

M&L factory made prepolished rubber moulded vibromatic Chequred cement concrete tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified.

M&L for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), 75 mm thick as in sub base etc complete all as specified and as directed.

M&L heavy duty endura ceramic coloured parking tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

Dismantling of wrouth iron or mild steel work of any descrption not otherwise provideed for complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete all as specified.

Supply and fixed pillar taps, , 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed.

S&F in replacement rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed.

S&F in replacement rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed.

S&F in replacement 20 mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified.

M&L for one coat of oil bound distemper of any tint on old walls including preparation of old surfaces complete all as specified in SSR Part I and directed.

M&L for two coat of oil bound distemper of any tint on old walls including preparation of old surfaces complete all as specified in SSR Part I and directed.

M&L for one coat of cement base paint of any tint on external old wall surfaces including preparation of surfaces complete all as specified in SSR Part I and directed.

M&L for two coat of cement base paint of any tint on external old wall surfaces including preparation of surfaces complete all as specified in SSR Part I and directed.

M&L for one coat of whether proof exterior emulsion paint of any tint on old brick / concrete wall surfaces plastered/ unplastered surface of walls including preparation of surfaces complete all as specified and directed.

M&L for two coat of whether proof exterior emulsion paint of any tint on old brick/concrete wall surfaces plastered / unplastered surface of walls including preparation complete all as specified and directed.

M&L for preparation for one coat of white wash on surface of wall complete all as specified and directed (white washing shall be carried out using DDL).

M&L for preparation for one coat of white wash on surface of ceiling complete all as specified and directed (white washing shall be carried out using DDL).

M&L for Preparation of old Steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc ( light, fan, socket, or power and switch, socket, regulator, holders, ceiling roses) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, FRLS 1100 volt grade electric cable of size 1.5 sqmm with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including MS Box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and one run 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed.

All as per item No 110 here-in-above but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No 110 here-in-above but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 110 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, for one 6 pin 15 Amp socket outlet point on independent board

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty PVC casing and caping with all accessories with suitable size of pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly for One light/fan point controlled by one switch , complete all as specified and directed. (Note: Colour code shall be maintained as per IE rule)

All as per item No 114 here in before but point wiring drawing through PVC Case & Caping for one 5 pin 5 Amp socket outlet point on same board with independent switch

All as per item No 114 here in before but wiring drawing through PVC Case & Caping for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 114 here in before but wiring drawing through PVC Case & Caping with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, for one 6 pin 15 Amp socket outlet point on independent board

S&F bell push 5 Amps, single pole all as specified and directed.

S&F electric bell, AC 230V, single pole complete all as specified and as directed.

S&F switch piano flush type single pole, 5 Amps, one way all as per specified & directed.

S&F switch piano flush type single pole, 20 Amps, one way all as per specified & directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed

S&F switch socket combination 5 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F switch socket combination multipurpose 5 & 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge for one light / fan point controlled by one switch. (Note: Colour code shall be maintained as per IE rule)

All as per item No 126 here in before , but wiring drawing through concealed PVC Conduit for One three pin 5 Amp socket on same board with other switches.

All as per item No 126 here in before, but wiring drawing through concealed PVC Conduit for One three pin 5 Amp socket on independent board.

All as per item No 126 here in before, but wiring drawing through concealed PVC Conduit with 4 Sqmm. (nominal area) wire/cable for one 3 Pin 15 amp socket on independent board

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , drawing through exisitng conduit (without socket, elbow, junction box, bell mouth, bend, reducer) and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugsas required for one light / fan point controlled by one switch. ( Note:- 1. Modular switch boxes and cover plates shall be measured and paid separately. 2. Colour code shall be maintained as per IE rule.).

All as per item No 130 here in before but point wiring drawing through exisiting PVC Conduit for one 5 pin 5 Amp socket outlet point on same board with independent switch complete all as specified

All as per item No 130 here in before but wiring drawing through exisiting PVC Conduit for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 130 here in before but wiring drawing through exisiting PVC Conduit with 4 Sqmm cables for one 6 pin 15 Amp socket outlet point on independent board

S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F Supply and fixing switch modular 6 Amps 230 Volts one way switch complete all as specified and directed.

S&F Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and as directed

S&F Socket 6A/16 Amps-2/3 pin combined AC 230 Volts modular type complete all as specified and as directed.

S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified & as directed.

S&F moduler bell push 6 Amp one module one way complete all as specified.

S&F GI sunken box with flush metal GI box 1 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting to match the existing finishes complete all as directed.

All as per item no 140 here in above but 2 module.

All as per item no 140 here in above but 3 module.

All as per item no 140 hrer in above but 4 module.

All as per item no 140 here in above but 6 module.

All as per item no 140 here in above but 8 module.

All as per item no 140 here in above but 12 module.

S&F combind cover plate white 1 module suitable for modular switches complete all as specified and directed.

All as per item no 147 here in above but 2 module

All as per item no 147 here in above but 3 module

All as per item no 147 here in above but 4 module

All as per item no 147 here in above but 6 module

All as per item no 147 here in above but 8 module

All as per item no 147 here in above but 12 module.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm complete all as specified and directed

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC complete all as specified and directed

S&F lamp holder PVC/polycarbonate type with LED lamp 9/10 watt complete all as specified & directed

Fixing only bulk head/ tube light fitting of any description on wall/ceiling complete all as specified. Note - Old serviceable light fittings retrieved from taking down of point wiring shall be re-used.

S&F in replacement, wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 4000K/6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Wipro Cat part No LL20-281-XXX-65AL1/ Philips cat part No BN021C LED20S PSU CWGR S2/Havells Cat No ENDURA LINEARNEOBS20W LED865SPCWH.

S&F in replacement surface mounted LED 600x600mm fitting made of CRCA powder coated finish with high transmitivity difusser, LED used shall be profi LED & flat diffuser type and capacity 32 wattage or higher wattage, CCT upto 6500K, CRI > 80, PF > 0.95 or higher side including driver minimum internal surge protection 2.5 KV complete all as specrified & directed Make : Philips cat part No SM365C LED32-6500 PSU OD WH/Wipro CRCO10R038HP57GL / Havells PLUTONEO2X2PLR34WLED857S/CG LSTP-45-CDL.

S&F in replacement TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge, Make: Indoasian or eqvt in L&T/Schneider

S&F MCCB 3 Pole 125 Amp, 25KA thermel magnetic complete all as specified and directed by Engr-in-charge.

S & F in replacement sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

S & F sheet metal enclosure SPN for DB's when MCB's to be used 12 way with 200 amps bus bar and double doo rcomplete all as specified and directed.

All as per item no 163 here in above but DB' 8 way

All as per item no 163 here in above but DB 4 way

S&F in replacement metal clad single pole and neutral enclosure with 2 pin and earth plug and socket complete with and including one single pole MCB 20 Amp 240Volt complete all as specified.

S&F MCB SPN 240 Volt 10 KA 6 to 40 Amp 'C' series conforming to IS complete all as specified & directed.

S&F MCB SP(single pole) 240 volt, 10 KA, 6-40 Amp, 'C' series confirming to IS complete all as specified and directed.

M&L in replacement submain wiring with 3 runs (P+N+Earth continuity conductor) of 2.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade recommended colour code ,drawn through and including Surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting all wires with suitable size thimble complete all as specified and directed. Note:-3 runs of PVC copper cable, and one run of PVC conduit/case & caping shall be measured as one unit length.

All as per item No 169 here in above but sub main wiring drawn through PVC casing & caping

All as per item No 169 here in above but sub main wiring drawn through and including 20 mm dia or higher medium duty PVC concealed conduit with 4 Sqmm (nominal area) Cable

All as per item No 169 here in above but with 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit

All as per item No 169 here in above, but wiring drawing through PVC casing & caping with 3 runs of 4 Sq mm wire (P+N+Earth continuity conductor)

All as per item No 169 here in above, but submain wiring drawing through PVC casing & caping with 3 runs (P+N+Earth) of 6 Sq mm

S&F in replacement tamper proof electronic single phase with enclosure , whole currrent energy meter (LCD display) 10 Amp to 60 Amp, 240 volt class 1.00 and AC supply including cable connection, proper sealing with barcode with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box. The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old u/s meter will be deposited to E/M store yard)

S&F in replacement Meter Distribution Borard made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04 Nos incuding fixing concealed on wall, electrical connection with excisting system and sealing properly complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex or as per approved make.

M&L for earthing complete with galvanized iron or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.

S&F MCB TPN 63 Amps 10 kA, 430 Volt complete all as specified & directed by Engr-in-Charge.

Taking down ceiling fan, exhaust fan and dismantling blades, removing fan and blades to store, removing capacitor carefully for overhauling checking serviceability of bearings/bush, winding etc cleaning the fan reassembling after replacing the unserviceable parts such as capacitor, rubber bush, split pins, nut & bolts complete (To be paid under relevant item of the Sch 'A'), and testing the same, hanging ceiling fan connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge .

Fixing only repaired or new ceiling fan, exhaust fan of any sweep and connecting with flexible white 3 core PVC insulated copper multistranded conductor 23/0.0066 up to the ceiling rose complete all as specified and directed.

M&L for Rewinding of ceiling fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 1200 mm sweep.complete all as specified and directed.

All as per item No 181 here -in- above but of size 1400 mm sweep

M&L for Rewinding of Exhaust fan with same gauge as per existing gauge super enamalled copper wire including varnishing, drying paper insulation material complete of 300 mm sweep.complete all as specified and directed.

All as per item No 183 here and above but of size 380 mm sweep

S&Fin repair ball bearing No. 6201/6202 for 1200/1400mm ceiling fans as required at site complete all as specified and directed.

S&F in repair ball bearing No. 6203/6204 for 300/380/450mm exhaust fan as required at site complete all as specified and directed. .

S&F in repair GM bush for 1200/1400 mm sweep ceiling fan as required at site.complete all as specified and directed.

S&F in repair GM bush for 450/350/300/230mm sweep exhaust fan as required at site.complete all as specified and directed.

S&F in repair heavy duty rubber insulator for 1200/1400 mm sweep for hanging ceiling fan.complete all as specified and directed.

M&L for painting one coat for ceiling fans / exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

S&F in repair fan capacitor 2.5 mfd complete all as specified and directed.

S&F in repair fan capacitor 3.15 to 4 mfd complete all as specified and directed.

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI pipe of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as specified and directed.

S&F in repair white flexible wire three core 23/0.0066 with copper multistranded conductor PVC insulated complete all as specified and directed.

S&F in repair PVC canopy suitable for ceiling fan 1200/1400 mm as per requirement at site complete taking down and refixing upside all as specified and directed.

S&F in repair louvers shutters round or squire made out of GI sheet suitable upto 300 mm dia exhaust fan complete incl taking out old louvers shutter complete all as specified and directed.

All as per item No 196 here and above but louvers shutters suitable for 450 mm exhaust fan.

S&F in repair flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 60 watt or higher size LED , Glass cover complete all as specified and directed.

S&F gang box PVC for 5 Amps switch and socket complete all as specified and directed.

S&F gang box PVC for 15 Amps switch and socket complete all as specified and directed.

S&F PVC batten 20mm ISI marked complete all as specified and directed.

S&F PVC accessories i.e Junction, L Bend, Tee etc medium grade 20 MM dia complete all as specified and directed.

S&F saddle PVC nail type complete all as specified and directed.

S&F in replacement Bracket made out 32 mm GI pipe 90 CM long bend to shape and welded clamp including nuts,Bolts & washers complete all as specified and directed.

S&F fastner (Nut & Bolt) 75 mm long complete all as specified and directed.

S&F in replacement building security light luminaries with surge protector and photovoltaic/LDR sensor controlled made out of single piece die cast alluminium housing suitable for and including 1x30 Watt LED type complete, pre-wired complete all as specified Make Greenstar/Philips/Wipro/Havells

M&L for Servicing of geyser 25/50 ltr capacity in installed position (taking down from its original position on ground if required) opening up and taking out syphon assembly etc, removing deposited scales from syphon assembly, destoning complete inner tank, inspection against any leakages, serviceability of other parts and reassembling after replacement of unserviceable parts such as heating element, thermostat, indicating lamp, plug top, three core cable, rubber gasket, split plate, apparatus plate, NRV if required (Parts shall be measured and paid for separately under relevant item of the Sch) and installation of the geyser to its original position and connecting all electric and water supply connections complete all as directed.

S&F in replacement water heating element any type (Triangle/cup/box) as per site requirement of capacity upto 2 KW ISI Marked. Make:- Newton / Jaquar/ Bajaj.

S&F in replacement thermostat for geyser long type 11" in length as per site requirement temp setting on 60 degree centigrade ISI Marked, long type complete all as specified and directed. Make:- Newton / Jaquar/ Bajaj.

S&F in replacement thermostat for new version twin sensor short type with control box as per site requirement temp setting 0.75degree centigrade ISI Marked, complete all as specified and directed. Make:- Newton / Jaquar/ Bajaj.

S&F in replacement split plate for 25/35/50 ltrs capacity geyser as per site requirement and made out of 20 guage MS sheet duly painted complete all as specified and directed.

S&F in replacement geyser inner tank made out of stainless steel sheet conforming to relevant IS for 25 ltrs geyser as per existing model and make, complete all as specifeid and directed. Make:- Crompton/Racold/Venus/Havells/Jaquar

S&F in replacement syphon assembly with fusible plug, pressure release valve, vent pipe and rubber gasket etc for geyser any type of hole (6/7/9) all complete as per existing make & size as per site requirement all complete all as directed by Engr-in-Charge. Make:- Crompton/Bajaj/Racold/Jaquar.

S&F in replacement of water supply PVC flexible connection Nylon braided with suitable threaded check nut with washer complete suitable for hot and cold water 15mm dia alongwith threaded Brass nuts and washers 45 cm long complete all as specified and directed. Make:- Crompton/Havells/Prayag

S&F in replacement of unserviceable red/green indicating lamp for geysers

S&F clamps with nut bolt for fixing of geyser, as per existing size complete all as specified and directed.

S&F in replacement, Decorative Square/Round surface mounted LED flat panel PDC aluminium housing and PMPA diffuser makes it a robust Luminaire 12 Watts PF 0.9 and above operating voltage 150V-300V colour temp 4000K & lumen input, output 70 Lumen per watt incl provisioning of 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to light connector complete all as specified and directed by Engineer-in-charge

All as per item No 217 here-in-above but light fitting of 15 Watt complete all as specified.

VERDHMAN ASSOCIATES

IMPERIAL ENGINEERS

M/s Pradeep Kumar

ANANYA CONSTRUCTION CO.