Providing & Fixing Furniture work for PSQ Cat. B-160 at SRP GR-13 Ghanteshwar Rajkot City , PSQ Cat. D-40, E1-02 & E-10 at PHQ Rajkot City , PSQ Cat. C-01 at Kotda Shangani Dist. Rajkot , PSQ Cat. B-24, C-02 & D-01 at Mandvi Police Line Dist. Kutch , PSQ Cat. B-12, C-04 & E-01 at MTF Narayansarovar Dist. Kutch , PSQ Cat. E1-01 at Gandhidham Dist. Kutch , PSQ Cat. B-48, C-06, D-02 & E-01 at MTF Okha Dist. Devbhoomi Dwarka. (1st Attempt)

No. Rate Rs. in Words Rs.Ps

(A-CIVIL ITEM)

Providing & Fixing Shutters & Frame made of 16 mm thick Calibrated HDF

Board with minimum dencity of 850kg/m , Fixed on Frame with exposed

side 0.8mm thick decorative high pressure lamination sheet of plain / wood

grain in gloss / matt/ suede finish with high density protective surface

layer confirming to is :2046 and other side with 0.8 mm thick balancing

lamination , pressed on hot-press method with approved adhesives

including preparation of base surface. All the edges must be sealed with

22*2 mm PVC/ABS (poly Vinyle chloride / Acrylonitrile Butadiene Styrene)

edge bands , glued on computer controlled automatic Edge bending

machine with pre- milling operation using hot-melt glue while pre-milling

function putting 'on' mode.

Item Page 45 Estimated Estimated Rate Rs. Amount

Description of Item Total Qty. Unit

No. Rate Rs. in Words Rs.Ps

Rate includes all Materials , labours and operations as discribed above or

otherwise required for completing job except otherwise specified

elsewhere of measurements. Each Component as Fixed in position will be

measured separately as per unit of measurement mentioned against each in

following sub items. other hardwares including SS baskets and Channels

will be paid for separately under relevants items. Area of each component

shall be measured separately for payment purposse The rate should be

inclusive of all inputs all leads, lift and incidental charges for each item,

nothing shall be paid extra The conceptual drawings have been appended

in the tender for broad understanding of the contractor , however the

contactor need to submite shop drawing for final approval of the engineer

in charge. nothing extra will be paid for inerstion of additional member at

junction Joints , corner in order to facilitate easy assembly of different

components of cabinet.

Providing, Supplying and Fixing 16MM thick HDF Board of Approved Brand. Rupees One Thousand

1 The rate inclusive with labours, Adhesive,Cutting and Fixing As per drawing 12085.00 Sqm 1096.15 Ninety Six and Paisa

and as Directed by engineer-in-charge. Fifteen Only

Providing, Supplying and Fixing 0.80 MM thick laminate of Approved Brand

Rupees Seven Hundred

(Figured Laminate For Out Side), The rate inclusive of Adhesive,Cutting and

2 6206.00 Sqm 702.70 Two and Paisa Seventy

Fixing of Laminate by hot melt glue process As per drawing and as Directed

by engineer-in-charge.

Providing, Supplying and Fixing 0.80 MM thick laminate of Approved

Rupees Six Hundred

Brand(Plain White Laminate inner Side), The rate inclusive of

3 15887.00 Sqm 645.36 Fourty Five and Paisa

Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per

Thirty Six Only

drawing and as Directed by engineer-in-charge.

Providing, supplying and fixing PVC/ ABS edge Beading 22 x 2 mm

thickness of Approved Brand. Adhesive,Cutting and Fixing of Laminate by Rupees Sixty Nine and

hot melt glue process As per drawing and as Directed by engineer-in- Paisa Ninety Eight Only

Supplying & Fixing & installation of SS Grade 304, Cutlery Basket of

Rupees Five Thousand

Approved Brand of size (470 x 535 x 100) mm Approximately with

Five Hundred Sixty One

5 minimum weight 2.765 Kg for kitchen cabinet. Including 20" DRSL(35 KG) 315.00 No. 5561.88

and Paisa Eighty Eight

Soft Closed channel of Approved Brand As per drawing and as Directed by

engineer-in-charge..

Item Page 46 Estimated Estimated Rate Rs. Amount

Description of Item Total Qty. Unit

No. Rate Rs. in Words Rs.Ps

Supplying & Fixing & installation SS Grade 304, Cup & Soucer of Approved Rupees Four Thousand

Brand of size (470 x 535 x 100) mm Approximately with minimum weight One Hundred Sixty Six

3.253 Kg for kitchen cabinet.Including 20" DRSL(35 KG) Soft Closed channel and Paisa Twenty Nine

of Approved Brand As per drawing and as Directed by engineer-in-charge. Only

Supplying & Fixing & installation SS Grade 304, Thali Basket of Approved

Brand of size (470 x 535 x 150) mm Approximately with minimum weight Rupees Four Thousand

7 3.751 Kg for kitchen cabinet of Including 20" DRSL(35 KG) Soft Closed 317.00 No. 4035.70 Thirty Five and Paisa

channel of Approved Brand As per drawing and as Directed by engineer-in- Seventy Only

Supplying & Fixing & installation SS Grade 304, Plain Basket of Approved

Rupees Three

Brand of size (470 x 535 x 100) mm Approximately with minimum weight

Thousand Eight

8 2.533 Kg for kitchen cabinet of Including 20" DRSL(35 KG) Soft Closed 592.00 No. 3813.99

Hundred Thirteen and

channel of Approved Brand As per drawing and as Directed by engineer-in-

Paisa Ninety Nine Only

Supplying & Fixing SS Grade 304, PULL OUT of Approved Brand with size Rupees Four Thousand

(200 x 485 x 430) mm Approximately with minimum weight 2.080 Kg for Nine Hundred Twenty

kitchen cabinet ofIncluding 20" DRSL(35 KG) Soft Closed channel of Four and Paisa Two

Approved Brand As per drawing and as Directed by engineer-in-charge. Only

Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Cabinet

Handle of Approved Brand made of Ø 10 mm steel bar and The length of

Rupees One Hundred

handle should be of 160 mm, minimum weight 136 gram perfect center-to-

10 3035.00 No. 142.96 Fourty Two and Paisa

center hole and extremely even surface and should be provided with 2Nos.

Ninety Six Only

of high quality nickel coated Philips four head screw etc. complete As per

drawing and as Directed by engineer-in-charge.

Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Cabinet

Handle of Approved Brand made of Ø 10 mm steel bar and The length of

handle should be of 96 mm, minimum weight 92 gram perfect center-to- Rupees One Hundred

11 center hole and extremely even surface and should be provided with 2Nos. 8771.00 No. 116.66 Sixteen and Paisa Sixty

of high quality nickel coated Philips four head screw etc. complete As per Six Only

drawing and as Directed by engineer-in-charge. engineer-in-charge.

Item Page 47 Estimated Estimated Rate Rs. Amount

Description of Item Total Qty. Unit

No. Rate Rs. in Words Rs.Ps

Providing & Fixing AISI S.S. 304 Grade Stainless Steel Satin Finish Square

Tower bolt of Approved Brand with overall length (excluding Bracket) 200 Rupees Two Hundred

12 mm and inner bolt of □ 10 mm and outer □ 15X15 mm Sqaure Pipe with 2758.00 No. 220.43 Twenty and Paisa

necessary S.S. Fixing Screws etc. complete As per drawing and as Directed Fourty Three Only

by engineer-in-charge.

Supplying and Fixing Plastic Wardrobe Magnet Catcher Of Approved Brand

Rupees Sixty Five and

13 with Necessary Screws etc . Complete As per drawing and as Directed by 12531.00 No. 65.95

Paisa Ninety Five Only

engineer-in-charge.

Supplying and Fixing High Quality Wardrobe Lock Of Approved Brand with Rupees Four Hundred

14 Computerised bras key etc. complete with Necessary Screws etc . 1540.00 No. 498.96 Ninety Eight and Paisa

Complete as Specified in drawing and as Directed by Engineer in Charge. Ninety Six Only

Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Door Hinge of

Approved Brand and shape without bearings, approximate size 75 mm X 62 Rupees Two Hundred

15 mm X 2 mm etc. complete with S.S. 202 Grade necessary S.S. self taping 13264.00 No. 209.82 Nine and Paisa Eighty

philip head screws etc. as per drawing and as directed by engineer-in - Two Only

Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Door Hinge of

Approved Brand and shape without bearings, approximate size 100 mm X Rupees Three Hundred

16 75 mm X 3 mm etc. complete with S.S. 202 Grade necessary S.S. self taping 12036.00 No. 392.05 Ninety Two and Paisa

philip head screws etc. as per drawing and as directed by engineer-in - Five Only

Providing, Supplying and Fixing 6MM thick HDF Board of Approved Brand.

Rupees Four Hundred

The rate Inclusive with labours, Adhesive,Cutting and Fixing As per

17 667.00 Sqm 491.91 Ninety One and Paisa

Specified in drawing and as Directed by engineer-in-charge.

Ninety One Only

Providing & Fixing of SS 304 Grade pipe of 25 mm dia. 1mm Thick Including Rupees Five Hundred

18 End cape necessary S.S. self taping philip head screws etc. as per drawing 2981.00 Rmt 501.71 One and Paisa Seventy

and as directed by engineer-in -charge. One Only

Providing & Fixing of SS 304 Grade bracket of 25 mm dia. Of Approved

Rupees Fifty Four and

19 Brand including necessary S.S. self taping philip head screws etc. as per 1991.00 No. 54.35

Paisa Thirty Five Only

drawing and as directed by engineer-in -charge.

Item Page 48 Estimated Estimated Rate Rs. Amount

Description of Item Total Qty. Unit

No. Rate Rs. in Words Rs.Ps

Supplying & Fixing & installation SS Grade 304, Plain Basket of Approved

Rupees Four Thousand

Brand of size (470 x 535 x 150) mm Approximately with minimum weight

Two Hundred Ninety

20 3.010 Kg for kitchen cabinet of Including 20" DRSL(35 KG) Soft Closed 314.00 No. 4297.86

Seven and Paisa Eighty

channel of Approved Brand As per drawing and as Directed by engineer-in-

Providing, supplying and fixing PVC/ ABS edge Beading 22 x 0.8 mm

Rupees Thirty Nine and

thickness of Approved Brand. Adhesive,Cutting and Fixing of Laminate by

21 30855.00 Rmt 39.28 Paisa Twenty Eight

hot melt glue process As per drawing and as Directed by engineer-in-

Providing and Laying 15 to 18 mm thick Telephonic Black Granite to be laid

on 16 mm thick HDF Plywood with fixing 2" wide granite moulded facia Rupees Two Thousand

patti on front edge of plateform as per drawing.The Rate inclusive of cost of Three Hundred Sixty

Granite, Facia Patti and Necessary Adhessive & labor Etc....as Specified in Six and Paisa Seven

drawing and as Directed by Engineer in Charge. Only

Providing and Fixing Stainless Seel (S.S. 304 grade ) 1mm thick Matt/Satin

Finishing Kitchen Sink of over all Minimum size 533 mm X 457 mm X

mm Deep having Bowl minimum size 470 mm X 395 mm X 203 mm Rupees Five Thousand

Required adhesive material.including of 32mm dia C.P. brass waste Six Hundred Eighty

23 coupling and 32mm dia rigid PVC waste pipe upto N.T. S.S Kitchen Sink of 3.00 No. 5682.55

Two and Paisa Fifty

Approved Brand Make List of GSPHCL and wall mounted swan neck pillar Five Only

tap of approved brand Make List of GSPHCL

Total Amount =

Total Amount =

Siganature Of Contractor Executive Engineer

G.S.P.H.C.Ltd.,