GE(N)AMB-68(P)/2020-21 REPAIR TO GATE, FENCING, COMPOUND WALL, HARD STANDING IN CERTAIN MD AND OTM ACCN IN THE AOR OF AGE B/R-I GE (NORTH) AMBALA CANTT

Amount

SCH 'A' SECTION-I (B/R WORKS) Demolition of cement concrete (un-reinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M&L machine pressed rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 80 mm thickness grade M-40 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and as directed by the Engineer-in-Charge

M&L machine pressed rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006 of 60 mm thickness grade M-35 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and as directed by the Engineer-in-Charge

M & L PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L broken stone hardcore of gauge not exc. 63mm, deposited , spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by the Engineer-in-Charge.

M & L providing cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

M &L 10mm thick coloured paver tiles (Endura Tiles) of size 300 x 300mm in floors etc set and jointed in neat cment slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in C.M 1 :4 ,complete all as specified and as directed by the Engineer-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engr-in-charge.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M&L brick work with old servicable bricks obtained from item No. 1.08 here in above straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 including cleaning of old bricks complete all as specified and as directed by the Engineer-in-Charge.

M & L taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L rough cast plaster 15 mm thick in cement motar 1 :3 complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1 shall be applied, complete all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick cement plaster on brick or concrete walls surface in CM 1:4, finished even and smooth with out using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M & L complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of cement base paint complete all as specified and as directed by the Engineer-in-Charge

M & L complete removal of existing treatment on walls, pillars cornices etc ( any number of layers) by scrapping with steel scrappss or any other means, washing down with water to remove loose particles etc and applying two coats of exterior emulsion paint (Apex paint) complete all as specified and as directed by the Engineer-in-Charge

Dismantling of barbed wire any type and in any position and removing from site complete all as specified and as directed by the Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed by the Engineer-in-Charge.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by the Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C) any section , including taking out embedded portion and making good distrubed ground (posts embedded in concrete, brick work, masony, etc.) complete all as specified and as directed by the Engineer-in-Charge.

M & L mild steel work in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 410-W (Gde E-250) quality 'A' complete all as specified and as directed by the Engineer-in-Charge

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed by the Engineer-in-Charge.

M & L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L mild steel round bars 10mm dia and over ,cut to length, bent to shape for tying chain link fencing complete all as specified and as directed by the Engineer-in-Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by the Engineer-in-Charge.

M&L rolled mild steel framed work as in door ornamental and intricate design of door or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-410-(Gde E-250) quality 'A' complete all as specified and as directed by the Engineer-in-Charge.

M&L glazed ceramic black coloured tiles joint free1st quality (square/rectengular) 6 to 7mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm in vertical surfaces/skirtings/dados, set and jointed in neat cement slurry and pointed in black or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M & L preparation of old treated steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M & L preparation of new steel and iron surfaces of any description, not otherwise dscribed, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

M & L RCC 1:1-1/2:3 type A1 using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M&L TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge.

M&L form work to soffits of suspended slabs such as roof slabs, , floor slabs, landings and similar work n exc 200mm thick, finished rough surfaces of concrete flat complete all as specified and as directed by the Engineer-in-Charge.

M&L preparing new plastered surfaces on walls, chajjas, roof projection, cornices etc.and applying two coats of cement base paint (white or tinted) on surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Cement concrete (un-reinforced) of any description and in any position not other wise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M & L PCC 1:3:6 Type C2 using 40mm graded crushed stone aggregate as in surface channels and drain complete all as specified and as directed by the Engineer-in-Charge.

Extra for forming fair finish drain or channel 30 cm inner girth in cement concrete using extra cement including forms, mould, mitred/ stopped end etc complete all as specified and as directed by the Engineer-in-Charge.

M & L concrete bed in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate to drain pipes including packing under and completely surrounding of pipes, after they are laid and tested for 300 mm dia (internal) pipes complete all as specified and as directed by the Engineer-in-Charge. (Pipes shall be measured & paid separately).

Supply and fixing 300mm bore reinforced concrete pipes, class NP 2 with one collar per length of pipe complete all as specified and as directed by the Engineer-in-Charge.

M & L brickwork with sub-class `B` bricks in half brick thick wall straight or curved on plan to any radius built in cement mortar 1:4 including flush pointing as the work proceed complete all as specified and as directed by the Engineer-in-Charge

Cleaning of blockage of WC, bath including removal of sludge upto 1st mainhole complete all as specified and as directed by the Engineer-in-Charge

M & L precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs complete all as specified and as directed by the Engineer-in-Charge.

M & L for repairing of mild steel gate of any type and having area exceeding 2.00 Sqm and not exceeding 10 Sqm by replacement of necessary hinges, rusted small mild steel sections including necessary welding complete all as specified and as directed by the Engineer-in-Charge. Note:- cost of taking down of steel gate and refixing in same position if required at site shall be deemed to be included in quoted rate and nothing extra shall be admissible

kulwant singh govt contractor

M/s Mangal Construction Co.

Ashwani Kumar

singh traders

Durga Enterprises

M/S SHANTI CONSTRUCTION

Shiv Construction Co.

Karishan Kumar goel