Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹10 L
EMD Value
₹7,500
Closing Date
19 Oct 2026, 7:00 pm2d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Ex.Eng (O&M) Valsad Rural Division
Supply, installation, testing and commissioning earthing system for transformer center with maintenance free ready capsule pipe in cage (PIC) type earthing and connection to various parts of transformer center using GI strip and GI nut bolts at Dungri sub division under valsad rural division.
354079
DGVCL/VALSAD-R DO/E-TENDER/2026-27/106
Open
Miscellaneous Works
Works
Valsad
8 documents required · 8 mandatory
₹885
DGVCL, Payable Valsad
₹7,500
9 Oct 2026
9 Oct 2026
9 Oct 2026
19 Oct 2026
9 Oct 2026
No. Description of items UNIT Qty Rate (Rs) Amount (Rs)
Supply, Installation, Testing and Commissioning of
Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic) Type,
Earth Electrodes for HT Feeder Pole Having 2000 mm
Electrode Length as per the Tender Specifications and
Drawing. (All Materials Will Be Supplied By Agency)
2 Supply, Installation, Testing and Commissioning of Nos.
Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic) Type,
Earth Electrodes for HT Feeder Pole Having 3000 mm
Electrode Length as per the Tender Specifications And
Drawing. (All Materials Will Be Supplied By Agency)
3 Supply and Installation of 25 X 3 mm GI Strip having hot dip- Meter
galvanized-zinc coating of 80-100 microns without any joints
or welding. Both the end of the GI strip should be connected
with GI nut bolts and required fabrication work for giving
separate earthing connections to
(1) Neutral of the transformer
(2) MS structures of the transformer center (Approximately
25 meter GI strip per transformer centre
- as per requirement and instruction of Engineer in-
charge) (All Materials will be supplied by Agency)
4 Supply and Installation of uPVC standard make Pipe of 1.25" Meter
diameter for covering GI strip with UV protected Cable Ties
of 550 X 7.6 mm size to bind with pole face(Approximately
25 meter uPVC pipe for GI strip covering per transformer
centre -as per requirement and instruction of Engineer in-
ERECTION OF COIL TYPE EARTHING INCLUDING COST OF
COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER
STANDARD SPECIFICATION(20kg
solt+20kg coal)
ERECTION OF GI PIPE/CI PLATE TYPE EARTHING
INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT COST OF
PIPE/GIPLATE GI WIRE AS PER STANDARD
SPECIFICATION.(20kg solt+20kg coal)
Total of schedule B
The rates are inclusive of PF and Exclusive of GST applicable
Total Rs.: Ten Lacs Only GST Extra
❖ Above shown quantity may vary as per requirement
❖ The work is to be carried out strictly as per specification of company and as per instruction of Engineer in
❖ First work is to carried out on 500 kva/200 kva/100
❖ ERDA tested certificate should be submitted and material of ERDA tested certified to
❖ Above rates are inclusive of supply & transportation of new material.
❖ Work should be carried out as per instruction of Engineer in charge.
❖ During execution of work if any accident / Damage occurred then contractor will be
liable for that.
❖ Submit testing certificate of Chemical Back fill Compound.
❖ Submit G.I. Earthing Electrode testing certificate
❖ Submit the earth resistance testing report of each location.
❖ Produce copy of material purchase bill.
Executive Engineer (O&M)
Valsad Rural Division.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GENERAL TERMS and CONDITIONS.pdf
Notice Inviting Tender.pdf
Schedule-B.pdf
TECHNICAL BID.pdf
TECHNICAL SPECIFICATIONS FOR THE WORK.pdf
DRAWING OF PIPE - IN - CAGE EARTHING.pdf
PIC ERTHING Drawing GPRD .pdf
Tech Specification.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .