CA NO GE(N)/AMB-48/2026-27 REPAIRS AND MAINTENANCE OF DISTRIBUTION BOARD AND SUBMAIN WIRING AND ALLIED WORKS OF SECTOR B AGE EM (N) UNDER GE (N) AMBALA CANTT

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc., complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches, modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately .

Description all as per serial item No. 02 here-in before but for One 3 pin switch socket combination 6 amp on the independent board.

Description all as per serial item No. 02 here-in before but for One 3 pin switch socket combination on same board with other switches.

Description all as per serial item No. 02 here-in before but for one socket outlet 16 Amp with 2.5 sqmm PVC insulated unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.5 sqmm PVC insulated, unsheathed cable colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of modular switch 1 module, single pole, one way, 6 Amps, flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular switch 1 module, single pole, one way, 16 Amps, flush type, 230 volts, complete all as sprecified and as directed.

Supply and fixing socket modular 2/3 pin, 6 Amps, one way, 2 module, 230 volts, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing socket modular 2/3 pin, 6/16 Amps, one way, 2 module, 230 volts, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing socket electronic type fan regulator modular 120 watt, 2 module, complete all as specified and as directed by Engineer-in-charge.