PROVN OF INTERLOCKING TILES AT P-8/6 PROVN OF 300M CHAINLINK FENCE PROVN OF 2 TOILETS AT P-6/6 FAMILY WARD PROVN OF 2 TOILET AND BATHROOM AT P-6/6A TRAUMA CENTRE MI ROM AND CLINIC AT 161 MH AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil).

Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L RCC nominal mix type B1 1:2:4 (20 mm graded aggregate) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC nominal mix type B1 1:2:4 (20 mm graded aggregate) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L RCC nominal mix type B1 1:2:4 (20 mm graded aggregate) as in columns complete all as specified and as directed.

M&L RCC nominal mix type B1 1:2:4 (20 mm graded aggregate) as in Footings, plinth beams etc complete all as specified and as directed.

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat all as specified.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for fair finished surface of concrete

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, to be finished even and smooth (without using extra cement) complete.

M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished even and smooth (without using extra cement) complete.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete .

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in flooring complete all as specified and as directed.

S&F non-skid ceramic coloured tiles light shade 7 to 8mm thick area of each tile exceeding 0.06 Sqm but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed.

M&L providing factory made PVC internal door frame (PRELAM ) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm) made out of extruded 5 mm (+-).25 mm) thick PVC sheet manufactured by an ISO 9001-2008certified company and by joining 3 nos of heat bend PVC sheet section The inside section of size 90 x 30 mm shall be made from plain colour PVC sheet of 5 mm (+- o.25 mm) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25 mm) thick plain PVC sheet The frame shall be mitered cut at two corners and joined with 4 nos of 150 mm longbrackets of 15 mm x 15 mm MS square tube The two vertical door frame are tobe reinforced with 40 mm x 20mm MS square tube of 19 guage through out the frame the door shall be fixed to the wall using anchor fastners A minimum of 4 nos of screw to be provided for each vertical members and min 2 nos for horizontal members etc complete as per manufacturers specification and direction of engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of MS tube of 19 guage thickness and size 20 mm x 40 mm for stiles as well as top bottom and lock rail MS frame shall have a coat of primer of approved make and manufacturer The inside Panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm thick wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm ) thick plain / prelam PVC sheet manufactured by an ISO 9001-2008 certified company on both side of the inside panel ALl the four edged lipping to pe painted with PVC ink of matching colour of PLAIN/PRELAM moulded PVC sheet of door 0.20 mm thick (5 mm x 4 mm ) thick PVC sheet to be given for lock provision at lock height door to be fixed with frame with 3 nos SS butt hinges of size 100 mm x 25 mm x 25 mm and 50 mm long steel screw drilled suitable for to pass through both the wall of th MS tube other hardwares could be fixed with 25 mm x 8 mm size steel screw etc complete as per direction of engineer in cahrge manufacturer specification and drawings

S&F 150mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised all as specified

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge 100 mm pin, anodised and fixed, type C-21

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded complete all as specified.

S & F 3mm thick sheet glass ground or obscured or frosted, glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M&L three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

M&L for Preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls, complete all as specified and directed

M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete.

S&F 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F 15 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete.

Do - all as per above item but 20 mm bore.

S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S & F vitreous china hand wash basin white exclusive quality size 550 x 400 mm including brackets, PVC waste pipe, waste coupling and CP brass pillar taps, fixed complete all as specified.

S&F 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F 600x450 mm bevelled edge mirror of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between flanges complete all as specified and directed.

S&F viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, seat cover health fow jet (excluding flushing cistern and flushing pipe) all as specified

S&F vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed.

S&F PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete

S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified.

S&F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed

S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete

S&F 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball connections all as specified.

Demolition of cement concrete as in ground floor and paving n.exc 15cm thick below or above ground level complete all as specified & directed.

M & L for sand filling under floors or in foundation including watering and consolidation.

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block/CONCRETE COBBLE STONE any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade all as specified and directed.

Taking down cement or cement plaster, any description on bricks or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum,in soft/disintegrated rock and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified.

M & L for precast concrete Kerb Stones factory made of type B1, 1 : 2 : 4 (20mm graded stone aggregate) 10 to 15 cm thick and and setting in CM 1 : 6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed.

M&L for refixing of interlocking paver blocks with grey cement and pigment complete all as specified including dismantling of existing tiles all as specified and directed

M&L for prepearing of newly untreated surface then appying one caot of priming coat and two coat of plastic emulsion paint on Surfaces plain or moulded, exc 10cm width or girth when unconnected with other painting or when painted in adifferent tint all as spd and directed

Site Clearance in hard/ dense soil all as spd and diected

S&F MS Hand rails /Angle , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for Cement Concrete Type C-2, 1:3:6 (40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and as specified.

S&F chain link MS galvanised fencing square mesh of 100 mm size and dia of wire 3.4 mm including line wires, including provision of binding wire and Dismantling of fencing wire mesh complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck

M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165))) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips .

S&F heavy duty outdoor tiles 300x300mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

M&L for PCC 100 mm thick 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors etc, complete all as specified and directed.

S & F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, in skirting dado over and including 10 mm thick rendering in CM1:4 etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

S&F false ceiling with 4mm thick E-board 'Everest' make white prelaminated set embosed reinforced designer ceiling board of approved texture fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section, runner made of 0.33mm GI sheet and angle made of 0.45mm GI sheet suspended with 2mm dia stainless steel wire complete all as specified. Note:- All exposed surface of grid frame work shall be powder coated white.

S&F CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .

S & F vitreous china hand wash basin ( OVAL IN SHAPE) white exclusive quality, size 520 X 450 X 200 MM incl PVC waste pipe and waste coupling cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F 125 mm aluminium anodised barrel tower bolts of extruded section all as specified.

S& F 125 mm extruded aluminum alloy handles, fabricated type anodised.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S & F in repair 40mm dia light garde GI Pipe spout in wall, floors complete all as specified and directed.

M & L for cement concrete 1:7:12 Type F-2 using 40mm graded stone/brick aggregate as in foundation filling, mass concrete or sunkun etc complete all as specified and directed.

M & L for sunken treatment of of bath / toilet / WC etc by cleaning and removing all the loose mortar, laitance, dirt, dust etc by chisel hammer wire brush and fixing APP modified polymer membrane (weight not less than 3 kg/sqm) over a coat of bitumen not below 1.2 Kg per Sqm as primer over a coat of bitumen not below than 0.3Kg per Sqm over 15mm thick plaster in CM 1:3 with Dr fixit pidilite liquid water proofing solution 200ml per 50Kg of cement at both hozizontal and vertical surface complete all as specified and directed.

M & L for cement concrete padding of 1:2:4 using 12.5mm graded stone aggregates, 25mm thick in sunken of bath / toilet / WC/ roof slabs etc with adding water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Cost of WPC shall be deemed to inclusive in quoted unit rate.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and guard and railing 60cm long complete all as specified.

S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron) 2 mm thick incl 5.50mm thick frosted glass/ ACP sheet, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.

S&F curtain rod made of SS pipe dia of rod 25 mm with decorative brackets and ends complete all as specified and as directed.

S&f GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists etc in walls, ceilings, beams etc including all laps, cutting and waste complete all as specified and as directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

S&F 15mm bore fancy type bib taps (Two way ) brass chromium plated screwed down ,screwed for iron pipe or for brass ferrule including flench complete all as specified & directed .

S& F15mm bore fancy type angle cock (Two way ) brass chromium plated screwed down ,screwed for iron pipe or for brass ferrule including flench complete all as specified & directed .

S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

S&F SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

(b) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

(d)All as per item 154.01 herein above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, two way all as specified and directed.

S&F Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.

S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S & F white cover plate with frame modular type of 02 module complte all as specified and directed.

S & F white cover plate with frame modular type of 03 module complte all as specified and directed.

S & F white cover plate with frame modular type of 04 module complte all as specified and directed.

S & F white cover plate with frame modular type of 06 module complte all as specified and directed.

S & F metal flush box modular type of 02 module complte all as specified and directed.

S & F metal flush box modular type of 03 module complte all as specified and directed.

S & F metal flush box modular type of 04 module complte all as specified and directed.

S & F metal flush box modular type of 06 module complte all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F 10 W LED Lamp/bulb complete all as specified and directed.

S&F Sub main wiring with two single run of 4 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S&f PVC fresh air fan, single phase 23/240 V of size 250mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

S&f water heater storage type, electric capacity 25 litres BEE 5 star rated with grouting with four nuts and bolts complete with all accessories and chromium plated flexible two number pipe connection for hot/cold water supply.

m/s bahadur singh samant

M/s Rana Enterprises

shivam builders

M/S GD Punetha Son