Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAdmitted-Finance | ₹3.1 Cr | L1 | Admitted-Finance |
| 2 | Rejected-Technical | - | - | Rejected-Technical Reject |
| Sl No | Description | Qty | Unit | M/s Balaji Construction (M180103155327103) L1 |
|---|---|---|---|---|
| 1.00 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 48,431.25 | Cum | 28 ₹13,56,075 Lowest |
| 2.00 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade /modified bitumen) Binder
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. By Mechanical Means Bitumen (VG-10) MoRD SOR no | 48,431.25 | Cum | 310 ₹1,50,13,687.5 Lowest |
| 3.00 | Seal Coat
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. By Manual Means Case - I : Type A Bitumen (VG-10) | 48,431.25 | Cum | 175 ₹84,75,468.75 Lowest |
| 4.00 | Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 1,230 | Sqm | 560 ₹6,88,800 Lowest |
| 5.00 | Maintenance of Earthen shoulder (filling with fresh selected soil)
Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903. | 36,553.75 | Sqm | 140 ₹51,17,525 Lowest |
Tender Value
Refer Docs
EMD Value
₹3.8 L
Closing Date
2 Jun 2026, 12:00 pmClosed
SE 12TH CIRCLE PWD PAURI
SE 12TH CIRCLE PWD PAURI
Renewal work by Premix Carpet from Km 28.00 toKm 42.00 on the Chillarkhal Sigaddi KotdwarPakhro Motor Road in Kotdwar Assembly Constituency, District PauriGarhwal under Annual Maintenance for the year 2026-27
2026_pwd_95549_2
1923/141yata 12/2026-27 date 04-05-2026
Open Tender
Civil Works
Item Wise
180 days
dugadda
as per technical bid
3 documents required · 3 mandatory
₹5,900
ee cd pwd dugadda
₹3.8 L
SE 12TH CIRCLE PWD PAURI
17 Jun 2026
18 May 2026
3 Jun 2026
18 May 2026
2 Jun 2026
23 May 2026
28 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Hill Side Drain Clearance
(Removal of earth from the choked hill side drain and disposing it on the valley side manually) | 10,000 | Rmt | - | - |
| 2 | Maintenance of Earthen shoulder (filling with fresh selected soil) Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 | 3,123.75 | Sqm | - | - |
| 3 | WBM Grading 3- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Manual Means | 114.75 | Cum | - | - |
| 4 | Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 | 1,530 | Sqm | - | - |
| 5 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. | 1,530 | Sqm | - | - |
| 6 | Bituminous Macadam
Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. (Bitumen VG-10 @ 3.3% of the weight of mix has been used for analysis purpose. The choice of bitumen will depend upon the prevailing site conditions and shall be in accordance with Clause 504 of MORD) with Bitumen VG-10 | 255 | Cum | - | - |
| 7 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 54,570 | Sqm | - | - |
| 8 | Providingand laying Semi Dense Bituminous Concrete with the use of batch type HMP producing an average out put of 75 tonnes per hour using crushed aggregates of specifiedgrading , premixed with bituminous binder and filler, transporting thehotmix to work site, laying with ahydrostatic paver finisher with sensor control to the required grade, level and alignment, rollingwithsmoothwheeled, vibratoryand tandemrollers to achieve thedesired compaction as per MoRTH specification clause No. 508 complete in all respects Grading II - 10mm using VG - 10 bitumen (bituminous binder @ 5 % of mix | 1,364.25 | cum | - | - |
| 9 | Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. | 2,720 | Sqm | - | - |
| 10 | Construction of scupper | - | - | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
BOQ_112977.xls
BOQ • 0.32 MB
tech.pdf
Tender Documents • 0.73 MB
2512.pdf
PDF • 0.29 MB
2251.pdf
PDF • 0.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].