REPAIR TO OTM ACCN OF EME, TPT AND SIGNAL UNITS ZONE A AREA UNDER GE (A) AHMEDABAD

Amount

Dismatling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge etc.complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

M & L for light shade vitrified ceramic tile, light shade flooring of size of tile 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed.

M & L for vitrified ceramic tile, light shade of size 600x600x8-10mm thick as in skriting set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including 10 mm thick rendering in CM 1:4 complete all as specified and direceted.

M & L for double charged Virified Ceramic tiles light/Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed.

Taking up or down steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site.

15mm bore of pipe

20mm bore of pipe

S&F bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

15mm bore of pipe

20mm bore of pipe

S&F Unplasticised PVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe. Complete all as specified and directed.

15mm bore of pipe

20mm bore of pipe

Cutting chases of brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends for concealed water tubing etc and making good, cutting exceeding 10cm but not exc 20 cm girth.

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm bore (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90 gms) complete all as specified and directed

S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm/20mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.

S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe 20mm bore (Minimum weight 112gms) complete all as specified and directed.

S&F in repair stop/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle for pipe of 15mm bore complete all as specified and directed.

S&F in repairs two way bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S & F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F in repair PVC lids for water storage tank of cap 500 Litres/1000 Litres complete all as specified and directed .

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed.

S&F in repair 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified and directed by Engineer in Charge

S&F in repair Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring complete all as specified and directed.

S&F in repair MS handles for steel windows (left or right) 150mm size complete all as specified and directed by Engineer in Charge

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down/ Dismantling existing unserviceable WC of any description and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore, screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F in repair vitreous china Wash down water closet (pedestal pattern), complete including Pedestal pan and trap and seat cover, including connection to drain ( or outgoing pipe) and flushing pipe, antisyphonage pipes etc (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S&F for 19/20 mm harrison rail/curtain rails stainless steel chromium plated with fixing brackets stops fixed in repairs.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L Granite slab work 18-20mm thick in floors steps,riser,wall cladding, cooking platforms and like including pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge. (Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate)

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2.0m complete all as specified adnd directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl decorative laminated sheet on both faces.

S&F factory made 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/Ceosetory windows & other frames/chowkat of size 65x100mm comprising of virgin PVC polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood power/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/ cum , screw withdrawl strenth of 2200N face & 1100 N (Edge) minimum compressive strength of 58 N/mm2 moudules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer -in- Charge Note :- for WPC solid door/ window frames minus 5mm tolerance in dimension ie depth and width of profile shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring all as directed fixed in repairs.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

M & L for preparation of old painted wooden : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces applying two coat of synthetic enamel paint (ordinary tint) over a coat of red oxide primer on steel surfaces, complete all as specified and directed

M & L for preparation of old painted steel : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

S&F for butt hinges 100mm size medium weight stainless steel complete all as specified and directed.

M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm both side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on sl page No 150 of SSR part II (for item-884).

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F Aluminium powder coated door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydraulic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock,hydraulic door closer with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

S&F Aluminum power coated section size 100X44X1.48mm for partition walls in panels square or rectanglar section all other members channel tracks including gasket aluminum cleat 6mm dia rounded bars, 5mm thick tinted glass panes including aluminium handle hinges and locking arrangements sliding rail roller or fixed as directed by Engineer-in- charge etc complete all as specified and directed

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.

S & F 18/19 mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1 mm thick outer face layer having density not less than 1400 Kg/cu m and density of central core not less than 600 kg/cu m, manufactured by an ISO 9001-2015 certified company all as specified and directed.

S & F 60 x 30mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cu m all as specified and directed. Note : (a) Door frame shall be water proof, termite proof, fire retardant and having excellant screw holding capacity. (b) Rate for this item includes Material and labour for fixing of frame with minimum 06 Nos of hold fasts/Dash through bolts of suitable size as directed by Engineer-in-Charge.

S&F 150 mm size fancy type SS handles,door handles complete all as specified and directed.

S&F aluminum anodised , barrel tower bolts of extruded section 200mm long fixed complete all as specifed and directed.

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

S&F designer false ceiling made of 12mm thick gypsum board of saint Gobin or equivalent over and including all GI grid of standard quality to hold false ceiling including two coats of plastic interior emulsion of any colour over one coat of primer and two coats of acrylic putty complete all as specified and directed

S&F PVC wall panelling with decorative finish / wood finish having thickness minimum 5 mm thick premium quality over supporting standard grid to rest panelling including all necessary fittings,fixtures and required aluminium/GI section of standard quality to hold false ceiling complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified.

M&L 75mm thick PCC 1:4:8 using 40 mm graded stone aggregate as in sub base complete all as specified and directed

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified and directed.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M&L for rendering on external wall fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering on internal wall surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed

M & L for 10mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all as specified and directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coats Oil bound distemper, white or tinted over a coat of primer surfaces and wall care putty complete all as specified and directed.

M&L for preparation of new surfaces of ceiling plastered and applying two coat of oil bound distember over a coat of primer complete all as specified and directed

M&L for perparation of old decorated surface of ceiling(plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applying one coat of white wash on ceilings.

M&L for preparation of old surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed

M&L for preparation of old surfaces and appying one coat of cement base paint on walls complete all as specified and dircted.

M&L for comple removing of existing treatment on wall by brooming down or scrapping down smoke , soot moulds, moass and efforocent salts trading oil and greasy sposts to surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as speciefied and directed

M&L for complete removal of existing treatment & applying two coats Oil bound distemper, over 3.0mm avg thick of wall care putty and alkali resistance priming paint on wall complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in In CM (1:4) complete all as specified and directed.

Repair of steel window shutter not exc 1 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each pane complete all as specified and directed

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed

S & F of mild steel work such as window guard bars door frame and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel heeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified conforming to Fe – 410 W Grade – E 250 complete all as specified and directed.

S&F Rolled sections as in Purlin ,rafter ,main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate conforming to Fe – 410 W Grade – E 250 complete all as specified and directed.

S&F mild steel tubular / rectangluar section as in coloumn, posts, raffetrs beams gasset plate and struts embedding in concrete , and screwing Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe – 290 Grade – E 165 complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F in repairs shower rose 150 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F in repair health faucet with one meter tube and hook complete all as specified and directed

S & F in repair 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

S/F grating doom 150 mm size of Stainless Steel (Minimum weight 100 gms) complete all as specified and directed.

Taking down CI/PVC/AC soil pipe with fittings from wall, trenches of any description including fittings complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl fittings and fixtures like bend , elbow,tee etc.complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc.complete all as specified and directed.

S&F in repairs 75mm bore for PVC (SWR) pipes single socketed in any length with rubber joints, laid in trenches or in floor complete all as specified and directed.

M&L in repairs 75mm bore for PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing with solvent cement..complete all as specified and directed.

S&F in repairs Mortice lock verticale type size 100mm aluminum 4 levers include for escutcheon plates and two keys complete all as specified and directed.

Taking down shutter resecuring, easing and cutting refixing in the same opening shutters of any description exc 1 Sqm and not exc 2 Sqm complete all as specified and directed.

S&F in repair 18/19 mm thick block board, interior grade, veneered one both sides with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work as in cupbord door/shelves complete all as specified and directed

S & F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed.

Complete removal of existing water proofing treatment with washing and brushing and removal of all bushes and algaes and after drying surface providing & applying first coat of acrylic polymer based elastomeric water proofing chemical coating and after drying of 1st coat applying fiber mesh and again applying 2nd coat of acrylic polymer based elastomeric water proofing coating application of both coat of chemical should't be less than 1 kg/Sqm complete all as specified and directed as Engr-in-Charge.

S&F stainless steel kitchen plate rack, 1 mm thick of size 900 mm x 780 mm x 222 mm fixed to wall in repairs with brass screws complete all as specified and directed.

S&F 12mm thick toughned glass door incl 02 Nos SS handle, floor srping and all necessary fittings and fixturescomplete all as specified and as directed.

Shree Karni Construction (BID ID -3336144)

G.S.MAGO AND SONS CONSTRUCTION PVT.LTD (BID ID -3334097)

GIRNAR CONSTRUCTION (BID ID -3330032)

DMA PROJECTS (BID ID -3337675)