Remodeling of NSS Room and Room of Law Advisor at 5th Floor, Vidyasagar Bhavan

Providing and fixing exterior quality Aluminum Composite Panel 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating ) (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet)with CP angles, cleats and stainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but excluding the cost of silicon sealant), labour, scaffolding and all other incidental charges e.g. VAT, Labour cess etc complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of (ACP)

Wood work by Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). 200per Cu M extra for each additional floor up to 4th floor

Supplying solid 25mm thick shutters (single leaf) flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber rame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings.

Supplying & laying of approved make and brand of scratch proof, flexible & homogeneous P.V.C. Vinyl flooring 2 mm thick conforming to IS:3462 - 1982 in required finish, fixed with synthetic acrylic adhesive after preparing the floor, leveling & smoothening when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge.

Rendering the Surface of walls and ceiling with 1.5 mm thick White Cement base WATER PROOF wall putty of approved make & brand.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Applying two coats of luxury quality Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty.

Painting two coats (with any shade except white) with best quality synthetic enamel paint of on steel or other metal surface approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.

Supply, fitting and fixing of “Polyester Vertical blinds with slat width 100 mm and slat thickness 0.80 mm” including Head rail - end caps - carrier trucks with link - mono command with wand - face fix brackets - shallow frame face fix brackets - top fix brackets screw - top fix brackets spring - top fix brackets clip and screw - adjustable face fix brackets - extension top fix brackets - side fix brackets - Louvre insert – Cord – Metal chain, Plastic chain, Cord weights etc. and all other allied fittings and fixtures.