Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Qualified | Qualified MSE, MII, Category: General |
| 2 | Qualified B 1023 NATIONAL HIGH WAY KANSIPORA BARAMULLA KANSIPORA KANISPORA BARAMULLA JAMMU KASHMIR 193103 UDYAM JK 03 0001401 01AAFFH7641P1Z6 R M | BARAMULLA | JAMMU AND KASHMIR | 193103 | Qualified MSE, MII, Category: General |
| 3 | Qualified | Qualified MSE, MII, Category: General |
| 4 | Qualified | Qualified MSE, MII, Category: General |
| 5 | Qualified 204 MALIK RESIDENCY TANWAR NAGAR DAMMER CO ROAD CAUSA MUMBRA THANE MAHARASHTRA 400612 THANE MAHARASHTRA 400612 | THANE | MAHARASHTRA | 400612 | Qualified MSE, MII, Category: General |
Tender Value
₹2.5 Cr
EMD Value
₹5.0 L
Closing Date
31 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CONSTR IAIOS
4795480
GEM/2023/B/3473434
Two Packet Bid
Mesh Wire. Horizontal wire Dia 4.0 mm plus or minus 0.05mm Vertical wire Dia 4.0 mm plus or minus 0
90 days
Jammu And Kashmir; Baramulla, Jammu And Kashmir; Dungarpur
Total value wise evaluation
BOQ
8 documents required · 8 mandatory
3 yrs
₹3
30%
₹5.0 L
31 May 2023
21 May 2023
31 May 2023
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | Mesh Wire. Horizontal wire Dia 4.0 mm plus or minus 0.05mm Vertical wire Dia 4.0 mm plus or minus 0.05mm Mesh Size Mesh Size of 12.7 X 76.2 mm along Mesh | Mesh Wire Horizontal wire Dia 4.0 mm plus or minus 0.05mm. Vertical wire Dia 4.0 mm plus or minus 0.05mm Mesh Size. Mesh Size of 12.7 X 76.2 mm along Mesh Mesh Wire IS 280 2006. Panel size and Weight 2600X800mm 20.52 Kg. Coating Zinc coated 40 to 50 GSM and 60 to 80 microns of Powder coating Color RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength. Min 550 N per Sq.mm. Weld tensile strength Min 70 percentage of Wire tensile strength. Note. High Security Weldmesh is been installed at the bottom all as specified in PDF attached. | 240 | Nos | flowersepo | 90 |
| 2 | Mesh Wire. Horizontal wire Dia 5.0 mm plus or minus 0.05mm Vertical wire Dia 4.5 mm plus or minus 0.05mm Mesh Size Mesh Size of 50 X 100 mm along Mesh | Mesh Wire. Horizontal wire Dia 5.0 mm plus or minus 0.05mm. Vertical wire Dia 4.5 mm plus or minus 0.05mm. Mesh Size of 50 x 100 mm minus V Bend and 50X200 mm plus or minus 2 mm along Mesh Mesh Wire IS 280 2006. Panel size and Weight 2600X800 9.3 Kg. Coating Zinc coated 40 to 50GSM and 60 to 80 microns of Powder coating. Color RAL 6005. Powder coating should withstand 1000 Hours of salt spray test. Wire Tensile Strength Min 550 N per Sq.mm. Weld tensile strength Min 70 percentage of Wire tensile strength. Note Weldmesh is installed vertically above the High Security Weldmesh all as specified in PDF attached. | 480 | Nos | flowersepo | 90 |
| 3 | Weld Mesh Panels. Mesh Wire. Horizontal wire Dia 5.0 mm plus or minus 0.05mm Vertical wire Dia 4.5 mm plus or minus 0.05mm | Weld Mesh Panels. Mesh Wire Horizontal wire Dia 5.0 mm plus or minus 0.05mm. Vertical wire Dia 4.5 mm plus or minus 0.05mm Mesh Size. Mesh Size of 50 x 100 mm minus V Bend and 50X200 mm plus or minu 2 mm along Mesh as per dwg. Mesh Wire IS 280 2006. Panel size W and H and Weight Total plus or minus 5 percentage 2600X1000mm and 11.02 KG all as specified in PDF attached. | 240 | Nos | flowersepo | 90 |
| 4 | Punched Tape Concertina Coil 850 mm Dia 18 loops 3.5 mm core wire | Punched Tape Concertina Coil size 850 mm Dia 18 loops 3.5 mm core wire. Coil Diameter 850 mm plus or minus 50mm. Blade Profile Tear Blade Profile. Core Wire High Tensile 3.5 mm plus or minus 0.1mm Dia. Zinc coating Galvanised to min 275 GSM. Tensile Strength of Wire 1400 to 1500 N per sq.mm. Number of loops 18. Stretchable length 2.5 mtrs. Locking Clips 5 clips per set of loops. Weight 6.7 Kgs plus or minus 5 percentage all as specified in PDF attached. | 720 | Coils | flowersepo | 90 |
| 5 | Punched Tape Baby Concertina Coil including spike and handle with 50 turns and dia 610 mm | Punched Tape Baby Concertina Coil including spike and handle with 50 turns and dia 610 mm having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire 2.6 plus or minus 0.035 mm dia are electro galvanised to provide protection against outdoor exposure. The punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil steel clips total 70 Nos per coil equally spaced to connect the individual turns of the coil to each other so that it opens up like an accordion. The width of strip as 19 mm and spacing of blades 24.00 plus or minus 0.5 mm C per C all as specified in PDF attached. | 86 | Coils | flowersepo | 90 |
| 6 | Fence Post Type. Circular Hollow section Dimensions 89mm Dia 3 mm | Fence Post Type. Circular Hollow section Dimensions 89mm Dia 3 mm Thickness. All tolerances as per IS specn IS 1239. Length 3.4 mtrs. Weight 21.6 Kg. Coating Hot Dip glvanised to minimum 350 GSM all as specified in PDF attached. | 240 | Nos | flowersepo | 90 |
| 7 | Truss support Post with Rail end Cap. | Truss support Post with Rail end Cap. Type Circular Hollow section. Dimensions 76mm Dia 3 mm thickness. Rail End Cap Fitting 76 mm with Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism. Thickness All tolerances as per IS specn IS 1239. Truss support for across the slope condition. Length 1800mm and Weight 9.65 Kg all as specified in PDF attached. | 144 | Nos | flowersepo | 90 |
| 8 | Truss support Post with Rail end Cap. | Truss support Post with Rail end Cap. Type Circular Hollow section. Dimensions 76mm Dia 3 mm thickness. Rail End Cap Fitting 76 mm. Rail End Cap is fitted to Truss Support using M8X100 Nut and Bolt Mechanism. Thickness All tolerances as per IS specn IS 1239. Truss support for along the slope condition. Length 3100mm and Weight 16.6 Kg all as specified in PDF attached. | 96 | Nos | flowersepo | 90 |
| 9 | Straining Y Arm for supporting top PTCC | Straining Y Arm for supporting top PTCC. Material CHS of 76mm and 3.2mm guage as per IS 1852. Coating Hot dip galvanized to Min 350 GSM as per IS 4759 2629. Length of 1 Arm is 510 mm outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post and fixed with two Nos mushroom head bolt and nut. Straining Y Arm will manufactured as per drawing attached. Straining Y Arm will be installed at every 30 mtrs except intermediate arm post. | 20 | Nos | flowersepo | 90 |
| 10 | Intermediate Y Arm for supporting top PTCC | Intermediate Y Arm for supporting top PTCC. Material CHS of 48.3mm and 2.90mm guage as per IS 1852 Coating. Hot dip galvanized to Min 350 GSM as per IS 4759 and IS 2629. Length of 1 Arm is 510 MM. Angle between the two arms is 120 degree fixed with two Nos mushroom head bolt and nut. Intermediate Y Arm will manufactured as per drawing attached. Outer dia of 76 mm of sleeve cap will be fitted on the top of the fence post. One Intermediate Y Arm will be installed at every post except the posts with Straining Y arms all as specified in PDF attached. | 220 | Nos | flowersepo | 90 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_4795480.pdf
GEM_BID
pdfconstiaios_2023-05-21-13-07-34_5ea71d326bcbca03443a31073728d40a.pdf
BOQ
boq-iaios_2023-05-21-13-07-34_309518954183a003c0131283397921e5.csv
BOQ
CERT_3cdcea03-d0d5-4b4e-8a9d1684655949208_flowers39fdpk.docx
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .