Construction of New CR Bldg (7+3 Span),Yard Cable Trench & Misc.Civil Works at 66 KV Ranakandorana SS under AM Division Ranavav under Jamnagar Circle- Re Invite

Name of work :- Construction of New CR Bldg (7+3 Span),Yard Cable Trench & Misc.Civil

Works at 66 KV Ranakandorana SS under AM Division Ranavav under Jamnagar Circle- Re

Description Unit Rate Amount

[A] DEMOLITION & DISMENTELING

1 Demolition of brick work and stone masonry

including stacking of serviceable materials and

disposal of unserviceable materials with all

2 Demolition of Unreinforced cement concrete

including stacking of serviceable materials and

disposal of unserviceable materials with all

3 Demolition of R.C.C. work including stacking

of serviceable materials and disposal of 75.00 CMT 1123.00

unserviceable materials with all lead and lift.

4 Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all

5 Dismentling doors, windows, ventilators etc.

(wood or steel or alluminium) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3Sq.M.

6 Dismentling doors, windows, ventilators etc.

(wood or steel or alluminium) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them

within all lead and lift.(i) exceeding 3Sq.M. in

7 Dismentling C.I. pipes G.S.W. pipes abd A.C.

rain water pipes with fittings and clamps

including stacking the materials with all lead

and lift ( for any dia, of pipe)

8 Dismantling santtary fittings like washbasin.

W.C. pan Indian and European type, flushing

tank etc. including stacking the materials with

all lead and lift.

[B] EXCAVATION, FILLING AND EARTH WORK

9 Excavation for foundation up to 1.5 Depth

including sorting out and stacking of useful 324.00 CMT 534.00

materials & Refilling the sides of the trenches

and disposing of the excavated stuff up to any

lead - Any type of soil / soft rock / hard rock

10 Excavation for foundation from 1.5m to 3.5m

Depth including sorting out and stacking of

useful materials & Refilling the sides of the

trenches and disposing of the excavated stuff

up to any lead - Any type of soil / soft rock /

11 Filling in plinth/trenches & yard with excavated

earth in layers not exceeding 200 mm, thick

layers including watering, ramming,

consolidating etc., complete as directed by

EIC. - Excavated earth from foundation. The

item rate includes all leads & lifts.

12 Providing Filling in foundation and plinth with

murrum or selected soil brought from outside in

layers of 20cm. thickness including watering,

ramming and consolidating etc. complete as

directed by EIC. 755.00 CMT 304.00

Note: 25 % of the successive bill amount

shall be retained till lapse of one full scale

monsoon and rectification of subsistence if

any to the design ground level

13 Earthwork in cutting in all sorts of soil and soft

murrum including conveying and spreading the

stuff, embankment as and where directed by 71.00 CMT 163.00

EIC from the end of the cutting with all required

14 Providing and Filling in plinth/trenches with

Sand under floor including spreading, watering,

ramming, consolidating etc., complete as 18.00 CMT 492.00

directed by EIC. - The item rate includes all

[C] CONSTRUCTION

(1) MASONARY WORK

15 Providing & laying White stone bela

masonary (including quoin blocks, jamb blocks

closer etc.) with White Stone Bela of approved 71.00 CMT 6167.00

size in foundation and plinth with cement

16 Providing & laying White stone bela masonary

(including quoin blocks, jamb blocks closer etc.)

with White Stone Bela of approved size for

Super Structure G.F+F.F+Stair Cabin

17 Providing Half Brick masonry in common

burnt clay building bricks having crushing

strength not less than 35 kg/Sq.m in cement

mortar 1:4(1 cement & 4 coarse sand) up to

plinth & two floors G.F+F.F+Stair Cabin. -

Conventional Bricks

(2) CONCRETE WORK

18 Providing and laying cement concrete 1:4:8 (1

Cement : 4 Coarse and : 8 black crushed stone

aggregate 40mm nominal size ) and curing

complete- Foundation and plinth.

19 Providing PLY WOOD form work shuttering so

as to give a smooth exposed finish including

centering (adjustable tubular steel supports).

Shuttering strutting and propping etc. for any

height of propping and centering below 86.00 SMT 285.00

supporting floor to ceiling , and removal of the

same for reinforced concrete and plain

concrete. for Footings , foundations and

20 Providing & laying control cement concrete M-

20 as per mix design exposed work with curing

etc. complete Excluding the cost of ply wood

shuttering form work & adjustable tubular steel 59.00 CMT 4117.00

supports / Props. & the cost of reinforcement.

For foundation Footing, base of column ,mass

21 Providing & laying control cement concrete M-

20 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel 1.00 CMT 10103.00

supports / Props. But excluding the cost of

reinforcement. For.G.F+FF & Staircasse -For

22 Providing & laying control cement concrete M-

20 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel 1.00 CMT 7911.00

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse -

23 Providing & laying control cement concrete M-

20 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse -for

Sill, Lintel, Chajja, Slab, Coping, other

cantilever portion

24 Providing & laying control cement concrete M-

20 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel 5.00 CMT 9383.00

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse - for

verticle walls.

25 Providing & laying control cement concrete M-

25 as per mix design exposed work with curing

etc. complete Excluding the cost of ply wood 33.00 CMT 4386.00

shuttering form work & adjustable tubular steel

supports / Props. & the cost of reinforcement.

For foundation Footing, base of column ,mass

26 Providing & laying control cement concrete M-

25 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel 25.00 CMT 10164.00

supports / Props. But excluding the cost of

reinforcement. For.G.F+FF & Staircasse -For

27 Providing & laying control cement concrete M-

25 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel 43.00 CMT 9453.00

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse -

28 Providing & laying control cement concrete M-

25 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse -for

Sill, Lintel, Chajja, Slab, Coping, other

cantilever portion

29 Providing & laying control cement concrete M-

25 as per mix design exposed work with curing

etc. complete including the cost of ply wood

shuttering form work & adjustable tubular steel 23.00 CMT 9412.00

supports / Props. But excluding the cost of

reinforcement For.G.F+FF & Staircasse - for

verticle walls.

30 Supply, Installation and fixing in position of Fuji

silvetrech or its equivalent make Precast RCC

Cable trench having size of 600 mm wide and

600 mm depth thickness of wall 65 mm at top

and top PSC cover. RCC cable trench & cover

provided as per drawing, manufactured with

self compacted concrete, rate included, jointing

with GP2 or it's equivelent griuting mortar,

drilling hole when as required for cable passing

with core cuttuer with top PSC cover, RCC cable

trench, Fixing as per instruction of engineer in

Precast U (600 X 600 )Shape Drain T 6 for

(11kv Power Cable Trench). Width and Depth of

each section for required quantities shall be as

per below table. The product should be meeting

BIS requirements.. Product shall have load

carrying capacity - 4.8 Tonnes made by using

advanced precast technology having High

Performance Self Compacting Concrete of M50

grade and Fe 500 D grade TMT steel

reinforcement bar.

The product shall have tie shape groove of 10-

20 mm width X 25 mm depth on both sides of

each precast unit product for jointing two

precast units. The Precast U Shape drain

should have special in built insert at appropriate

location for fixing De-Shackle for mechanical

installation, including supply, transportation at

31 Providing & Fixing in position as per approved

drawing TMT steel reinforcemnet bars FE

500D, confirmong to IS 1786 in RCC work

including Cutting,bending, binding with

gauge annealed wire, of bars as per IS

requirenment If necessary and placing in

position etc. completed for RCC work. etc

completed as directed by EIC.

(3) PLASTER WORK

32 Providing 15mm thick cement plaster single

coat on masonary / bela / concrete wall / ceiling

for plastering up to any floor level finished even

and smooth in cement mortar 1:3 (1 Cement :

sand) finished with floating coat of neat

33 Providing 15mm thick smooth/Sand face

cement plaster on walls in single coat on fare

side masonary/bela/concrete wall/ceiling up to 79.00 SMT 240.00

any height and finished even and smooth in

C.M. 1:3 (1 cement : 3 sand) etc. complete.

34 Providing 20mm thick sand face cement

plaster on wall up to height 10 meters above

ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1 cement : 3 sand) and 8mm

thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete.

35 Providing & fixing 18 gauge wire mesh jali

having width 200 to 300 mm with nails before

finishing the surface with plaster. The item

includes providing necessary scaffolding also)

36 Providing cement vata (10cmx10cm size)

quarter round in cement mortar 1:1 including 206.00 RMT 24.00

neat cement finishing watering etc. complete.

37 Providing and Applying two coats of Birla or

Asian actrylic lappy (putty) and two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade 779.00 SMT 40.00

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

38 Providing distempering (three coats) with oil

bound distemper of approved brand and 719.00 SMT 110.00

manufacture and of required shade on

undercoated wall surface to give an even shade

over and including a priming coat with distemper

primer of approved brand and manufacture after

thoroughly brushing the surface free from

mortar droppings and other foreign matter and

also including preparing the surface even and

sand papered smooth.

39 Providing and Applying 1(One) Coat of

SMARTCARE PRIMERO and 2(two) coats of

APOCOLITE APEX plastic emulsion paint or its

equivalent Wall painting of approved brand and

manufacture And GETCO Approved Shade on

undercoated wall surface to give an even

shade. The work included thoroughly

brushing/cleaning the surface free from mortar

droppings and other foreign matter and also

including preparing the surface even and

smooth by sand paper or any other approved

40 Providing & applying 3 coats of ACID/ALKALI

resisting paint of approved shade & make to

wall, ceiling including filling putty smoothing the 53.00 SMT 131.00

surfaces scaffolding etc. complete as directed

41 Providing and laying approved quality polished

Kotah stone slab(25mm th. and 600mm x

600mm in size) flooring including using

35x25mm approved quality machine cut,

marble strip over 20mm (average) thick base of

cement mortar 1:6 (1 cement : 6 course sand or

L.M. 1:1.5 laid over and jointed with grey cement

slurry including rubbing and mirror polishing

using polishing machine with grinding six

emery's of different no. including using special

chemical powder for polishing including white

cement coating two times during polishing for

filling up minute holes or cracks in joints etc.

complete. The item rate includes the removing

the existing flooring including base concrete,

throwing the stuff as & where directed upto any

lead. Etc. complete as directed by E.I.C. The

waste material will be property of contractor.

42 Providing and laying polished Kota stone slab

25 mm th. in risers of steps, Dedo and sills laid

on 10 mm thick CM 1:3 & jointed with grey 36.00 SMT 1187.00

cement slurry including rubbing and polishing

43 Providing and laying 24"x24" Vitrified 8 to

mm thick tiles (600mm x 600mm) or (300mm

x 300mm) -JOHNSON / KAJARIA / NITTCO / 29.00 SMT 1109.00

SIMPOLO or its equivalent, flooring over

20mm(Average) base of Cement Mortar 1:6 (1-

Cement : 6 Coarse Sand) on new surface or

fixing on existing flooring by adhesive materials

and also for skirting and dedo on 10mm thick

cement plaster in 1:3 including dismentalling of

existing flooring and jointed with colour cement

slurry including finished with flush pointing &

cleaning the surface etc complete for light shade

44 Providing and laying color glazed tiles-

JOHNSON / KAJARIA / NITTCO / SIMPOLO or

its equivalent make 300mm x 450mm x 8 to

mm thick in flooring & Dedo laid on bed of 12mm

thick cement mortar 1:3 (1 cement : 3 course

sand) & fixing the same in cement & providing

12mm thick back coating of cement plaster in

CM 1:3 for base, filling the joints with white/color

cement neatly finishing the joints curing etc.

(6) DOORS AND WINDOWS

45 Providing and fixing fully glazed / partly glazed

double leaf 20 micron thick colour anodized

aluminium door with following listed extruded

section manufactured by Jindal luminium Ltd. &

other accessories,the Alluminium sections are

of HE9WP Group: (1) with door outer frame

section of 63.5 x 38.1 x 3.18 mm thick weighing

1.777 kg/Rmt (J4605) (2) Door shutter vertical

style (meeting style) of 53.7 x 44.45 x 2.30mm

thickness (J4537) weighing 1.238 Kg/m (3)

Hinge side 53.7 x 44.45 x 2.30mm thickness

(J4540) weighing 1.173 Kg/Rmt (4) Bottom rail

of size 150 x 44.45 x 2.40mmthickness (J4538)

weighing 2.376 Kg/Rmt (5) Lock rail of size

x 44.45 x 2.40mm thickness (J4549) weighing

1.679 Kg/Rmt (6) Top rail of size 47.62 x

x 3.18mm thickness (J4506) weighing

Kg/Rmt (7) Ventilator middle member (if 12.00 SMT 3814.00

required) 49.91 x 44.45 x 3.00mm thickness

(J4621) weighing 1.495 Kg/ Rmt (8) Aluminium

handle 127.00 x 37 x 3.65mm thickness (J4483)

weighing 1.912 Kg/No. (9) Tower bolt 250mm

long (J4954) (10) Aluminium bending mortice

lock (J4420) (11) Top panel using 6.0mm thick

Triveni or Modi or Saint Gobain make float glass

fixed with PVC Clear gasket (12) Bottom panel

using 4mm thick exterior aluminium sheet board

of make approved by the Engineer - in - Charge

(for partly glazed door) fixed with virgin PVC

clear gasket (13) Hydraulic floor mounted spring

godrej or equivalent of make approved by the

Engineer - in – Charge. with all other required

fixtures and fastening of colour anodized with

aluminium beading, with all labours and

materials etc. complete as directed by EIC.

Aluminium section user for fixing hinges, door

closer, etc. shall be filled with country teak wood

to receive screws.

46 Providing and fixing window having extruded

aluminium 20micron thick colour anodized

section frame main outer size

63.50x38.10x1.95mm (of Jindal Section no:4605, @

wt 1.094Kg/Rmt), horizontal two track member size

61.85mm x 31.75mm x 1.20mm(of Jindal Section

mo: 8687 @ wt of 0.695 Kg/mt), vertical member of

size 61.85mm x 31.75mm x1.30mm(of Jindal

section no: 8758 @ wt of 0.659 Kg /mt) with Sliding

Shutters of horizontal member Size 40mm x 18mm

x 1.29mm(of Jindal section no: 8949 @ wt of

0.456Kf/mt), vertical member of size 40mm x 18mm

x 1.29mm (of Jindal Sectio: 8947 @ wt 0.457 Kg/mt,

section 8948 @ 0.457kG/mt) with 5 mm thick

transparent bronze colour/white tinted float glass

with aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for Window.

47 Providing and fixing approved quality 20micron

thick color anodised aluminum ventilator having

frame size 63x38.10 mm having thickness 1.20mm

& weighing 0.643 kg/rmt approx standard aluminum 2.00 SMT 1164.00

extruded anodized frame having panel of 5mm

thick white/brown glass fixed horizontal louvers in

aluminum channel as per details drawings.

48 Providing & fixing approved quality FRP door

having FRP frame of size 100x50mm & 28mm

thick FRP shutter with Depressed Panel

shutter having extra reinforcement on side and

edges and in Gel coat finish. The core of the

shutter is to be filled up with injected fiber

extinguishing grade polyurethane foam done in

situ along with embedded wooden pieces for 6.00 SMT 2354.00

stiffening and also for fixing hinges and fixtures.

The whole FRP frame and shutter is to be water

proof, weather proof, termite proof and

resistance to mild acid/Alkali resistance

including SS hinges with necessary screws and

aluminum fixture and fastenings etc complete.

28mm th. shutter & 100x50mm frame.

(7) FABRICATION ITEMS

49 Providing and fixing approved quality rolling

shutters of approved make and made with crane

handle as per IS 6248 -1979 having 18 gauge

sheet thickness and 80mm wide M.S. Laths

interlocked together through their entire length

and jointed together at the ends by end locks 12.00 SMT 5305.00

mounted on specially designed pipe shaft with

bracket plates guide channels and

arrangements for inside locking with push pull

operation with gear mechanism complete

including the cost of hood cover with one coat of

red oxide primer followed by 3 coats of oil

painting of approved shade & tint etc complete

as directed by E.I.C (The measurment shall be

paid for wall opening plus drum only) (A) Shutter

having width below 3.5 meter.

50 Providing & fixing MS Grill of approved quality

& design weighing 25 to 30 kg/SMT. as per

drawing & as directed with necessary grill door

(if required) including welding or bolted fixtures

and fastening. etc. with 3 coats of oil painting

of approved shade & tint with one coat of red

oxide primer including grouted hold fast in CC

(1:2:4) etc. complete as directed by EIC.

51 Providing and fabricating and placing approved

quality steel work welded Hot dip galvanizing

as per IS-2633/72 & 209 of 1966 or latest

amendment, etc complete in built up sections,

framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead

paint :-(A) In beams and joints channels angles,

tees, flats with connecting cleats as in main and

cross beams, hip and jack rafters, purloins

connected to common rafters etc.

52 Providing & fixing pre-cast coloured Rubber

Dye inter locking concrete block block 60 mm

thick with grade of concrete M300 pnumatic

compressed by mechanically pressed and as 468.00 SMT 701.00

per approved design including 75 mm sand

layer for leveling and filling the joint with sand in

proper line and level etc complete.

53 Providing & placing 50mm thick & 300mm wide

Prestressed Concrete Cover (for clear span of

up to 1.2 meter in proportion (1:1:5:3) or M-20

necessary reinforcement or 4mm dia HT steel

wire-4 Nos. bars and 4mm dia. distribution bars

at 150 mm C/C as per drawing & design & 11.00 SMT 535.00

vibrating with vibrators. Finishing all the

surfaces, curing by placing in water pond for ten

days etc. complete as directed by E.I.C. ( The

rate includes cost of all material required, labour

charges, transportation, loading, unloading etc.

54 Providing and applying water proofing treatment

by following procedure mentioned here under.

(1) Surface preparation by cleaning dirt, dust

and loose Particles by mechanical cleaning by

grinder and then after mechanical cleaning use

air blower to remove all dust & dirt after 338.00 SMT 729.00

cleaning hammering test and crack filling (6 mm

to 10mm) by mortat and polyurethen sealant

including Patch work repairing by polymer

mortar or GP-2, pressure grouting, geofabric,

waterproof tape etc. are supply by contractor if

require.(2) Waterproofing treatment include,

Step-1) Providing and applying primer

application of Providing and applying primer

application of aquastop base solvent base

polyurethane primer as per manufacture

specification and as directed by EIC. Step-2)

After applying priming coat, apply two coats of

Aquastop extraflex as per manufacturer

specification and as directed by EIC. Step-3)

After applying two coat of aquastop extraflex,

apply one coats of Aquastop protect as per

manufacturer specification and as directed by

EIC (3) After completion of work pond testing

testing with fill water 50mm for 7 Days to be

carried out. The treatment is to be carried out up

to 300 mm on vertical wall as vata. The

measurements shall be given only for clear area

of terrace excluding the area of vatta. The

contractor shall submit performance guarantee

of the waterproofing in the form of BG / DD at

the rate of 20% of cost of executed item of work

order for a period of 7 years from actual date of

completion of work on stamp paper of

appropriate value in approved format of

GETCO. (Special note : Water proofing

treatment must be carried out by approved

vendors of manufacturer i.e. Kerakoll or it's

equivalent manufacturer)

55 Providing & applying anti termite treatment, as

per IS 6313 (Part.II & II 2001) for building works

in pre construction & post const. stages, using

chemicals conforming to relevant IS in water

emulsion and effective when applied uniformly

over the area to be treated. The chemical to be

used is chlorophriphos 20% EC or its

equivalent. The treatment is to be carried out

as per the procedure mentioned below and

treated plinth surface area is to be taken for

measurement. (with performance guarantee for

5 years)a)For pre construction treatment: For

plinth filling & periphery holes in side plinth to be

drilled 300MM C/C each having depth 1.5M and

for inside plinth the hole are to be treated with

diluted chemical solution, 1.5 lit. per hole, in the

ratio of 1:20. For periphery i.e. out side plinth

the ditch is to be treated with diluted solution

2.25 litre per rmt. In the ratio 1:20. The entire

surface area is to be treated with diluted solution

of dose 2.5 litres per smt. over and above as a

plinth surface treatment.

56 Providing & fixing approved quality 300x300mm

size marble year plate with black border all

round & letters including fixing the same in

cement mortar etc. comp. As directed by EIC.

57 Drilling of Bore holes 32mm to 40mm dia by

means of compressor machine having depth of

hole up to 1.00 to 1.20 mt. as decided by

Engineer in charge & as per drawing in all sorts

of Soil, sand, clay, hard rock etc. truly vertical to

existing land with cleaning the same by air &

Grouting of Bores holes by means of Cement,

sand, Grit, etc. with utilization of aluminum

powder or ACC shrink compound ‘N’ grout or 174.00 RMT 446.00

equivalent any other bonding material as

approved by competent authority in suitable

content with mixing ramming curing etc.

complete including with 20mm dia. of M.S.

Anchor bar having minimum length of 1.70 mt

(Reinforcement) ( The rate includes the cost of

MS Anchor bar) as directed by Engineer in

[D] WATER SUPPLY AND DRAINAGE & MISC.

58 Providing, laying and jointing in true line and

level 15 mm diameter UPVC pipe (SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two meter c/c or shall be concelled as

directed including necessary fittings, fastening,

fixtures, excavation and back filling. The rates

includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost

of all materials.

59 Providing, laying and jointing in true line and

level 25 mm diameter UPVC pipe (SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two meter c/c or shall be concelled as

directed including necessary fittings, fastening,

fixtures, excavation and back filling. The rates

includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost

of all materials.

60 Providing, laying and jointing in true line and

level 40 mm diameter UPVC pipe (SCH-40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent 92.00 RMT 147.00

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two meter c/c or shall be concelled as

directed including necessary fittings, fastening,

fixtures, excavation and back filling. The rates

includes testing of pipe and jointing and fixing

the same with adhesive solvent, including cost

of all materials.

61 Providing & laying rigid 6 kg/cm2 PVC drainage

pipe 75mm dia. including necessary fittings like

bend, tee,Y bend plug etc. fixed with wall by

means of clamps & nails with water tight joints

by approved solution etc. complete as directed

62 Providing & fixing FINOLEX or equivalent brand

approved quality rigid P.V.C. pipe for Rain water

4 kg/cm2 including necessary fittings like bends,

shoe, cowl etc. & fixing the pipes to the wall in

plumb by means of G.I. Clamps of 18 gauge

sheet at 1 to 1.5 meter distance, filling the joints

with approved solution complete as directed by

E.I.C. - 90 mm Dia.

63 Providing & laying rigid 6 kg/cm2 PVC drainage

pipe 110mm dia. including necessary fittings

like bend, tee,Y bend plug etc. fixed with wall by

means of clamps & nails with water tight joints

by approved solution etc. complete as directed

64 Supplying and fixing reinforced concrete heavy

duty non-pressure pipes with collars for culverts

including necessary excavation & refilling the

trenches, joining, the pipes with C.M. (1:1) & 48.00 RMT 874.00

filling 150mm thick concrete (1:4:8) below joints,

curing etc. completed as directed by E.I.C I.S.

Class NP3 of internal diameter 300 mm.

65 Providing and fixing approved quality PVC

SWR Nahani trap IS 14735 for drain 100 mm

diameter with jaliwith self cleaning design with

CI scread down or hinged grating including the

cost of cutting with additional aluminum

perforated jali cover & Pipe outside the wall with

plug, bend, and making good the walls etc.

complete as directed by E.I.C.

66 Providing and fixing approved quality S.W.

gully trap with C.I. Grating, brick masonry

chamber and water tight C.I. cover with frame of 4.00 NO 1279.00

300 mm x 300 mm size (inside) with standard

weight. (B) 150 mm x 100mm size P or R type.

67 Providing & fixing M.S. cover for cable trench in

control room made from 14 Gauge M.S. Sheet

having M.S. Angle frame alround of 40 X 40 X

5mm. size and cover shutter frame of angle 30 10.00 SMT 5303.00

x 30 x 5 mm size & 2 supports at middle

including oil painting of 3 coats of approved

shade & make. Providing 2 handles of 6mm. dia.

M.S. bar as per instruction etc., complete as

directed by E.I.C.

68 Providing & fixing approved quality light type

450X600 mm size FRP Manhole covers (Approx

wt.10.61 Kg & 5 T Capacity) with water tight FRP 3.00 NO 1163.00

Frame & fixing the same in concrete etc. complete

as directed by E.I.C.

69 Providing & fixing approved quality non-return

fullway wheel valve 40MM DIA UPVC make

PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge.

70 Providing & fixing approved quality non-return

fullway wheel valve 25MM DIA UPVC make

PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer in charge.

71 Providing and fixing approved quality screw

down bib tapes of following size: (A) Brass 10.00 NO 185.00

screw down bib tap polished bright 15mm dia.

72 Providing & Fixing approved quality a set of

Nos. of stainless steel coat racks of approved

quality fixed on 20 mm. thick teak wood batten 2.00 NO 457.00

including 3 coats of oil painting etc., complete

as directed by E.I.C

73 Providing & fixing approved quality light type

600X600 mm size FRP Manhole covers (Approx

wt.13.36 Kg & 5 T Capacity) with water tight FRP 1.00 NO 1198.00

Frame & fixing the same in concrete etc. complete

as directed by E.I.C.

74 Providing and fixing approved quality C.P.

Brass towel rod complete with C.P. Brass

brackets fixed to wooden plugs with C.P. Brass

screws. 600mmx20mm size

75 Providing and fixing approved quality 600mm x

450mm beveled edge mirror of superior glass

mounted on PVC moulded frame and fixed to 2.00 NO 851.00

wooden plugs with C.P. brass screws and

76 Providing & Fixing 450X400mm size Stainless

Steel approved brand Kitchen Sink Incl waste

pipe & Coupling etc; complete as directed by

(3) BORE AND WATER SUPPLY

77 Providing & fixing approved quality readymade

P.V.C. water tight storage tank of 1000 liters

capacity made from linear low density

polythene & low density polythene LDPF

product confirming to I.S. : 10146-1982 with

cover including providing & fixing one 20mm dia,

float valve ball-cock, one 20mm dia G.I. over

flow pipe of length up to 0.30 t. including making

all connection for inlet/outlet etc. complete as

directed by E.I.C.

78 Providing and fixing wash basin with single hole

pillar tap with tap with C.I. or M.S. brackets

painted while/colour including cutting holes and

making good the hole including pillar 2.00 NO 2416.00

tap,chromium plated bottle trap,stop cock,

fisher union, Brass waste pipe etc complet.

79 Providing and fixing approved quality European

PAN water closet squatting pan size 580mm

including providing and fixing Plastic seat cover

& jet sprey, 100mm size P or S trap jointing tap

with the pan and soil waste pipe and with G.I.

inlet connection for flush pipe with W.C. pan and

chromium plated brass half turn flush cock of

approved quality of 25mm dia etc. complete.

80 Providing and fixing urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe concealed outlet (A) 1.00 NO 1689.00

squaring plate pattern white earthenware

81 Providing B.B. Masonry inspection chamber

for underground CI inspection chamber and

bends with bricks heavy crushing strencth not

less than 35 kg/cm2 in CM (1:5), CI cover with

frame (light duty) 455mm x 610 mm internal

dimensions, total weight of cover with frame to

be not less than 38 kgs (weight of cover 23 kg

and weight of frame 15 kg). RCC top slab with 5.00 NO 3264.00

1:2:4 mix (1cement: 2Coarse sand : 4 graded

stone aggregate 20 mm size). Foundation

cocnrete 1:5:10, inside plaster 15 mm thick with

cement mortar 1:3 finished smooth with floating

coat of neat cement on walls and bed concrete

etc. complete. Inside dimensions 450mm x

mm up to 900 mm deep.

82 Providing 2500mm internal diameters & 4.00 Mt

deep soak pit including excavation in all types

of soil & soft rock & Hard rock & P.C.C. (1:4:8)

bedding 300mm thick below masonry and

450mm thick brick masonry in C.M. (1:6) up to

600mm height 350mm thick for further 600mm

& 230mm thick for remaining height honey

combed, plastering in C.M.(1:3) outside up to 1.00 NO

1.5mt height and 100mm thick RCC slab with

600x600mm CI having cover with frame, with

necessary reinforcement as per design & CI

vent pipe 1800mm long with brick masonry pillar

350x350x450 plastered all around filling 40 to

50mm brick bats up to 1.5Mt depth including

16mm dia MS"U" stages steps refilling including

disposal of the surplus excavated earth up to the

lead of 300Mt radius including 3 coats of white

or colour wash to all exposed finished surface

etc. completed as directed.

83 Steel Pipe Revolving Chair 5 Pagu Stand full

back U Form ( Heavy Moveable) - For Office of

Ranakandorana ss & 132KV Bhomiyavadar

84 Conference Table (Desk Table) Particle board

top choras paya Size : 8 x 3 x 2.5 Feets - For 1.00 No 19530.00

85 Computer Table Particle Board structure,

Keyboard drawer side ma 3 drawer. Niche 2 1.00 No 14225.00

shelf, upar 12 mm ghashel kach - For Office

86 Steel Pipe revolving chair computer - For Office 4.00 No 3510.00

87 Notice Board Size : 3 x 2 with glass sliding door-

For Control Room

88 File Rack Size : 6 x 3 x 1.25 Feet (Pattrivada

padada Box file mate)

89 Sofa For Office Size : 4 feet 1.00 No 57700.00

90 Steel teiniz lockers 18 Khanavada Size : 78 x

x 18 - For Store

92 Steel Pipe Revolving Chair 5 pagu stand full

back U Form (Standard) For Control Room

Total Civil Works Estimate (Part A)

SCHEDULE B - 1 : CONTROL ROOM

INDUSTRIAL ELECTRIFICATION

93 Providing and fixing of DBS as AC Panel - 1 for

CR of ISI marked Powder coated Pearl DBS of

ivory color , wall mounting, Double door

Distribution board of L&T, Heggar or higher

make fitted with 63Amp Phase Bus bar, Earth /

Neutral Bars and inter connecting wires with

removable bottom gland plates for all power 1.00 No 6738.00

cable entry from bottom with DIN Channel

,incoming contact and 1No. - 63Amp TPN MCB

'C' Series, 6Nos. - 20A SP MCB 'C' Series and

13Nos. -10A SP MCB 'C' Series All MCBs are

L&T, Anchor or Higher make only. Complete in

all respect and as per instruction of EIC.

94 Supplying & laying of following size Control/L.T

power cable of FINOLEX or equivalent ISI make

in readymade cable trench or by excavating in

any type of soil cable trench size 300mm wide

and 600mm depth and refilling the same as per

the direction of EIC. Item Includes the cable

laying up to termination box with clamps &

proper clamping of cable on gantries by GI pipe

& glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables . The L.T power

cable to be provided by contractor as under :As

per ISI 1554 (Part-I). 4 Core x 25 mm2

Aluminum cable -Armored, from LT panel board

(LTPB) to Yard Light AC MK (AC Panel-2)., AC

Panel 1 in C.R. and yard AC Box

95 Supplying & Laying Sub-main lines of 3X2.5

mm2 ( two for P & N and one for Earthing)

copper PVC insulated wier of ISI brand in

suitable standard make steel conduit pipe

having minimum 1.5 mm thickness of approved

brand with ISI brand with clmpes with it's

associated accessories for various circuits

amanating from AC panel 1.as per inst. of E.I.C.

96 Point wiring for control room tube lights, fans,

exhaust fans, fency lights, water tight bulck

head lights with PVC insulated 660 V grade

standard copper wire in ISI make GI conduct

pipe 20 mm dia and 1.6 mm wall thickness size

fitted with sadles on the wall/ceiling. Size of wire

shall be with 3C x 1.5 sq.mm PVC insulated

copper wire for phase and neutral and earth wire

[ Green] and 5 Amp Anchor/Roma or any

equivalent switch as per specification with

guage M.S. box. The box shall be covered with

3 mm thick decorative mat finish hylum sheet.

The work is all inclusive of supply and fixing of

required materials as afore said [ like GI

conduct pipe , sadles , swithces , Steel box

ceiling Rose , flexible copper wire etc] to

complete point wiring with each fixture to be

earthed by SWG-12 stranded copper conductor

having green color as per direction and

instructions of E.I.C.

97 Providing, fixing & termination for Emergency

D.C. supply arrangment. This job includs supply

& laying of 2C x 2.5 mm2 Copper arrmoured

cable from battery charger to SBDC, fixing &

providing SBDC & complete wiring with supply

of wire & D.C. lamp (110V D.C., 100 watt-4

Nos.) in standard steel conduit pipe as per inst.

98 Providing and Fixing points wiring in GI. Conduit

size 20 mm dia and 1.6 mm wall thickness with

single PVC insulated 2.5 Sqmm. copper wire of

ISI standard good quality using 1.5mm thick

suitable size ISI mark Anchor brand 15 Amp.

250 Volt, 5-pin plug socket as seperate plug

point with shock proof accessories incl.

indication lamp; erected on separate decorative

mat finish hylum sheet board on wall with

providing adequate green earthing wire as per

specification and instruction of Engineer

99 ---- Do ---- as above but with singal PVC

insulated 3Cx1.5 sq. mm.copper wire of ISI

mark plug socket for 5A domestic use separate 5.00 Point 814.00

plug pointas per direction and instruction of

100 ---- Do ---- as above but looped on same board

i.e. No separate board, plug socket for 5A

domestic use as per direction and instruction of

101 Providing and fixing of 1200mm celling fan

CGL/ORIENT/USHA make white colour with all

required accessories. Fan is to be purchased

from authorised dealer. Flexible wiring using

twin core double PVC 48/0.2 mm copper flexible

cord of suitable & approved make and size from

ceiling rose upto fan terminal & supply and fixing

of energy saver regulators, extra GI pipe of

required size and length for lowering of fan if

required as per instruction of EIC.

102 Providing & Fixing of 50 W LED Lighting Fixture

(CGL Cat No. LCTLR-50-FO-CDL 50W or

equivalent under Cat-II or above as per R&B

SOR), 4-core 2.5mm2 double insulated flexible 27.00 No 5059.00

strended wire should be used from control gear

fittings to approved SMC type junction box as

per inst. of EIC.

103 Providing and fixing of 41.5W LED Lighting

Fixture (CGL Cat No. LPFC-36-CDL 41.5W or

equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC.

104 Providing and fixing of 40W (1X4) LED Lighting

fixtures as per drawing (in office area & Porch

Area) (CGL Cat No. LCTLSN-40-CDL (1X4) 4.00 No 3417.00

40W or equivalent under Cat-II or above as per

R&B SOR) as per instruction of EIC.

105 Providing & fixing of 30W LED Street Light

Bulkhead (CGL Cat No. LSTO-30-CDL 30W or

equivalent under Cat-II or above as per R&B

SOR) on out side C/R building and inside cable

trench in C/R including wiring from ceiling rose

to fixture with suitable size of PVC insulated ISI

marked copper wire only as per Instruction of

106 Providing and fixing of heavy duty exhaust fan

in battery room size 18" of Make

GEC/KHAITAN/ CROMPTON/ BAJAJ incl. M.S.

louver shutter of Fan & necessary wall finishing

works and applying bird proof net on outside

wall with required arrangement for rain water

sealing and necessary conection from ceiling

rose as per Direction and instruction of EIC.

107 Providing & Fixing of Electric bell with bell switch

near officer's table. All materials must be ISI 1.00 No 149.00

mark and approved by EIC.

108 Providing and fixing of 18W LED Lighting

Fixture (CGL Cat No.. LCTL-18-CDL 18W or

equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC

109 Providing & Fixing of G.I. 1.5Mtr Long, 16MM

Dia Lightning Rod (Spike) for Lightning

Protection of Control Room Buiding as per

Instruction of EIC as shown in Drawing No..

GETCO/E/STD/DSLP-66kV CR- R0 Dtd.

110 Providing & fixing of 50x6 mm GI Flat for Control

Room DSLP Protection. The work is to be

carried out as per Drg. No.. GETCO/E/STD/

DLSP-66kV CR, R0 dated:26.10.17 as per inst.

of EIC. The rates are including fixing of clamps

on wall which is to be fabricated from 50X6 GI

Strip. (GI Strip will be supplied by GETCO Free

111 Supply,Installation,Testing and commissioning

of maintenance free treated earth electrodes

suitable for Rocky Soil as per drawing No.

GETCO/E/STD/P-021 (2 OF 2) R3 dated 29-05-

2020 and technical specifications

GETCO/E/TS-Maintenance free earth pits/R1

dated 04-06-15 for 66/11 kV substations with

ground enhancement material/ back fill /

grounding compound as per IEEE 80-2000

Clause 14.5 (d) and as per part-7 of IEC-62561

Using Copper bonded earth electrode (with

micron copper coating) having 24 mm dia (min)

and 3000 mm length which shall be capable of

handling STC of 25 KA-1 sec. Work also

includes Providing BB masonary inspection

chamber(manhole) incl. light type CI cover.

112 Providing & fixing of Wall Mounted Fan

Crompton / Orient/ PSPO / Usha / Cinni (must

be ISI approved). including wiring from ceiling

rose to Fan terminals of by using twin core 2.00 No 1597.00

flexible PVC to PVC 48 / 0.2 mm copper cord

of suitable & approved size & fixing of Fan

113 Providing & fixing of all weather proof, cold

rolled sheet steel AC Panel - 2 for Yard-Light

AC supply having

(1) 63A 4P MCB : 01 No.

(2) MCX-12A contactor : 01 No. 1.00 No 24732.00

(3) Digital Timer : 01 No.

(4) 20A TPN MCB : 06 Nos

(5) Indication lamp " 03 Nos

(6) Push Butten : 02 Nos

(7) Terminal Connector as per site requierment

and other detail as per drawing enclosed

including grouting & Necessary fabrication of GI

Angle or fixing on GI Structure, including

earthing with main grid as per instruction of EIC.

114 Providing & fixing of all weather proof, cold

rolled steel sheet floor mounted fixed type

single door grey color Main AC Dist box having

size 900x600x250 MM with door closing

arrangement and necessary rubber gasket.

Contractor has to supply following materials

with box along with necessary mounting and

(1) L&T/Anchor/Havells Make 100A,4P MCCB -

(2) L&T/Anchor/Havells Make 63A,4P MCB -

(3) 100 A Copper Bus-Bar Link - length 6 inch

size & 25 x 3 MM - 4 Nos.

(4) Tinned Earth Bus 25 x 3 MM Length -

(5) 25 & 16 sqmm Cu. flexible cable - 4 &

Meter respectively.

(6) Required Nos. of Cu. Lugs , etc. as per

instruction of EIC.

115 Supplying & laying of following size Control/ L.T.

power cable in readymade cable trench or by

excavating in any type of soil cable trench size

300mm wide 600mm depth and refilling the

same as per the direction of EIC. Item Includes

the cable laying upto termination box with

clamps & proper clamping of cable on gantries

by GI pipe & glands as per direction. Item

includes providing & supply of bircks, sand as

per requirement. The L.T power cable to be

provided by contractor as under :As per ISI

(Part-I). 3.5 Core x 50 mm2 Alluminium cable -

Armoured, from distribution X'mer to Main

Distribution Board near dist. X'mer and from

MDB to indoor LT panel board (LTPB) - both

116 Providing and fixing of ISI mark Rubber Matting

sheet Suitable for 11kV Class As per following

Reference IS:15652-2006 with latest

Suitable for Voltage Class :B SQM

Max Use Voltage : 11kV TR

AC proof voltage : 22kV

Dielectric strength : 45kV

Leakage current : < 10 micro ampere

Make : Vardhman or equivelent ( Rubberhouse

Thickness :2.5 mm.

Surface :Chequred on one side and other side

Contractor has to supply Rubber Matting sheet

as per IS:15652-2006 with latest amendment

specification and shall submit test certificate for

routine test as per relevant IS

117 Supply of 100W LED Flood light, Rating 100 W,

Operating voltage 120-280 V AC 50Hz , light

output 10000Lm, Body : Alluminium Die Cast,

Warrenty 2 Year, make (ISI approved).

118 Providing & Fixing of Aquaguard Total Reviva

Water R.O. Plant including Commissioning &

Testing and also with required peripherals for

installation of plant as per site condition

(1) Dimension: 320 X 275 X 410 mm

(2) Weight : 8 KG 1.00 No 6889.00

(3) Water flow : 8 to 12 LPH

(4) Input power : 230V AC

(5) RO membrence : TFC spiral

You have to provide guarantee for the 12 month

from the installation.

Total Electrical Work Estimate (PART-B)

Total Estimate Cost (Part A + Part B)

Welfare cess 1%

Total estimated cost

Scrap Recovery of dismantling items of Rs. 246197.00 (inclusive of all

taxes) will be deducted from 1st RA Bill of thw work

NOTE: (1) Please note that change in commercial terms & conditions in (i) Section-A ”Instruction to Bidders” , (ii) Section-C

(Conditions of Contract), Caluse No.3 (Compensation for the delay) and clause No.6 (Action on default by contractor) and

(iii) Section-D (General Condition of Contract), Clause-37 (Rights of Owner), Clause-38 (Relationship with employee) and

clause-39 (Conflict of Interest among Bidder/Agents)

Supt Engineer (TR),

GETCO: Circle Office, Jamnagar.

I/We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put by GETCO on WEB

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We am/are willing to carry

out the work at _________________% (in words ______________percentage) above/below the estimated cost. Accordingly

the total amount of my/our tender works out to Rs.____________________ (Rupees__________________

the total amount of my/our tender works out to Rs.____________________ (Rupees__________________

SIGNATURE OF CONTRACTOR.

(With rubber stamp/seal of the company)