C/O Community Bhawan Sarswati Mahila Mandal at upper Dari

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead and lifts Pick and Jumper Work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Foundation, footings basis of columns etc. and mass concrete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Columns, pillars, posts and struts Square, rectangular or polygonal in plan including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc.upto 200mm in thickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Stone filling under floor including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Edges of slabs and breaks in floors and walls Under 20 cm. wide including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete work 1: 1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) machenilcally mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundations,footings bases of columns and the like and mass concrete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete work 1: 1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) machenilcally mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced concrete work in in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete work 1: 1.5:3 (1 Cement:1.5 Sand:3 graded stone aggregate 20 mm nominal size) and curing complete machenilcally mixed and vibrated curing complete excluding cost of form work and reinforcement for reinforced concrete work in column, pillars posts and struts upto floor two levels including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level Tor Steel including carriage of material in all leads and lift and direction of Engineer-in-charge.

Random rubble masonry/polygonal rubble masonry (uncoursed/ brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

2nd class brick work using common burnt clay building bricks in super- structure Cement Mortar 1:6 (1 Cement : 6 Sand) above plinth level upto floor two level (Second Class Bricks) including carriage of material in all leads and lift and direction of Engineer-in-charge.

2nd class half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks Extra for half brick masonry in super-structure above plinth level upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing woodwork in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position. Sal wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd class deodar wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts (berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing oxidized M.S. hooks and eyes150 mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing M.S. grills with 10mm dia square bar of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including priming coat including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing 40x3mm flat iron M.S. hold fast 40 cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding incement concrete block 30x10x15 cm .1:3:6(1 cement:3 sand : 6 graded stone aggregate 20mm nominal size ) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing bright finished or/and black enamelled iron (Helical door spring 150mm) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing 60 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1Cement: 6 Sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:5 (1 cement: 5 sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coats (including priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With other then white enamel paint including carriage of material in all leads and lift and direction of Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping With white / other then white enamel paint including carriage of material in all leads and lift and direction of Engineer-in-charge.

Vinod Kumar