Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC VPO BAHANG TEH MANALI DISTT KULLU HP | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹10.2 L+₹1.6 L (18.2%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I R AND D MANALI
AGE I R AND D MANALI PIN 175103 PH 01902255014
REPAIR/ REPLACEMENT OF CEILING,ROOFING AND OTHER B/R WORKS AT DGRE RDC MANALI UNDER AGE I R AND D MANALI
2022_MES_533414_1
AGE(I)/MNL-27/2022-23
Open Tender
Civil Works
Item Rate
240 days
DGRE RDC Manali
As per NIT
5 documents required · 5 mandatory
₹500
AGE I R AND D MANALI
₹16,000
Yes
22 Sept 2022
24 Jun 2022
1 Aug 2022
24 Jun 2022
30 Jul 2022
8 Jul 2022
Amount
Dismantling of plain or corrugated steel sheeting any gauge, thickness roof coverings complete all as specified and directed by Engr-in-Charge.
S&F, 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs wall etc with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.
All as per item No. 2 hereinbefore but except sheeting, complete all as specified and directed by Engr-in-Charge.
S&F, Pre-painted galvatume aluminium sheet zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
M&L for Closing bolt holes etc in old corrugated sheets by sealing with one bitumen and one curved GI washer on either side and 6 MM GI bolts and nuts,all set in stiff white lead all as specefied and directed by Engineer-in-charge.
Dismantling wall and ceiling board,of any description complete all as specified and directed by Engr-in-Charge.
Dismantling timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section, complete all as specified and directed by Engr-in-Charge.
S&F, plain fillets squre,rectangular or triangular in section clean sawn secured with nails of Iind class soft wood sectional area Exc 13 and not Exc 25 Sqcm complete all as specified and directed by Engr-in-Charge.
M & L for plain fillet second class hardwood Exc 3 Sq.cm & N Exc 6 Sq .cm ,rectangular or triangular in section, clean sawn, secured with nails or beads complete all as specified and directed by Engr-in-Charge.
M&L for 12 mm thick perforated particle board of any size fixed with screws to timber frame as in ceilings complete all as specified and directed by Engr-in-Charge( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition complete all as specified and directed by Engr-in-Charge .
M&L for 4mm thick Asbestos cement plain boards as in ceiling fixed with screws to framework complete all as specified and directed by Engr-in-Charge( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition, complete all as specified and directed by Engr-in-Charge.
M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling complete all as specified and directed by Engr-in-Charge( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly wooden/perforated particle boards surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge.
M&L for preparation of old decorated wooden surfaces of any descriptions exc 10 Cm width or girth and applying one coat of synthetic enamel paint at any height including all necessary scafolding etc all as specefied and directed by E.I.C.
M&L for preparation of newly steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engr-in-charge.
M&L for Preparation of new surfaces and applying three coats of white wash as in ceiling complete all as specified and directed by Engr-in-Charge.
Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
S&F, mild steel of joist channel, angle, Tee section, or hollow tubes (rectangle/square/round) fixed indepently without connecting plates confirming to Grade Fe 410-0 or Gde E-250 quality( A) complete all as specified and directed by Engr-in-Charge.
M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-charge.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tiles over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-charge.
NATHU RAM AND SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .