Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.1 LAccepted-AOC | L1 | Accepted-AOC Competent committee approved the tender in favour of Ist Lowest Bidder | |
| 2 | L2₹18.6 L+₹52,725.25 (2.92%)Rejected-AOC | L2 | Rejected-AOC Competent committee rejected the file due to higher rates | |
| 3 | Not Admitted-Fee | - | Not Admitted-Fee Fee not received |
Tender Value
₹18.1 L
EMD Value
₹18,080
Closing Date
9 Nov 2023, 5:00 pmClosed
SUPERINTENDING ENGINEER
ELECTRICITY DISTRIBUTION CIRCLE, KATJU MARG, BAREILLY
For Earthing of DT, Guarding of 11 KV Lines, New Pole Erection in Long Span, Consturction of Overhead and underground 11 KV lines and DT Maintenace at Various Places under System Strengthening works in Municipal area scheme under EDD-I, Bareilly
2023_MVVNL_856785_1
53/EDCB/2023-24
Open Tender
Electrical Works
Item Rate
90 days
WORK
AS PER TENDER FORM
3 documents required · 3 mandatory
₹3,540
SE,EDC
₹18,080
2 May 2024
28 Oct 2023
10 Nov 2023
28 Oct 2023
9 Nov 2023
28 Oct 2023
Amount
The work of safe carriage of the following material from CB Ganj store center to work site under the jurisdiction of EDD-I Bareilly Approx. distance upto 60 Km. Including safe loading and unloading.
ST Pole 11 Mtr
PCC Pole 8.5 Mtr
ACSR Weasal Conductor
11 KV XLPE Cable size 3x120 sqmm
11 KV Outdoor Cable Jointing Kit
LT Cable 1x240 sqmm
LT Cable 1x400 sqmm
LT Cable 3.5x400 sqmm
LT Cable 3.5x240 sqmm
LT Cable 3.5x150 sqmm
Other Line material
Pipe Earthing of Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE)
Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms
ST Pole 11 Mtr long (Single)
PCC Pole 8.5 Mtr (Single)
PCC Pole 8.5 Mtr (Double)
Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms
ST Pole 11 Mtr long (Single)
PCC Pole 8.5 Mtr (Single)
PCC Pole 8.5 Mtr (Double)
Laying of LT Cable 1x240 sq mm complete in all respect
Laying of LT Cable 1x400 sq mm complete in all respect
LT Cable 3.5x400 sqmm
LT Cable 3.5x240 sqmm
Laying of LT Cable 3.5x150 sq mm complete in all respect
The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms
Laying, Stringing & Sagging of Following Conductor complete in all respect
ACSR Weasal Conductor
The work of digging of pits, erection of Stay Clamp, Insulator etc.
Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms.
Fixing of 3 Pahse Distribution Box complete in all respect
Under Ground Laying of 11 KV XLPE Cable in Double Circuit from Switchyard to VCB as per norms complete in all respect
Filling of Cable Jointing Kit complete in all respect
Guarding at road crossing complete in all respect
Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost)
GI Pipe Dia 6"
Stone Pad 300x300x75 mm
Distribution Box Clamp
Cross Arm Holding Clamp
F Clamp with Nut & Bolt
E Bracket
Danger Board With Clamp
Barbed Wire
Aluminium Lug 240 sqmm with Nut&Bolt
Aluminium Lug 400 sqmm with Nut&Bolt
Copper 'L' Piece 62x225x12 mm
Enamal Paint
Red Oxide Paint
P G Clamp
Holding Clamp for S/s
Holding Clamp for LT T-Off
Holding Clamp for G I Pipe
M S T-Off Channel
LT Clamp With Nut & Bolt
M S Angle 65x65x6x1200 mm
M S Angle 50x50x6x1700 mm
Stay Insulator
LT Shackle Insulator
Nut & Bolt for Shackle Insulator
Piercing Connector
Clamps with Nut & Bolts
Off Size Nut & Bolt
Gaurding Clamp
Eye Bolt
MS Nut & Bolt 65x16 mm
M/S HINA ELECTRICALS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .