8506 ADDITION/ALTERATION TO BUILDING NO. P-103 AT NSTL(V) AND PROVISION OF WASH/BATH ROOM IN EXISTING TOILET FACILITY ON 1ST FLOOR OF SMC 7 MAKING PARTITION IN ROOM NO 292 and 293 OF NPMT NSTL VISAKHAPTANAM

Amount

Demolition of cement concrete ( re-inforced) in any description and in any position not otherwise specially provided for complete all as specified .

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc all as specified.

M & L Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster new surface all as specified.

M&L brick work with sub class 'B' modular size bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6

M & L RCC type B-1 , 1:2:4 (Nominal Mix) (20 mm graded aggregete) as in slab supported on walls ,roof beams complete all as specified

M & L RCC (Nominal Mix) type B1 1:2:4 (20 mm graded aggregete) as in lintel band complete all as specified

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia for securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 06 to 08mm dia over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia for securing with clips complete all as specified and directed.

-Ditto- but 5mm dia and over upto and incl 10mm dia in stirrups spacers and binders.

Form work to soffits of suspended slab such as roof slab, floor slabs landing and similar work; n.exc 200 mm thick

Form work to sides and soffits of floor or roof baems lintels etc rough finished surfaces of concrete, square rectangular or polygonal in shape

Formwork to edges of concrete flats, breaks in floor, openings in concrete walls, floors and roofs n.exc 20 cm width for rough finished surfaces.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surface and finished even and smooth in cement morter 1:4

M & L Rendering 15mm thick other than fair face of masonry in CM 1:6 complete all as specified and directed.

M & L Rendering 5mm thick on concrete sdurfaces as in ceiling in CM 1:3 complete all as specified and directed.

M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces

M&L 75mm thick cement concrete type D2 1:4:8 (40mm graded stone aggt) as in sub base

M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete. all as specified. Note. Shade of Granite should be incorporated the work to be match with existing .

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm 20.85

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 123.85

M &L applying Two coats Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour

M & L Finishing walls with two coats Acrylic Smooth exterior paint of required shade.1 first coat @ 1.67 ltr/ 10 sqm) and second coatd @ 0.90 ltr/10 sqm)

Providing and fixing stainless steel ( Grade 304) frame and door made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the frame with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Dismantling water tanks of capacity exc 250 ltr not exc 500 ltr and removing to store

Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store →

Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard/dense soil

M&L cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in filling and mass concrete as in sub floors complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil

Removing excavated material n exc 50m and depositing complete all as spd.

M&L Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

M&L for 12mm thick Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work etc. complete all as specified

M&L for 5mm thick sheet glass of ordinary quality provide with rubber gaskets exc 0.5Sqm complete all as specified

S&F for 4 lever brass mortize lock, vertical type , size 100mm complete

S&F Aluminum Die cast body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S&F MS butt hinge cold rolled medium weight 100mm size

S&F anodised aluminium barrel tower bolt 150mm long.

S&F 'D' type handle aluminium anodized 125mm in size.

S&F Aluminium Sliding Bolt of Size 200mm

S&F in repair tubular towel rail 600mm long of PTMT fixed with & incl CP brass screws & plastic cleats min wt 170gm

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq.m but not exc. 4.0 sq.m each all as directed

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of Synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed.

M&L for forming jambs, etc. to openings (to foregoing item) in cement mortar 1:4, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for non - skid coloured ceramic tiles 7 to 8mm thick, 300x300mm size, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:4) complete all as specified.

S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.

S&F 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm angle valve any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm Stop valve of PTMT with long shank and cup (concealed type) any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F PVC flexible waste pipe, 32mm bore, 900mm long suitable for wash hand basin/ sink complete with adapter.

Taking down carefully copper /aluminum point wiring complete, removing materials from site and making good disturbed surface of walls, floors etc all as directed.

Taking down old UNSV fuse Unit/ DBs 415 Volt/ 230 Volt of any type/ size complete all as directed.

Taking down old UNSV light fittings of any type complete all as directed.

Taking down old aluminium sub main wiring of any size upto 6 runs complete all as directed.

M & L for Point wiring complete with 1100 volt grade 1.5sqmm (nominal area) single core PVC insulated unsheathed FRLS cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC Conduit of suitable size but not less than 20mm width, with all fittings, surface in wall/roof/ floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting made of GI, poly carbonate material Base plate/Face plate/Screw cap/ Blank plates etc in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for following:-(a) One light/ fan/ Exhaust fan point controlled by one switch 6 Amps 1 way

All as per above item 61.00 but One 3 pin 5 Amp socket outlet on independent board

All as per item No 61 above but point wiring with 4 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let on independent board.

S & F Modular switch one way 6 Amp 230 V AC one module.

S & F Modular switch one way 16 Amp 230 V AC one module.

S & F Modular socket outlet 6 Amp 2/3 pin combined 230 V AC 2 module.

S & F Modular socket outlet 6A/16A - 2/3 pin combined 2 module.

S & F Modular fan step regulator 120W 2 module complete all as specified. .

S& F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

M & L for Sub main wiring with PVC insulated unsheathed FRLS cable 2 single core 6 sqmm 1100 V grade with multistranded copper conductor incl PVC Conduit fixed on Surface wall / roof/ceiling (ISI marked) incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor one runs 6 sqmm for earth continuity complete all as directed.

S&F Single pole & neutral distribution board double door CRCA sheet steel powder coated Distribution board concealed in wall SPN 8 way with 200 amp rated copper bus bar complete all as specified.

S & F MCB SP, 6-32 amps, 10 KA , 240 volts 'C' Curve all as specified and as directed.

S & F MCB SPN 40 to 63 AMP , 10 KA , 240 volts 'C' Curve all as specified and as directed.

Supply and fixing LED lights fitting 4 feet 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing of XLPE Insulated, Armoured Heavy Duty Electric Cable with aluminium conductor,1100 volts grade, cross sectional area 2 core 10 Sqmm on wall/ ceiling/trenches complete all as specified and directed

M & L for Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth including taking down old cable all as specified & directed in soft/loose soil complete all as specified and directed.

M&L for dry sand cushioning to under ground cable intrenches including spreading, levelling and hand punning complete all as specified.

Supply and laying un-reinforced precast concrete cable cover Class LV type I, size 250 x 150 x 40mm

M & L for Returning filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm in thick all as specified and directed.

M & L for Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified by the Engineer-in-charge.

S & F Stainless Steel Curtain Rod of 25 mm dia including Stainless Steel Brackets of size suitable to 25mm dia curtain rod as in Coat Hanger complete all as specified and as directed.

SHIKHARA PROJECTS

LAKSHMI SAI CONSTRUCTIONS

SRI RAJA RAJESWARI ENTERPRISES

G Srinivas Rao

SRI SRK ENGINEERS