SPECIAL REPAIR TO BUILDING NO. P-13 AND P-16 NAVAL BASE AND P-14 AND P-15 NAVAL PARK AT INS DWARKA OKHA UNDER GE NAVY PORBANDAR

Amount

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation, etc. and getting out in soft / disintegrated rock complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil, complete all as specified.

Removing excavated rocks to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete articles and precast concrete block walling etc. Complete all as specified and directed.

Stone masonry walling or squared walling in cm 1:4, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Mild steel CRS bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel CRS bars 8mm dia as in stirrups spacer and binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

RCC M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed .

RCC M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) as in Columns, Pillars, Piers, Posts and Struts complete all as specified and directed.

Use and waste of Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs and similar work n exc 200 mm thick (horizontal or sloping) complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup, ports, overhangs, etc. also splays between floors and beams complete all as specified.

Use and waste of Form work to sides and soffits of chajjas and like and similar work n exc 200 mm thick (horizontal or sloping) complete all as specified and directed.

Use and waste of Form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as specified and directed .

PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete or as in sub base complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry bedded in any mortar complete all as specified.

Vitrified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 15 mm thick in cement mortar 1:6 Complete all as specified and directed.

Vitrified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10 mm thick in cement mortar 1:4 Complete all as specified and directed.

Glazed ceramic tiles, coloured (light colour as approved) of size 350x250x7mm / 450x350x7mm thick on vertical surfaces such as in skirting / dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed.

Coloured non skid ceramic tiles 7 to 8 mm thick (squre / rectangular) area of each tile not exceeding 0.11 sqm as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layering cement mortar (1:6) complete all as specified.

15 to 20mm thick Granite (of any colour) machine cut and polished, single piece, one side is rounded bull nosing with two nos friction grove in tread of stair case laid over cement screed 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

15 to 20mm thick granite (of any colour) machine cut and polished, single piece in riser of stair case laid over cement screed 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

Hard core of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 150 mm thick, watered and rammed to a true surface, before concreting or otherwise complete all as specified and directed.

20 to 25 mm thick Kota stone slab as in flooring laid over and including 15mm thick screed bed in cement mortar (1:6), set & jointed in grey cement slurry mixed with pigment to match shade of slab, including rubbing grinding and mirror polishing, complete all as specified and directed.

18 to 22 mm thick kota stone slab as in skirting, riser of steps and pillars over and including 15mm thick rendering in cement mortar (1:4) including rubbing grinding and mirror polishing,complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and as directed.

75mm thick PCC 1:3:6 , type C-1 using 20mm graded stone aggregate as in plinth protection finished even & smooth without using extra cement making 10mm wide joints at every 3m interval and at every corner, filled with mixture of bitumen and sand (1:1) complete all as specified.

60 mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block factory made any shape and size confirming to IS 15658-2006 of complete (with grey cement and pigment) over and including 50 mm thick sand cushioning complete all as specified and directed.

Dismantling AC sheets corrugated & semi corrugated fixed in roof covering including AC ridges complete all as specified.

High tensile galvalume sheets colour coated single skin high rib / multi rib TMP Profile Galvalume sheeting in roof having 1000-1020 mm width 28 mm high crest @ maximum 250 mm pitch (centre to centre) and minimum 190mm manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

High tensile galvalume sheets colour coated single skin plain Galvalume sheeting in ridge and cladding having 1000-1020 mm width manufactured out of 0.50 mm TCT (total coated thickness) cold rolled steel, having yield strength 550MPa minimum and wall coated with 25 micron modified polyester paint system applied on Zincalume on top and with back coating on sheet shall be 7-10 micron epoxy paint. The sheet shall be supplied in length maximum upto 6-12 meters long to suit with structural dimensions and fixed with self tapping screws with built in gasket (with bitumen washer) of suitable size machine fixed as per manufacturer instructions and applying adhesive compound to joint overlap of sheets complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc, Complete all as specified and directed.

Rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:6 finished even and smooth without using extra cement complete all as specified.

Supply only liquid water proofing compound.

Rendering 10 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified.

Checken wire mesh for old and new masonary joint and masonary to RCC member joint fixed with nails complete all as specified and directed.

Rendering 5 mm thick on fair faces of brick work or concrete surfaces as on ceiling surface, facia and projection of slabs, and window projection, in CM 1:3 finished even and smooth without using extra cement complete all as specified.

Preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2mm thick wall care putty complete all specified and directed.

Complete removal of existing treatment preparation of surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty complete all as specified and directed.

Preparation of newly plastered surfaces of walls, soffits & facias of beam, chajjas etc applying two coats of weather proof Acrylic based exterior emulsion paint over a coat of primer complete all as specified.

Preparation of newly plastered surfaces and applying three coats of white wash as in wall complete all specified and directed.

Preparation of newly plastered surfaces and applying three coats of white wash as in ceiling complete all specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp insulation etc) or insulation boards/ slabs / blankets any thickness including cover fillets complete all as specified and directed

Gypsum Board 12mm thick 60 x 60 cm ceiling board fixed with screw with and including 25mm X 25mm, Main tee 38mmX23mm ,Sub tee 23mmX23mm aluminium anodised snap grid frame 605X605 mm for false ceiling including hanging arrangement complete all as specified and directed by Engineer in Charge.

Taking down chowkats or frames (aluminium) exc 1.5 sqm and n.exc 4 sqm each with shutter (without taking off Shutter) complete all as specified and as directed.

Taking down aluminium window/ventilator including glass and grill complete all as specified and as directed.

Mild steel work conforming to Fe-290 Gde E-165 as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, (Posts and Struts in fencing including embedding in concrete etc) drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps, gates wind tie including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work fixed in repairs complete all as specified and as directed by Engineer in Charge.

Cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cill, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and similar work including use & waste of necessary form work complete all as specified and directed.

2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Factory made 35mm thick, 2nd class hard wood , plain framed, panelled shutters, (two panel) with lock rail and, panels shall be of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

35mm thick 2nd class hardwood glazed & skeleton shutters, open rebated & prepared to receive glass, gauze etc. (without sash bars), edges of farming plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters shall be all as specified in clause 8.20 (a), section 8 of SSR 1991, Part I complete all as specified.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter, 30mm thick (style consisting of frame made out of MS frame covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip 20 mm wide stuck inside with solvent cement for style and plain colour PVC sheets for top lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per manufacturer's instruction and as specified in SSR Part-II-2010.

Factory made 25mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood leaping on three sides and 25mm thick on hanging sides & french polishing to edging fixed in repair / replacement complete all as specified and as directed.

Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300mm long with fixing clips of sheet, cast or extruded sections fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified.

2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each all as specified and directed by Engineer- in - charge.

300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

100mm Butt hinges medium weight, cold rolled, stainless steel, and fixed complete all as specified and directed.

75mm Butt hinges medium weight, cold rolled, stainless steel, and fixed complete all as specified and directed.

200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

150mm extruded aluminium alloy handles, cast type, anodised complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all specified and directed.

Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Aluminium powder coated grill (Grill No. 20) of make 'DECO GRILL' or equivalent approved make including making opening for handle & fittings, fixed with and including aluminium (anodised) channel section 38mm x 12mm x 1.30mm complete all as specified and directed.

5.5mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.

4mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.

4mm thick figured glass, plain ordinary quality n.exc 0.5sqm in each pane fixed to aluminium sections with neoprene gasket complete all as specified and as directed.

Stainless steel wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

18-19mm thick pre laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter , shelves etc including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging, fixed in repair, complete all as specified and as directed.

Hydraulically aluminium extruded section body door closer regulated designation No. 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg etc complete all as specified and directed.

Mortice lock 2 levers verticle type size 100mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described for any description excluding form work complete all as specified and as directed.

MS framed work such as grills, gratings, etc with ends of bars shoulders or riveted or forged in to spikes, framed guard bars , rungs ,screen and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.

Rolled mild steel Framed work (rolled mild steel Fe - 410-W (Gde-E-250) quality "A") as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Mild steel framed work conforming to Fe-290, Gde-E-165 such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Mild steel rolled or hollow sections such as in main and cross beams, hip and Jack rafters, purlins, where connected to common rafters and running rails etc fixed with angle cleats or flat iron clamps or other connecting arrangements complete Fe 410 -W (Gde E- 250) quality A, complete all as specified and as directed.

Preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of Synthetic Enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old painted steel surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic Enamel paint complete all as specified and as directed.

Taking up or down existing steel water tubing 15mm to 25mm bore alongwith connections fixed / laid in any position complete all as specified and as directed.

15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or floors complete all as specified and as directed.

20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or floors complete all as specified and as directed.

25mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or floors complete all as specified and as directed.

Dismantling U/s CI pipe / PVC alongwith fitting of any dia below or above ground level and taking out complete all as specified and directed.

110mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2, single socketed in any length with rubber ring laid in floors fixed to wall / ceiling with clamps complete all as specified and directed.

75mm bore PVC (SWR) pipes of pressure rating 6 kgf / cm2, single socketed in any length with rubber ring laid in floors fixed to wall / ceiling with clamps complete all as specified and directed.

110mm bore PVC (SWR) bends any radius with with oval access door fixed with rubber ring joints jointing with adhensive complete all as specified and directed.

110mm bore PVC (SWR) 110 mm dia junction single T equal or un equal with oval access door fixed with rubber ring joints jointing with adhensive complete all as specified and directed.

75mm bore PVC (SWR) bends any radius with with oval access door fixed with rubber ring joints jointing with adhensive complete all as specified and directed.

75mm bore PVC (SWR) 110 mm dia junction single T equal or un equal with oval access door fixed with rubber ring joints jointing with adhensive complete all as specified and directed.

75mm PVC (SWR) floor trap, plain including jointing with solvent cement and white cement complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

110mm bore PVC (SWR) vent cowl complete all as specified and directed.

75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Grating square 150mm size of PTMT openable type (minimum weight 100gms) fixed in repairs complete all as specified and directed.

32mm bore PVC flexible waste pipe with plastic check nuts for WHB & sinks fixed in repairs complete all as specified and directed.

PVC connection 600mm long, 15mm size with PTMT nuts complete all as specified and directed.

32mm bore waste coupling of PTMT studs (half of full threas) (Min weight 45 gms each) complete all as specified and directed.

Kitchen sink with drainage board made of stainless steel 1mm thick (SS grade 304AISI 18/8) IS embossed (IS:13983) glossy finish with plugs, washers and wastes; including bedding in cement mortar to platform or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,over and including bedding layer 20mm thick 1:6, Complete all as specified and directed.

Bib tap, brass 15mm bore, long Nose (Long Body) with capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Angular stop valve brass 15mm bore, Capstan head chromium plated, with wall flange, fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repairs complete all as specified and directed.

Brass Chromium plated shower rose 125mm dia with swivel joints, including shower arm 15mm dia, 195mm long with 45 degree bend and flenge of CP brass complete all as specified and directed.

Fency type brass CP 15mm wall mixer with 'L' bend for CPVC pipe complete all as specified and directed.

Health faucet fency type with 1mtr long flexible tube and wall hook fixed in repair / replacement complete all as specified and directed.

Bib tap two way chromium plated fancy type with crutch or butterfly handle screwed down for iron pipe 15mm bore of pipe complete all as specified and directed.

Pillar tap brass 15mm bore, with capstan head chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

EWC seat cover closed pattern of flat bottom and cover including MS / anodised hinged device complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed.

Vitreous china (White) half stall urinal with grating, union for discharge pipe, spreader, incl 40mm dia PVC heavy duty waste pipe upto floor trap, fixing with brackets, flush pipe, union for discharge pipe, connection pipe , Incl fixing in Urinal spreader and restoring connection, complete all as specified and as directed by Engineer in Charge

Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete, fixed in repairs, complete all as specified and directed.

Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including waste pipe, brass coupling, 32 mm bore chromium plated brackets, restoring all connections, fixed in repairs,complete all as specified.

CP Soap dish of size 160 x 160 x 90mm or over fixed to plugs with chromium plated brass screws, fixed in repairs, complete all as specified and as directed

Brass Chromium plated towel rail, 600mm long, min 20mm dia pf superior quality, fancy type fixed in repair complete all as specified.

Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified.

Dismantling of water tank RCC / HDPE / Ferrocrete of size exc 500 ltrs n.exc 1000 ltrs capacity complete all as specified.

Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 1000 Litre capacity, hoisted and fixed in position, with lid, tounge nipple for inlet, outlet connections etc. fixed in repairs, complete all as directed by Engr-in-Charge.

25mm bore ball brass valve, high pressure with epoxy coated aluminium rod and high density polythene float ball and fly nut screwed for iron pipe complete all as specified and directed

Gun mental globe or gate valves, with iron wheel head screwed both ends of iron pipes for 25 mm bore pipe fixed Complete all as specified and directed.

Pre-cast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab of manholes, septic tanks, etc. and set in cement mortar 1:4 including dismantling of damaged RCC covers slab complete all as specified and as directed. NOTE : Reinforcement will be measured and paid for separately under relevant Item(s).

20mm dia stainless steel tubular curtain rod with fancy type bracket fixed with screw in wall complete all as specified and directed.

Plain cement concrete 1:3:6 type C2 (using 40mm graded aggregate bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested complete all as specified and as directed.

Reinforced concrete pipes class NP2 150mm laid and jointed with collars in cement mortar 1:1 complete all as specified and directed.

Cutting into existing sewage line manholes for connecting new drains of any dia of pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 150mm dia.complete all as specified.

Non skid Ceramic coloured Joint free tiles of size 600mm x 600mm x 10mm thick (area of each tile exceeding 0.18 but not exc 0.38 sqm each) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15mm thick screed or bedding layer in cement mortar (1:6), the complete all as specified and as directed.

Non skid Ceramic coloured tiles of 7 to 8mm thick (area of each tile exceeding 0.06 Sqm but n.exc. 0.11 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layering cement mortar (1:6) complete all as specified.

Kitchen sink with drainage board made of stainless steel 1mm thick (SS grade 304AISI 18/8) IS embossed (IS:13983) glossy finish with plugs, washers and wastes; including bedding in cement mortar to platform or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified.

Waste coupling of PTMT (half or full threaded minimum weight 45 grams dia of discharge pipe 32mm fixed in repair complete all as specified.

Pillar tap brass 15mm bore, with capstan head chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

CP Soap dish of size 160 x 160 x 90mm or over fixed to plugs with chromium plated brass screws, fixed in repairs, complete all as specified and as directed

PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and directed.

Stop valve brass 15mm bore, with capstan head chromium plated fencing type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Bib tap chromium plated fancy type with crutch or butterfly handle screwed down for iron pipe 25mm bore of pipe complete all as specified and directed.

Brass chromium plated shower roase 125mm dia with swivel joints including shower arm 15mm dia 195mm long with 45 degree bend and flange of CP brass fixed in repairs complete all as specified and directed.

Stop valve brass 15mm bore, concealed type with capstan head chromium plated fencing type screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe fixed in repairs complete all as specified and directed.

Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 190 gms) complete all as specified.

Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 500 Litre capacity, hoisted and fixed in position, with lid, tounge nipple for inlet, outlet connections etc. fixed in repairs, complete all as directed by Engr-in-Charge.

25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or lying in floors complete all as specified and directed.

20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or lying in floors complete all as specified and directed.

PP-R gate valves (brass insert) 25mm bore complete all as specified and directed.

Jet spray (PTMT) with flexible pipe for water closet (English type), chromium plated, suitable for pipe of 15mm bore fixed in repair / replacement complete all as specified and directed.

Taking down PVC chowkats or frames not exc. 1.5 sqm each complete all as specified and directed.

Floor door stopper aluminium alloy body double tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

300mm long MS ordinary rat rail rod pattern spring including roller and roller plate complete conforming to IS fixed in repairs complete all as specified and directed.

Aluminium alloy wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium channel beading fixed in repairs complete all as specified.

Taking down shutters only exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified.

PCC 1:2:4 type B0 using (12.5 mm graded crushed stone aggregate) as in foundations, filling and mass concrete or as in sub base complete all as specified and directed.

Screed bed or beeding layer or mortar (CM 1:4) 15mm layer of mortar for laying roof floor finishes complete all as specified and directed. (Note : Water proofing compound will be measured and paid separately)

Water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment / specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 3 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less 150 gms per sqm. Polymeric membrane shall be taken to a height of 60 cm 9 minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying of APP based membrane shall be done by torch on method and as per manufacturer's instructions. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and all overlaps and joints are properly sealed as per manufacturer's instructions. (iii) Applying two coats of Bituminous aluminium paint on top of APP membrane cover including testing on completion complete all as specified and directed.

Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt grade 2 complete all as specified and directed.

preparation of new or previously untreated membrance / Bitumen felt surfaces of any description not otherwise described and applying one coat of Aluminium paint 0.15 litre / spm complete all as specified and directed.

Rendering 10 mm thick in CM 1:6 backing coat and 5mm thick in CM 1:4 mixed with water proofing compound as finished coat on stone wall surface to be finished even and smooth without using extra cement on fair faces of stone wall complete all as specified and as directed. (Note : Water proofing compound will be measured and paid separately)

Complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and irected.

Preparation of old painted steel surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic Enamel paint complete all as specified and as directed.

INTERNAL ELECTRIFICATION

Taking down carefully copper/aluminium point wiring (light/fan, buzzer, socket or power point etc) complete including all fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for the following:- One light/ fan point

One 5 Amps 3/5 pin socket outlet on same board with other switches.

One 3 pin socket outlet 5 Amps independent board complete all as specified and as directed.

One bell / buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm size complete all as specified and directed.

Point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for Description a for independent switch socket outlet 6 pin 5/15 Amps and all as directed at site.

Point wiring with 4 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for Description a for one AC point 20 Amps independent all as directed at site. Note : Seprate circuit of individual point will be drawn from the DB directly for AC point complete all as specified and as directed.

Sub main wiring concealed with 4 Sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable 1100 V grade, drawn into and including rigid non-metallic PVC concealed conduit 20mm dia or higher, class 'B' complete with all PVC conduit accessories including 2.5 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to common earth point all as Specified and directed by Engr-in-Charge.

Sub main wiring concealed with 6 Sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable 1100 V grade, drawn into and including rigid non-metallic PVC concealed conduit 20mm dia or higher, class 'B' complete with all PVC conduit accessories including 4 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to common earth point all as Specified and directed by Engr-in-Charge.

Ceiling rose surface Bakelite, 65x50mm, 3 terminals , complete all as specified and as directed.

Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings with 10 watt LED lamp fixed in repairs complete all as specified & directed.

SPN sheet metal enclosures with plug and socket with top and MCB SP 20 Amps fixed in repairs complete all as specified and directed.

SKYLUX LED recess mounting 18 Watt false ceiling luminarie glare free uniform illumination extruded metal / aluminium body electronic LED driver connector block with all accessories internal prewired & connecting with 2 core flexible copper conductor cable of suitable size complete all specified and directed. Make : Bajaj Cat part No. 111910 / BZRSQL 18w WH or equivalent model of make specified in Appx 'B'.

Taking down of ceiling fan / exhaust fans including applying of two coat of duco paint of any approved shade after cleaning and refixing to its original location or other location after spray painting using super enamelled paint from ceiling rose to fan, rubber reel nut bolts and split pin complete all as specified & directed.

Exhaust Fan 1000 RPM motor speed 300 mm blade sweep plastic body complete all as specified and as directed. Make : Bajaj cat No. Maxima Dx 300 mm or equivalent model of make specified in Appx 'B'.

Surface and wall mounted 10W LED natural white Engineering plastic battern with white acraylic cover duly prewired and connecting fixed in repairs complete all as specified and directed. Make : Bajaj cat No. 112408/BCLSP 10 NW or equivalent model of make specified in Appx 'B'.

Batten LED luminaire, 20W integral, sleek extruded polycarbonate LED channel, with inbuilt electronic driver / control gear, bi-pin holders, connector blocks, etc. with all connected accessories internally pre-wired, including 20W LED bulb connecting lead of 3 core 1.5sqmm flexible copper wire 1.5sqmm from ceiling rose to fitting fixed in repair / replacement complete all as specified and directed. Make: Bajaj Cat Part No. BCLSB 20WH or equivalent cat part of make specified in Appx 'B'.

Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable GI pipe (light grade) bracket made of 40 mm bore pipe bent to shape fixed with clamps, nut bolts are fixed on wall / post in repair / replacement complete all as specified and directed. Make : Havells cat no ENDURAPEARLSL20WLED757SASYTOPC or equivalent cat part of make specified in Appx 'B'.

Modular white cover plate with frame 1 module fixed in repairs complete all as specified and directed.

Modular white cover plate with frame 3 modules fixed in repairs complete all as specified and directed.

Modular white cover plate with frame 6 modules fixed in repairs complete all as specified and directed.

Modular white cover plate with frame 8 modules fixed in repairs complete all as specified and directed.

Modular white cover plate with frame 12 modules fixed in repairs complete all as specified and directed.

Modular switch 1 way 6 Amps, 1 modules 230 volts fixed in repairs complete all as specified and directed.

Modular switch 1 way 16 Amps, 1 modules 230 volts fixed in repairs complete all as specified and directed.

Modular socket 6A, 2/3 pin combined, 2 modules 230 volts fixed in repairs complete all as specified and directed.

Modular socket 16A, 2/3 pin combined, 2 modules 230 volts fixed in repairs complete all as specified and directed.

Bell push 6 Amps, 1 module 230 volts fixed in repairs complete all as specified and directed.

Cell bell Multi musical type fixed in repairs complete all as specified and directed.

Five step fan modular regulator 2 module 230 volts fixed in repairs complete all as specified and directed Make : Havells cat No. AHLRFHW005 or equivalet model of make specified in Appx 'B'.

MCB DB Single pole and neutral 12 way double door IP-43,230V having earthing terminal, with 200Amps rated bus bar including making electrical incoming and outgoing connection with lugs/thimbles complete all as specified and as directed.

MCB DB Single pole and neutral 8 way double door IP-43,230V having earthing terminal, with 200Amps rated bus bar including making electrical incoming and outgoing connection with lugs/thimbles complete all as specified and as directed.

MCB DB Single pole and neutral 4 way double door IP-43,230V having earthing terminal, with 200Amps rated bus bar including making electrical incoming and outgoing connection with lugs/thimbles complete all as specified and as directed.

TPN and vertical loadline 4 way double door suitable for G frame MCCB DBs are fitted with Bus Bars, Neutral Links, Blanking Plates with incomiing MCCB 100 Amp - 01 N, (4 Pole, 35 KA breaking capacity Fixed Thermal & Fixed Magnetic setting Ics = 50% of Icu) and Outgoing MCB Tpn 63 Amp -3 Nos connected with duly wire fitting on wall and smooth finishing after fixed in repair / replacement complete all as specified and as directed. Make :- Havells Cat No :- DHDLVDRWGOFO04 or equivalent model of make specified in Appx 'B'.

TPN and vertical loadline 4 way double door suitable for G frame MCCB DBs are fitted with Bus Bars, Neutral Links, Blanking Plates, IP-43,230V having earthing terminal,concealed in wall including making electrical incoming and outgoing connection with lugs/thimbles fixed in repair / replacement complete all as specified and as directed. Make :- Havells Cat No :- DHDLVDRWGOFO04 or equivalent model of make specified in Appx 'B'.

MCB SP 6-32 Amps,10 KA breaking capacity 'C' Curve suitable 230 V,50 Hz for lighting and other domestic load fixed in repairs complete all as specified and directed.

MCB SPN 32 Amps,10 KA breaking capacity 'C' Curve suitable 230 V,50 Hz for lighting and other domestic load fixed in repairs complete all as specified and directed.

MCB SPN 40 Amps,10 KA breaking capacity 'C' Curve suitable 230 V,50 Hz for lighting and other domestic load fixed in repairs complete all as specified and directed.

MCB TPN 63 Amps,10 KA breaking capacity 'C' Curve suitable 230 V,50 Hz for lighting and other domestic load fixed in repairs complete all as specified and directed.

Surface/concelled Mounting Plastic boxes 1/2 Modules fixed in repairs complete all as specified and as directed. Make:- Havells Cat No :- AHNXMIZX01 or equivalent model of make specified in Appx 'B'.

Surface/wall Mounting Plastic boxes 3 Modules complete all as specified and as directed. Make:- Havells Cat No :- AHNXMIZX03 or equivalent model of make specified in Appx 'B'.

Surface/wall Mounting Plastic boxes 6 Modules complete all as specified and as directed. Make:- Havells Cat No :- AHNXMIZX06 or equivalent model of make specified in Appx 'B'.

Surface/wall Mounting Plastic boxes 8 Modules complete all as specified and as directed. Make:- Havells Cat No :- AHNXMIZX08 or equivalent model of make specified in Appx 'B'.

Surface/wall Mounting Plastic boxes 12 Modules complete all as specified and as directed. Make:- Havells Cat No :- AHNXMIZX12 or equivalent model of make specified in Appx 'B'.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI earth strip 32x6 mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

INTERNAL ELECTRIFICATION

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in deep and getting out soft/loose soil for taking out / laying of UG cable. LT of any size complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified.

Removing excavated material n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point, complete all as specified and directed.

Sand cushioning with a layer of sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed.

Precast concrete cable cover unreinforced, ISI marked class LV types 2 flat size 250mm x 150mm x 40mm having minimum average breaking load 200Kg, complying IS:5820-1970 made of concrete used of grade M-20, laid flat in trenches over the cable with the length of concrete cover perpendicular to the direction of the cable length, adjacent / abutting each other complete all as specified.

GI tubing light grade 40 mm bore for cable protection, laid under plinths / floors / roads / culverts or fixed on walls or along the steel poles by means of M.S.F.I clamps with necessary bolts nuts washers etc complete all as specified.

XLPE insulated armoured (under ground) heavy duty electric cable with standard aluminum conductor 1100 Volts grade of cross sectional area 50 sqmm 3.5 core laid in trenches/ducts/through pipes /in floor road/along the pole etc complete all as specified.

XLPE insulated armoured (under ground) heavy duty electric cable with standard aluminum conductor 1100 Volts grade of cross sectional area 16 sqmm 4 core laid in trenches/ducts/through pipes /in floor road/along the pole etc complete all as specified.

SHREE CHAMUNDA ENTERPRISE

JAMNAGAR ELECTRIC AND MACHINERY CO