const. veterinary hospital bhawan

Amount

civil work

Earth work in excavation by mechanical means(Hydraulic Excavator )/ manual meansin foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan)including dressing of sides and ramming of bottoms,lift upto 1.5 m, including gettingout the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated eaKh (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 2Ocm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lih upto 1.5 m.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) . Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 19a concentration

P/L C.C. in found. ,plinth and bases of columns etc. 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nomina1 size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 cement- 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo- Mechanically Treated bars of grade Fe-500D

Foundations, footings, bases of columns, etc for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Suspended floors, roofs, landings, balconies and access platform

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1-6.12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks cf class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement: 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement: 6 coarse

Providing and fixing IVR.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood: 35 mm thick shutters

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Oxidised mild steel tower bolt(barrel type) 50x10 mm

Brass hanging type door stopper 150 mm

Providing and fixing lst quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,over 12 mm thick bed of cement mortar 1:3 (1 cement: 3coarse sand)

Prouiding and laying Ceramic glazed floor tiles of size 30Ox300 mm (thickness to be specified by the manufacturer) of 1st quality laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand),

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and fixing lst quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Lintels, beams, plinth beams, girgers, bressumers and cantilevers

15mm cement plaster on rough side of single or half brick wall of mis 1:6 (a cement :6fine sand)

distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats)

finishing walls with acrylic smooth exterior paint of required shade new work (two or more caot applied @ 1.67 ltr/10sqm over

finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufactures specification : painting wood work with deluxe multi surface paint of required shade tor or more coat applied @0.90 ltr/10sqm over an under coat of primer applied @ 0.75 ltr/10sqm of approved brand

grading roof for water proofing treatment with cement mortar 1:3 (1 cement : 3 coarse sand)

12 mm cement plaster of mix 1:6 (1 cement 6 fine sand)

SOBAT SINGH RAWAT

Virendra Singh