CONSTRUCTION OF ADDITIONAL FLOOR FOR NEW COURT COMPLEX AT CHIKKODI, BELAGAVI DIST Under H/A 4059-80-051-0-32-386 For 2025-26

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Note: Minimum 50% of the required machinery should be owned by the Tenderer. Remaining 50% of the required machinery may be owned / procurred on Lease basis / Hire basis.

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

6 Items executed :

Earth work excavation :

UCR/SSM/B.B.M :

P.C.C / R.C.C :

Alluminium & Steel work (Doors, Windows & Partition) :

Address for correspondence:

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/ excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Year Name of work Name of Employer Quantity of work performed Remarks (Indicate contract reference)

2012-13 Exc & Embankment

Water Prrofing/Wall Panneling

2013-14 Exc & Embankment

Water Prrofing/Wall Panneling

2014-15 Exc & Embankment

Water Prrofing/Wall Panneling

2015-16 Exc & Embankment

Water Prrofing/Wall Panneling

2016-17 Exc & Embankment

Water Prrofing/Wall Panneling

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Financial Year Total value of works executed and payments received in the last five years (in Rs. lac)

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status

BANKER’S CERTIFICATE

This is to certify that M/s. ………………………….. is a reputed company with a good financial standing. If the contract for this work, namely ……………………………… (Name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs. …………… to meet the working capital requirements for executing the above contract

Name of the Bank, Senior Bank Manger

Address:…………………………

List of Machinery

Item of Equipment Requirement Owned/ Hired/Leased Owned/ Hired/Lease and available Remarks

No. Capacity Number/Capacity Age/ Condition

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs lac. Specified period of completion (including/excluding Monsoon Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs lac Specified period of completion (including/excluding Monsoon Probable Date of Handing over of site

Attach letters of Acceptance received.

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon cost of balance works remaining Rs. in lac Probable date of completion

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of Work Names of Employers 2018-19 Remarks (Indicate contract reference)

January February march April May June July August September October November December

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

Earthwork & Embankment in cum Physical

Base Course (WMM/WBM) in cum Physical

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) in cum Physical

Concrete in cum Physical

Steel in MT Physical

Others Specify Details Physical

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

has executed/ is executing(strike off which ever is not applicable) the work of .............................................

in this Organisation. The details of the work is as under:

1 Name of the Project :

2 Name of the Work :

3 Contract Amount :

4 Date of signing the Agreement :

5 Date of handing over of the Site :

Progress * : 2018-19

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2019-20

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2020-21

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2021-22

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

Progress * : 2022-23

January February March April May June July August September October November December

Earthwork & Embankment Physical in cum :

Financial in lac :

Base Course (WMM/WBM) Physical in cum :

Financial in lac :

Asphalt Quantities (MSS/BM/BC/SDBC/DBM) Physical in cum :

Financial in lac :

Others (Pl specify) Physical is cum/sqm :

Financial in lac :

Others (Pl specify) Physical :

Financial in lac :

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion

9 Actual Date of Completion/ Probable Date of Completion

10 Cost of balance work (if work is in progress) :

11 Reasons if any for delay in completion, if work completion is delayed :

12 Penalty if any imposed :

13 Any other information :

* Monthwise progress shall be furnished seperately.

Date: (Authorised Signatory)

Address for correspondence:

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of Markout /Date of Handing over of site Specified period of completion (including/excluding Monsoon Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs. lac)

Billed upto date during 2023-24

Attach Chartered Accountant's Yearwise Statements.

CONSTRUCTION OF ADDITIONAL FLOOR FOR NEW COURT COMPLEX AT CHIKKODI, BELAGAVI DIST

Sl no Items Unit Milestone -1 Quantity Milestone -2 Quantity Milestone -3 Quantity Total Quantity Rate in Rs. Amount for Mile Stone 1 in Rs Amount for Mile Stone 2 in Rs Amount for Mile Stone 3 in Rs Total Amount in Rs

Civil work Sl Item Unit Qty Rate Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. m³ 0 0 1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. m³ 17.56 1764.28 30980.756799999996

0 0 2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 130.85 12144.97 1589169.3244999999

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0 0 3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 224.57 11430.56 2566960.8592

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0 0 4 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 322.61 10716.15 3457137.1515

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 0 0 5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 14.86 10358.95 153933.997

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings t 0 0 6 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings t 96.49 85078.88 8209261.1312

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m³ 0 0 7 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m³ 14.13 2139.84 30235.939200000004

Integral Crystalline water proofing Admixture - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re- inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) m³ 0 0 8 Integral Crystalline water proofing Admixture - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re- inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) m³ 47.11 652.45 30736.9195

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 0 0 9 Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 671.02 8677.1 5822507.642

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m² 0 0 10 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m² 340.19 1119.25 380757.6575

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 0 0 11 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 1156.89 599.41 693451.4349

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 0 0 12 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 6833.28 178.23 1217895.4944

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of Glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float Glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) m² 0 0 13 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of Glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float Glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) m² 235.88 7144.1 1685150.308

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head Glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) m² 0 0 14 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head Glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) m² 47.11 6067.29 285830.0319

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m³ 0 0 15 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m³ 6.36 104832.83 666736.7988

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side Teak m² 0 0 16 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side Teak m² 132.93 4808 639127.4400000001

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No. 0 0 17 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No. 51 1076.81 54917.31

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 12 mm each 0 0 18 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 12 mm each 394 63.65 25078.1

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resist- ance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand- wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete - For Straight Portion m² 0 0 19 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resist- ance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand- wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete - For Straight Portion m² 28.4 4231.93 120186.812

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of the slab upto 0.50 m2 m² 0 0 20 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of the slab upto 0.50 m2 m² 277.68 4246.78 1179245.8704

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m² 0 0 21 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m² 871.42 3021.44 2632943.2448

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 0 0 22 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 2186.37 347.98 760813.0326

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m² 0 0 23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m² 110.36 938.9 103617.004

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m² 0 0 24 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m² 570.32 1534.06 874905.0992

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm m² 0 0 25 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm m² 1233.46 1406.75 1735169.855

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 26 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m² 3562.38 368.13 1311418.9494

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. m² 0 0 27 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. m² 2845.33 372.38 1059543.9854

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 0 0 28 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 1332.24 55.17 73499.6808

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 29 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m² 570.32 339.49 193617.93680000002

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide m 0 0 30 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide m 3029.62 46.68 141422.6616

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 31 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 2845.33 184.6 525247.918

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m² 0 0 32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m² 5495.22 106.09 582987.8898

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 33 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 5495.2 134.73 740368.296

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 34 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 282.99 53.04 15009.7896

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 35 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 282.99 122 34524.78

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 36 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 346.39 56.23 19477.5097

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 0 0 37 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 346.39 146.4 50711.496

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa- terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m² 0 0 38 polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa- terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m² 2177 866.76 1886936.52

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm No 0 0 39 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm No 51 397.84 20289.84

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No. 0 0 40 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No. 51 1116.07 56919.57

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length No 0 0 41 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length No 114 1591.35 181413.9

Extra for providing throating or drip moulding toR.C.C. chajja with plastering (labour charges only) as per specifications. Specification No. KBS Rmtr 0 0 42 Extra for providing throating or drip moulding toR.C.C. chajja with plastering (labour charges only) as per specifications. Specification No. KBS Rmtr 195.5 35.01 6844.455

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm Sqm 0 0 43 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm Sqm 1233.45 221.73 273492.8685

Providing Elevation cornice of 350mm DEPTH including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. m 0 0 44 Providing Elevation cornice of 350mm DEPTH including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. m 127 13000 1651000

Providing Elevation facade of 0.95mtr x 0.70 mtr including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. No 0 0 45 Providing Elevation facade of 0.95mtr x 0.70 mtr including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. No 80 12800 1024000

Providing, supplying, fixing of DOOR catchers to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. No 0 0 46 Providing, supplying, fixing of DOOR catchers to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. No 50 515 25750

Providing, supplying, fixing of 5" S.S. Hinges to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 0 0 47 Providing, supplying, fixing of 5" S.S. Hinges to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 221 455 100555

Providing, supplying, fixing of 10" S.S. Tower Bolt to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 0 0 48 Providing, supplying, fixing of 10" S.S. Tower Bolt to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 63 875 55125

Providing, supplying, of Locking Arrangenents to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work Nos 0 0 49 Providing, supplying, of Locking Arrangenents to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work Nos 44 650 28600

Providing and fixing polymeric Expansion joint with 22mm thick polymeric Expansion joint filler with all the necessary material, Transportation charges etc., complete as per relevant IS Standerd and the direction of engineer charge. Sqm 0 0 50 Providing and fixing polymeric Expansion joint with 22mm thick polymeric Expansion joint filler with all the necessary material, Transportation charges etc., complete as per relevant IS Standerd and the direction of engineer charge. Sqm 31.87 2228 71006.36

Providing and filling expansion joint in columns and slab with FOSROC THIO FLEX -600 Gun Grade including primer 7 and covering the expansion joint with alluminium sheet (100mm wide x 5mm thick ) by screwing to conctrete surface one side fixed and another side ablong hole. The rate includes for all the materials,labours, scaffolding, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. m 0 0 51 Providing and filling expansion joint in columns and slab with FOSROC THIO FLEX -600 Gun Grade including primer 7 and covering the expansion joint with alluminium sheet (100mm wide x 5mm thick ) by screwing to conctrete surface one side fixed and another side ablong hole. The rate includes for all the materials,labours, scaffolding, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. m 162.5 2050 333125

Providing and Fixing new Stainless steel boards of thickness 22 guage (0.644mm) For Minister rooms, Secretary cublicles rooms, of various sizes, the letters of the boards are printed with stickering process in Black colour as per direction of Engineer-in-charge (including cost of materials, labour, transportation, loading, unloading charges) at Suvarna soudha belagavi. (18"X8") No 0 0 52 Providing and Fixing new Stainless steel boards of thickness 22 guage (0.644mm) For Minister rooms, Secretary cublicles rooms, of various sizes, the letters of the boards are printed with stickering process in Black colour as per direction of Engineer-in-charge (including cost of materials, labour, transportation, loading, unloading charges) at Suvarna soudha belagavi. (18"X8") No 108 2900 313200

Providing and Fixing new Titanium boards of ministers, Legislative Council/Assembly, Corridors/Lounges, Titanium plate of thickness 22 Guage (0.644mm), on that Gold glossy finished Titanium letters are embedded by permanent itching process, boards are painted by Red/Green colour venyl paint in two coats, as per direction of Engineer-in-charge (including cost of material, labour, transportation, loading, unloading charges) at Suvarna soudha Belagavi. (48"X16") No 0 0 53 Providing and Fixing new Titanium boards of ministers, Legislative Council/Assembly, Corridors/Lounges, Titanium plate of thickness 22 Guage (0.644mm), on that Gold glossy finished Titanium letters are embedded by permanent itching process, boards are painted by Red/Green colour venyl paint in two coats, as per direction of Engineer-in-charge (including cost of material, labour, transportation, loading, unloading charges) at Suvarna soudha Belagavi. (48"X16") No 2 18000 36000

SLAB CONCEALED CONDUTE SYSTEM Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalorPVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 119or20 mm dia 2 mm thick Per Mtr 0 0 1 SLAB CONCEALED CONDUTE SYSTEM Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalorPVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 119or20 mm dia 2 mm thick Per Mtr 2500 66 165000

0 0 2 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalorPVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick Per Mtr 2300 78 179400

WALL GROOVE CUTTING FOR CONDUTE SYSTEM Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19or20 mm dia 2 mm thick Per Mtr 0 0 3 WALL GROOVE CUTTING FOR CONDUTE SYSTEM Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19or20 mm dia 2 mm thick Per Mtr 2600 68 176800

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Per Mtr 0 0 4 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Per Mtr 3400 79 268600

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cableorconduit entry asrequired with one coat of primer of approved make etc. 135 x 75 x 65 mm Each 0 0 5 Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cableorconduit entry asrequired with one coat of primer of approved make etc. 135 x 75 x 65 mm Each 6 139 834

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cableorconduit entry asrequired with one coat of primer of approved make etc.180 x 90 x 65 mm Each 0 0 6 Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cableorconduit entry asrequired with one coat of primer of approved make etc.180 x 90 x 65 mm Each 4 161 644

WALL JUNCTION BOX METALor PVC Supplying and fixing PVCormetal conduit Deep junction box 19or20 mm deep Junction box Each 0 0 7 WALL JUNCTION BOX METALor PVC Supplying and fixing PVCormetal conduit Deep junction box 19or20 mm deep Junction box Each 100 49 4900

Supplying and fixing PVCormetal conduit Deep junction box 25 mm deep Junction box Each 0 0 8 Supplying and fixing PVCormetal conduit Deep junction box 25 mm deep Junction box Each 80 56 4480

Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete. 10" x 7" x 3" (254 x 178 x 76 mm) Each 0 0 9 Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete. 10" x 7" x 3" (254 x 178 x 76 mm) Each 4 112 448

Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete. 8" x 6" x 3" (203 x 152 x 76 mm) Each 0 0 10 Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete. 8" x 6" x 3" (203 x 152 x 76 mm) Each 6 86 516

FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 20mm Mtr 0 0 11 FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 20mm Mtr 80 19 1520

FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25mm Mtr 0 0 12 FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25mm Mtr 60 22 1320

FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 32mm Mtr 0 0 13 FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 32mm Mtr 40 29 1160

FAN METALor PVC BOX Supplying And Fixing Metal Fan Box with Round Hook. No 0 0 14 FAN METALor PVC BOX Supplying And Fixing Metal Fan Box with Round Hook. No 115 117 13455

MODULAR SWITCH METAL BOX Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 1-3 Way Each 0 0 15 MODULAR SWITCH METAL BOX Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 1-3 Way Each 90 138 12420

Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 4-5 Way Each 0 0 16 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 4-5 Way Each 30 177 5310

Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 6 Way Each 0 0 17 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 6 Way Each 40 220 8800

Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 8 Way Each 0 0 18 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 8 Way Each 85 261 22185

Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 10-12 Way Each 0 0 19 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 10-12 Way Each 55 319 17545

Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 16-18 Way Each 0 0 20 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 16-18 Way Each 15 405 6075

MODULAR SWITCH MOUNTING PLATES Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 1 to 3 Module Each 0 0 21 MODULAR SWITCH MOUNTING PLATES Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 1 to 3 Module Each 90 137 12330

Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 4 Module Each 0 0 22 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 4 Module Each 30 161 4830

Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 6 Module Each 0 0 23 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 6 Module Each 40 234 9360

Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 8 Module Each 0 0 24 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 8 Module Each 85 284 24140

Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 10-12 Module Each 0 0 25 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 10-12 Module Each 55 344 18920

Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 16-18 Module Each 0 0 26 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 16-18 Module Each 15 457 6855

MODULAR SWITCHES & SOCKETS Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 0 0 27 MODULAR SWITCHES & SOCKETS Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 630 102 64260

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 0 0 28 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 6 166 996

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 0 0 29 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 290 171 49590

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 0 0 30 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 115 357 41055

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 0 0 31 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 55 180 9900

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 0 0 32 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 12 177 2124

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 0 0 33 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 8 326 2608

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6or16A Universal Socket Each 0 0 34 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6or16A Universal Socket Each 55 236 12980

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. TVorTelephone Socket Each 0 0 35 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. TVorTelephone Socket Each 18 156 2808

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293.RJ45orI.O Outlet Cat-6 Each 0 0 36 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293.RJ45orI.O Outlet Cat-6 Each 80 337 26960

Supplying and fixing one of 230 V Ding dong bell and a flushtype bell push with gang box fixed on necessary wooden or rawlplugs using NF screws with Remote. Remote No 0 0 37 Supplying and fixing one of 230 V Ding dong bell and a flushtype bell push with gang box fixed on necessary wooden or rawlplugs using NF screws with Remote. Remote No 12 1190 14280

PBBCorBATTENor ANGLE HOLDERS 6A Lamp Holder No 0 0 38 PBBCorBATTENor ANGLE HOLDERS 6A Lamp Holder No 250 71 17750

Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 0 0 39 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 4 4038 16152

Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door 4 Way SP & N Each 0 0 40 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door 4 Way SP & N Each 4 1524 6096

Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP & N Each 0 0 41 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP & N Each 8 1854 14832

Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP & N Each 0 0 42 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP & N Each 4 2329 9316

Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 0 0 43 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 6 4038 24228

POINT WIRING Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch box Each Point 0 0 44 POINT WIRING Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch box Each Point 35 269 9415

Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Medium point above 3m upto 6m from tapping point to out letvia switch box Each Point 0 0 45 Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Medium point above 3m upto 6m from tapping point to out letvia switch box Each Point 210 379 79590

Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box Each Point 0 0 46 Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box Each Point 180 555 99900

Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Two outlet in a row, above 3m upto 6m from tapping point to out let via switches Each Point 0 0 47 Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Two outlet in a row, above 3m upto 6m from tapping point to out let via switches Each Point 20 677 13540

Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc, and fixing on existingwooden or metal box using N.F. screws Sq CM 0 0 48 Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc, and fixing on existingwooden or metal box using N.F. screws Sq CM 1800 0.41 738

LIGHTING & POWER CIRCUTE CABLES Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5 mm2 m 0 0 49 LIGHTING & POWER CIRCUTE CABLES Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5 mm2 m 2800 26 72800

Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 2.5 mm2 m 0 0 50 Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 2.5 mm2 m 4900 42 205800

Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 4 mm2 m 0 0 51 Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 4 mm2 m 3100 63 195300

Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 6 mm2 m 0 0 52 Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 6 mm2 m 2100 92 193200

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws. 80 mm No 0 0 53 Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws. 80 mm No 60 15 900

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws. 110 mm No 0 0 54 Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws. 110 mm No 50 21 1050

MCB'S Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A SP Each 0 0 55 MCB'S Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A SP Each 140 415 58100

Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A DP Each 0 0 56 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A DP Each 32 739 23648

Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 50-63 A DP Each 0 0 57 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 50-63 A DP Each 20 1102 22040

Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A TPN Each 0 0 58 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A TPN Each 6 1717 10302

Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 50-63 A TPN Each 0 0 59 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 50-63 A TPN Each 10 3088 30880

Supplying and drawing PVC insulated gas injected physicalfoam jelly flooded co-axial TV cable.RG-6. Mtr 0 0 60 Supplying and drawing PVC insulated gas injected physicalfoam jelly flooded co-axial TV cable.RG-6. Mtr 100 44 4400

Supply and fixing polished wood board made of not lessthan 15mm thick plank on both sides of not more than 2pieces and fixing the same to the wall using tapered invertedwooden plugs screws. 20" x 20" x 2.5" Each 0 0 61 Supply and fixing polished wood board made of not lessthan 15mm thick plank on both sides of not more than 2pieces and fixing the same to the wall using tapered invertedwooden plugs screws. 20" x 20" x 2.5" Each 4 326.13 1304.52

Fixing of ..... A TPST or change over switch or Contactor alongwith neutral link with screws, bolts, nuts and wiring usingrequired capacity wires and circuit labelling. 100A to 250A TPST Each 0 0 62 Fixing of ..... A TPST or change over switch or Contactor alongwith neutral link with screws, bolts, nuts and wiring usingrequired capacity wires and circuit labelling. 100A to 250A TPST Each 1 447 447

PANEL BOARD Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240or450V upto 300mA sensitivity on existing woodor panel board.. 32-40 A 4 pole Each 0 0 63 PANEL BOARD Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240or450V upto 300mA sensitivity on existing woodor panel board.. 32-40 A 4 pole Each 2 5147 10294

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism FOUR POLE 200 A 36 kA Each 0 0 64 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism FOUR POLE 200 A 36 kA Each 2 21424 42848

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism FOUR POLE 250 A 36 kA Each 0 0 65 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism FOUR POLE 250 A 36 kA Each 1 23545 23545

0 0 66 Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240or450V upto 300mA sensitivity on existingwoodorpanel board. 16-25 A 2 pole Each 2 4277 8554

Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240or450V upto 300mA sensitivity on existingwoodorpanel board. 32-40 A 2 pole Each 0 0 67 Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240or450V upto 300mA sensitivity on existingwoodorpanel board. 32-40 A 2 pole Each 2 4559 9118

Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips Rmtr 0 0 68 Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips Rmtr 6 2465 14790

Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips Rmtr 0 0 69 Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips Rmtr 4 3435 13740

Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips Rmtr 0 0 70 Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips Rmtr 2 4445 8890

Fabricating supplying and mounting MS box made out....SWG suitable for floor orwall mounting, fully weather proofwith provision for better heat dissipation, provided withhinged front cover, equipped with tamper proof lockingarrangements, with suitable size clA with necessary cableentry pipe with gland and box should be finished with7tanks treatment with powder coated paint and finally finishedwith approved colour etc., complete. 16 SWG Sq CM 0 0 71 Fabricating supplying and mounting MS box made out....SWG suitable for floor orwall mounting, fully weather proofwith provision for better heat dissipation, provided withhinged front cover, equipped with tamper proof lockingarrangements, with suitable size clA with necessary cableentry pipe with gland and box should be finished with7tanks treatment with powder coated paint and finally finishedwith approved colour etc., complete. 16 SWG Sq CM 310000 0.43 133300

Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint. 50 x 50 x 6 mm Rmtr 0 0 72 Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint. 50 x 50 x 6 mm Rmtr 8 395 3160

Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint. 50 x 100 x 50 x 6 mm C channel Rmtr 0 0 73 Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint. 50 x 100 x 50 x 6 mm C channel Rmtr 4 756 3024

Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50 HzAC with latest microcontroller based, digital readout ofpercentage leakage current, programmable delayorautoormanual reset facility suitable to mount on DIN railor flushmounting on panel board. Each 0 0 74 Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50 HzAC with latest microcontroller based, digital readout ofpercentage leakage current, programmable delayorautoormanual reset facility suitable to mount on DIN railor flushmounting on panel board. Each 2 9255 18510

Supplying, fixing and wiring rotary selector switch suitablefor Ammeter Each 0 0 75 Supplying, fixing and wiring rotary selector switch suitablefor Ammeter Each 2 200 400

Supplying, fixing and wiring rotary selector switch suitablefor Voltmeter Each 0 0 76 Supplying, fixing and wiring rotary selector switch suitablefor Voltmeter Each 2 160 320

Supplying, fixing and wiring 3 Phase Digital Ammeter orVoltmeter Each 0 0 77 Supplying, fixing and wiring 3 Phase Digital Ammeter orVoltmeter Each 2 1425 2850

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230or440VAC. 50 Hz 12or24V D.C. Each 0 0 78 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230or440VAC. 50 Hz 12or24V D.C. Each 6 515 3090

Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 to 70 A Each 0 0 79 Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 to 70 A Each 2 5950 11900

Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting. Each 0 0 80 Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting. Each 2 2315 4630

LED LIGHT FITTINGS Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70percent lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50or60Hz & Power factor greater than0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 20or22 W Each 0 0 81 LED LIGHT FITTINGS Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70percent lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50or60Hz & Power factor greater than0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 20or22 W Each 150 690 103500

Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70percent lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50or60Hz & Power factor greater than0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 36or40 W Each 0 0 82 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70percent lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50or60Hz & Power factor greater than0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 36or40 W Each 110 1269 139590

Supplying of recess mounting non integrated type LEDdown light...... W luminaire comprising of pressure decastorextruded aluminium housing, with spring loaded false ceilingclA, LED of PowerorCOB with CCT 6500 degree K, CRIgreater than70percent. efficacy greater than100 lumen per W, 120degree beam spread,lifegreater than 25000 burning hours and Compliance to IS10322orIEC60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF greater than 0.95, power lossshouldLess than 5percent of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20percent,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABLorCPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standardelectrical condition. 15-18W Nos 0 0 83 Supplying of recess mounting non integrated type LEDdown light...... W luminaire comprising of pressure decastorextruded aluminium housing, with spring loaded false ceilingclA, LED of PowerorCOB with CCT 6500 degree K, CRIgreater than70percent. efficacy greater than100 lumen per W, 120degree beam spread,lifegreater than 25000 burning hours and Compliance to IS10322orIEC60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF greater than 0.95, power lossshouldLess than 5percent of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20percent,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABLorCPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standardelectrical condition. 15-18W Nos 4 1671 6684

LED modular down light 2'x2' or1'x4' 34-36 W Nos 0 0 84 LED modular down light 2'x2' or1'x4' 34-36 W Nos 20 4553 91060

LED modular down light 2'x2' or1'x4'42-55 W Nos 0 0 85 LED modular down light 2'x2' or1'x4'42-55 W Nos 18 4861 87498

Supplying of Ceiling Fan with Capacitor rating As perguideline of BEE 5 star rating and IS:374or79 and alsoCEILING FAN or EXHAUST FAN comply with IS: 1709or1984 with latest amendment, Ratedvoltage 220 Vor50 Hz, Rated power input 48 W +or- 10 percent,Rated current As per IS:374or79, Rated power factor 0.9lagging(min), Rated speed 350 +or- 10percent RPM, Rated airdelivery 210 +or- 10percent Cubic Meter Minimum, Rated servicevalue 4.2 CMM or W, Three Blades of blade leaf 1.05 mm thickAluminium Alloy sheet, Class B motor insulation, Bearing Twoball bearings, Top 6202, Bottom 6201, as per IS specification,Motor winding. Temp rise Shall not exceed 75 deg C over andambient of 40 0C by resistance method at 245 V, Insulationresistance Shall not be less than Two Mega Ohms (2M Ohms),Leakage current Should not exceed 210 Micro Amp, Powerinput, W& current, Air Delivery & Fan Speed as perIS:374or1979 with latest amendment, 2 year manufacturerWarranty. 48" Sweep 5 Star (1200 mm) Each 0 0 86 Supplying of Ceiling Fan with Capacitor rating As perguideline of BEE 5 star rating and IS:374or79 and alsoCEILING FAN or EXHAUST FAN comply with IS: 1709or1984 with latest amendment, Ratedvoltage 220 Vor50 Hz, Rated power input 48 W +or- 10 percent,Rated current As per IS:374or79, Rated power factor 0.9lagging(min), Rated speed 350 +or- 10percent RPM, Rated airdelivery 210 +or- 10percent Cubic Meter Minimum, Rated servicevalue 4.2 CMM or W, Three Blades of blade leaf 1.05 mm thickAluminium Alloy sheet, Class B motor insulation, Bearing Twoball bearings, Top 6202, Bottom 6201, as per IS specification,Motor winding. Temp rise Shall not exceed 75 deg C over andambient of 40 0C by resistance method at 245 V, Insulationresistance Shall not be less than Two Mega Ohms (2M Ohms),Leakage current Should not exceed 210 Micro Amp, Powerinput, W& current, Air Delivery & Fan Speed as perIS:374or1979 with latest amendment, 2 year manufacturerWarranty. 48" Sweep 5 Star (1200 mm) Each 115 2677 307855

Extra length of GI pipe of class B 19mm dia for down rod. Each 0 0 87 Extra length of GI pipe of class B 19mm dia for down rod. Each 115 197 22655

Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) Each 0 0 88 Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) Each 20 4446 88920

GEASERS Supplying.....litres capacity verticalorhorizontal type wallmounting Electrical water heater with 22 SWG copperorSS sheetmetal inner Container tinned inside and anticorrosive paintoutside and 20 SWG M.S. sheet metal outer cover filled withglass wool between inner and outer container for thermalinsulation complete. The inlet and outlet pipes so arranged thatwater flow inside results in water to flow out from the innercontainer without turbulence. The Inner container shall havedirect immersion type copper tube nickel plate. 2kW capacityelement with a neon indicator fitted with 20A capacity 25 to 85degree Centigrade range thermostat. The water heater shallcompletely be wired with 40or0.0076 inch 3 core copper flexiblewire of 1.5 meters length and the outer container provided withheavy gauge brackets for wall mounting. 25 L Each 0 0 89 GEASERS Supplying.....litres capacity verticalorhorizontal type wallmounting Electrical water heater with 22 SWG copperorSS sheetmetal inner Container tinned inside and anticorrosive paintoutside and 20 SWG M.S. sheet metal outer cover filled withglass wool between inner and outer container for thermalinsulation complete. The inlet and outlet pipes so arranged thatwater flow inside results in water to flow out from the innercontainer without turbulence. The Inner container shall havedirect immersion type copper tube nickel plate. 2kW capacityelement with a neon indicator fitted with 20A capacity 25 to 85degree Centigrade range thermostat. The water heater shallcompletely be wired with 40or0.0076 inch 3 core copper flexiblewire of 1.5 meters length and the outer container provided withheavy gauge brackets for wall mounting. 25 L Each 2 10242 20484

FIXING CHARGES Fixing all types and all capacities of fluorescent orfalse ceiling orspot light or CFL or LED fittings indoor on the wallor ceiling orrafters or girders using 23or0.0076" twin twisted PVC insulatedwires, required Nos of round blocks and clA. On wallor ceiling or Rafter or Girders Nos 0 0 90 FIXING CHARGES Fixing all types and all capacities of fluorescent orfalse ceiling orspot light or CFL or LED fittings indoor on the wallor ceiling orrafters or girders using 23or0.0076" twin twisted PVC insulatedwires, required Nos of round blocks and clA. On wallor ceiling or Rafter or Girders Nos 260 122 31720

Fixing all types and all capacities of 1'x4' or 2'x2' LED Lightfittings indoor on the wall or ceiling or rafters or girders withnecessary supporting frame, using 2310.0076" twin twistedPVC insulated wires, required Nos of round blocks and clA. LED modular down light 2'x2'-36 watts or2'x2'-55 watts Nos 0 0 91 Fixing all types and all capacities of 1'x4' or 2'x2' LED Lightfittings indoor on the wall or ceiling or rafters or girders withnecessary supporting frame, using 2310.0076" twin twistedPVC insulated wires, required Nos of round blocks and clA. LED modular down light 2'x2'-36 watts or2'x2'-55 watts Nos 38 490 18620

Fixing a ceiling or Wall mounting fan of all capacities and alltypes to the existing 'S'' hook with fan regulator to the existingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 or 0.0076 inch PVC insulated twintwisted copper wire and wiring. Each 0 0 92 Fixing a ceiling or Wall mounting fan of all capacities and alltypes to the existing 'S'' hook with fan regulator to the existingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 or 0.0076 inch PVC insulated twintwisted copper wire and wiring. Each 115 171 19665

Fixing one exhaust fan in the nitch already left in the wall withbolts and nuts and 5 A. ceiling rose with sufficient length of23or0.0076 inch PVC insulated twin core wire. Each 0 0 93 Fixing one exhaust fan in the nitch already left in the wall withbolts and nuts and 5 A. ceiling rose with sufficient length of23or0.0076 inch PVC insulated twin core wire. Each 20 492 9840

Erection charges for fixing a ... litres capacity wall mountingelectric geysers using bolts, flat at one end nut and washers atthe other end for through bolts and nuts and washers with150x450x600mm back plate and wiring complete with 15A 3pin top. UPTO 30LITERS Each 0 0 94 Erection charges for fixing a ... litres capacity wall mountingelectric geysers using bolts, flat at one end nut and washers atthe other end for through bolts and nuts and washers with150x450x600mm back plate and wiring complete with 15A 3pin top. UPTO 30LITERS Each 2 664 1328

AC'S Supplying ......TR split Air conditioners suitable for operationon AorC supply single phase 50 Hz 230 V with hermeticallysealed compressor with air cooled condenser, motor capacitorand start run capacitors, relay and over load protector internalunit, with one indoor and one outdoor unit The condenser unitwill be placed outside the room on the terrace to avoid noiseincluding standard length of suitable size copper tubingcovered with insulation tube. (High wall chordedorcordless)suitable capacity 3 core sheathedor PVC copper cable and abattery operated wireless remote unit 1.5 Ton capacity Each 0 0 95 AC'S Supplying ......TR split Air conditioners suitable for operationon AorC supply single phase 50 Hz 230 V with hermeticallysealed compressor with air cooled condenser, motor capacitorand start run capacitors, relay and over load protector internalunit, with one indoor and one outdoor unit The condenser unitwill be placed outside the room on the terrace to avoid noiseincluding standard length of suitable size copper tubingcovered with insulation tube. (High wall chordedorcordless)suitable capacity 3 core sheathedor PVC copper cable and abattery operated wireless remote unit 1.5 Ton capacity Each 2 47863 95726

AC'S Supplying ......TR split Air conditioners suitable for operationon AorC supply single phase 50 Hz 230 V with hermeticallysealed compressor with air cooled condenser, motor capacitorand start run capacitors, relay and over load protector internalunit, with one indoor and one outdoor unit The condenser unitwill be placed outside the room on the terrace to avoid noiseincluding standard length of suitable size copper tubingcovered with insulation tube. (High wall chordedorcordless)suitable capacity 3 core sheathedor PVC copper cable and abattery operated wireless remote unit 1.5 Ton capacity 2 Ton capacity Each 0 0 96 AC'S Supplying ......TR split Air conditioners suitable for operationon AorC supply single phase 50 Hz 230 V with hermeticallysealed compressor with air cooled condenser, motor capacitorand start run capacitors, relay and over load protector internalunit, with one indoor and one outdoor unit The condenser unitwill be placed outside the room on the terrace to avoid noiseincluding standard length of suitable size copper tubingcovered with insulation tube. (High wall chordedorcordless)suitable capacity 3 core sheathedor PVC copper cable and abattery operated wireless remote unit 1.5 Ton capacity 2 Ton capacity Each 3 54048 162144

Installation charges for split type air conditioner with alliedworks for one indoor and one outdoor unit is to be mounted onsuitable Angle Iron support upto 3.0 Ton splitorcassette typeAorC. Each 0 0 97 Installation charges for split type air conditioner with alliedworks for one indoor and one outdoor unit is to be mounted onsuitable Angle Iron support upto 3.0 Ton splitorcassette typeAorC. Each 5 3175 15875

Supplying and installation of insulated refrigerant copper tubing of 5or8" and 3or8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional pipinglength of tube. Split Mtr 0 0 98 Supplying and installation of insulated refrigerant copper tubing of 5or8" and 3or8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional pipinglength of tube. Split Mtr 100 1549 154900

Extra for Fabrication supply and fixing of Stand fabricatedusing slotted angle orL angle of size 6mm x 50mm for mountingout doororindoor A.C. unitor Batteries Each 0 0 99 Extra for Fabrication supply and fixing of Stand fabricatedusing slotted angle orL angle of size 6mm x 50mm for mountingout doororindoor A.C. unitor Batteries Each 5 4807 24035

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 4kVA Capacity Each 0 0 100 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 4kVA Capacity Each 2 4792 9584

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 5kVA Capacity Each 0 0 101 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 5kVA Capacity Each 3 9666 28998

LTorUG CABLE 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm) Km 0 0 102 LTorUG CABLE 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm) Km 0.13 154062 20028.06

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 0 0 103 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 0.11 178973 19687.03

LTorUG CABLE LABOUR CHARGES Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm Mtr 0 0 104 LTorUG CABLE LABOUR CHARGES Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm Mtr 0.24 31139 7473.36

CABLE GLANDS Brass Cable Gland - 32 mm Each 0 0 105 CABLE GLANDS Brass Cable Gland - 32 mm Each 20 95 1900

Brass Cable Gland - 45 mm Each 0 0 106 Brass Cable Gland - 45 mm Each 32 197 6304

CASING CAP'S Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. - 25 mm Mtr 0 0 107 CASING CAP'S Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. - 25 mm Mtr 150 35 5250

Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. - 30mm Mtr 0 0 108 Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. - 30mm Mtr 180 43 7740

Supplying and running GIorCopper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttasorspacers etc., - I) GI Wire b) 10 SWG including cost and conveyance of all materials, labour, HOM of equipments, all lead and lift and all other incidental charges etc., complete as per standard technical specifications and as directed by the Engineer-in-charge of the work. Mtr 0 0 109 Supplying and running GIorCopper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttasorspacers etc., - I) GI Wire b) 10 SWG including cost and conveyance of all materials, labour, HOM of equipments, all lead and lift and all other incidental charges etc., complete as per standard technical specifications and as directed by the Engineer-in-charge of the work. Mtr 210 15 3150

Fire Extinguisher Providing 6.5 kg C02 Gas val ve type Fire Extinugisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 30.5 kg empty Weight 24.0 kg Can Height 1015 mm Diameter 140 mm, Discharge Time less than 13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 348, Can Construction : Hot spinningorForging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5 mm lSI Approved, 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 0 0 110 Fire Extinguisher Providing 6.5 kg C02 Gas val ve type Fire Extinugisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 30.5 kg empty Weight 24.0 kg Can Height 1015 mm Diameter 140 mm, Discharge Time less than 13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 348, Can Construction : Hot spinningorForging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5 mm lSI Approved, 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 2 9500 19000

Providing 4.5 kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2Easy Weight Management used Unused Mechanism, Squeeze Grip,Gross Weight 19.1 kg empty Weight 14.6 kg Can Height 860 mmDiameter 140 mm, Discharge Time less than13 Sees, Controllabledischarge mechanism, Applicable on Class 8&C Fire, 8 Rating 138,Can Construction : Hot spinningorForging, Valve Construction : Forging& Machining, Internal Coating of Can : Not Applicable, External coatingof Can : Spray Painting, Sheet metal thickness : 4.5 mm lSI Approved,1Year Warranty. with instalert system with Superior quality EPDM RubberHosepipe etc., including cost of materials, labour, usage chargesof machinery complete as per specifications. complete Each 0 0 111 Providing 4.5 kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2Easy Weight Management used Unused Mechanism, Squeeze Grip,Gross Weight 19.1 kg empty Weight 14.6 kg Can Height 860 mmDiameter 140 mm, Discharge Time less than13 Sees, Controllabledischarge mechanism, Applicable on Class 8&C Fire, 8 Rating 138,Can Construction : Hot spinningorForging, Valve Construction : Forging& Machining, Internal Coating of Can : Not Applicable, External coatingof Can : Spray Painting, Sheet metal thickness : 4.5 mm lSI Approved,1Year Warranty. with instalert system with Superior quality EPDM RubberHosepipe etc., including cost of materials, labour, usage chargesof machinery complete as per specifications. complete Each 2 8500 17000

Supplying of Four Bucket stands along with Buckets including cost and conveyance of all materials, labour, HOM of equipments, all lead and lift and all other incidental charges etc., complete as per standard technical specifications and as directed by the Engineer-in-charge of the work.(andexornewageorminimax) Each 0 0 112 Supplying of Four Bucket stands along with Buckets including cost and conveyance of all materials, labour, HOM of equipments, all lead and lift and all other incidental charges etc., complete as per standard technical specifications and as directed by the Engineer-in-charge of the work.(andexornewageorminimax) Each 1 1850 1850

LAN CABLES (CAT-6) or TELEPHONE CABLES Supplying and drawing UTP-CAT 6E LAN cable. Mtr 0 0 113 LAN CABLES (CAT-6) or TELEPHONE CABLES Supplying and drawing UTP-CAT 6E LAN cable. Mtr 4800 38 182400

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair Mtr 0 0 114 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair Mtr 500 21 10500

NETWORK RACKS Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 6U with 450mm depth Each 0 0 115 NETWORK RACKS Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 6U with 450mm depth Each 2 6977 13954

NETWORK RACKS Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 12U with 450mm depth Each 0 0 116 NETWORK RACKS Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 12U with 450mm depth Each 1 8835 8835

Supplying fixing of Network Switches 48 Port Gigabyte (manageable) Each 0 0 117 Supplying fixing of Network Switches 48 Port Gigabyte (manageable) Each 2 48890 97780

Supplying fixing of Network Switches 24 Port Gigabyte (manageable) Each 0 0 118 Supplying fixing of Network Switches 24 Port Gigabyte (manageable) Each 1 41450 41450

Supplying fixing of Network Switches 48 port 10or100 Switch Each 0 0 119 Supplying fixing of Network Switches 48 port 10or100 Switch Each 2 15000 30000

Supplying fixing of Network Switches 24 port 10or100 Switch Each 0 0 120 Supplying fixing of Network Switches 24 port 10or100 Switch Each 1 4700 4700

Supplying & Fixing of …mtrs Cat Patch Cable 2mtr m 0 0 121 Supplying & Fixing of …mtrs Cat Patch Cable 2mtr m 22 257 5654

Supplying & Fixing of …mtrs Cat Patch Cable 3mtr m 0 0 122 Supplying & Fixing of …mtrs Cat Patch Cable 3mtr m 18 331 5958

Supplying & Fixing of Patch panel for LAN cabling 48 Port 10or100 patch panel No 0 0 123 Supplying & Fixing of Patch panel for LAN cabling 48 Port 10or100 patch panel No 2 14120 28240

Supplying & Fixing of Patch panel for LAN cabling 24 Port 10or100 patch panel No 0 0 124 Supplying & Fixing of Patch panel for LAN cabling 24 Port 10or100 patch panel No 1 4100 4100

UPS AND BATTERIES Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, AorC supply, with all accessories complete and Excluding batteries and wiring complete. 5 kVA OFF LINE UPS No 0 0 125 UPS AND BATTERIES Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, AorC supply, with all accessories complete and Excluding batteries and wiring complete. 5 kVA OFF LINE UPS No 1 39898 39898

Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 150 AH capacity No 0 0 126 Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 150 AH capacity No 6 28187 169122

Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anyR.O SYSTEM ( DRINKING WATER) situation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 25 LPH : Cabin Type Each 0 0 127 Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anyR.O SYSTEM ( DRINKING WATER) situation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 25 LPH : Cabin Type Each 2 25000 50000

Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anysituation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 50 LPH : Cabin Type Each 0 0 128 Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anysituation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 50 LPH : Cabin Type Each 2 44000 88000

Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 0 0 1 Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 22 2774.25 61033.5

0 0 2 Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 65 910.25 59166.25

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each 0 0 3 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each 12 5181.44 62177.28

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each 0 0 4 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each 13 6341 82433

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 0 0 5 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 5 4725.25 23626.25

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps each 0 0 6 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps each 22 3040.54 66891.88

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. each 0 0 7 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. each 16 1509.66 24154.56

Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 0 0 8 Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 13 3007.65 39099.450000000004

Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 0 0 9 Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 22 2250.17 49503.740000000005

Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 0 0 10 Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 22 7950.38 174908.36000000002

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 0 0 11 Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 22 1080 23760

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes m 0 0 12 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes m 165 402.08 66343.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes m 0 0 13 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes m 110 506.05 55665.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 32 mm nominal dia Pipes m 0 0 14 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 32 mm nominal dia Pipes m 110 394.65 43411.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 50 mm nominal dia Pipes m 0 0 15 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 50 mm nominal dia Pipes m 150 764.91 114736.5

Providing and fixing brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore No. 0 0 16 Providing and fixing brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore No. 6 907.07 5442.42

Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 20 mm nominal bore No. 0 0 17 Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 20 mm nominal bore No. 16 96.54 1544.64

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 0 0 18 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 458.8 411 188566.80000000002

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 0 0 19 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 226.8 308.72 70017.69600000001

Providing, supplying, fixing of Bib Cock including transportation, labour charges with all lead lift loading & unloading and incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Each 0 0 20 Providing, supplying, fixing of Bib Cock including transportation, labour charges with all lead lift loading & unloading and incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Each 32 2350 75200

Providing and fixing SS Grating 125mm dia - Round 0f VIKING fitting complete, including teflon with fixing. - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Each 0 0 21 Providing and fixing SS Grating 125mm dia - Round 0f VIKING fitting complete, including teflon with fixing. - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Each 68 260 17680

Providing and fixing CP. Health faucet with flexible hose, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete. Make : " - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work Each 0 0 22 Providing and fixing CP. Health faucet with flexible hose, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete. Make : " - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work Each 13 1665 21645

0 0 1 Providing and fixing Wooden Platform : Made out of teak wood of section 50x50mm of legs, 50x50mm for horizontals both at suitable intervals from the point of view of stability, the top of the platform covered with commercial block board of 25mm thick, all sides covered with 6mm thick one side teak plywood fixed firmly to the platform including joining the wooden sections properly using nails/ screws, fevicol including cost of wood, nails/screws, fevicol, cost of painting/polishing, labour, all lead and lift, cost of any incidental charges etc.(Rate Per Sq.Mtr) Sqm 36.52 8140 297272.80000000005

Teak Wood Horse Shoe Table : Of size overall Length 16'. L-12' x Width 2' or 2.5'x Height 2.5' =2 Nos. & 4' one "U" shape Table, such that when three table joined together and make one Horse shoe table. Leg size 2.5"x2.5" turning legs. Table upper portion patti of 4"x1.25" and bottom patti 2"x1.5". Top should be OST covered with Green cloth on top and front portion. Top should be provided with 8mm glass with Diamond polish. The Table shall be neatly finished and polished. No 0 0 2 Teak Wood Horse Shoe Table : Of size overall Length 16'. L-12' x Width 2' or 2.5'x Height 2.5' =2 Nos. & 4' one "U" shape Table, such that when three table joined together and make one Horse shoe table. Leg size 2.5"x2.5" turning legs. Table upper portion patti of 4"x1.25" and bottom patti 2"x1.5". Top should be OST covered with Green cloth on top and front portion. Top should be provided with 8mm glass with Diamond polish. The Table shall be neatly finished and polished. No 2 199800 399600

Teak Wood Witness Box : Length 4'xWidth 2.5'xHeight 4', made out of Teak wood legs (turning) size 4"x4" with side bars 3"x2". The Height from the ground shall be 6" with 18mm OST . Back Jungle wood support. All the sides shall be covered by 2"x2" reapers with suitable gap in between. The Witness Box shall be neatly finished and polished. Witness Box No 0 0 3 Teak Wood Witness Box : Length 4'xWidth 2.5'xHeight 4', made out of Teak wood legs (turning) size 4"x4" with side bars 3"x2". The Height from the ground shall be 6" with 18mm OST . Back Jungle wood support. All the sides shall be covered by 2"x2" reapers with suitable gap in between. The Witness Box shall be neatly finished and polished. Witness Box No 2 43920 87840

Teak Wood Accused Dock : Of size Length 8'xwidth 3'xHeight 4' with wooden platform. Made out of Teak wood leg size 4"x4". Side bars shall be 2"x2" . All the side shall be covered with 2"x1" reapers with suitable gap in between. A side door shall also be provided with locking device. The height of the Accused Dock from the ground shall be 6". The Accused Dock shall be neatly finished and polished. Accused Box No 0 0 4 Teak Wood Accused Dock : Of size Length 8'xwidth 3'xHeight 4' with wooden platform. Made out of Teak wood leg size 4"x4". Side bars shall be 2"x2" . All the side shall be covered with 2"x1" reapers with suitable gap in between. A side door shall also be provided with locking device. The height of the Accused Dock from the ground shall be 6". The Accused Dock shall be neatly finished and polished. Accused Box No 2 71980 143960

Teak Wood Easy Chair : Made out of Teak Wood Front legs of size 3"x3", back legs of size 4"x2", side patties should be in curved shape of size 6"x1.25". Handle should be of size 2.5'x4"x1.25" on either sides. When opened becomes 5' in length. Chair head side patti of size 2"x6"x1.25". Seat and back covered with Teak Wood with cane or batten of size 1.25"x0.75". Judge Chamber No 0 0 5 Teak Wood Easy Chair : Made out of Teak Wood Front legs of size 3"x3", back legs of size 4"x2", side patties should be in curved shape of size 6"x1.25". Handle should be of size 2.5'x4"x1.25" on either sides. When opened becomes 5' in length. Chair head side patti of size 2"x6"x1.25". Seat and back covered with Teak Wood with cane or batten of size 1.25"x0.75". Judge Chamber No 2 21980 43960

Computer Work Station : of size 4' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB. Each work station should be of size 3'x2'. (W xD) and should be closed on three sides with 18mm thick 3.5' height or 4' verticals and back. Each work station should have provision for Keyboard, CPU and 3 drawers to be provided on right side. No 0 0 6 Computer Work Station : of size 4' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB. Each work station should be of size 3'x2'. (W xD) and should be closed on three sides with 18mm thick 3.5' height or 4' verticals and back. Each work station should have provision for Keyboard, CPU and 3 drawers to be provided on right side. No 19 15820 300580

Wardrobe : Made out of 18mm OSR PLPB (good quality)/Ply with lamination. (One side raw Prelaminated particle board) on three sides and back of 12mm PLPB. Inner design should have drawers in the center with lock. Top 3 ft should be open with 1 hanger rod. Bottom portion should have 1 shelf. Exterior to be finished with laminate/ veneer as per requirement. (Rate per Sq feet) All office Sqm 0 0 7 Wardrobe : Made out of 18mm OSR PLPB (good quality)/Ply with lamination. (One side raw Prelaminated particle board) on three sides and back of 12mm PLPB. Inner design should have drawers in the center with lock. Top 3 ft should be open with 1 hanger rod. Bottom portion should have 1 shelf. Exterior to be finished with laminate/ veneer as per requirement. (Rate per Sq feet) All office Sqm 100.8 22596 2277676.8

Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet with shelf. Table 3 side closed with OST pre laminated sheet 12mm thickness. Complete with all accessories like 2 locks and handles with polish. Table shall be neatly finished and polished. For top 6mm Plain glass with Diamond polish. No 0 0 8 Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet with shelf. Table 3 side closed with OST pre laminated sheet 12mm thickness. Complete with all accessories like 2 locks and handles with polish. Table shall be neatly finished and polished. For top 6mm Plain glass with Diamond polish. No 10 44300 443000

Teak Wood Officer Table : (Accounts Officer Table) Of size 7'x3'x30". Made out of 2.25"x2.25" Teak Wood legs. Table upper side patti 4"x1.25" and lower side 2"x1.25" and 12mm Commercial ply with 1mm laminate wherever visible. Table to have one drawer and one cupboard on either side. Along with one Key board. Doors and Drawers to be provided with SS handles and good quality locks and channels. Each 0 0 9 Teak Wood Officer Table : (Accounts Officer Table) Of size 7'x3'x30". Made out of 2.25"x2.25" Teak Wood legs. Table upper side patti 4"x1.25" and lower side 2"x1.25" and 12mm Commercial ply with 1mm laminate wherever visible. Table to have one drawer and one cupboard on either side. Along with one Key board. Doors and Drawers to be provided with SS handles and good quality locks and channels. Each 2 41860 83720

Mediation Room Table (Size 2.5 m X w 0.9 X 40.75 Mtrs) : Amins, Records, APP, Library, Lady Advocate's Table of size L-2.50m x W -0.9 x H -0.75mtrs, with Drawers and cupboard on both sides. 18mm PLPB/Plywood with 1 mm laminated wherever visible, with Teak Wood edge beading for top. Each 0 0 10 Mediation Room Table (Size 2.5 m X w 0.9 X 40.75 Mtrs) : Amins, Records, APP, Library, Lady Advocate's Table of size L-2.50m x W -0.9 x H -0.75mtrs, with Drawers and cupboard on both sides. 18mm PLPB/Plywood with 1 mm laminated wherever visible, with Teak Wood edge beading for top. Each 14 62500 875000

Teak Wood Dias Reiling :- Made out of 3"x3" turning legs, affixed together in 2"x1" patti at top & bottom maintaining a distance of 12" between every leg. Further finished with 3"x1.5" pattis on top and bottom, such that the flat surface is seen above. To be fixed on site with necessary screws, embeded in the floor. (Per Running Meter ) m 0 0 11 Teak Wood Dias Reiling :- Made out of 3"x3" turning legs, affixed together in 2"x1" patti at top & bottom maintaining a distance of 12" between every leg. Further finished with 3"x1.5" pattis on top and bottom, such that the flat surface is seen above. To be fixed on site with necessary screws, embeded in the floor. (Per Running Meter ) m 25 9100 227500

Teak Wood Ornamental Chair with Lobo : Made out of Teak Wood, Rear leg of height 4'6" and 2.5"x1.5" section and front leg of height 18" with 2.5"x2.5" section with lathe. Seat frame of size 3"x1.5" with bottom 'H' type supports for legs. Seat and back to be made out of 32 density foam with cloth. The carms and the back to be shaped as per deisgn. Chair shall be neatly finished and polished. Each 0 0 12 Teak Wood Ornamental Chair with Lobo : Made out of Teak Wood, Rear leg of height 4'6" and 2.5"x1.5" section and front leg of height 18" with 2.5"x2.5" section with lathe. Seat frame of size 3"x1.5" with bottom 'H' type supports for legs. Seat and back to be made out of 32 density foam with cloth. The carms and the back to be shaped as per deisgn. Chair shall be neatly finished and polished. Each 2 23100 46200

Teak Wood Bench With Back : Size : 182.88cm L x 46cm W x 96cm H Legs 4.4 x 4.44cm. Patties at top and bottom around 5.68 x 2.54cm in section and polished seat shall be provided with 18mm block board with laminated sheet on the top of the Block board. Back with Teak wood patti. Each 0 0 13 Teak Wood Bench With Back : Size : 182.88cm L x 46cm W x 96cm H Legs 4.4 x 4.44cm. Patties at top and bottom around 5.68 x 2.54cm in section and polished seat shall be provided with 18mm block board with laminated sheet on the top of the Block board. Back with Teak wood patti. Each 32 27200 870400

Director Cushion Chair: High back chair with seat and back High quality feather touch Rexine. Arms with cushioning. Chair to have SS base with 5 Caster wheel legs along with Syncro Mechanisum. Each 0 0 14 Director Cushion Chair: High back chair with seat and back High quality feather touch Rexine. Arms with cushioning. Chair to have SS base with 5 Caster wheel legs along with Syncro Mechanisum. Each 63 12600 793800

High Back Cushion Chair :- High back Chair with seat and back high quality feather touch Rexin. Arms with cushioning. Chair to have 5 caster wheel legs with Syncro Mechanisum. Each 0 0 15 High Back Cushion Chair :- High back Chair with seat and back high quality feather touch Rexin. Arms with cushioning. Chair to have 5 caster wheel legs with Syncro Mechanisum. Each 20 17980 359600

Teak Wood Chair (Heavy Model) : Seat with Teak wood planks or cushion. Made out ofTeak wood Chair 3”x1 ¾ ” back legs 2 X 2 front Legs Chair side bars 3x1backwith 8 reapers. Chair size standard size. Chair shall be neatly finished and polished Each 0 0 16 Teak Wood Chair (Heavy Model) : Seat with Teak wood planks or cushion. Made out ofTeak wood Chair 3”x1 ¾ ” back legs 2 X 2 front Legs Chair side bars 3x1backwith 8 reapers. Chair size standard size. Chair shall be neatly finished and polished Each 68 9980 678640

Book Rack with glass : Of size 6'x3'x18". Made out of 18mm thick black board with 3 shelves laminated glass sheters, Inner side paint. Outer surface polish. Each 0 0 17 Book Rack with glass : Of size 6'x3'x18". Made out of 18mm thick black board with 3 shelves laminated glass sheters, Inner side paint. Outer surface polish. Each 8 33340 266720

Psudium : Made out of black boards with laminated top of size 4' X 16" X 2' with teak wood beading, outer surface design veneer inner side paint. Each 0 0 18 Psudium : Made out of black boards with laminated top of size 4' X 16" X 2' with teak wood beading, outer surface design veneer inner side paint. Each 1 19900 19900

Notice Board : Of size 5'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish. Each 0 0 19 Notice Board : Of size 5'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish. Each 6 19800 118800

Teak Wood Damaru Sofa Set : 1+3+1 with teapoy and cushion, front and back 4"x4" with turning. Sofa side bars 3.5'x1.25". Handle support patti 4"x1.25" and 2"x3", handle 6"x1.25". Seat and back support patti 2.5"x1.25". Sofa set shall be neatly finished and polished. Each 0 0 20 Teak Wood Damaru Sofa Set : 1+3+1 with teapoy and cushion, front and back 4"x4" with turning. Sofa side bars 3.5'x1.25". Handle support patti 4"x1.25" and 2"x3", handle 6"x1.25". Seat and back support patti 2.5"x1.25". Sofa set shall be neatly finished and polished. Each 2 96780 193560

Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provided suitable vertical support of 36mm Plywood. Table shall be provided with Footrest with suitable mm Plywood. Table Inner side shall be polish or paint. ( Rate per running ft.).KSFIC.DWD -93 Rft 0 0 21 Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provided suitable vertical support of 36mm Plywood. Table shall be provided with Footrest with suitable mm Plywood. Table Inner side shall be polish or paint. ( Rate per running ft.).KSFIC.DWD -93 Rft 109.88 4840 531819.2

KSFIC.T -68 (2020-21) Providing and fixing Veneer panelling over the 50mmX35mm Sal wood frame work and top coverd out of 4mm thick approved venner fixed over 12 mm ply finished in melamine polish ,complete including cost and conveyance of all material ,labour for all items of work HOM of equipment etc, complete as per specification ( Rate Per Sq Mtr ) Sqm 0 0 22 KSFIC.T -68 (2020-21) Providing and fixing Veneer panelling over the 50mmX35mm Sal wood frame work and top coverd out of 4mm thick approved venner fixed over 12 mm ply finished in melamine polish ,complete including cost and conveyance of all material ,labour for all items of work HOM of equipment etc, complete as per specification ( Rate Per Sq Mtr ) Sqm 5.81 7380 42877.799999999996

Providing 6kg SPM-TEC Powder Based stored presure type melting point at 600-650 degree C, Applicable on Class D metal fires in Magnesium, Aluminium, Zinc, Sodium Potassium, Francium, Lithium, Cesium, Pressure Guage, Gross weight Gross Weight 9.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 M M, Discharge Time less than 16 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction : Deep drawn & Co. , Mig welded, valve Construciton CE Approved : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 M M, 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete" No 0 0 1 Providing 6kg SPM-TEC Powder Based stored presure type melting point at 600-650 degree C, Applicable on Class D metal fires in Magnesium, Aluminium, Zinc, Sodium Potassium, Francium, Lithium, Cesium, Pressure Guage, Gross weight Gross Weight 9.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 M M, Discharge Time less than 16 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction : Deep drawn & Co. , Mig welded, valve Construciton CE Approved : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 M M, 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete" No 5 8100 40500

0 0 2 Providing 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete" No 3 6500 19500

Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle of scattered light sensor. The detector communicates with a fire detection control panel in loop technology via the loop RF interface. Two lithium batteries are accommodated in the detector base one as backup. The two coloured LED indicator with 360 visibility. Mechanical theft protection in the base. Radio transmission of 150 m (in free air), operating at delicensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25." No 0 0 3 Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle of scattered light sensor. The detector communicates with a fire detection control panel in loop technology via the loop RF interface. Two lithium batteries are accommodated in the detector base one as backup. The two coloured LED indicator with 360 visibility. Mechanical theft protection in the base. Radio transmission of 150 m (in free air), operating at delicensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25." No 50 11500 575000

Addressable Wireless Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control panel, 32 selectable tone and adjustable sound level, maximum output volume @ 1M distance 100 dB(A), output tone frequency range 440 Hz to 2900 Hz, Visual alarm device output frequency 0.5 Hz, Approved by LPCB for EN 54-3 standard with Intelligent Sounder Interface Module radio-linked. Radio transmission of 150 m (in free air), operating at de-licensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25." No 0 0 4 Addressable Wireless Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control panel, 32 selectable tone and adjustable sound level, maximum output volume @ 1M distance 100 dB(A), output tone frequency range 440 Hz to 2900 Hz, Visual alarm device output frequency 0.5 Hz, Approved by LPCB for EN 54-3 standard with Intelligent Sounder Interface Module radio-linked. Radio transmission of 150 m (in free air), operating at de-licensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25." No 3 14000 42000

approvSupply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in minus 10 degree c to pluss 55 degree c temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Approval: VDS/UL/EN54. Make: Advanced (UK), Simplex, Notifier,Argus(Uk) No 0 0 5 approvSupply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in minus 10 degree c to pluss 55 degree c temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Approval: VDS/UL/EN54. Make: Advanced (UK), Simplex, Notifier,Argus(Uk) No 3 4900 14700

FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete Make : WINCO/NEW Age - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 0 0 6 FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete Make : WINCO/NEW Age - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 5 10500 52500

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work No 0 0 7 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work No 2 1500 3000

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 Make: WINCO/NEW AGE complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 0 0 8 Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 Make: WINCO/NEW AGE complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 4 4500 18000

Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female Instantainious Gun metal coupling as per IS 903 WINCO/NEW AGE complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 0 0 9 Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female Instantainious Gun metal coupling as per IS 903 WINCO/NEW AGE complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 12 5000 60000

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with locing arrangement and painted with two coats of Fire red Enamel paint at outer ise of the Box and two coats of white enamel paint at inner side of the box is to accomodated 2 Nos. of Fire hose box size 20”x24”x10” complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 0 0 10 Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with locing arrangement and painted with two coats of Fire red Enamel paint at outer ise of the Box and two coats of white enamel paint at inner side of the box is to accomodated 2 Nos. of Fire hose box size 20”x24”x10” complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 4 6500 26000

Supplying Installing, testing and commissioning of Hose reel cabin M.S.Pressed reel of 600mm dia swinging type motion which allows a 180 degree swing and conforms to IS:884/85. - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 0 0 11 Supplying Installing, testing and commissioning of Hose reel cabin M.S.Pressed reel of 600mm dia swinging type motion which allows a 180 degree swing and conforms to IS:884/85. - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 3 5100 15300

SupplyingInstalling,testingandcommissioningof19mmdia40.0mlengthhosewithrubberliningsmoothbore,reinforcedofnatural/syntheticfibres,arubbercoverfinishshallbesmooth,flutedorfabricmarkedwithminimumthicknessof1.50mmandtowithstandaworkingpressureof10Kgf/sqcmconfirms&testedasperIS444/IS12585includingcostofmaterials, labour, usage charges of machinery complete as per specifications No 0 0 12 SupplyingInstalling,testingandcommissioningof19mmdia40.0mlengthhosewithrubberliningsmoothbore,reinforcedofnatural/syntheticfibres,arubbercoverfinishshallbesmooth,flutedorfabricmarkedwithminimumthicknessof1.50mmandtowithstandaworkingpressureof10Kgf/sqcmconfirms&testedasperIS444/IS12585includingcostofmaterials, labour, usage charges of machinery complete as per specifications No 4 6000 24000

Supply, Installation testing and commissioning of approved make heavy quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. -do- 150 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 0 0 13 Supply, Installation testing and commissioning of approved make heavy quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. -do- 150 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 80 3900 312000

Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 200 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 0 0 14 Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 200 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 4 4300 17200

Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 100 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 0 0 15 Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 100 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 60 2850 171000

Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 80 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 0 0 16 Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 80 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 25 2300 57500

2 19.59 KSRRB M300-52.2. Scarifying Existing Bituminous surface to a depth of 50mm by Mechanical Means. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material and complete as per specifications. MORTH Specification No. 305.4.3 Sqm 2475 3.57 8835.75 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 19.64 KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTH / Chapter 3 Sqm 3300 6.3 20790 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

7 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 cum 713 502.95 358603.35 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 20.18 KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 cum 742.5 1917.3 1423595.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

10 21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 Sqm 3300 35.7 117810 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

11 21.11.6 KSRRB 500-11. Providing and laying bituminous macadam on prepared surface with crushed coarse aggregates as per design mix formula for base / binding course including loading of aggregates with F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixd material in tipper to paver and laying mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density, but excluding cost of primer / tack coat including lead, lift and cost of all materials, labour, HOM of machineries complete as per specifications. MORTH /Chapter 5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 3.3 % VG-30 Bitumen cum 1218.25 6298.87 7673598.38 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

12 21.20.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects complete as per specifications. - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30 mm) with 5 % VG-30 Bitumen cum 609.13 8336.11 5077774.68 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

13 24.2.2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 600 M M Equilateral triangle -TYPE XI No 6 2594.55 15567.3 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

14 24.17 KSRRB M800-14.2. Reinforced cement concrete M-15 Grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc complete as per specifications.including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 Nos 3 2261.7 6785.1 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B8%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

15 24.18 KSRRB M800-14.3. Reinforced cement concrete M-15 Grade Hectometer stone of standard design as per IRC:26-1980, fixing in position including painting and printing etc complete as per specifications. including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 Nos 6 573.3 3439.8 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B9%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

16 24.3 Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below ground level as per approved drawing. Sqm 1.8 7220.85 12997.53 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B10%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

17 24.15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 Sqm 911 450.45 410359.95 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B11%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

18 24.41 KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer Nos 897 303.45 272194.65 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B12%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 21.1 KSR RB M500-10. Providing and applying tack coat using 80/100 grade bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.25 kg per sqm on the existing prepared bituminous surface (primed surface) cleaned with mechanical broom. complete as per specifications. Clause 503 of MORTH V revision Sqm 24365 13.21 321861.65 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 cum 440 31.5 13860 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 cum 55 4732.98 260313.9 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 28.8.2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 Tonne 4.74 78435.89 371786.12 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 34.6.3 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 600mm. dia M 50 3349.5 167475 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 37.59.1 Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications. Wall & bottom thickness 15cm Cum 123.75 7375.2 912681 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 cum 18.2 31.5 573.3 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 cum 1.2 4732.98 5679.58 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 34.6.5 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 900mm. dia M 20 5776.05 115521 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 28.8.2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 Tonne 0.1891 78435.89 14832.23 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 34.17 Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete. Cum 15.41 5598.18 86267.95 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11240&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 18.15 KSRRB M200-11.1. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removalof stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness complete as per specifications . II. By Mechanical Means:A. In area of light jungle. MORTH Specification No. 201 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Ha 0.468 19452.3 9103.68 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 19.59 KSRRB M300-52.2. Scarifying Existing Bituminous surface to a depth of 50mm by Mechanical Means. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material and complete as per specifications. MORTH Specification No. 305.4.3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 9750 3.57 34807.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 19.64 KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTH / Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 9750 6.3 61425 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 1579.5 31.5 49754.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 5915 502.95 2974949.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 20.5 Construction of granular sub-base Grading-V as Sub-base and drainage layer by providing coarse graded crushed stone aggregates of granite/trap/basalt material, mixing by mix in place method by rotavator at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98 % proctor density, complete as per specifications. Clause 401 of MORTH V Revision. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 2278.25 1837.5 4186284.38 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

7 20.18 KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 2193.75 1917.3 4206076.88 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

8 21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 9750 35.7 348075 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

10 21.11.6 KSRRB 500-11. Providing and laying bituminous macadam on prepared surface with crushed coarse aggregates as per design mix formula for base / binding course including loading of aggregates with F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixd material in tipper to paver and laying mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density, but excluding cost of primer / tack coat including lead, lift and cost of all materials, labour, HOM of machineries complete as per specifications. MORTH /Chapter 5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 3.3 % VG-30 Bitumen ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 487.5 5499.02 2680772.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B8%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

11 21.20.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects complete as per specifications. - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30 mm) with 5 % VG-30 Bitumen ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 243.75 7058.57 1720526.44 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B9%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

12 24.2.2 Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 600 M M Equilateral triangle -TYPE XI ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. No 5 2594.55 12972.75 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B10%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

13 24.17 KSRRB M800-14.2. Reinforced cement concrete M-15 Grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc complete as per specifications.including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 3 2261.7 6785.1 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B11%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

14 24.18 KSRRB M800-14.3. Reinforced cement concrete M-15 Grade Hectometer stone of standard design as per IRC:26-1980, fixing in position including painting and printing etc complete as per specifications. including additional M-15 concrete pedestal of 0.2mt. height above G.L. MORTH Specification No. 804 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 12 573.3 6879.6 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B12%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

15 24.3 Direction and Place Identification Signs upto 0.9 sqm Size Board: Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 x 45 x 60 em, 60 em below ground level as per approved drawing. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 0.9 7220.85 6498.76 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B13%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

16 24.15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 100 450.45 45045 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B14%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

17 24.41 KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 300 303.45 91035 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B15%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

18 34.6.3 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 600mm. dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 7.5 3349.5 25121.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B16%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 KSRRB M500-10. Providing and applying tack coat using 80/100 grade bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.25 kg per sqm on the existing prepared bituminous surface cleaned with mchancial broom. complete as per specifications. - using bitumen 80/100 on primed surfaces ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Sqm 9750 10.02 97695 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 243.75 31.5 7678.12 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 37.5 4612.86 172982.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 Providing and laying in position plain/Reinforced cement cement concrete M20 for sub-structure/Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Cum 78.48 5423.46 425633.14 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Tonne 5.27 65272.04 344133.78 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 19.2.1 KSRRB 300-1. Earthwork excavation by mechanical means for roads, drains & similar works in all types soils involving an average horizontal through upto 2 mtrs and an average lift upto 1.5 mtr to 2 mtr excavated surface levelled and sides neatly dressed, the disposed earth to be levelled neatly after breaking of clods complete as per specifications. MORTH I Chapter 3 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 35.16 31.5 1107.54 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 34.1 KSRRB M2900- PCC M10 in Foundation KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 3.56 4612.86 16421.78 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 34.6.5 Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 / 2300 - - 900mm. dia ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. M 15 5776.05 86640.75 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. cum 17.66 502.95 8882.1 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 KSRRB M2200-5.9. Design mix M20 with OPC cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008 - i) Upto 5 m height. ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Cum 27.07 5423.46 146813.06 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 KSRRB M2200- TMT/MS Bar Reinforcement KSRRB M2200-6. Supplying, fitting and placing TMT bar reinforcement in sub-structure complete as per drawing and Technical Specifications complete as per specificationsMORTH Specification No.1600 & 2200 ---- including cost of all materials, labour,HOM,l & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Tonne 0.64 65272.04 41643.56 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=16211&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 18.2 KSRRB M200-13.1. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. II. By Mechanical Means. A. Cement Concrete Grade M-15 &M-20. MORTH Specification No. 202 cum 51.21 413.4 21170.21 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 18.29 KSRRB M200-15.4. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. iii) Dismantling Stone Masonry D. Dry rubble masonry. MORTH Specification No. 202 cum 60.75 240.62 14617.66 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 27.4 “KSRRB M2100-2.1. Earth work in excavation for foundation of structures as perdrawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specifications. B. Mechanical Means (i ) Depth upto 3 m” MORTH Specification No. 304 cum 1014.684 53 53778.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 27.5 “KSRRB M2100-2.2.Earth work in excavation for foundation of structures as perdrawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete as per specifications. B. Mechanical Means (ii ) Depth 3 m to 6 m” MORTH Specification No. 304 cum 34.4534 60.42 2081.67 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 28.8.2 KSRRB M2200-6. Providing T. M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200 TMT Bars Fe 500 M.T. 37.94 86385.12 3277019.53 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 29.9.2 KSRRB M2300-14. Providing T M. T steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 1600 & 2200 - TMT Bars Fe 500 M.T. 14.38 88049.32 1266395.76 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 27.24 KSRRB M2100-13. Plain / Reinforced Cement Concrete M15 with OPC cement @ 240kgs, with 40mm and down size graded granite metal coarse aggregates @0.84cum and fine aggregates @ 0.56cum in Open Foundation complete as per Drawing and Technical Specifications MORTH Specification No. 1500,1700 & 2100 cum 56.592 5751.77 325504.17 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 28.7.12 K8RRB M2200-5.12. Providing and laying Design mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts confirming to 189103-1999 Reaffirmed-2008 - i) Upto 5m height cum 494.76 6052.81 2994688.28 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

7 28.7.13 K8RRB M2200-5.13. Providing and laying Design mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser @31ts confirming to 189103-1999 Reaffirmed-2008 including cost of materials, labour, HOM curing, form works, scaffolding and centering complete as per specifications. - ii)For height, 5m to 10m cum 1.66 6793.75 11277.62 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

15 31.4 KSRRB M2600-4. (iii)Providing and fixing in position 300 mm wide, 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing & Technical Specification MORTH Specification No. 2605 M 61.56 164.3 10114.31 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B14%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 32.8 KSRRB M2300-16. Providing and laying Cement concrete wearing coat with OPC cement design mix M30 @ 360 kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes@ 0.46cum, and reinforcement at 75 kg/cum with superplastisiser @31ts confirming to IS9103-1999 Reaffirmed-2008 including cost of reinforcement complete as per drawing and Technical Specifications including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 2702 Cum 27.3 11291.97 308270.78 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

8 29.6.1 T - Beams & slabs KSRRB M2300-3.2. Furnishing and Placing Reinforced / Prestressed cement concrete in super-structure as per drawing and Technical Specification complete as per specifications. B. RCC with OPC cement design mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed- 2008, Case - I : Using Concrete Mixer MORTH Specification No. 1500,1600 & 1700 - Height upto 5 m cum 241.08 7497.59 1807519 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 32.6 KSRRB M2700-6. PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification complete as per specifications MORTH Specification No. 2700 cum 10.05 6105.81 61363.39 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B8%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

10 32.7 KSRRB M2700-7. Reinforced cement concrete M30 approach slab including reinforcement@ 70 kg/cum and formwork complete as per drawing and Technical specification including cost of materials, labour, HOM complete as per specifications. MORTH Specification No.1500, 1600, 1700 & 2704 cum 21 10928.39 229496.19 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B9%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

11 28.13 KSRRB M2200- Filter Media KSRRB M2200-9. Providing and laying of Filter media with granular materials /stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 2504.2.2 cum 158.8056 2216.46 351986.26 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B10%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

12 28.11 KSRRB M2200-8.1. Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification including cost of materials, labour, HOM of machineries, complete as per specifications. A. Granular material MORTH Specification No. 2204 & 304 cum 638.972 895.7 572327.22 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B11%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

13 32.5 KSRRB M2700-5. Drainage Spouts using 1OOmm class 'B' Gl pipe as per drawing and Technical specification including clamps and nuts etc., including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 2705 No 12 1645.12 19741.44 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B12%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

14 28.1 KSRRB M2200- Providing Weep Holes KSRRB M2200-8. Providing weep holes in Brick masonry I Plain I Reinforced concrete abutment, wing wall I return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing force. Complete as per drawing and Technical Specifications including cost of materials, labour, HOM complete as per specifications. MORTH Specification No.2706 & 2200 Nos/mtr 65.6 155.82 10221.79 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B13%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 32.3 KSRRB M2700-3. Construction of RCC railing ofM30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 2703,1500,1600 & 1700 M 72.8 1853.6 134942.08 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 18.15 KSRRB M200-11.1. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removalof stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness complete as per specifications . II. By Mechanical Means:A. In area of light jungle. MORTH Specification No. 201 Ha 0.069 19452.3 1342.21 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

2 19.6 KSRRB M300- Construction of Embankment with Material Gravel/ Murrum. KSRRB M300-53. Construction of embankment with approved material Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300- 2 complete as per specifications.(Including cost of gravel / murrum, watering charges & compaction by vibratory roller to 95% of proctors density) MORTH Specification No. 305 cum 1150 477.75 549412.5 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B1%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

3 19.62 KSRRB M300-Construction of Subgrade and Earthen Shoulders. KSRRB M300-55. Construction of sub-grade and earthen shoulders with approved material Gravel/Murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory rollercompaction by vibratory roller to 97% of proctors density) MORTH Specification No. 305 cum 474.375 502.95 238586.91 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B2%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

4 19.64 KSRRB 300-Compaction KSRRB 300-58. Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTH / Chapter 3 Sqm 1380 6.3 8694 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B3%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

5 20.5 Construction of granular sub-base Grading-V as Sub-base and drainage layer by providing coarse graded crushed stone aggregates of granite/trap/basalt material, mixing by mix in place method by rotavator at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the 98 % proctor density, complete as per specifications. Clause 401 of MORTH V Revision. cum 146.625 1837.5 269423.44 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B4%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

6 20.18 KSRRB M400- Wet Mix Macadam KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 cum 142.3125 1917.3 272855.76 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B5%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

7 21.6 KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. MORTH Specification No. 502 Sqm 632.5 35.7 22580.25 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B6%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

1 21.1 KSRRB M500-10. Providing and applying tack coat using 80/100 grade bitumen(VG10) in boiler fitted with spray set distributor at the rate of 0.25 kg per sqm on the existing prepared bituminous surface cleaned with mchancial broom. complete as per specifications. - using bitumen 80/100 on primed surfaces Sqm 632.5 13.21 8355.32 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3AviewWorkIndent.viewLbd%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummaryNonSOREstimatesList%5B0%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

9 21.11.6 KSRRB 500-11. Providing and laying bituminous macadam on prepared surface with crushed coarse aggregates as per design mix formula for base / binding course including loading of aggregates with F.E. loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixd material in tipper to paver and laying mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density, but excluding cost of primer / tack coat including lead, lift and cost of all materials, labour, HOM of machineries complete as per specifications. MORTH /Chapter 5 - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 3.3 % VG-30 Bitumen cum 31.625 6298.87 199201.76 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B7%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

10 21.20.6 KSRRB M500-18. Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects complete as per specifications. - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (25 mm to 30 mm) with 5 % VG-30 Bitumen cum 15.8125 8336.11 131814.74 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B8%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

11 24.15 KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 Sqm 43.125 450.45 19425.66 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B9%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

12 24.41 KSRRB M800 Road markers I Road stud KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer Nos 60 303.45 18207 (https://eproc.karnataka.gov.in/eprocurement/jsf/indent/view_work_indent_work_detailestimate.seam?pageId=view_work_indent_detailestimate&actionMethod=jsf%2Findent%2Fview_work_indent_work_detailestimate.xhtml%3ArateAnalysis.viewRateAnalysis%28+detailEstimate+%29&conversationId=11199&conversationIsLongRunning=true&conversationPropagation=join&dataModelSelection=detailEstimate%3AworkIndentWorkSummarySOREstimatesList%5B10%5D塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Descrp Unit Qty Rate

1 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 6 6.3 10309.25 64948.28 1 Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 305.4.3 m² 10309.25 6.3

2 Category : Vol - 1 -Chapter -I- Earth Work --- 95 99.75 860.25 85809.94 2 Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth m³ 860.25 99.75

3 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 493 517.65 2556.4 1323320.46 3 Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 m³ 2556.4 517.65

4 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2359 2476.95 3010.3 7456362.58 4 Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - For Grading -V Material. Ref to MoRT&H : IRC - 401 m³ 3010.3 2476.95

5 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2559 2686.95 4054 10892895.3 5 Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 m³ 4054 2686.95

6 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 41 43.05 17195 740244.75 6 Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502 m² 17195 43.05

7 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 15 15.75 1375 21656.25 7 Tack coat on Granular surface treated with primer - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. Ref to MoRT&H : IRC - 503 m² 1375 15.75

8 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 12 12.6 17195 216657 8 Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Ref to MoRT&H : IRC - 503 m² 17195 12.6

9 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 9449 9921.45 929.88 9225757.93 9 Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Ref to MoRT&H : IRC - 505 m³ 929.88 9921.45

10 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 10954 11501.7 557.1 6407597.07 10 Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Ref to MoRT&H : IRC - 507 m³ 557.1 11501.7

11 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 748 785.4 400 314160 11 Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting. Ref to MoRT&H : IRC - 807 each 400 785.4

12 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 2927 3073.35 4 12293.4 12 Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer stone (precast). Ref to MoRT&H : IRC - 805 each 4 3073.35

13 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 842 884.1 16 14145.6 13 Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). Ref to MoRT&H : IRC - 805 each 16 884.1

14 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 3576 3754.8 8 30038.4 14 Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 - 60 cm equilateral triangle. Ref to MoRT&H : IRC - 801 each 8 3754.8

15 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 4297 4511.85 8 36094.8 15 Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 - 60 cm circular. Ref to MoRT&H : IRC - 801 each 8 4511.85

16 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 9010 9460.5 3.6 34057.8 16 Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. Ref to MoRT&H : IRC - 801 m² 3.6 9460.5

17 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 365 383.25 566 216919.5 17 Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. Ref to MoRT&H : IRC - MoRTH 806 No. 566 383.25

18 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 530 556.5 999.24 556077.06 18 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Ref to MoRT&H : IRC - 803 m² 999.24 556.5

19 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 37970 39868.5 2 79737 19 Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of 0.1 m as per IRC 99:2018 using Dense Bituminous Macadam (DBM) Gr II and Bituminous Concrete (BC) Gr II for entire formation width & WBM Gr II for Shoulder hump portion only (150 mm thick), completing with road marking paint with applied thermoplastic compound with reflecting glass beeds on bituminous surface and providing 2 Nos. retro reflective traffic signs as per IRC 67 -2022 - Single lane with formation width of 5.75 m. Ref to MoRT&H : IRC - IRC 99 : 2018 No. 2 39868.5

20 Category : Vol - 1 -Chapter -I- Earth Work --- 119 124.95 2516.76 314469.16 20 Manual Means - Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m³) m³ 2516.76 124.95

21 Category : Vol - 1 -Chapter -I- Earth Work --- 474 497.7 1323.39 658651.2 21 Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. m³ 1323.39 497.7

Descrp Unit Qty Rate

1 Category : Vol - 1 -Chapter -I- Earth Work --- 102 107.1 26.63 2852.07 1 Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m m³ 26.63 107.1

2 Category : Vol - 1 -Chapter -II- Concrete Works 0 5989 6288.45 6.87 43201.65 2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates m³ 6.87 6288.45

3 Category : Vol - 1 -Chapter -II- Concrete Works 0 6323 6639.15 34.64 229980.16 3 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 34.64 6639.15

4 Category : Vol - 3 -Chapter -16- PANCHAYATH RAJ ENGINEERING DEPARTMENT ITEMS --- 7958 8355.9 30 250677 4 PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6. - 1000mm dia. Ref to MoRT&H : IRC - 1101.6 m 30 8355.9

5 Category : Vol - 3 -Chapter -16- PANCHAYATH RAJ ENGINEERING DEPARTMENT ITEMS --- 2592 2721.6 22.5 61236 5 Laying Cement Concrete Pipe NP3 (burried conduits) of 500mm dia on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets. Ref to MoRT&H : IRC - 1101.6 m 22.5 2721.6

6 Category : Vol - 1 -Chapter -II- Concrete Works 0 79011 82961.55 0.7 58073.08 6 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures t 0.7 82961.55

Descrp Unit Qty Rate

1 Item Code : As per SE BGM approved rate for 2023-24) 39810 0.28 No --- 11146.8 1 Road Maintenance for 3rd year for road with DBM+BC as wearing Coat Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road Maintenance of surface drains by cleaning cleaning, reshaping deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material irregularities on shoulder wherever necessary Maintenance & painting of 200 metre and km stones. Whee washing of parapet walls of CD work and tree trunks. Patching of shallow and deep potholes using premix bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance Km 0.28 39810

2 Item Code : As per SE BGM approved rate for 2023-24) 73440 0.28 No --- 20563.2 2 Road Maintenance for 4th year for road with DBM+BC as wearing Coat Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road. Maintenance of surface drains by clearing. cleaning reshaping deepening of side drains. Stripping excess soil from the shoulder surface and Making up loss of material irregularities on shoulder wherever necessary Maintenance & painting of 200 metre and ikm stones White washing of parapet walls of CD work and tree trunks. Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance Road Km 0.28 73440

3 Item Code : As per SE BGM approved rate for 2023-24) 101980 0.28 No --- 28554.4 3 Maintenance for 5th year with DBM+BC coat as wearing Coat Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road. Maintenance of surface drains by clearing cleaning, reshaping deepening of side drains Stripping excess soil from the shoulder surface and Making up loss of material irregularities on shoulder wherever necessary Maintenance & painting of 200 metre and km stones White washing of parapet walls of CD work and tree trunks Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road arid Repairs to CDs including Vent Clearance Km 0.28 101980

4 Item Code : As per SE BGM approved rate for 2023-24) 36230 3.02 No --- 109414.6 4 Road Maintenance for 3rd year for road with DBM+BC as wearing Coat Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road Maintenance of surface drains by cleaning cleaning, reshaping deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material irregularities on shoulder wherever necessary Maintenance & painting of 200 metre and km stones. Whee washing of parapet walls of CD work and tree trunks. Patching of shallow and deep potholes using premix bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance Km 3.02 36230

5 Item Code : As per SE BGM approved rate for 2023-24) 64240 3.02 No --- 194004.8 5 Road Maintenance for 4th year for road with DBM+BC as wearing Coat Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road. Maintenance of surface drains by clearing. cleaning reshaping deepening of side drains. Stripping excess soil from the shoulder surface and Making up loss of material irregularities on shoulder wherever necessary Maintenance & painting of 200 metre and ikm stones White washing of parapet walls of CD work and tree trunks. Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance Road Km 3.02 64240

6 Item Code : As per SE BGM approved rate for 2023-24) 87690 3.02 No --- 264823.8 6 Maintenance for 5th year with DBM+BC coat as wearing Coat Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road. Maintenance of surface drains by clearing cleaning, reshaping deepening of side drains Stripping excess soil from the shoulder surface and Making up loss of material irregularities on shoulder wherever necessary Maintenance & painting of 200 metre and km stones White washing of parapet walls of CD work and tree trunks Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road arid Repairs to CDs including Vent Clearance Km 3.02 87690

Sl Item Unit Qty Rate Amount

1 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 3 1663 1764.28 17.56 30980.76 1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. m³ 17.56 1764.28 30980.756799999996

2 Category : Vol - 1 -Chapter -II- Concrete Works 3 6734 12144.97 130.85 1589169.32 2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 130.85 12144.97 1589169.3244999999

3 Category : Vol - 1 -Chapter -II- Concrete Works 3 6734 11430.56 224.57 2566960.86 3 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 224.57 11430.56 2566960.8592

4 Category : Vol - 1 -Chapter -II- Concrete Works 3 6734 10716.15 322.61 3457137.15 4 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 322.61 10716.15 3457137.1515

5 Category : Vol - 1 -Chapter -II- Concrete Works 3 6734 10358.95 14.86 153934 5 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates m³ 14.86 10358.95 153933.997

6 Category : Vol - 1 -Chapter -II- Concrete Works 3 80195 85078.88 96.49 8209261.13 6 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings t 96.49 85078.88 8209261.1312

7 Category : Vol - 2 -Chapter -7- Roofing 3 2017 2139.84 14.13 30235.94 7 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. m³ 14.13 2139.84 30235.939200000004

8 Category : Vol - 2 -Chapter -15- Water Proofing 3 615 652.45 47.11 30736.92 8 Integral Crystalline water proofing Admixture - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re- inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) m³ 47.11 652.45 30736.9195

9 Category : Vol - 2 -Chapter -6- Masonry Works 3 8179 8677.1 671.02 5822507.64 9 Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m³ 671.02 8677.1 5822507.642

10 Category : Vol - 2 -Chapter -6- Masonry Works 3 1055 1119.25 340.19 380757.66 10 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. m² 340.19 1119.25 380757.6575

11 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 3 565 599.41 1156.89 693451.43 11 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. kg 1156.89 599.41 693451.4349

12 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 3 168 178.23 6833.28 1217895.49 12 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 6833.28 178.23 1217895.4944

13 Category : Vol - 2 -Chapter -12- Wood and PVC Works 3 6734 7144.1 235.88 1685150.31 13 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of Glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float Glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) m² 235.88 7144.1 1685150.308

14 Category : Vol - 2 -Chapter -12- Wood and PVC Works 3 5719 6067.29 47.11 285830.03 14 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head Glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) m² 47.11 6067.29 285830.0319

15 Category : Vol - 2 -Chapter -12- Wood and PVC Works 3 98815 104832.83 6.36 666736.8 15 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. m³ 6.36 104832.83 666736.7988

16 Category : Vol - 2 -Chapter -12- Wood and PVC Works 3 4532 4808 132.93 639127.44 16 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side Teak m² 132.93 4808 639127.4400000001

17 Category : Vol - 2 -Chapter -12- Wood and PVC Works 3 1015 1076.81 51 54917.31 17 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No. 51 1076.81 54917.31

18 Category : Vol - 2 -Chapter -10- Cladding Works 3 60 63.65 394 25078.1 18 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 12 mm each 394 63.65 25078.1

19 Category : Vol - 2 -Chapter -10- Cladding Works 3 3989 4231.93 28.4 120186.81 19 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resist- ance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand- wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete - For Straight Portion m² 28.4 4231.93 120186.812

20 Category : Vol - 2 -Chapter -10- Cladding Works 3 4003 4246.78 277.68 1179245.87 20 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of the slab upto 0.50 m2 m² 277.68 4246.78 1179245.8704

21 Category : Vol - 2 -Chapter -9- Flooring 3 2848 3021.44 871.42 2632943.24 21 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. m² 871.42 3021.44 2632943.2448

22 Category : Vol - 2 -Chapter -10- Cladding Works 3 328 347.98 2186.37 760813.03 22 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. m 2186.37 347.98 760813.0326

23 Category : Vol - 2 -Chapter -9- Flooring 3 885 938.9 110.36 103617 23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. m² 110.36 938.9 103617.004

24 Category : Vol - 2 -Chapter -9- Flooring 3 1446 1534.06 570.32 874905.1 24 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. m² 570.32 1534.06 874905.0992

25 Category : Vol - 2 -Chapter -9- Flooring 3 1326 1406.75 1233.46 1735169.86 25 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm m² 1233.46 1406.75 1735169.855

26 Category : Vol - 2 -Chapter -8- Finishing 3 347 368.13 3562.38 1311418.95 26 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m² 3562.38 368.13 1311418.9494

27 Category : Vol - 2 -Chapter -8- Finishing 3 351 372.38 2845.33 1059543.99 27 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. m² 2845.33 372.38 1059543.9854

28 Category : Vol - 2 -Chapter -8- Finishing 3 52 55.17 1332.24 73499.68 28 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 1332.24 55.17 73499.6808

29 Category : Vol - 2 -Chapter -8- Finishing 3 320 339.49 570.32 193617.94 29 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. m² 570.32 339.49 193617.93680000002

30 Category : Vol - 2 -Chapter -8- Finishing 3 44 46.68 3029.62 141422.66 30 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 200mm wide m 3029.62 46.68 141422.6616

31 Category : Vol - 2 -Chapter -8- Finishing 3 174 184.6 2845.33 525247.92 31 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 2845.33 184.6 525247.918

32 Category : Vol - 2 -Chapter -8- Finishing 3 100 106.09 5495.22 582987.89 32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. m² 5495.22 106.09 582987.8898

33 Category : Vol - 2 -Chapter -8- Finishing 3 127 134.73 5495.2 740368.3 33 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 5495.2 134.73 740368.296

34 Category : Vol - 2 -Chapter -8- Finishing 3 50 53.04 282.99 15009.79 34 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 282.99 53.04 15009.7896

35 Category : Vol - 2 -Chapter -8- Finishing 3 115 122 282.99 34524.78 35 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 282.99 122 34524.78

36 Category : Vol - 2 -Chapter -8- Finishing 3 53 56.23 346.39 19477.51 36 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 346.39 56.23 19477.5097

37 Category : Vol - 2 -Chapter -8- Finishing 3 138 146.4 346.39 50711.5 37 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. m² 346.39 146.4 50711.496

38 Category : Vol - 2 -Chapter -15- Water Proofing 3 817 866.76 2177 1886936.52 38 polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa- terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa- terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. m² 2177 866.76 1886936.52

39 Category : Vol - 2 -Chapter -22- Building Essentials 3 375 397.84 51 20289.84 39 Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm No 51 397.84 20289.84

40 Category : Vol - 2 -Chapter -12- Wood and PVC Works 3 1052 1116.07 51 56919.57 40 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No. 51 1116.07 56919.57

41 Category : Vol - 2 -Chapter -22- Building Essentials 3 1500 1591.35 114 181413.9 41 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length No 114 1591.35 181413.9

Extra for providing throating or drip moulding toR.C.C. chajja with plastering (labour charges only) as per specifications. Specification No. KBS 42 Extra for providing throating or drip moulding toR.C.C. chajja with plastering (labour charges only) as per specifications. Specification No. KBS Rmtr 195.5 35.01 6844.455

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm 43 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm Sqm 1233.45 221.73 273492.8685

Providing Elevation cornice of 350mm DEPTH including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. 44 Providing Elevation cornice of 350mm DEPTH including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. m 127 13000 1651000

Providing Elevation facade of 0.95mtr x 0.70 mtr including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. 45 Providing Elevation facade of 0.95mtr x 0.70 mtr including cornice and grooves as per approved design and drawings. made by using FRC material (Fibre Resin Concrete) with neccesary fabrication of nagative mould (Factory made) for making more no of elevation faceds, Including cost of all materials, tools and tackles, skilled labours for fabrication and fixing of elevation faceds in all heigths, lift, loading, unloading and transportation of fabricated material from factory (Bangaluru) for all the materials, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. No 80 12800 1024000

Providing, supplying, fixing of DOOR catchers to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 46 Providing, supplying, fixing of DOOR catchers to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. No 50 515 25750

Providing, supplying, fixing of 5" S.S. Hinges to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 47 Providing, supplying, fixing of 5" S.S. Hinges to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 221 455 100555

Providing, supplying, fixing of 10" S.S. Tower Bolt to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 48 Providing, supplying, fixing of 10" S.S. Tower Bolt to Doors, windows including transportation, labour charges with all lead lift incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Nos 63 875 55125

Providing, supplying, of Locking Arrangenents to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work 49 Providing, supplying, of Locking Arrangenents to Doors including transportation, labour charges with all lead lift incidental charges etc., complete MR including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work Nos 44 650 28600

Providing and fixing polymeric Expansion joint with 22mm thick polymeric Expansion joint filler with all the necessary material, Transportation charges etc., complete as per relevant IS Standerd and the direction of engineer charge. 50 Providing and fixing polymeric Expansion joint with 22mm thick polymeric Expansion joint filler with all the necessary material, Transportation charges etc., complete as per relevant IS Standerd and the direction of engineer charge. Sqm 31.87 2228 71006.36

Providing and filling expansion joint in columns and slab with FOSROC THIO FLEX -600 Gun Grade including primer 7 and covering the expansion joint with alluminium sheet (100mm wide x 5mm thick ) by screwing to conctrete surface one side fixed and another side ablong hole. The rate includes for all the materials,labours, scaffolding, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. 51 Providing and filling expansion joint in columns and slab with FOSROC THIO FLEX -600 Gun Grade including primer 7 and covering the expansion joint with alluminium sheet (100mm wide x 5mm thick ) by screwing to conctrete surface one side fixed and another side ablong hole. The rate includes for all the materials,labours, scaffolding, etc. and work is to be carried out as per standard technical specification and direction of the engineer in charge of the work. m 162.5 2050 333125

Providing and Fixing new Stainless steel boards of thickness 22 guage (0.644mm) For Minister rooms, Secretary cublicles rooms, of various sizes, the letters of the boards are printed with stickering process in Black colour as per direction of Engineer-in-charge (including cost of materials, labour, transportation, loading, unloading charges) at Suvarna soudha belagavi. (18"X8") 52 Providing and Fixing new Stainless steel boards of thickness 22 guage (0.644mm) For Minister rooms, Secretary cublicles rooms, of various sizes, the letters of the boards are printed with stickering process in Black colour as per direction of Engineer-in-charge (including cost of materials, labour, transportation, loading, unloading charges) at Suvarna soudha belagavi. (18"X8") No 108 2900 313200

Providing and Fixing new Titanium boards of ministers, Legislative Council/Assembly, Corridors/Lounges, Titanium plate of thickness 22 Guage (0.644mm), on that Gold glossy finished Titanium letters are embedded by permanent itching process, boards are painted by Red/Green colour venyl paint in two coats, as per direction of Engineer-in-charge (including cost of material, labour, transportation, loading, unloading charges) at Suvarna soudha Belagavi. (48"X16") 53 Providing and Fixing new Titanium boards of ministers, Legislative Council/Assembly, Corridors/Lounges, Titanium plate of thickness 22 Guage (0.644mm), on that Gold glossy finished Titanium letters are embedded by permanent itching process, boards are painted by Red/Green colour venyl paint in two coats, as per direction of Engineer-in-charge (including cost of material, labour, transportation, loading, unloading charges) at Suvarna soudha Belagavi. (48"X16") No 2 18000 36000

Sl Item Unit Qty Rate Amount

1 Item Code : page no2 item no1.2.1 66 2500 No --- 165000 1 SLAB CONCEALED CONDUTE SYSTEM Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalorPVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 119or20 mm dia 2 mm thick Per Mtr 2500 66 165000

2 Item Code : page no2 item no1.2.2 78 2300 No --- 179400 2 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metalorPVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick Per Mtr 2300 78 179400

3 Item Code : page no2 item no1.3.1 68 2600 No --- 176800 3 WALL GROOVE CUTTING FOR CONDUTE SYSTEM Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19or20 mm dia 2 mm thick Per Mtr 2600 68 176800

4 Item Code : page no2 item no1.3.2 79 3400 No --- 268600 4 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Per Mtr 3400 79 268600

5 Item Code : page no2 item no1.4.3 139 6 No --- 834 5 Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cableorconduit entry asrequired with one coat of primer of approved make etc. 135 x 75 x 65 mm Each 6 139 834

6 Item Code : page no2 item no1.4.4 161 4 No --- 644 6 Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cableorconduit entry asrequired with one coat of primer of approved make etc.180 x 90 x 65 mm Each 4 161 644

7 Item Code : page no2 item no1.5.1 49 100 No --- 4900 7 WALL JUNCTION BOX METALor PVC Supplying and fixing PVCormetal conduit Deep junction box 19or20 mm deep Junction box Each 100 49 4900

8 Item Code : page no3 item no1.5.2 56 80 No --- 4480 8 Supplying and fixing PVCormetal conduit Deep junction box 25 mm deep Junction box Each 80 56 4480

9 Item Code : page no3 item no1.6.3 112 4 No --- 448 9 Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete. 10" x 7" x 3" (254 x 178 x 76 mm) Each 4 112 448

10 Item Code : page no3 item no1.6.4 86 6 No --- 516 10 Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete. 8" x 6" x 3" (203 x 152 x 76 mm) Each 6 86 516

11 Item Code : page no3 item no1.9.1 19 80 No --- 1520 11 FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 20mm Mtr 80 19 1520

12 Item Code : page no3 item no1.9.2 22 60 No --- 1320 12 FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25mm Mtr 60 22 1320

13 Item Code : page no3 item no1.9.3 29 40 No --- 1160 13 FLEXIBLE PVCor GI PIPE Supplying PVCorGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 32mm Mtr 40 29 1160

14 Item Code : page no4 item no1.13 117 115 No --- 13455 14 FAN METALor PVC BOX Supplying And Fixing Metal Fan Box with Round Hook. No 115 117 13455

15 Item Code : page no8 item no3.4.1 138 90 No --- 12420 15 MODULAR SWITCH METAL BOX Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 1-3 Way Each 90 138 12420

16 Item Code : page no8 item no3.4.3 177 30 No --- 5310 16 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 4-5 Way Each 30 177 5310

17 Item Code : page no8 item no3.4.4 220 40 No --- 8800 17 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 6 Way Each 40 220 8800

18 Item Code : page no8 item no3.4.5 261 85 No --- 22185 18 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 8 Way Each 85 261 22185

19 Item Code : page no8 item no3.4.6 319 55 No --- 17545 19 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 10-12 Way Each 55 319 17545

20 Item Code : page no8 item no3.4.8 405 15 No --- 6075 20 Supplying and flush mounting powder coated or galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrickorStoneorC.C wall 16-18 Way Each 15 405 6075

21 Item Code : page no8 item no3.5.2 137 90 No --- 12330 21 MODULAR SWITCH MOUNTING PLATES Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 1 to 3 Module Each 90 137 12330

22 Item Code : page no8 item no3.5.3 161 30 No --- 4830 22 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 4 Module Each 30 161 4830

23 Item Code : page no8 item no3.5.4 234 40 No --- 9360 23 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 6 Module Each 40 234 9360

24 Item Code : page no8 item no3.5.5 284 85 No --- 24140 24 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 8 Module Each 85 284 24140

25 Item Code : page no8 item no3.5.6 344 55 No --- 18920 25 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 10-12 Module Each 55 344 18920

26 Item Code : page no8 item no3.5.8 457 15 No --- 6855 26 Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metalorPVC box. 16-18 Module Each 15 457 6855

27 Item Code : page no9 item no3.6.1 102 630 No --- 64260 27 MODULAR SWITCHES & SOCKETS Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 630 102 64260

28 Item Code : page no9 item no3.6.2 166 6 No --- 996 28 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch Each 6 166 996

29 Item Code : page no9 item no3.6.3 171 290 No --- 49590 29 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 290 171 49590

30 Item Code : page no9 item no3.6.4 357 115 No --- 41055 30 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 115 357 41055

31 Item Code : page no9 item no3.6.7 180 55 No --- 9900 31 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 55 180 9900

32 Item Code : page no9 item no3.6.8 177 12 No --- 2124 32 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 12 177 2124

33 Item Code : page no9 item no3.6.9 326 8 No --- 2608 33 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 8 326 2608

34 Item Code : page no9 item no3.6.10 236 55 No --- 12980 34 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6or16A Universal Socket Each 55 236 12980

35 Item Code : page no9 item no3.6.11 156 18 No --- 2808 35 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. TVorTelephone Socket Each 18 156 2808

36 Item Code : page no9 item no3.6.12 337 80 No --- 26960 36 Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293.RJ45orI.O Outlet Cat-6 Each 80 337 26960

37 Item Code : page no48 item no12.2.3 1190 12 No --- 14280 37 Supplying and fixing one of 230 V Ding dong bell and a flushtype bell push with gang box fixed on necessary wooden or rawlplugs using NF screws with Remote. Remote No 12 1190 14280

38 Item Code : page no10 item no3.14.6 71 250 No --- 17750 38 PBBCorBATTENor ANGLE HOLDERS 6A Lamp Holder No 250 71 17750

39 Item Code : page no18 item no5.19.11 4038 4 No --- 16152 39 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 4 4038 16152

40 Item Code : page no18 item no5.19.6 1524 4 No --- 6096 40 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door 4 Way SP & N Each 4 1524 6096

41 Item Code : page no18 item no5.19.8 1854 8 No --- 14832 41 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP & N Each 8 1854 14832

42 Item Code : page no18 item no5.19.9 2329 4 No --- 9316 42 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP & N Each 4 2329 9316

43 Item Code : page no18 item no5.19.11 4038 6 No --- 24228 43 Supplying and fixing regular MCB distribution boards onwallorood board or flush mounting using required clA, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phaseor3 phaseorsingle door with powder coatedpainting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 6 4038 24228

44 Item Code : page no5 item no2.2.1 269 35 No --- 9415 44 POINT WIRING Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch box Each Point 35 269 9415

45 Item Code : page no5 item no2.2.2 379 210 No --- 79590 45 Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Medium point above 3m upto 6m from tapping point to out letvia switch box Each Point 210 379 79590

46 Item Code : page no5 item no2.2.3 555 180 No --- 99900 46 Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box Each Point 180 555 99900

47 Item Code : page no5 item no2.2.4 677 20 No --- 13540 47 Supplying and wiring adopting loop system in existing PVCConduit orcasing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: andlatest amendments) without control switch shall be fixed on theexisting plastic sheetor gang box, the other end of the wires shallbe terminated with sufficient loose length in a woodorPVC roundblock. complete for each outlet. Two outlet in a row, above 3m upto 6m from tapping point to out let via switches Each Point 20 677 13540

48 Item Code : page no9 item no3.8 0.41 1800 No --- 738 48 Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc, and fixing on existingwooden or metal box using N.F. screws Sq CM 1800 0.41 738

49 Item Code : page no5 item no2.3.2 26 2800 No --- 72800 49 LIGHTING & POWER CIRCUTE CABLES Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5 mm2 m 2800 26 72800

50 Item Code : page no5 item no2.3.3 42 4900 No --- 205800 50 Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 2.5 mm2 m 4900 42 205800

51 Item Code : page no5 item no2.3.4 63 3100 No --- 195300 51 Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 4 mm2 m 3100 63 195300

52 Item Code : page no5 item no2.3.5 92 2100 No --- 193200 52 Wiring for lightingorpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments 6 mm2 m 2100 92 193200

53 Item Code : page no9 item no3.10.2 15 60 No --- 900 53 Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws. 80 mm No 60 15 900

54 Item Code : page no9 item no3.10.3 21 50 No --- 1050 54 Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws. 110 mm No 50 21 1050

55 Item Code : page no17 item no5.18.1 415 140 No --- 58100 55 MCB'S Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A SP Each 140 415 58100

56 Item Code : page no17 item no5.18.4 739 32 No --- 23648 56 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A DP Each 32 739 23648

57 Item Code : page no17 item no5.18.6 1102 20 No --- 22040 57 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 50-63 A DP Each 20 1102 22040

58 Item Code : page no17 item no5.18.7 1717 6 No --- 10302 58 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 6-32 A TPN Each 6 1717 10302

59 Item Code : page no18 item no5.18.9 3088 10 No --- 30880 59 Supplying & fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ONorOFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring asrequired confirming to IEC 60898. 50-63 A TPN Each 10 3088 30880

60 Item Code : page no36 item no8.3 44 100 No --- 4400 60 Supplying and drawing PVC insulated gas injected physicalfoam jelly flooded co-axial TV cable.RG-6. Mtr 100 44 4400

61 Item Code : page no14 item no5.6.6 326.13 4 No --- 1304.52 61 Supply and fixing polished wood board made of not lessthan 15mm thick plank on both sides of not more than 2pieces and fixing the same to the wall using tapered invertedwooden plugs screws. 20" x 20" x 2.5" Each 4 326.13 1304.52

62 Item Code : page no57 item no13.18.2 447 1 No --- 447 62 Fixing of ..... A TPST or change over switch or Contactor alongwith neutral link with screws, bolts, nuts and wiring usingrequired capacity wires and circuit labelling. 100A to 250A TPST Each 1 447 447

63 Item Code : page no18 item no5.20.8 5147 2 No --- 10294 63 PANEL BOARD Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240or450V upto 300mA sensitivity on existing woodor panel board.. 32-40 A 4 pole Each 2 5147 10294

64 Item Code : page no17 item no5.15.14 21424 2 No --- 42848 64 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism FOUR POLE 200 A 36 kA Each 2 21424 42848

65 Item Code : page no17 item no5.15.15 23545 1 No --- 23545 65 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have EarthFault as per IS-13947. (Icu=100percent lcs). In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between frontcover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism FOUR POLE 250 A 36 kA Each 1 23545 23545

66 Item Code : page no18 item no5.20.1 4277 2 No --- 8554 66 Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240or450V upto 300mA sensitivity on existingwoodorpanel board. 16-25 A 2 pole Each 2 4277 8554

67 Item Code : page no18 item no5.20.4 4559 2 No --- 9118 67 Supplying, fixing and wiring Earth Leakage Miniature CircuitBreaker (ELMCB) 240or450V upto 300mA sensitivity on existingwoodorpanel board. 32-40 A 2 pole Each 2 4559 9118

68 Item Code : page no20 item no5.40.1 2465 6 No --- 14790 68 Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips Rmtr 6 2465 14790

69 Item Code : page no20 item no5.40.2 3435 4 No --- 13740 69 Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips Rmtr 4 3435 13740

70 Item Code : page no20 item no5.40.3 4445 2 No --- 8890 70 Supplying ......... A rated 3phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolicorFRPorDMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips Rmtr 2 4445 8890

71 Item Code : page no20 item no5.42.2 0.43 310000 No --- 133300 71 Fabricating supplying and mounting MS box made out....SWG suitable for floor orwall mounting, fully weather proofwith provision for better heat dissipation, provided withhinged front cover, equipped with tamper proof lockingarrangements, with suitable size clA with necessary cableentry pipe with gland and box should be finished with7tanks treatment with powder coated paint and finally finishedwith approved colour etc., complete. 16 SWG Sq CM 310000 0.43 133300

72 Item Code : page no20 item no5.41.2 395 8 No --- 3160 72 Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint. 50 x 50 x 6 mm Rmtr 8 395 3160

73 Item Code : page no20 item no5.41.4 756 4 No --- 3024 73 Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint. 50 x 100 x 50 x 6 mm C channel Rmtr 4 756 3024

74 Item Code : page no18 item no5.21 9255 2 No --- 18510 74 Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50 HzAC with latest microcontroller based, digital readout ofpercentage leakage current, programmable delayorautoormanual reset facility suitable to mount on DIN railor flushmounting on panel board. Each 2 9255 18510

75 Item Code : page no19 item no5.27 200 2 No --- 400 75 Supplying, fixing and wiring rotary selector switch suitablefor Ammeter Each 2 200 400

76 Item Code : page no19 item no5.28 160 2 No --- 320 76 Supplying, fixing and wiring rotary selector switch suitablefor Voltmeter Each 2 160 320

77 Item Code : page no19 item no5.29 1425 2 No --- 2850 77 Supplying, fixing and wiring 3 Phase Digital Ammeter orVoltmeter Each 2 1425 2850

78 Item Code : page no19 item no5.38 515 6 No --- 3090 78 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230or440VAC. 50 Hz 12or24V D.C. Each 6 515 3090

79 Item Code : page no16 item no5.13.3 5950 2 No --- 11900 79 Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 60 to 70 A Each 2 5950 11900

80 Item Code : page no21 item no5.47 2315 2 No --- 4630 80 Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nutsand washers etc.,.) 3-120sec setting. Each 2 2315 4630

81 Item Code : page no43 item no11.3.2 690 150 No --- 103500 81 LED LIGHT FITTINGS Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70percent lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50or60Hz & Power factor greater than0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 20or22 W Each 150 690 103500

82 Item Code : page no43 item no11.3.3 1269 110 No --- 139590 82 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70percent lumen maintenance with CRI greater than 80. PowerInput: 220-240V@ 50or60Hz & Power factor greater than0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition. LED light fitting 1 x 4' - 36or40 W Each 110 1269 139590

83 Item Code : page no44 item no11.4.3 1671 4 No --- 6684 83 Supplying of recess mounting non integrated type LEDdown light...... W luminaire comprising of pressure decastorextruded aluminium housing, with spring loaded false ceilingclA, LED of PowerorCOB with CCT 6500 degree K, CRIgreater than70percent. efficacy greater than100 lumen per W, 120degree beam spread,lifegreater than 25000 burning hours and Compliance to IS10322orIEC60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF greater than 0.95, power lossshouldLess than 5percent of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20percent,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABLorCPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standardelectrical condition. 15-18W Nos 4 1671 6684

84 Item Code : page no45 item no11.6.3 4553 20 No --- 91060 84 LED modular down light 2'x2' or1'x4' 34-36 W Nos 20 4553 91060

85 Item Code : page no45 item no11.6.4 4861 18 No --- 87498 85 LED modular down light 2'x2' or1'x4'42-55 W Nos 18 4861 87498

86 Item Code : page no30 item no6.4.1 2677 115 No --- 307855 86 Supplying of Ceiling Fan with Capacitor rating As perguideline of BEE 5 star rating and IS:374or79 and alsoCEILING FAN or EXHAUST FAN comply with IS: 1709or1984 with latest amendment, Ratedvoltage 220 Vor50 Hz, Rated power input 48 W +or- 10 percent,Rated current As per IS:374or79, Rated power factor 0.9lagging(min), Rated speed 350 +or- 10percent RPM, Rated airdelivery 210 +or- 10percent Cubic Meter Minimum, Rated servicevalue 4.2 CMM or W, Three Blades of blade leaf 1.05 mm thickAluminium Alloy sheet, Class B motor insulation, Bearing Twoball bearings, Top 6202, Bottom 6201, as per IS specification,Motor winding. Temp rise Shall not exceed 75 deg C over andambient of 40 0C by resistance method at 245 V, Insulationresistance Shall not be less than Two Mega Ohms (2M Ohms),Leakage current Should not exceed 210 Micro Amp, Powerinput, W& current, Air Delivery & Fan Speed as perIS:374or1979 with latest amendment, 2 year manufacturerWarranty. 48" Sweep 5 Star (1200 mm) Each 115 2677 307855

87 Item Code : page no57 item no13.12 197 115 No --- 22655 87 Extra length of GI pipe of class B 19mm dia for down rod. Each 115 197 22655

88 Item Code : page no30 item no6.2.2 4446 20 No --- 88920 88 Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) Each 20 4446 88920

89 Item Code : page no34 item no7.1.3 10242 2 No --- 20484 89 GEASERS Supplying.....litres capacity verticalorhorizontal type wallmounting Electrical water heater with 22 SWG copperorSS sheetmetal inner Container tinned inside and anticorrosive paintoutside and 20 SWG M.S. sheet metal outer cover filled withglass wool between inner and outer container for thermalinsulation complete. The inlet and outlet pipes so arranged thatwater flow inside results in water to flow out from the innercontainer without turbulence. The Inner container shall havedirect immersion type copper tube nickel plate. 2kW capacityelement with a neon indicator fitted with 20A capacity 25 to 85degree Centigrade range thermostat. The water heater shallcompletely be wired with 40or0.0076 inch 3 core copper flexiblewire of 1.5 meters length and the outer container provided withheavy gauge brackets for wall mounting. 25 L Each 2 10242 20484

90 Item Code : page no56 item no13.7.1 122 260 No --- 31720 90 FIXING CHARGES Fixing all types and all capacities of fluorescent orfalse ceiling orspot light or CFL or LED fittings indoor on the wallor ceiling orrafters or girders using 23or0.0076" twin twisted PVC insulatedwires, required Nos of round blocks and clA. On wallor ceiling or Rafter or Girders Nos 260 122 31720

91 Item Code : page no58 item no13.19 490 38 No --- 18620 91 Fixing all types and all capacities of 1'x4' or 2'x2' LED Lightfittings indoor on the wall or ceiling or rafters or girders withnecessary supporting frame, using 2310.0076" twin twistedPVC insulated wires, required Nos of round blocks and clA. LED modular down light 2'x2'-36 watts or2'x2'-55 watts Nos 38 490 18620

92 Item Code : page no57 item no13.1 171 115 No --- 19665 92 Fixing a ceiling or Wall mounting fan of all capacities and alltypes to the existing 'S'' hook with fan regulator to the existingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 or 0.0076 inch PVC insulated twintwisted copper wire and wiring. Each 115 171 19665

93 Item Code : page no57 item no13.14 492 20 No --- 9840 93 Fixing one exhaust fan in the nitch already left in the wall withbolts and nuts and 5 A. ceiling rose with sufficient length of23or0.0076 inch PVC insulated twin core wire. Each 20 492 9840

94 Item Code : page no57 item no13.15.1 664 2 No --- 1328 94 Erection charges for fixing a ... litres capacity wall mountingelectric geysers using bolts, flat at one end nut and washers atthe other end for through bolts and nuts and washers with150x450x600mm back plate and wiring complete with 15A 3pin top. UPTO 30LITERS Each 2 664 1328

95 Item Code : page no31 item no6.7.2 47863 2 No --- 95726 95 AC'S Supplying ......TR split Air conditioners suitable for operationon AorC supply single phase 50 Hz 230 V with hermeticallysealed compressor with air cooled condenser, motor capacitorand start run capacitors, relay and over load protector internalunit, with one indoor and one outdoor unit The condenser unitwill be placed outside the room on the terrace to avoid noiseincluding standard length of suitable size copper tubingcovered with insulation tube. (High wall chordedorcordless)suitable capacity 3 core sheathedor PVC copper cable and abattery operated wireless remote unit 1.5 Ton capacity Each 2 47863 95726

96 Item Code : page no31 item no6.7.3 54048 3 No --- 162144 96 AC'S Supplying ......TR split Air conditioners suitable for operationon AorC supply single phase 50 Hz 230 V with hermeticallysealed compressor with air cooled condenser, motor capacitorand start run capacitors, relay and over load protector internalunit, with one indoor and one outdoor unit The condenser unitwill be placed outside the room on the terrace to avoid noiseincluding standard length of suitable size copper tubingcovered with insulation tube. (High wall chordedorcordless)suitable capacity 3 core sheathedor PVC copper cable and abattery operated wireless remote unit 1.5 Ton capacity 2 Ton capacity Each 3 54048 162144

97 Item Code : page no32 item no6.12 3175 5 No --- 15875 97 Installation charges for split type air conditioner with alliedworks for one indoor and one outdoor unit is to be mounted onsuitable Angle Iron support upto 3.0 Ton splitorcassette typeAorC. Each 5 3175 15875

98 Item Code : page no32 item no6.13.1 1549 100 No --- 154900 98 Supplying and installation of insulated refrigerant copper tubing of 5or8" and 3or8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional pipinglength of tube. Split Mtr 100 1549 154900

99 Item Code : page no32 item no6.22 4807 5 No --- 24035 99 Extra for Fabrication supply and fixing of Stand fabricatedusing slotted angle orL angle of size 6mm x 50mm for mountingout doororindoor A.C. unitor Batteries Each 5 4807 24035

100 Item Code : page no38 item no9.1.2 4792 2 No --- 9584 100 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 4kVA Capacity Each 2 4792 9584

101 Item Code : page no38 item no9.1.3 9666 3 No --- 28998 101 Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete. 5kVA Capacity Each 3 9666 28998

102 Item Code : page no13 item no32.09 154062 0.13 No --- 20028.06 102 LTorUG CABLE 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 35 Sqmm, 3.5 Core, (14 GI Strips - 4 x 0.8 mm) Km 0.13 154062 20028.06

103 Item Code : page no13 item no32.11 178973 0.11 No --- 19687.03 103 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner SeathArmoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 0.11 178973 19687.03

104 Item Code : page no52 item no21.06 31139 0.24 No --- 7473.36 104 LTorUG CABLE LABOUR CHARGES Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm Mtr 0.24 31139 7473.36

105 Item Code : page no28 item no63.02 95 20 No --- 1900 105 CABLE GLANDS Brass Cable Gland - 32 mm Each 20 95 1900

106 Item Code : page no28 item no63.04 197 32 No --- 6304 106 Brass Cable Gland - 45 mm Each 32 197 6304

107 Item Code : page no3 item no1.8.2 35 150 No --- 5250 107 CASING CAP'S Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. - 25 mm Mtr 150 35 5250

108 Item Code : page no3 item no1.8.3 43 180 No --- 7740 108 Supplying and fixing of PVC casing and capping on the wall orceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required. - 30mm Mtr 180 43 7740

109 Item Code : page no43 item no6.18.2 15 210 No --- 3150 109 Supplying and running GIorCopper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttasorspacers etc., - I) GI Wire b) 10 SWG including cost and conveyance of all materials, labour, HOM of equipments, all lead and lift and all other incidental charges etc., complete as per standard technical specifications and as directed by the Engineer-in-charge of the work. Mtr 210 15 3150

110 Item Code : page no73 item no15.36 9500 2 No --- 19000 110 Fire Extinguisher Providing 6.5 kg C02 Gas val ve type Fire Extinugisher, Trolley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 30.5 kg empty Weight 24.0 kg Can Height 1015 mm Diameter 140 mm, Discharge Time less than 13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 348, Can Construction : Hot spinningorForging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5 mm lSI Approved, 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete Each 2 9500 19000

111 Item Code : page no73 item no15.35 8500 2 No --- 17000 111 Providing 4.5 kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2Easy Weight Management used Unused Mechanism, Squeeze Grip,Gross Weight 19.1 kg empty Weight 14.6 kg Can Height 860 mmDiameter 140 mm, Discharge Time less than13 Sees, Controllabledischarge mechanism, Applicable on Class 8&C Fire, 8 Rating 138,Can Construction : Hot spinningorForging, Valve Construction : Forging& Machining, Internal Coating of Can : Not Applicable, External coatingof Can : Spray Painting, Sheet metal thickness : 4.5 mm lSI Approved,1Year Warranty. with instalert system with Superior quality EPDM RubberHosepipe etc., including cost of materials, labour, usage chargesof machinery complete as per specifications. complete Each 2 8500 17000

112 Item Code : page no93 item no15.111 1850 1 No --- 1850 112 Supplying of Four Bucket stands along with Buckets including cost and conveyance of all materials, labour, HOM of equipments, all lead and lift and all other incidental charges etc., complete as per standard technical specifications and as directed by the Engineer-in-charge of the work.(andexornewageorminimax) Each 1 1850 1850

113 Item Code : page no36 item no8.1 38 4800 No --- 182400 113 LAN CABLES (CAT-6) or TELEPHONE CABLES Supplying and drawing UTP-CAT 6E LAN cable. Mtr 4800 38 182400

114 Item Code : page no36 item no8.2.2 21 500 No --- 10500 114 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair Mtr 500 21 10500

115 Item Code : page no36 item no8.4.2 6977 2 No --- 13954 115 NETWORK RACKS Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 6U with 450mm depth Each 2 6977 13954

116 Item Code : page no36 item no8.4.4 8835 1 No --- 8835 116 NETWORK RACKS Supplying & Fixing of switch mounting rack with powermanager & Cable manager. 12U with 450mm depth Each 1 8835 8835

117 Item Code : page no36 item no8.9.1 48890 2 No --- 97780 117 Supplying fixing of Network Switches 48 Port Gigabyte (manageable) Each 2 48890 97780

118 Item Code : page no36 item no8.9.2 41450 1 No --- 41450 118 Supplying fixing of Network Switches 24 Port Gigabyte (manageable) Each 1 41450 41450

119 Item Code : page no36 item no8.9.4 15000 2 No --- 30000 119 Supplying fixing of Network Switches 48 port 10or100 Switch Each 2 15000 30000

120 Item Code : page no36 item no8.9.5 4700 1 No --- 4700 120 Supplying fixing of Network Switches 24 port 10or100 Switch Each 1 4700 4700

121 Item Code : page no37 item no8.11.2 257 22 No --- 5654 121 Supplying & Fixing of …mtrs Cat Patch Cable 2mtr m 22 257 5654

122 Item Code : page no37 item no8.11.3 331 18 No --- 5958 122 Supplying & Fixing of …mtrs Cat Patch Cable 3mtr m 18 331 5958

123 Item Code : page no37 item no8.12.1 14120 2 No --- 28240 123 Supplying & Fixing of Patch panel for LAN cabling 48 Port 10or100 patch panel No 2 14120 28240

124 Item Code : page no37 item no8.12.2 4100 1 No --- 4100 124 Supplying & Fixing of Patch panel for LAN cabling 24 Port 10or100 patch panel No 1 4100 4100

125 Item Code : page no38 item no9.2.5 39898 1 No --- 39898 125 UPS AND BATTERIES Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, AorC supply, with all accessories complete and Excluding batteries and wiring complete. 5 kVA OFF LINE UPS No 1 39898 39898

126 Item Code : page no38 item no9.4.6 28187 6 No --- 169122 126 Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 150 AH capacity No 6 28187 169122

127 Item Code : page no247 item no21.1.1 25000 2 No --- 50000 127 Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anyR.O SYSTEM ( DRINKING WATER) situation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 25 LPH : Cabin Type Each 2 25000 50000

128 Item Code : page no247 item no21.1.2 44000 2 No --- 88000 128 Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anysituation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 50 LPH : Cabin Type Each 2 44000 88000

Water purification plants: Supplying, Installation and Commissioning ofautomatic Water purification plant (RO+UF) with all accessories piping,product water tank on single phase power supply as per the encloseddetailed Technical Specifications including cost of material, loadingand unloading and as directed by the Engineer in charge. (Ref- detailedspecification enclosed seperatly). Note:- 1.The above rates mentionedare only for the preparation of estimate purpose. 2. All items are tobe of BSI orNFS standards,with BSI or NFS mark . 3. Tenders to beinvited for procurement. 4. No direct payment should be made under anysituation or condition or on any account. 5. After commissioning of plantnecessary testing to be done for the satisfactory of Engineer Incharge.Note : Refer the ANNEXURE : F for Detailed Specification ofEach components For 50 LPH : Cabin Type

Sl Item Unit Qty Rate Amount

1 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 2615 2774.25 22 61033.5 1 Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 22 2774.25 61033.5

2 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 858 910.25 65 59166.25 2 Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 65 910.25 59166.25

3 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 4884 5181.44 12 62177.28 3 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each 12 5181.44 62177.28

4 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 5977 6341 13 82433 4 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid each 13 6341 82433

5 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 4454 4725.25 5 23626.25 5 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 5 4725.25 23626.25

6 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 2866 3040.54 22 66891.88 6 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps each 22 3040.54 66891.88

7 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 1423 1509.66 16 24154.56 7 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. each 16 1509.66 24154.56

8 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 2835 3007.65 13 39099.45 8 Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 13 3007.65 39099.450000000004

9 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 2121 2250.17 22 49503.74 9 Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 22 2250.17 49503.740000000005

10 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 7494 7950.38 22 174908.36 10 Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium No. 22 7950.38 174908.36000000002

11 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 3 1018 1080 22 23760 11 Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 22 1080 23760

12 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 379 402.08 165 66343.2 12 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes m 165 402.08 66343.2

13 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 477 506.05 110 55665.5 13 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 25 mm nominal dia pipes m 110 506.05 55665.5

14 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 372 394.65 110 43411.5 14 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 32 mm nominal dia Pipes m 110 394.65 43411.5

15 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 721 764.91 150 114736.5 15 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 50 mm nominal dia Pipes m 150 764.91 114736.5

16 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 855 907.07 6 5442.42 16 Providing and fixing brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore No. 6 907.07 5442.42

17 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 91 96.54 16 1544.64 17 Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 20 mm nominal bore No. 16 96.54 1544.64

18 Category : Vol - 5 -Chapter -10- PVC PIPE WORKS --- 411 411 458.8 188566.8 18 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 458.8 411 188566.80000000002

19 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 3 291 308.72 226.8 70017.7 19 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter m 226.8 308.72 70017.69600000001

Providing, supplying, fixing of Bib Cock including transportation, labour charges with all lead lift loading & unloading and incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 1 Providing, supplying, fixing of Bib Cock including transportation, labour charges with all lead lift loading & unloading and incidental charges etc., complete MR - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Each 32 2350 75200

Providing and fixing SS Grating 125mm dia - Round 0f VIKING fitting complete, including teflon with fixing. - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. 2 Providing and fixing SS Grating 125mm dia - Round 0f VIKING fitting complete, including teflon with fixing. - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work. Each 68 260 17680

Providing and fixing CP. Health faucet with flexible hose, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete. Make : " - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work 3 Providing and fixing CP. Health faucet with flexible hose, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete. Make : " - including cost of all materials, labor, HOM, L & UL, curing with all leads and lifts etc. complete as per specifications & as directed by Engineer-in-charge of the work Each 13 1665 21645

Sl Item Unit Qty Rate Amount

1 Item Code : 39.13.1 8140 36.52 No --- 297272.8 1 Providing and fixing Wooden Platform : Made out of teak wood of section 50x50mm of legs, 50x50mm for horizontals both at suitable intervals from the point of view of stability, the top of the platform covered with commercial block board of 25mm thick, all sides covered with 6mm thick one side teak plywood fixed firmly to the platform including joining the wooden sections properly using nails/ screws, fevicol including cost of wood, nails/screws, fevicol, cost of painting/polishing, labour, all lead and lift, cost of any incidental charges etc.(Rate Per Sq.Mtr) Sqm 36.52 8140 297272.80000000005

2 Item Code : 39.13.3 199800 2 No --- 399600 2 Teak Wood Horse Shoe Table : Of size overall Length 16'. L-12' x Width 2' or 2.5'x Height 2.5' =2 Nos. & 4' one "U" shape Table, such that when three table joined together and make one Horse shoe table. Leg size 2.5"x2.5" turning legs. Table upper portion patti of 4"x1.25" and bottom patti 2"x1.5". Top should be OST covered with Green cloth on top and front portion. Top should be provided with 8mm glass with Diamond polish. The Table shall be neatly finished and polished. No 2 199800 399600

3 Item Code : 39.13.4 43920 2 No --- 87840 3 Teak Wood Witness Box : Length 4'xWidth 2.5'xHeight 4', made out of Teak wood legs (turning) size 4"x4" with side bars 3"x2". The Height from the ground shall be 6" with 18mm OST . Back Jungle wood support. All the sides shall be covered by 2"x2" reapers with suitable gap in between. The Witness Box shall be neatly finished and polished. Witness Box No 2 43920 87840

4 Item Code : 39.13.5 71980 2 No --- 143960 4 Teak Wood Accused Dock : Of size Length 8'xwidth 3'xHeight 4' with wooden platform. Made out of Teak wood leg size 4"x4". Side bars shall be 2"x2" . All the side shall be covered with 2"x1" reapers with suitable gap in between. A side door shall also be provided with locking device. The height of the Accused Dock from the ground shall be 6". The Accused Dock shall be neatly finished and polished. Accused Box No 2 71980 143960

5 Item Code : 39.13.5 21980 2 No --- 43960 5 Teak Wood Easy Chair : Made out of Teak Wood Front legs of size 3"x3", back legs of size 4"x2", side patties should be in curved shape of size 6"x1.25". Handle should be of size 2.5'x4"x1.25" on either sides. When opened becomes 5' in length. Chair head side patti of size 2"x6"x1.25". Seat and back covered with Teak Wood with cane or batten of size 1.25"x0.75". Judge Chamber No 2 21980 43960

6 Item Code : 39.15.2 15820 19 No --- 300580 6 Computer Work Station : of size 4' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB. Each work station should be of size 3'x2'. (W xD) and should be closed on three sides with 18mm thick 3.5' height or 4' verticals and back. Each work station should have provision for Keyboard, CPU and 3 drawers to be provided on right side. No 19 15820 300580

7 Item Code : 39.3 22596 100.8 No --- 2277676.8 7 Wardrobe : Made out of 18mm OSR PLPB (good quality)/Ply with lamination. (One side raw Prelaminated particle board) on three sides and back of 12mm PLPB. Inner design should have drawers in the center with lock. Top 3 ft should be open with 1 hanger rod. Bottom portion should have 1 shelf. Exterior to be finished with laminate/ veneer as per requirement. (Rate per Sq feet) All office Sqm 100.8 22596 2277676.8

8 Item Code : KSFIC.T 52 44300 10 No --- 443000 8 Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet with shelf. Table 3 side closed with OST pre laminated sheet 12mm thickness. Complete with all accessories like 2 locks and handles with polish. Table shall be neatly finished and polished. For top 6mm Plain glass with Diamond polish. No 10 44300 443000

9 Item Code : KSFIC.T 54 41860 2 No --- 83720 9 Teak Wood Officer Table : (Accounts Officer Table) Of size 7'x3'x30". Made out of 2.25"x2.25" Teak Wood legs. Table upper side patti 4"x1.25" and lower side 2"x1.25" and 12mm Commercial ply with 1mm laminate wherever visible. Table to have one drawer and one cupboard on either side. Along with one Key board. Doors and Drawers to be provided with SS handles and good quality locks and channels. Each 2 41860 83720

10 Item Code : KSFIC.T 57 62500 14 No --- 875000 10 Mediation Room Table (Size 2.5 m X w 0.9 X 40.75 Mtrs) : Amins, Records, APP, Library, Lady Advocate's Table of size L-2.50m x W -0.9 x H -0.75mtrs, with Drawers and cupboard on both sides. 18mm PLPB/Plywood with 1 mm laminated wherever visible, with Teak Wood edge beading for top. Each 14 62500 875000

11 Item Code : KSFIC.T 85 9100 25 No --- 227500 11 Teak Wood Dias Reiling :- Made out of 3"x3" turning legs, affixed together in 2"x1" patti at top & bottom maintaining a distance of 12" between every leg. Further finished with 3"x1.5" pattis on top and bottom, such that the flat surface is seen above. To be fixed on site with necessary screws, embeded in the floor. (Per Running Meter ) m 25 9100 227500

12 Item Code : KSFIC.T 88 23100 2 No --- 46200 12 Teak Wood Ornamental Chair with Lobo : Made out of Teak Wood, Rear leg of height 4'6" and 2.5"x1.5" section and front leg of height 18" with 2.5"x2.5" section with lathe. Seat frame of size 3"x1.5" with bottom 'H' type supports for legs. Seat and back to be made out of 32 density foam with cloth. The carms and the back to be shaped as per deisgn. Chair shall be neatly finished and polished. Each 2 23100 46200

13 Item Code : KSFIC.T 91 27200 32 No --- 870400 13 Teak Wood Bench With Back : Size : 182.88cm L x 46cm W x 96cm H Legs 4.4 x 4.44cm. Patties at top and bottom around 5.68 x 2.54cm in section and polished seat shall be provided with 18mm block board with laminated sheet on the top of the Block board. Back with Teak wood patti. Each 32 27200 870400

14 Item Code : KSFIC.T 94 12600 63 No --- 793800 14 Director Cushion Chair: High back chair with seat and back High quality feather touch Rexine. Arms with cushioning. Chair to have SS base with 5 Caster wheel legs along with Syncro Mechanisum. Each 63 12600 793800

15 Item Code : KSFIC.T 96 17980 20 No --- 359600 15 High Back Cushion Chair :- High back Chair with seat and back high quality feather touch Rexin. Arms with cushioning. Chair to have 5 caster wheel legs with Syncro Mechanisum. Each 20 17980 359600

16 Item Code : PWD UNI SR 2023-24vol no KSFIC Page no 8 Item no 9980 68 No --- 678640 16 Teak Wood Chair (Heavy Model) : Seat with Teak wood planks or cushion. Made out ofTeak wood Chair 3”x1 ¾ ” back legs 2 X 2 front Legs Chair side bars 3x1backwith 8 reapers. Chair size standard size. Chair shall be neatly finished and polished Each 68 9980 678640

17 Item Code : KSFIC.T 103 33340 8 No --- 266720 17 Book Rack with glass : Of size 6'x3'x18". Made out of 18mm thick black board with 3 shelves laminated glass sheters, Inner side paint. Outer surface polish. Each 8 33340 266720

18 Item Code : KSFIC.T 75 19900 1 No --- 19900 18 Psudium : Made out of black boards with laminated top of size 4' X 16" X 2' with teak wood beading, outer surface design veneer inner side paint. Each 1 19900 19900

19 Item Code : KSFIC.T 76 19800 6 No --- 118800 19 Notice Board : Of size 5'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outerside laminated sheet or veneer with polish, inner side paint or polish. Each 6 19800 118800

20 Item Code : KSFIC.T 2 96780 2 No --- 193560 20 Teak Wood Damaru Sofa Set : 1+3+1 with teapoy and cushion, front and back 4"x4" with turning. Sofa side bars 3.5'x1.25". Handle support patti 4"x1.25" and 2"x3", handle 6"x1.25". Seat and back support patti 2.5"x1.25". Sofa set shall be neatly finished and polished. Each 2 96780 193560

21 Item Code : KSFIC.DWD -93 4840 109.88 No --- 531819.2 21 Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provided suitable vertical support of 36mm Plywood. Table shall be provided with Footrest with suitable mm Plywood. Table Inner side shall be polish or paint. ( Rate per running ft.).KSFIC.DWD -93 Rft 109.88 4840 531819.2

22 Item Code : KSFIC.T -68 (2020-21) 7380 5.81 No --- 42877.8 22 KSFIC.T -68 (2020-21) Providing and fixing Veneer panelling over the 50mmX35mm Sal wood frame work and top coverd out of 4mm thick approved venner fixed over 12 mm ply finished in melamine polish ,complete including cost and conveyance of all material ,labour for all items of work HOM of equipment etc, complete as per specification ( Rate Per Sq Mtr ) Sqm 5.81 7380 42877.799999999996

Sl Item Unit Qty Rate Amount

1 Item Code : Data rate 8100 5 No --- 40500 1 Providing 6kg SPM-TEC Powder Based stored presure type melting point at 600-650 degree C, Applicable on Class D metal fires in Magnesium, Aluminium, Zinc, Sodium Potassium, Francium, Lithium, Cesium, Pressure Guage, Gross weight Gross Weight 9.4Kg, empty weight 3.4 Kg, Can Height 480 MM, Diameter 160 M M, Discharge Time less than 16 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, Can construction : Deep drawn & Co. , Mig welded, valve Construciton CE Approved : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60 M M, 5 years warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete" No 5 8100 40500

2 Item Code : data rate 6500 3 No --- 19500 2 Providing 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete" No 3 6500 19500

3 Item Code : data rate 11500 50 No --- 575000 3 Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle of scattered light sensor. The detector communicates with a fire detection control panel in loop technology via the loop RF interface. Two lithium batteries are accommodated in the detector base one as backup. The two coloured LED indicator with 360 visibility. Mechanical theft protection in the base. Radio transmission of 150 m (in free air), operating at delicensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25." No 50 11500 575000

4 Item Code : data rate 14000 3 No --- 42000 4 Addressable Wireless Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control panel, 32 selectable tone and adjustable sound level, maximum output volume @ 1M distance 100 dB(A), output tone frequency range 440 Hz to 2900 Hz, Visual alarm device output frequency 0.5 Hz, Approved by LPCB for EN 54-3 standard with Intelligent Sounder Interface Module radio-linked. Radio transmission of 150 m (in free air), operating at de-licensed frequency range of 865MHz all as specified and directed. Approval by IMQ for EN54-7 & EN54-25." No 3 14000 42000

5 Item Code : data rate 4900 3 No --- 14700 5 approvSupply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in minus 10 degree c to pluss 55 degree c temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Approval: VDS/UL/EN54. Make: Advanced (UK), Simplex, Notifier,Argus(Uk) No 3 4900 14700

6 Item Code : data rate 10500 5 No --- 52500 6 FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete Make : WINCO/NEW Age - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 5 10500 52500

7 Item Code : data rate 1500 2 No --- 3000 7 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work No 2 1500 3000

8 Item Code : data rate 4500 4 No --- 18000 8 Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 Make: WINCO/NEW AGE complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 4 4500 18000

9 Item Code : data rate 5000 12 No --- 60000 9 Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female Instantainious Gun metal coupling as per IS 903 WINCO/NEW AGE complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 12 5000 60000

10 Item Code : data rate 6500 4 No --- 26000 10 Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with locing arrangement and painted with two coats of Fire red Enamel paint at outer ise of the Box and two coats of white enamel paint at inner side of the box is to accomodated 2 Nos. of Fire hose box size 20”x24”x10” complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 4 6500 26000

11 Item Code : data rate 5100 3 No --- 15300 11 Supplying Installing, testing and commissioning of Hose reel cabin M.S.Pressed reel of 600mm dia swinging type motion which allows a 180 degree swing and conforms to IS:884/85. - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. No 3 5100 15300

12 Item Code : data rate 6000 4 No --- 24000 12 SupplyingInstalling,testingandcommissioningof19mmdia40.0mlengthhosewithrubberliningsmoothbore,reinforcedofnatural/syntheticfibres,arubbercoverfinishshallbesmooth,flutedorfabricmarkedwithminimumthicknessof1.50mmandtowithstandaworkingpressureof10Kgf/sqcmconfirms&testedasperIS444/IS12585includingcostofmaterials, labour, usage charges of machinery complete as per specifications No 4 6000 24000

13 Item Code : data rate 3900 80 No --- 312000 13 Supply, Installation testing and commissioning of approved make heavy quantity (Class ‘C’) confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. -do- 150 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 80 3900 312000

14 Item Code : data rate 4300 4 No --- 17200 14 Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 200 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 4 4300 17200

15 Item Code : data rate 2850 60 No --- 171000 15 Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 100 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 60 2850 171000

16 Item Code : data rate 2300 25 No --- 57500 16 Supply, Installation testing and commissioning of approved make heavy tubes (Class ‘C’) confirming to as per IS1239 Part - I (25mm Nominal bore 4.05mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore5.40mm thick @ 14.40 Kg/m,150mm Nominal bore 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc.-do- Galvanized Iron Pipes 80 mm dia. complete - etc., complete with all lead and lift as per the instructions of Engineer in charge of work. m 25 2300 57500