WBPWD/EE/PED/NIQ14 /2024-2025

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mm x 100mm x 62.5mm inspection box making earthing attachment, painting the MS box and mending good the damages to original finish [E-15/3]

Average run 9 mtr [E-15/3(a)]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish [E-15/4]

On Board [E-15/4(a)]

Average run 7.5 mtr [E-15/4(f)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy.fittings as required [E-14/1(a)]

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1(a)(i)]

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [E-14/1(a)(iii)]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [D-13/22]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [C-4/28]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [C-4/29]

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [C-4/30]

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. [C-2/15]

Supply & Delivery of Single LED Tube light fittings (make- Philips, Cat No. TMC-502 P1xT-LED 22W / equivalent model of CG Fittings- IGP161LT8-16 1 x T8 with 01 Nos LED TUBE Philips Cat No- Mas LED Tube 1200mm 18W 865 T8 I – 2100 lm /Crompton- Cat No- LTB-20-865-(2) or equivalent make and model of Havells)

S&F 230V 9W LED Bulb (Make- Phillips/Crompton/ Havells)

Suppy and Delivery of 230 V 50 HZ 450 mm 90W, 1325 RPM ,110 CMM , high flo oscillating type, metal blades Wall Bracket fan operated by pull cord switch with inbuilt regulator .(Make -CG /Orient- Tornado II /Approved)

Supply and delivery of 230V9" ( 230mm ) Speed 1370 RPM Heavy Duty Exhaust fan with all necessary accessories [Make: EPC/Usha/ CG or equivalent Make]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/5(a)]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(b)]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/17]

Supply and delivery of Non-inverter wall mounted SPLIT room air conditioner having the following major specification:- (a) Minimum Cooling capacity required : 24000 BTU / Hr. or Higher (b) Minimum Star rating-2 Star or higher (c) Rated voltage—230v +/-5%, Frequency-50Hz. (d) Compressor type-Rotary. (e) Mini. Room Discharge air flow rate- 650 CFM or higher f) Condenser tube -Copper condenser coil g) Minimum Tonnage required: 2 TR or higher h) Refrigarent- R32/R410A i) Cordless Remote arrangement with all modernized provision of temperature settings, Fan speed option(low/medium/high), Auto swing, Air direction setting, Timer facility, Turbo operation setting, Air ventilation arrangement, and others.Incl. delivery charges. ( Make:- Mitsubishi Electric Model- MS/MU- GK24VA /O-General Model - ASGA24BMWA-B / Mitshubhisi Heavy Industries)

Installation, testing & commissioning of the above-said 2.0/1.5/1.0 Ton split AC incl. Supply & fixing required Angle Iron Structure on wall & mending works as per direction of E.I.C.

Supply Installation and Commissioning of 5/8" hard/soft copper refrigerant piping, complete with fitting, elbows, bends, supporting arrangement on walls

Supply Installation and Commissioning of 1/2" hard/soft copper refrigerant piping, complete with fitting, elbows, bends, supporting arrangement on walls

Supply & Fixing Pipe Insulation in suction line 5/8" with 19mm 'O' class nitrile rubber tube(Make:Accoroflex/Suprime)

Supply & Fixing Pipe Insulation in suction line 1/2" with 19mm 'O' class nitrile rubber tube(Make:Accoroflex/Suprime)

Providing and laying electrical cabling 3/4 Core 2.5sq. mm. Communication Cable (Make:Finolex/KEI/Polycab)

S & F of flexible PVC high quality water carrying pipe of 25 mm dia/proper size for drainage the condensate water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC

Supply and Delivery of Timer DB 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch(Make-L&T-AUTS03ANA00/Legrand/ABB) 2) 2 Pole Power Contrcator (L&T-MNX 22-2P Cat No-CS90238/Legrand/ABB), 3) 20A SP MCB. (Legrand/ABB/Siemens) 4) 32A DP Isolator. (Legrand/ABB/Siemens) 5) Toggle Switch. (Make- L&T or equivalent make) 5) (2+12 Way) SPNDB (Legrand/ABB/Siemens) Suitable Size Copper Stranded Wire. 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. The work should be completed with all fabrications, wiring with suitable gauge wires of not less than 4 sq mm copper wire for power wiring & 1.5 sq mm for the control circuit, with suitable heavy-duty terminal blocks, terminations, etc. complete as per direction of the EIC. (Make - Legrand /L & T / ABB )

SAIBAL SARKAR (BID ID -5611308)

COMBINE ENTERPRISES (BID ID -5611333)

DEB SHANKAR LAYEK (BID ID -5610911)