Under “Augmentation of Tap Connectivity in Rural Area”

Name of Work:-Constructing 1.00 Lakh ltr. cap. RCC Sump, Distribution Pipe Line

and Raising main pipe line of various Dia PVC pipe lowering, laying and jointing

Pumping Machinary ,New House hold Tap Connection and also job connection for

Village:Kudol, Ta:Modasa, Dist: Arvalli Under Augmentation of tap connectivity

Scheme, Dist. Arvalli.

Name of Component Amount

Schedule B1 Constructing of Sump 100000 ltr cap Rs.

Distribution Pipe Line Of Various Dia

Schedule B2 Rs.

Schedule B3 Pumping Mashinary Rs.

Schedule B4 Raising Main Pipe Line Rs

Schedule B5 Job Connection Rs.

Schedule B6 New House Hold Connection Rs.

I / WE am /are willing to carry out the

work……….above…………………..below……………..% age (percentage should be

written in figure and words)the tender rate mentioned above amount of my / our tender

work put as under.

1.Estimated cost put to tender cost put to

4.In words Rs/-………………………………………………… 4.In words Rs/-.

District Water and

Chairman Sanitation Unit,

Date & signature Wasmo

of contractor. Gramya Jal & Swachchata Samiti, Kudol Arvalli

Water and Sanitation Management Organization Gandhinagar

Constructing RCC U.G. Sump of 100000 lit. capacity.

QTY UNIT ITEM RATE PER AMOUNT

Preparing structural design of RCC Under Ground /

Partially under ground / above high ground level

Reservoir of required capacity as per relevant I.S.s and

constructing the same, including excavation in all types

of soil strata (including rock) including shoring strutting

if required, for loose soil / to protect from collapse due

to near by traffic load, casting 100 mm thick P.C.C.

leveling course in M-10, Refilling the pit with proper soil

and disposing of the surplus stuff within a lead of

meters. Including cement plaster in CM 1:2 with

approved water proofing compound to inside water

touching surface to container. Including all types of

labour and material charges of lowering, laying,

erecting / hosting and jointing of pipe assembly to inlet,

outlet overflow, washout and bye pass arrangement as

Providing and fixing accessories like MS / GI Ladder, CI

Manhole frame and cover, water level indicator,

adequate cowl type ventilators or lantern type ventilator

with stainless steel jail.

B.B. Masonry chambers for valves. Providing and

applying three coats of cement paint / snowcem to the

out side face of structure. It also includes satisfactory

water tightness test as per relevant I.S. code and

painting name of scheme and capacity on the tank as

per direction of engineer in charge.

List of Indian Standards for Design of GSR / SUMP:-

The structural design of GSR shall be in accordance

with provisions relevant I.Ss.

(1)     I.S. 3370, Part – 1 to 2, 2009 or latest revised.

(1.1)   I.S. 3370, Part – 3 & 4, 1965 or latest revised.

(2)     I.S. 456 – 2000 or latest revised.

(3)     I.S. 1893 – 2000 – 1984 or latest revised.

(4)     I.S. 875, Part – 1 to 3, 1987 or latest revised.

General Specifications:-

(1)    Water depth in container shall be adopted as per

data of tender. If water depth is not specified the

suitable water depth / acceptable to field engineer in

accordance with hydraulic requirement shall be adopted

QTY UNIT ITEM RATE PER AMOUNT

(2)   Shape of container (in plan) specified by in data

shall be adopted in absence circular shape shall be

(3)    Size shall be fixed as per availability of space

(land area) at site / acceptable engineer in charge.

(4)   Effect of overlapping of pressure bulbs on soil due

near by structure and proposed sump should be

(5)   Care shall be taken that no damage should occur

to nearby existing structure. Compensation shall be

paid for the same by agency.

(6)   The minimum concrete grade for RCC shall be M-

(7)   HYSD Fe 415 / 500 grade reinforcing bars

confirming to I.S. 1786 / 1139 shall be considered in

design. CRS / TMT bars shall be provided. In saline

atmosphere corrosion resistance stainless steel / HCR

rebar shall be provided. Any other steel can be used

with approval of C.E./ in situation of non availability in

market without extra cost

(8)   Minimum size (or thickness) of various

components shall be provided as per tender criteria /

specifications in absence as per I.S./ Std. practice of

G.W.S.S.B. Minimum dimensions specified for various

components in tender data / specifications shall be

provided without fail.

(9)   The safe bearing capacity (SBC) shall be referred

from SBC test report. In absence of report it shall be

referred from data sheet. If poor soil is found / water

table is met with during excavation SBC shall be

scientifically ascertained and design shall be revise. No

extra shall be paid for increase in quantity.

(10)   DI pipes and special shall only be used if type is

not specified in tender.

(11)   The rate shall include cost of dewatering during

excavation making all arrangement when water table

meets within depth.

(12)   The structure shall be designed properly to resist

uplift due to ground water table specified in data or

actual ground water table meets with during

excavation. No extra shall be paid. If GWT / Uplift is

mentioned in tender and during excavation it dose not

meet 7.5% rate shall be reduced.

(13)   SS pipes railing shall be provided when sump is

more than 2 meter above ground level.

QTY UNIT ITEM RATE PER AMOUNT

(14)   Appearance of structure should be aesthetically

good looking acceptable to authority.

(15)   Any charge in size, shape, depth below GL,

height above GL, water depth, F.B., size of member etc

can be permitted in exceptional case due to site

condition or hydraulic design requirement by C.E. No

extra shall be paid for change.

(16)   Any charge in data, dimensions, shape, water

depth, reduction in size if permitted by competent

authority and if it reduces quantity then payment shall

be reduced prorate.

(17)   When capacity of GSR / Sump is > 20 lakh liters

two or suitable compartments acceptable to executive

engineer shall be designed and provided.

(18)   Agency shall engage qualified (at least graduate)

consulting engineer for designing the structure and he /

she shall visit the site for guidance of work.

(19)   75% part rate shall be payable for concrete,

reinforcement and plastering items of container until

satisfactory hydraulic testing for water tightness is

performed as per tender condition. Till the work shall

be treated as incomplete.

Above conditions / general specifications Sr. No.

1 to 19 are part and parcel of tender (contact)

and prevail over other provisions in tender.

RCC U. G. Sump of 1,00,000 lit. capacity. (SBC is in

Scope Of Agency)

Water and Sanitation Management Organization Gandhinagar

Providing, lowering, laying and jointing of 75,90,110 mm dia PVC Distribution pipe line

Qty. Unit Item Rate Per Amount Rs.

Providing and supplying in standard length ISI mark

PVC pipes suitable for potable water as per IS

specification no. 4984/1995 nclduing all local and

centaral taxes, transportation, freight charges,

octroi, inpsection charages, loading, unloading,

conveyance to departmental store etc. comp. (6

kg/cm ) 1.One coupler / ring

shall be provided with each full length pipe cost of

which is included in rates below

2. 3% (Three) Discounted rate to be consider for

Coupler jointed pipe

3.Rate for PVC Resin as Rs. 91739/MT (Price

1791.00 Rmt 75 mm dia pvc pipe 96.00 Rmt

2794.00 Rmt 90 mm dia pvc pipe 139.00 Rmt

824.00 Rmt 110 mm dia pvc pipe 199.00 Rmt

Providing and supplying ISI mark G. I. pipes with

Couplings of following class and diameter including

all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

complete. (IS -1239) (Not for well/tube well column

19.00 Rmt (A) 65 mm dia G.I. pipe Medium duty.. 460.00 Rmt

13.00 Rmt (B) 80 mm dia G.I. pipe Medium duty.. 598.00 Rmt

11.00 Rmt (C) 100 mm dia G.I. pipe Medium duty.. 864.00 Rmt

Providing and supplying necessary PVC specials for

required size incl. all local taxes etc comp.

(a) PVC Elbow (Moulded)

5.00 Nos 110mm dia. 358.00 Nos

22.00 Nos 90mm dia. 216.00 Nos

25.00 Nos 75mm dia 129.00 Nos

(b) PVC Tee (Moulded)

5.00 Nos 110x75mm 338.00 Nos

8.00 Nos 110x90mm 470.00 Nos

18.00 Nos 90x90mm 324.00 Nos

15.00 Nos 90x75mm 297.00 Nos

15.00 Nos 75x75mm 199.00 Nos

(c) PVC Reducer (Moulded)

12.00 Nos 110x90mm 188.00 Nos

5.00 Nos 110x75mm 182.00 Nos

18.00 Nos 90X75mm 110.00 Nos

(d) PVC end cap

2.00 Nos 110mm dia. 80.00 Nos

12.00 Nos 90mm dia. 60.00 Nos

18.00 Nos 75mm dia 40.00 Nos

2.00 Nos 65 mm Dia G.I. Tee (M.R.) 320.00 Nos

8.00 Nos 65 mm Dia G.I.Elbow (M.R.) 250.00 Nos

8.00 Nos 65 mm Dia G.I. Nipple (M.R.) 120.00 Nos

4.00 Nos 65 mm dia G I flange. (M.R) 170.00 Nos

4.00 Nos 80 mm Dia G.I. Tee (M.R.) 300.00 Nos

20.00 Nos 80 mm Dia G.I.Elbow (M.R.) 300.00 Nos

10.00 Nos 80 mm Dia G.I. Nipple (M.R.) 150.00 Nos

Qty. Unit Item Rate Per Amount Rs.

10.00 Nos 80 mm dia G I flange. ( M.R) 205.00 Nos

2.00 Nos 100 mm Dia G.I. Tee (M.R.) 380.00 Nos

4.00 Nos 100 mm Dia G.I.Elbow (M.R.) 450.00 Nos

2.00 Nos 100 mm Dia G.I. Nipple (M.R.) 245.00 Nos

2.00 Nos 100 mm dia G I flange. (M.R.) 250.00 Nos

Excavation for pipe line trenches for water supply,

sewerage line, manhole etc. all with

shoring and struting if required as per required

gradient and line including safety

provisions using site rails and stacking excavated

stuff including up to all required lead cleaning the

site etc. complete for all lifts and strata as specified.

0.00 to 1.50 Mt depth

1191.24 Cum (A) In all sorts of soil and soft murrum 89.00 Cum

714.74 Cum (B)In hard murrum,boulders,incl.Macadam road 135.00 Cum

357.37 Cum (C)In soft rock and /or masoanry in CM or LM or 163.00 Cum

lime Concrete / Bituminous road

119.12 Cum (D) In hard rock and / or in C. C. 1:2:4 or RCC with 372.00 Cum

blasting, breaking, chiseling, or by

chiseling/breaking only.

Lowering, laying, fixing and jointing PVC/uPVC/cPVC

pipes and specials of followingclass and diameter

including cost of conveyance from stores to site of

works including cost of labour, material, cement

solvent, giving satisfactory hydraulic testing as per

1791.00 Rmt 75 mm dia pvc pipe 16.00 Rmt

2794.00 Rmt 90 mm dia pvc pipe 17.00 Rmt

824.00 Rmt 110 mm dia pvc pipe 19.00 Rmt

Labour charges for Jointig/Repairing of old pipe line

to new in P.V.C. pipe line of following Diameter at

diff. places inc. specials,necerray Excavation,

Manually for machin excavation dewatering

32.00 No removing of mud, cleaning of pipe and leakage 838.00 Cum

portion, cutting the pipe line and removing piece of

pipe from teach with inclusive of mechanical

devices, J.C.B., Hydra/Crain if necessary and labors

req. (incl.all materail but Exclu.cost of pipe)

Refilling the pipe line trenches including ramming,

watering, consolidating disposal of surplus stuff as

directed within a radius of 3.0 km.

Providing C.C.M.:100 for encasing/CC Block pipes

using trap metal size 12 mm to 50 mm incl. form

work curing consolidation etc. complete for various

location on pipeline.

Providing and supplying ISI mark CI D/F Sluice

Valves , Butterfly Valves & Reflux Valves of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance

to departmental stores, stacking etc. complete.

Butterfly Valve ISI Mark PN 1

Qty. Unit Item Rate Per Amount Rs.

2.00 Nos 65mm 1705.00 Nos

4.00 Nos 80mm 2384.00 Nos

2.00 Nos 100mm 2553.00 Nos

0.00 Nos 125mm 3179.00 Nos

Lowering, laying and jointing in position following C.

I. / D/F Butterfly Valves and Air valves including

cost of all labour, jointing material, including nut

bolts and giving satisfactory hydraulic testing, etc.

2.00 Nos 65mm 393.00 Nos

4.00 Nos 80mm 400.00 Nos

2.00 Nos 100mm 439.00 Nos

0.00 Nos 125mm 479.00 Nos

Providing & Supplying I.S.I. mark G.I. pipes with

coupling of following diameter including all taxes

insurance, transportation, freight charges, octroi,

loading, unloading etc. complete including lowering

laying & jointing pipe with G.I. specials of following

diameter in proper position,grade and alignment as

directed by the Engineer in charge including testing

etc. complete Medium Duty

12.00 Rmt 1)65mm dia 460.00 Rmt

8.00 Rmt 2)80mm dia 598.00 Rmt

8.00 Rmt 3)100mm dia 864.00 Rmt

Construction of valves chambers in brick or

bela stone masonary, locally available in C.

M.1:6.Foundation concrete 150 mm thick in C. C.

1:4:8 of trap metal size 25 mm to 40 mm thick,

inside cement plaster in C. M. 1:3 and cement

pointing outside in C. M. 1:3 and top cover of

precast RCC slab 100 mm thick (with key hole in

two parts, each with handles or MS Bar etc.

complete as give size) Upto 1 Mt. depth from G. L.

to pipe invert level incl. complete civil works but

excl. cost of excavation and refilling. With cast in

situ RCC slab in one single piece with fixing of CI-

MH Frame and cover (excl. cost of CI-MH Frame

and cover) with 23 cm. thk. BM wall in C.M. 1:6.

Size of Chamber 0.60 m x 0.60 m and 1 mtr deep

for (valve less than 200mm dia)

5.00 Nos 1)with precast slab in two parts 15 mm 5380.00 Nos

Water and Sanitation Management Organization Arvalli

Estimate for Mono Sub. Pumping machinery Three phase.

Qty. Unit Item Rate Per Amount Rs.

Providing an dsupllying pump 3 phase 400/440

vott, 50 c/s. A.C. Supply & 2900 RPM , following

IS 14220 MOC : Casing: CI-FG260, Impeller :

Bronze & Shaft : SS:410

1.00 Set Cat : SM-3.2, 1000 lpm, 24 M head, 12.5HP 23717.00 Set

Providing and supplying Control pannel board

for Sub. Pump detailed specification as per

1.00 No S. D. from 11 to 15 HP 11119.00 No

25.00 Rmt Supply of Flat PVC cable for sub pump. detailed 87.00 Rmt

technical specification as per GWSSB R/C. of

size 1 x 3 x 4 0 sq mm

Providing and supplying ISI mark G. I. pipes

with Couplings of following class and diameter

including all taxes,

insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,

conveyance to departmental

15.00 t mm tdiakimedium

Rmt 100 t Duty l t 864.00 Rmt

Lowering, laying and jointing G. I. pipes with G.

I. specials of following diameters in

proper position, grade and alignment as

12.00 Rmt 34.00 Rmt

directed by Engineer-in-charge including

conveyance from stores to site of work, labour,

giving hydraulic testing, etc. comple

Lowering of openwell Horizontal Submersible

pump sets/bore well pump sets in Well/Sump

with HDPE pipe/GI/MS column pipe by

means of chain pulley block/fixture & jointing

the cable with fuse unit / Control panel board

including fitting accessories & making it in

working condition including satisfactory testing.

Above 7.5 to 20 HP

(B-Mech SOR, Sec-E,It.No.51 (B) , P.no.93)

Providing and erecting 240 V MCB double pole

switch for motor and inductive load ( C Curve)

having 10 KA breaking capacity and confirms to

IS 8828 in existing box having capacity 32 Amp

Qty. Unit Item Rate Per Amount Rs.

Providing and supplying ISI mark CI D/F Reflux

Valves as per IS:5312 (Latest Edition) of

following class and diameter including all taxes,

1.00 No insurance, transportation, freight harges, 3946.00 No

octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking

Lowering, laying and jointing in position

following C. I. / D/F Reflux valves, Butterfly

1.00 No valves, Sluice valves and Air valves including 400.00 NO

cost of all labour, jointing material, including

nut bolts and giving satisfactory hydraulic

testing etc complete

Supply of specials for Jointing pipe line as per

actual requirement incl. all taxes etc complete.

1) 100 mm dia MS Pipe Clamp with fitting

1.00 No accessorries 800.00 No

2) 100 mm dia H.D. GI coupling (100 mm

2.00 No length, 8 TPI thread as per IS 250.00 No

5.00 No 3) Teflon tape 37.00 No

Providing dust and vermin proof Mild Steel

Cabin having two compartment one for panel

board and other for GEB meter and fuse unit

with required locking arrangement , minimum

degree of protection IP 52 as per IS

fabricated from CRCA sheer steel minimum

thickness for base frame/channel/gland plates

for 3 mm for load bearing

members ,1.6 mm for ineternal members

including cutting,bending,drilling,welding,

riveting with ineternal partitions.The sheet steel

enclosure shall be powder coated

as per applicable standard with shade as

required with finish thickness of paint film not

less than 80 microns.The Cabin have following

Water and Sanitation Management Organization Arvalli

Providing, lowering, laying and jointing of 110 mm dia PVC Rising main pipe line

Qty. Unit Item Rate Per Amount Rs.

(1) Providing and supplying in standard length ISI

mark high density polythylene PVC pipes suitable

for potable water as per IS specification no.

4984/1995 nclduing all local and centaral taxes,

transportation, freight charges, octroi, inpsection

charages, loading, unloading, conveyance to

departmental store etc. comp.

445.00 Rmt Rising Main 110 mm dia PVC 6 Kg/cm2 199.00 Rmt

Providing and supplying necessary PVC specials

for required size incl. all local taxes etc comp.

(a) PVC Elbow (Moulded)

5.00 No 110mm dia. 358.00 NO

2.00 No 90mm dia. 216.00 No

(b) PVC Tee (Moulded)

(c) PVC Reducer (Moulded)

Excavation for pipe line trenches including all

safety provision usng site rails and stacking

excavated stuff up to a lead of 90 M, cleaning the

site etc complete for lifts and strata as specified.

0.00 to 1.50 Mt depth

195.53 Cum (A) In all sorts of soil and soft murrum 89.00 Cum

4.73 Cum (B) Cutting of Road : c.c 1:2:4 or RCC 372.00 Cum

Lowering laying and jointing PVC pipes and

specials of following class and diameter including

cost of conveyance from store to site of works

including cost of labour, materials giving

satisfactory hydraulic testing etc comp

445.00 Rmt Rising Main 110 mm dia PVC 6 Kg/cm2 19.00 Rmt

Qty. Unit Item Rate Per Amount Rs.

Refilling the pipe line trenches including ramming,

watering, consolidating disposal of surplus stuff

as directed within a radius of 3.0 km

191.30 Cum 22.00 Cum

Providing and supplying CI Air valves of approved

make & quality of following class and diameter

including all taxes, insurance, transportation,

4.00 No freight charges, octroi, inspection charges, 717.00 No

loading, unloading, conveyance to departmental

store, stacking etc complete.(25mm)

Lowering laying and jointing in follwing Air valve

4.00 No including cost of labour,jointing materail,including 56.00 No

nut bolts and giving satisfactory hydralic testing

Labour charges for repairingof leakage in PVC

pipeline of folling dia meter at different places

including necessary excavation manually or by

mechanise excavation, dewatering removing of

mud, cleaning of pipe and leakage portion,

cutting the pipeline & removing piece of pipe

from trench with inclussive of mechanical devices

JCB, Hydra/Crain if necessary & labours required

with providing material such couplers, solution

5.00 No etc. comp. (incl. all material but Exclu. cost of 978.00 No

Name of work :- Making job connection with stand providing G.I. pipe and Sluice valves, necessary GI specials incl.

all labour charges.

Item Qty Rate Amount

150 mm dia G.I. pipe medium duty Rmt 5 1355.00

100 mm dia G.I. pipe medium duty Rmt 9 864.00

Lowering, laying and jointing G. I. pipes with G. I. specials of

following diameters in proper position, grade and alignment as

directed by Engineer-in-charge including

conveyance from stores to site of work, labour, giving hydraulic

testing, etc. comple Rmt 9 34.00

Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection harges, loading, unloading,conveyance to

departmental stores, stacking etc. complete. PN-1 With hand

wheel /cap operated (PD type short body)- 100mm Dia

Providing and supplying ISI mark CI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter

including all taxes, insurance, transportation, freight charges,

octroi, inspection harges, loading, unloading,conveyance to

departmental stores, stacking etc. complete. PN-1 With hand

wheel /cap operated (PD type short body)- 80mm Dia

Lowering, laying and jointing in position following C. I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, including nut bolts No 2 439.00

and giving satisfactory hydraulic testing, etc. complete. 100 mm

Lowering, laying and jointing in position following C. I. / D/F

Reflux valves, Butterfly valves, Sluice valves and Air valves

including cost of all labour, jointing material, including nut bolts

and giving satisfactory hydraulic testing, etc. complete. 80 mm

dia No 9 400.00

Bend : 100mm No 5 425.00

Bend : 80mm No 18 220.00

Flange 100 mm dia No 6 220.00

Flange 80 mm dia No 22 160.00

Excavation for Header =2.0X0.6x1.0 Cu.m 1.2 89.00

Foundation PCC 1:4:8 =2.0X0.60X0.15 Cu.m 0.18 3054.35

Foundation of Header Wall Brick wall in CM 1:6

Length = 2.0mtr. Cu.m 0.72 3054.35

Width = 0.60mtr.

Height = 0.60mtr.

Above Foundation

Length = 2.0mtr. Cu.m 0.6 3054.35

Width = 0.30mtr.

Height = 1.0mtr.

Plaste For Wall = 2X0.30X1 Sq.m 0.6 183.57

Plaste For Side wall= 2X3.0X1 Sq.m 6.0 183.57

Plaste For Top wall= 2X0.30 Sq.m 0.6 183.57

Name of Work : Providing, construction and fixing individual House connections

arrangement At Kudol

Ta:-Modasa District : Arvalli

Rate Amount (in

Qty Unit Particulats (in Rs) Per Rs.)

MATERIALS ITEMS

Providing and suplying in true

line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water

including fittings make PRINCE

/ SUPREME / ASTRAL / FINOLEX

or equivalent as approved by

Engineer In Charge.

8.00 Rmt (a) 15 mm dia UPVC pipe 25.00 Rmt

Purchasing and supplying at site

of work G.I./P.V.C. specials as per

requirement incl. Railway freight,

loading, unloading and carting

from store to site. Sales tax,

insurance, octroi,GST etc.

4.00 No (1) UPVC Coupling 15 mm dia. 10.00 No.

4.00 No (2) UPVC Elbow FT/MT 15 mm dia. 10.00 No.

1.00 No (3) Iron bib tap 15mm. Dia 50.00 No.

1.00 No dia.Service Saddle No.

4.00 (5) 15 mm Dia Upvc Clamp 5.00 No.

Excavation for pipeline trenches

(a) In all softs and soil and soft

0.68 Cum murrum 89.00 Cum

Lowering, laying and jointing PVC

pipes and specials of following class

and diameter including cost of

8.00 Rmt conveyance from stores to site of 5.00 Rmt

works including cost of labour,

material, except cement solvent,

giving satisfactory hydraulic testing as

Item No. 5 Refeling

Refilling the pipe line trenches

including ramming, watering,

consolidating disposal of surplus stuff

0.66 cum as directed within a radius of 3 km. 22.00 cum

0.23 Cum Cutting of Road : c.c 1:2:4 or RCC 372.00 Cum

0.000 Cum IPS Cutting 365.00 Cum

Making hole for Fitting saddle in

to Existing pipe(110/90/63/50

mm) or New laying pipe.

Lowering, laying and jointing

dia.Service Saddle including cost

of conveyance from stores to site

of works including cost of labour,

material, with cement solvent,

giving satisfactory hydraulic

Total No Of House Hold- 470 nos Total Rs