Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹76.7 L
EMD Value
₹76,664
Closing Date
28 Mar 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Renovation and Beautification of Steel Club, Sector-9, Rourkela.
NBCC/SBG/OD/CG/RSP/NIT/23-24/20
NBCC/SBG/OD/CG/RSP/NIT/23-24/20
Open Tender-Domestic
Civil Works General
Sundargarh, Odisha
₹2,950
₹76,664
28 Mar 2024
13 Mar 2024
28 Mar 2024
28 Mar 2024
2 Apr 2024
Providing and laying in position cement concrete of specified grade
4 4.1 excluding the cost of centering and shuttering - All work up to
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural
4.1.8 sources : 8 graded stone aggregate 40 mm nominal size derived Cum 65.21 6314.37 411773.88
from natural sources)
Providing and laying in position cement concrete of specified grade
6 4.1 excluding the cost of centering and shuttering - All work up to
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural
4.1.3 sources : 4 graded stone aggregate 20 mm nominal size derived Cum 58.20 7351.55 427860.21
from natural sources)
Providing and laying in position specified grade of reinforced
5 5.1 cement concrete, excluding the cost of centering, shuttering,
finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from
5.1.2 natural sources : 3 graded stone aggregate 20 mm nominal size Cum 20.93 8348.76 174711.91
derived from natural sources)
Reinforced cement concrete work in walls (any thickness),
including attached pilasters, buttresses, plinth and string courses,
6 5.2 fillets, columns, pillars, piers, abutments, posts and struts etc.
above plinth level up to floor five level, excluding cost of centering,
shuttering, finishing and reinforcement :
1:1 ½ :3 (1 cement : 1 ½ coarse sand (zone-III) derived from
5.2.2 natural sources : 3 graded stone aggregate 20 mm nominal size Cum 41.96 10166.24 426564.25
derived from natural sources).
7 5.9 Centering and shuttering including strutting, propping etc. and
removal of form for
5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 66.08 307.38 20311.67
5.9.5 Lintels, beams, plinth beams, girders, bressumers and Sqm 77.50 607.23 47060.33
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 141.70 802.77 113752.51
Steel reinforcement for R.C.C. work including straightening,
cutting, bending, placing in position and binding all complete upto
8 5.22/5.22A plinth level./ Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position and binding all
complete above plinth level
5.22.6/5.22 Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with clay flyash F.P.S. (non modular) brick of class
9 6.32 designation 7.5 in superstructure above plinth level up to floor five
6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 21.00 8175.77 171682.99
10 13.1 For thickness of tiles above 25 mm and up to 40 mm 0.00
11 13.2 15 mm cement plaster on the rough side of single or half brick wall
12 13.43 Applying one coat of water thinnable cement primer of approved
brand and manufacture on wall surface :
13.43.1 Water thinnable cement primer Sqm 170.00 64.33 10936.10
Wall painting with acrylic emulsion paint, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre, of approved
13 13.82 brand and manufacture, including applying additional coats
wherever required, to achieve even shade and colour.
14 13.61 Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :
13.61.1 Two or more coats on new work Sqm 500.00 131.20 65600.00
Digitally signed by Rakesh
“Renovation/Beautification of Steel Club, Sec-9 , ”under the work of Various Civil, Electrical, Water Supply, Horticulture,
Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).
SL No DSR/MR ITEM DESCRIPTION Unit Qty AMOUNT
Structural steel work riveted, bolted or welded in built up sections,
15 10.2 trusses and framed work, including cutting, hoisting, fixing in Kg 2500.00 111.75 279375.00
position and applying a priming coat of approved steel primer all
Providing and laying factory made chamfered edge Cement
Concrete paver blocks in footpath, parks, lawns, drive ways or light
traffic parking etc, of required strength, thickness & size/ shape,
made by table vibratory method using PU mould, laid in required
colour & pattern over 50mm thick compacted bed of sand,
16 16.91 compacting and proper embedding/laying of inter locking paver
blocks into the sand bedding layer through vibratory compaction
by using plate vibrator, filling the joints with sand and cutting of
paver blocks as per required size and pattern, finishing and
sweeping extra sand. complete all as per direction of Engineer-in-
16.91.1 60mm thick cement concrete paver block of M-35 grade with sqm 248.85 930.63 231587.28
approved colour, design & pattern.
Providing and applying integral crystalline slurry of hydrophilic in
nature for waterproofing treatment to the RCC structures like
retaining walls of the basement, water tanks, roof slabs, podiums,
reservior, sewage & water treatment plant, tunnels / subway and
bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and
3 : 1 (3 parts integral crystalline slurry : 1 part water) for
horizontal surfaces and applying the same from negative (internal)
17 22.23 side with the help of synthetic fiber brush. The material shall meet
the requirements as specified in ACI 212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control
concrete as per DIN 1048 and resistant to 16 bar hydrostatic
pressure on negative side. The crystalline slurry shall be capable of
self-healing of cracks up to a width of 0.50mm. The work shall be
carried out all complete as per specification and the direction of the
engineer-in-charge. The product performance shall carry guarantee
for 10 years against any leakage.
22.23.1 For vertical surface two coats @ 0.70 kg per sqm sqm 12.00 405.50 4866.00
22.23.2 For horizontal surface one coat @1.10 kg per sqm. sqm 2.50 310.93 777.33
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in all colours,
18 11.38 shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 423.41 1105.01 467866.76
mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing
the joints with white cement and matching pigments etc., complete
Providing and fixing Ist quality ceramic glazed wall tiles conforming
to IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle
green, black of any size as approved by Engineer-in-Charge, in
19 8.31 skirting, risers of steps and dados, over 12 mm thick bed of sqm 212.38 1061.48 225442.05
cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sqm, including pointing in white
cement mixed with pigment of matching shade complete
20 15.23 Dismantling tile work in floors and roofs laid in cement mortar
including stacking material within 50 metres lead.
15.23.2 For thickness of tiles above 25 mm and up to 40 mm sqm 3141.66 93.23 292896.50
Chequerred precast cement concrete tiles 22 mm thick in footpath
& courtyard, jointed with neat cement slurry mixed with pigment
21 11.20 to match the shade of tiles, including rubbing and cleaning etc.
complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4
11.20.1 Light shade pigment using white cement sqm 250.00 1230.78 307695.00
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with
22 18.8 one step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per
direction of Engineer in Charge. Concealed work, including cutting
chases and making good the walls etc.
18.8.1 15 mm nominal dia Pipes Metre 50.00 440.34 22017.00
18.8.2 20 mm nominal dia Pipes Metre 150.00 512.80 76920.00
23 18.49 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931 :
Digitally signed by Rakesh
“Renovation/Beautification of Steel Club, Sec-9 , ”under the work of Various Civil, Electrical, Water Supply, Horticulture,
Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).
SL No DSR/MR ITEM DESCRIPTION Unit Qty AMOUNT
24 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet
25 18.53 Providing and fixing C.P. brass angle valve for basin mixer and
geyser points of approved quality conforming to IS:8931
Providing and fixing CP Brass 32mm size Bottle Trap of approved
26 17.22A quality & make and as per the direction of Engineer-in-charge. Each 22.00 884.61 19461.42
27 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
17.28.2 Flexible pipe
Dismantling W.C. Pan of all sizes including disposal of dismantled
28 14.82 materials i/c malba all complete as per directions of Engineer-in each 7.00 110.50 773.50
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually
29 17.2 controlled device (handle lever), conforming to IS : 7231, with all
fittings and fixtures complete, including cutting and making good
the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 6.00 5530.32 33181.92
Providing and fixing wash basin with C.I. brackets, 15 mm C.P.
30 17.7 brass pillar taps, 32 mm C.P. brass waste of standard pattern,
including painting of fittings and brackets, cutting and making good
the walls wherever require:
17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with each 7.00 1676.50 11735.50
single 15 mm C.P. brass pillar tap
Providing and fixing PTMT towel rail complete with brackets fixed
31 17.73 to wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm
17.73.2 and effective height of 88 mm, weighing not less than 190 gms. each 7.00 599.24 4194.68
Providing and fixing white vitreous china flat back or wall corner
type lipped front urinal basin of 430x260x350 mm and
340x410x265 mm sizes respectively with automatic flushing
32 17.4 cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings
and brackets, cutting and making good the walls and floors
wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 1.00 5259.12 5259.12
33 MR Providing and fixing 100 MM DIA SWR uPVC pipes (Type-B) : RM 100.00 518.04 51804.00
34 MR Providing and fixing SWR uPVC P trap (Type-B) : each 22.00 340.37 7488.14
Providing and fixing on wall face unplasticised Rigid PVC rain water
35 12.41 pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal
expansion, (i) Single socketed pipes.
Providing and fixing on wall face unplasticised - PVC moulded
fittings/ accessories for unplasticised Rigid PVC rain water pipes
36 12.42 conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal
12.42.1 Coupler
37 12.42.6 Shoe (Plain)
Providing and fixing to the inlet mouth of rain water pipe cast iron
38 12.44 grating 15 cm diameter and weighing not less than 440 grams. each 5.00 47.81 239.05
Marble work gang saw cut (polished and machine cut) of thickness
18 mm for wall lining (veneer work), backing filled with a grout of
average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse
39 8.1 sand), including pointing with white cement mortar 1:2 (1 white
cement : 2 marble dust) with an admixture of pigment to match
the marble shade (To be secured to the backing by means of
cramps, which shall be paid for separately)
8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black
8.1.1.2 Area of slab over 0.50 sqm sqm 9.26 4988.87 46216.89
ELECTRICAL WORK
Digitally signed by Rakesh
“Renovation/Beautification of Steel Club, Sec-9 , ”under the work of Various Civil, Electrical, Water Supply, Horticulture,
Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).
SL No DSR/MR ITEM DESCRIPTION Unit Qty AMOUNT
Supply & Erection of 5 mtr Galvanized Octagonal single Arm
Decorative pole as per dimension: Top Dia-70 mm,Bottom Dia-
130mm, section-1 (section length-7000mm) Thickness-3mm.
1 MR-140 Base plate-200 x200x12mm. Pole shall include all accessories as EACH 22.00 15571.20 342566.40
foundation bolts, junctions box,McB connector, connecting cable
from Jb to Lighting fixture, Earthing cable to Fixture,MCB channel.
SUPPLY AND FIXING OF 60-65 W LED STREET
LIGHTFITTING.LUMINARIES#TYPE :LED, POWER RATED 60-65W,
VOLTAGE RATED:240V AC 50HZ, FOR STREET LIGHT FITTINGS
2 MR HAVING PRESSURE DIE-CAST ALUMINUM EACH 22.00 3468.59 76308.98
HOUSING&FRAME,MANUFACTURE WORD MARK/NAME
ENGRAVED/EMBOSSING ON THE DIE -CAST HOUSING,HEAT
RESISTANT TOUGHENED GLASS/POLY CARBONATE COVER WITH
IP66 PROTECTION
Excavation of new cable trench of 1.5 feet deep & 1 feet width in
all kinds of soil (including cutting of cement concrete, pitch road,
rail line crossing, wet soil, hard & rocky soil etc.) & back filling to
3 MR the reqd. extent. (wihout brick and sand) including supply & laying Mtr 500.00 619.36 309680.00
HDPE pipe, the HDPE pipe shall confirm to P-63 grade, dia 50mm,
wall thickness more than 4mm with ISI mark as per direction of
Engineer-in-charge.
Supply and laying of cable 4 x 25mm2 al. The cable 1100v grade
shall confirm to is:1554(part-1) with standard aluminum conductor
confirming to class-2 of is:8130/84. The cable shall be with armour
4 MR of galvanised round wire/flat steel strip. Cable shall confirm to the Mtr 493.24 848.15 418338.11
is indicated with its latest amendment. Cable shall be with ISI
certification mark. Cable shall be laid in existing trench
Supply and fixing of fabricated feeder pillar ofsize 850mm(h) x
500mm(l) x 400mm (w) made out of 2mm thick ms sheet with
front opening two doors (for housing cable and termination kit
kat fuse/catridge fuse base of size- 0 & size-1, neutral bus and 2
nos. stud bolts for earth connection) fabricated on ms angle
structure/frame of size 850mm + 300mm (h) x 500mm (l) x
400mm (w) made out of 50x50x6mm MS angle(300mm
exetended for legs). The feeder pillar should have 1no 70 to 250A
TP contactor including 24 hours time clock, 1no 200 Amps. HPL/
HAVELS/ INDO ASIAN/ C AND S/ make ICTPN switch fuse unit with
200 Amp HRC fuse, 1no Four pole 63A 240/415V, AC 50Hz
5 MR Miniature Circuit Breaker, 1no Four pole 40A 240/415V, AC 50Hz each 1.00 323396.77 323396.77
Miniature Circuit Breaker, 3nos of ‘C’ Series/ Curve Double pole 6A
to 32A 240/415V, AC 50Hz Miniature Circuit Breaker of breaking
capacity 10KA, including required wiring with 1X6mm2 and 1x10
mm2 Cu. multistrand cable as required etc. The feeder pillar
should have dust and water ingress protection conforming to
ip:54. the feeder pillar should be duly spray painted on both
inner and outer side with one coat of red oxide primer & 2 coats
of alminium paint. feeder pillar to be fixed at site with concreting
4 nos of exetended legs. fitting & fixtures required for feeder
pillar against for feeder piller are as follows. (drawing to be
collected if required )
Supplying and fixing following way, single pole and neutral, sheet
steel, MCB distribution board, 240 V, on surface/ recess, complete
6 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar,
interconnections, powder painted including earthing etc. as
required. (But without MCB/RCCB/Isolator)
2.3.1 6 way , Double door Each 1.00 2201.93 2201.93
2.3.2 8 way , Double door Each 2.00 2568.25 5136.50
Wiring for light point/ fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLS PVC insulated copper conductor single core
7 1.3 cable in surface / recessed steel conduit, with modular switch,
modular plate, suitable GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable etc.
Supplying and fixing following modular switch/ socket on the
8 1.24 existing modular plate & switch box including connections but
excluding modular plate etc. as required.
1.24.4 3 pin 5/6 A socket outlet Each 25.00 121.78 3044.50
1.24.5 6 pin 15/16 A socket outlet Each 5.00 196.64 983.20
Digitally signed by Rakesh
“Renovation/Beautification of Steel Club, Sec-9 , ”under the work of Various Civil, Electrical, Water Supply, Horticulture,
Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).
SL No DSR/MR ITEM DESCRIPTION Unit Qty AMOUNT
Wiring for circuit/ submain wiring alongwith earth wire with the
9 1.7 following sizes of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed steel conduit as required.
Supplying and fixing following size/ modules, GI box alongwith
10 1.27 modular base & cover plate for modular switches in recess etc. as
Supply/fixing of following sizes of heavy duty exhaust fan for single
11 MR phase 230 volt, 50HZ AC supply complete with motor, blades, EACH 5.00 2222.88 11114.40
frame, bracket, louver/ shutter etc as required.
Supplying and fixing two module stepped type electronic fan
12 1.25 regulator on the existing modular plate switch box including EACH 5.00 368.31 1841.55
connections but excluding modular plate etc. as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
including accessories, and providing masonry enclosure with cover
13 5.4 plate having locking arrangement and watering pipe of 2.7 metre each 4.00 7458.20 29832.80
long etc. with charcoal/ coke and salt as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below
ground as strip earth electrode, including connection/ terminating
14 5.9 with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall Mtr 1050.00 143.74 150927.00
be done by overlapping and with 2 sets of G.I. nut bolt & spring
washer spaced at 50mm)
Supplying and fixing following rating, four pole, 415 V, isolator in
15 2.13 the existing MCB DB complete with connections, testing and
commissioning etc. as required.
Supply & fixing of Surface Mounting cool white/warm
white LED fitting of 18w with suppy voltage 100V - 265
16 MR V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Each 12.00 1217.75 14613.00
Efficacy: >90 lm/W
,Weather protection: IP 20
SUPPLY AND FIXING OF COOL WHITE LED HEAVY DUTY
FLOOD LIGHT FITTING OF POWER 100 WATT WITH SUPPLY
VOLTAGE AC 160V TO 270V, 50HZ, PF>0.95, HERMETICALLY
17 MR SEALED PROVIDING IP66, LED EFFICIENCY >90LM/W, THE JOB Each 15.00 4020.57 60308.55
SHALL BE DONE AS PER THE DIRECTION OF ENGINEER-IN-
CHARGE & AS DETAILED IN TECHNICAL SPECIFICATION.
SUPPLY, FIXING AND TESTING OF COOL WHITE LED HEAVY DUTY
FLOOD LIGHT FITTING OF POWER 200 WATT WITH SUPPLY
VOLTAGE AC 160V TO 270V, 50HZ, PF>0.95, HERMETICALLY
SEALED PROVIDING IP66, LED EFFICIENCY >100LM/W, THE JOB
18 MR 59 SHALL BE DONE AS PER THE DIRECTION OF ENGINEER-IN- Each 6.00 14155.81 84934.86
CHARGE & AS DETAILED IN TECHNICAL SPECIFICATION and
approved by EIC/RSP-SAIL, complete in all respect.
Supply & fixing of 1x16w/20W , LED T/L Fitting with mounting
19 MR channel,bi-pin holder & tube on existing wooden board/round block Each 30.00 454.16 13624.80
with necessary connections.
Supply & fixing of ceiling fan 48"sweep including all
20 MR necessaryconnections for proper functioning of fans. EACH 5.00 3228.03 16140.15
Digitally signed by Rakesh
“Renovation/Beautification of Steel Club, Sec-9 , ”under the work of Various Civil, Electrical, Water Supply, Horticulture,
Hospitality jobs required for Hockey World Cup-2023 and other jobs in Steel Township at Rourkela (Odisha).
SL No DSR/MR ITEM DESCRIPTION Unit Qty AMOUNT
Supply and fixing of 4mtr long Single arm Decorative Poles for
Road way lighting made out of combo type Hot Dip Galvanized
Pipes as per the IS:1161:1998 with with Ornamental cast
Aluminium spigots at the bottom & brackets with an extensive
treatment with sand blasting, PYU based etch primer & matt finish
powder coating on the surface to make it absolutely rust &
corrosion proof, as giving the pole a fantastic athelic look. Suitable
for 1 nos. 45 W LED Tear Drop light fittings. The cost includes
wiring, fixing on foundation all materials. labour, T&P and
transpotation etc. complete as per direction of the Engineer In-
Charge. (Specification: Top-1000mm length X 100mm dia, bottom-
3000mm length X 50mm dia)
Supply and Fixing of 45W Tear Drop LED light (Warm White) Heavy
spun aluminium housing Heat resistant acrylic diffuser IP65.
Rated Voltage - 220V
Current - 240V-0.150-0.180
Watteage 240V-35-45W
Construction of Foundation for 4mtr Decorative Poles with supply
23 MR of all materials, labour, TP and transportation for providing earth EACH 15.00 6707.59 100613.85
work, filling in foundation all complete as per the CPWD
specification & direction of Engineer-In-Charge.
Total Amount 7666435.98
Total Amount 7666435.98
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
01 NIT 19.pdf
Tender Document
06 GCC with upto date amendments.pdf
Tender Document
SCC.pdf
Tender Document
Final_LIST_OF_MAKES.pdf
Tender Document
BOQ_SAIL_RSP.pdf
Tender Document
8 Milestone.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .