COMPLETION OF INCOMPLETE WORKS FOR PROVISION OF WORK SERVICES FOR CONSTRUCTION OF MAIN GUARD ROOM AND DSC GUARD POST AND PERIMETER LIGHTING AT MUKKUNNIMALA AT TRIVANDRUM

Amount

GENERAL SUMMARY (Note : Schedule 'A' Part I to IX are prepriced by MES unser Ser No. 2 to 10.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only)

Lump sum price worked out by the contractor for “BUILDING WORKS ” as listed in Sch ‘A’ Part I representing **___________%____________________________ only) *above / below the lump sum price of Rs 7110725.00 inserted by MES for Schedule ‘A’ Part I .

Lump sum price worked out by the contractor for “SITE CLEARANCE ” as listed in Sch ‘A’ Part II representing **___________%____________________________ only) *above / below the lump sum price of Rs 1342194.05 inserted by MES for Schedule ‘A’ Part II .

Lump sum price worked out by the contractor for “INTERNAL WATER SUPPLY ” as listed in Sch ‘A’ Part III representing **___________%____________________________ only) *above / below the lump sum price of Rs 49179.80 inserted by MES for Schedule ‘A’ Part III .

Lump sum price worked out by the contractor for “(INTERNAL ELECTRIC SUPPLY) ” as listed in Sch ‘A’ Part IV representing **___________%____________________________ only) *above / below the lump sum price of Rs 113290.4 inserted by MES for Schedule ‘A’ Part IV .

Lump sum price worked out by the contractor for “ROAD/ PERIMETER PATH ” as listed in Sch ‘A’ Part V representing **___________%____________________________ only) *above / below the lump sum price of Rs 8062956.39 inserted by MES for Schedule ‘A’ Part V .

Lump sum price worked out by the contractor for “SEWAGE DISPOSAL” as listed in Sch ‘A’ Part VI representing **___________%____________________________ only) *above / below the lump sum price of Rs 528934.5 inserted by MES for Schedule ‘A’ Part VI .

Lump sum price worked out by the contractor for “RETAINING WALL ” as listed in Sch ‘A’ Part VII representing**___________%____________________________ only) *above / below the lump sum price of Rs 601523.65 inserted by MES for Schedule ‘A’ Part VII .

Lump sum price worked out by the contractor for “EXTERNAL WATER SUPPLY ” as listed in Sch ‘A’ Part VIII representing **___________%____________________________ only) *above / below the lump sum price of Rs 273099.12 inserted by MES for Schedule ‘A’ Part VIII .

Lump sum price worked out by the contractor for “EXTERNAL ELECTRIC SUPPLY ” as listed in Sch ‘A’ Part IX representing **___________%____________________________ only) *above / below the lump sum price of Rs 1942995.45 inserted by MES for Schedule ‘A’ Part IX .

Sch 'A' Part- X - FITTINGS , FIXTURES & MISCELLANEOUS ITEMS (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6)

Supply and fix angle cock cast copper alloy with capstan head chromium plated screwed both ends for PP-R pipes or for unions and fixed suitable for 20mm dia.

Supply and fix Health faucet cock (for two in one) brass chromium plated 20mm bore including 1m long flexible pipe.

Brooming down plastered/unplastered surfaces of new or old work, preparing old decorated surfaces/ plastered surfaces spoiled by smoke/oil/algae/rain water marks by scraping using steel wire brushes and washing with water and complete removal

Point wiring with 4.0 sqmm single core PVC insulated FRLS cable 1100 volts grade with copper conductor draw through and non metallic rigid PVC conduit and all conduit accessories ( concealed) and including provision of 4.0sqmm PVC insulated copper cable FRLS as earth continuity conductor fabricated steel terminal box made out of 1.22mm thick MS sheet concealed in walls with 3mm thick bakelite sheet ISI marked top cover with brass screws and cup washers for housing one 3 pin socket outlet 15amps all as specified and as directed.

Sub main wiring complete with two runs of 4.0 sqmm single core PVC insulated FRLS 1100 volts grade, multistranded copper conductor cable with one run of 4.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metalic PVC rigid conduit and conduit accessories(surface on walls/ floor etc. ) all as specified and as directed. (For Flood lights/search lights). Note: 2 runs of FRLS cable, one run of copper conductor cable and one run of 25mm dia PVC rigid conduit shall be measured as one running Metre/length.

Supply and fix new energy efficent LED integrated extruded polycarbonate housing fitting 1 x 20 watts 4 feet long LED white batten type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete. Make: Havells cat No.LUMILINEPLUSBS20WLED865SPCSS or Philips cat No. BN021C LED22S PSU CW GR or Wipro Cat No.LL20-281-XXX-65AL1

Supply and fix new energy efficent LED integrated extruded polycarbonate housing fitting 1 x 10 watts 2 feet long LED white batten type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete. Make: Havells cat No.LUMILINEPLUSBS10WLED865SPCSS or Philips cat No. BN021C LED12S PSU GR or Wipro Cat No.LL20-111-XXX-65NE3

supply and fix in repairs energy efficient LED building security light Fitting 20 Watts on existing backets including connection with twin coe flexible PVC 0.5 Sqmm cable complete all as secified and as directed as per Philips Model No. BRP042 P LED25 CWSLES1 PSU GR P 4210 or Havells Cat No ENDURAPEARLSL20WLED757SASYTOPCMP or Equivalant make.

S & F New High Power LED flood fitting to ensure uniform distribution with die cast aluminium IP 66 street light of capacity 70 W LED fittings with suitable fixing accessories all as specified and as directed. Make : Havells cat pt - JETAPROFL70WLED757LTG or equivalant make.

Supply and fix and connecting up ceiling fan of size 1200mm sweep complete with and including provision of cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3mm thick bakelite sheet cover including writing MES No 2cm height with synthetic enamel black paint all as directed. Make :HAVELLS : ES 50 or its equivalent make

Supply and fix Exhaust fan 300mm sweep heavy duty 900 RPM single phase 240 volts AC 50 Hz with louvers and connecting up with and including provision of cable 3 core of size 0.5 sqmm (16/0.2mm) from ceiling rose to fan including writing MES No.2 cm height with synthetic enamel black paint all as specified and as directed. Make: Havells Turbo force SP or its equivalent make.

Supply and fixing Wall mounting fan 400mm sweep heavy duty 1360/1400 RPM single phase 240 volts AC 50 Hz and connecting up complete including provision of cable 3 core of size 0.5sqmm (16/.2mm) from ceiling rose to fan including writing MES No.2cm height with synthetic enamel blak paint all as directed. Make: Havells Aindrilla premium or equivalant. Note for item No.17 to 23: Existing wiring made for light, fan, and sockets to be tested and charged before fixing of light fittings & Fixtures.

Material and labour Rigid non metallic PVC conduit of 25mm dia with all accessories complete consealed in walls for Flood light system all as specified and as directed.

Supply, fixing and connecting up complete MCB DB TPN 4 way , vertical, double door, 415 V, AC, 50 Hz, IP-42 protection conforming to IS-13032 universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc complete with provision for MCB TPN as incomer and SP/DP MCBs as outgoing. Make: Havell's Cat No.DHDLVDRWGOF004 or its equivalent make as listed in Annexure here-in-after.

Earthing complete with GI earth plate 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of the earth plate to a depth not less than 1.5 m below ground level, connected to and including GI wire 4 mm dia withGI protection pipe 15 mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanized iron medium grade 20 mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50 mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I .

Supply and fix MCB FP 6-32 Amps rating, 10 kA breaking capacity,'C' series, 415 V, 50 Hz AC supply. Make: Havell's Cat No. DHMGCFPF006-032 or its equivalent make as listed in Annexure here-in-after.

Supply and fix MCB SP 6-32Amps rating, 10 kA breaking capacity,'C' series, 240 V, 50 Hz AC supply. Make: Havell's Cat No. DHMGCSPF006-032 or its equivalent make as listed in Annexure here-in-after.

Supply and fix Siren conforming to IS 1941 with electric motor and able to deliver 143 DB noise level, electric operated 415 volts 3 phase 50 Hz, 5 Km range and fixed including necessary fixing arrangement, electrical connections, weather proof enclosure made out of MS angles/sheet/flat duly painted on the roof of building all as directed. Make: As listed in Annexure here-in -after.

External Water Supply : Cutting the existing GI pipe line in position and insert and including GI Tee 50x50x25 mm all as directed.

External Electric Supply : Supply and install transformer step down oil cooled copper wound out door type complete with standard fittings, HT11 KV 3 Phase, LT 433 Volts, 3 Phase 4 wire with off load tap changer on HT side to vary secondary voltage within limit, all as per IS 1180 Part I : 2014 and BEE certified of capacity 63 KVA mounted on plinth as per rules all as specified and as directed. Note: (i) Necessary plinth for transformer shall be measured and paid seperately vide relevant item of Sch 'A' Part - I. (ii) Make shall be as listed here-in-after.

Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6.0 mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including galvanised iron strip 32x6mm by means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrode and including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thick with 8mm dia TMT bars at 140mm C/C both ways, with lifting handle, watering pipe of GI medium grade 20mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified.

Supply and Fix Three core flexible cable 2.5 sqmm multi stranded copper conductor PVC insulated and sheathed cables to connect from industrial Plug socket to Search light fittings etc

Supplying, fixing ,testing and connecting High beam Search light 1X 400 W, MH type in stainless steel body cum reflector complete with toughened front glass, retaining ring, pilfer proof and captive bolting system, incorporated vibration isolators with and including 400 Watts MH lamp and control gear suitable for installation inside the watch towers cabin mounted on 01 Mtr Tripod stand with castrol wheels for 350' rotatable arrangement complete all as directed. Make: SIGMA Model No : 21301 or its equivalent make as listed in Annexure here-in-after.

Supply and fix MCCB FP 40 amps 415 volts ,16kA breaking capacity all as directed.

Supply and fix MCCB FP 63 amps 415 volts ,16kA breaking capacity all as directed.

Supply and fix MCCB FP 100 amps 415 volts ,16kA breaking capacity all as directed. Make for items 37 to 39: As per Annexure listed here-in-after.

Supply, install , test and commission of LT feeder pillar box loop in loop out , made out of 3 mm thick CRCA sheet dust and vermin proof of size 0.6 X0.4 X 0.3 M with weather proof canopy , front operated doors fitted with hinges consisting of bus bar chamber with aluminium bus bar of suitable capacity for three phases and neutral including MCCB FP 63 A - 1 No , glands and lugs for cable termination with powder coated, bottom channel of size 50x50x6 mm and necessary foundation & civil works all as directed .

Supply and fix cable route indicater oval shaped size 200X150X6 mm thick CI/MSwith letter embosed as HT/LT UG cable fixed on 25X25X6 mm MS angle iron of 50 cms long embeded in PCC (1:3:6) type C1 using 20 mm stone aggregate including two coats of blue colour synthetic enamel paint over a coat of Zinc chrome primer on exposed steel surface all as specified and as directed.

SS&F in all in one integrated Solar LED Street Light fitting 25 W capacity and 3000 Lumens. Solar Panel, battery and LED Light fitting in compact as single unit. Battery having backup upto 2 days complete with .The unit shall comprises of Battery 12 V Lithium ferro phosphate inbuilt12 V solar Panel module, Integrated MPPT Charger + Driver Aluminium Pressue diecast Housing , High efficiency PC cover with IP 65 Protection , Adjustable Tilt angle 0-15 degree and inbuilt motion sensor including Octagonal pole 5.0 Mtr long with Hot dip Galvanised finish Min 83 micron No of circumferential weld nil with mounting backet and fixing on ground using PCC complete as per Cat Part No.LR19-461-XXX-57-XX of Wipro or Equivalant Make

Supply and fixing Cable Junction box made out of polycarbonate material IP55/65 with metric knockouts for cable entry for 16/25 Sq mm cable size 200X160X8 mm including 1 No MCB 6 Amps with DIN bar and 4 Nos FRP insulators and fixing the box to street light pole made of 25x 3mm flat iron with clamps, nuts and bolts complete as per Cat No. K 9255 of Hensel or equivalent make all as specified and directed by Engineer-in-charge

S & F New High Power LED fitting to ensure uniform distribution with die cast aluminium IP 66 street light of capacity 70 W LED fittings with suitable fixing accessories all as specified and as directed. Make - Havells cat pt - ENDURCITYLINERNEOSL70WLED757PASYBOTG/ Wipro cat pt-LR02-671-XXX-57-G2 or Equivalant Make

Supply and fix street light bracket made out of 50mm bore GI pipe light grade bracket 1.2m long bent to shape fixed with clamps using 50x6mm flat iron for fixing of street light.

Wiring with PVC insulated 1100 volts grade multi stranded copper conductor sheathed cable 2 runs of 1.5 sqmm and one run of 1.5sqmm copper conductor cable from terminal box to street light fittings drawn through pole including fixing accessories all as directed. Note: 2 runs of 1.5 sqmm cable along with one run of 1.5sqmm copper conductor cable shall be measured as one length.

S & F New High Power LED flood fitting to ensure uniform distribution with die cast aluminium IP 66 street light of capacity 120 W LED fittings with suitable fixing accessories all as specified and as directed. Make : Wipro cat pt -LF20-132-060-57-G3 / Philips cat pt -BRP322 LED 138 CWHE NR PC S3XT/ Havells cat pt - JETAIRISFLS120WLED757APNBLTG

Supply, install, testing and commissioning of high mast system 15m height consisting and including necessary foundation and foundation bolts and following accessories: (i) Galvanised Octagonal Pole: Octagonal cross section and shall be continuously tapered with single longitudinal welding shafts provided with rigid flange plate poles shall have door of appx 500mm length at the elevation of 500mm from the base plate and flush with the pole with locking arrangement. (ii) High Mast System ; No. of sections 2, base dia 360mm with 4mm thick plate, top dia 150mm with 3mm thick plate, dia of base plate 520mm with 25mm thick. (iii) Lightning Protection: GI spike of length 1200. (iv) Luminaires Carriage : MS pipe 50 NB ERW class -B, 9 Arm welded. (v) Trailing Cable: EPR insulated PCP sheathed copper 9 core 2.5sqmm. (vi) Winch: SGDD type swl 350 kgs, operated by integral motor of 0.75 HP 6 pole single speed with mechanical tipping facility. (vii) Wire rope AISI 316 grade 7/16 construction 6mm dia. (viii) Aviation light fitting LED type double fitting including necessary electrical connections with bracket and suitable pipe with fixing arrangement at the top of high mast. Note: Light fittings shall be measured and paid seperately vide relevant item of BOQ. MAKE: Bajaj/Crompton & Greaves

Laying only, connecting up and feeding LT 1100 volts grade XLPE insulated, screened, PVC bedded, electric power cable (Heavy duty) galvanised steel strip armoured with stranded aluminium conductor, laid in trenches / ducts, fixed to wall / pole / inside panel, drawn through pipe including jointing Kit complete all as specified and as directed of following sizes: -

All as per item No 49 here-in-before but of 70 sqmm 3.5 core

All as per item No 49 here-in-before but of 50 sqmm 3.5 core

All as per item No 49 here-in-before but of 35 sqmm 3.5 core

All as per item No 49 here-in-before but of 25 sqmm 4.0 core

All as per item No 49 here-in-before but of 10 sqmm 4.0 core

All as per item No 49 here-in-before but of 6 sqmm 4.0 core. Note. For items 49.1 to 49.6 : (i) Necessary excavation, earthwork and conneced cable protection items shall be measured and paid seperately under relevant items of Sch 'A' Part-XI. (ii) Cables will be issued under Schedule 'B' free for laying only. (iii) Existing cable already laid is to be checked before charging and connecting with new cable.

Lucky Enterprises

SHAIJAL T M

Powertech Engineers