Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC ERATTUPETTA BLOCK PANCHAYATH KERALA | IDUKKI | KERALA | 685501 | L1 | Accepted-AOC LOWEST AMOUNT QUOTED BY ANISH KUMAR K S | |
| 2 | L2₹6.6 L+₹76,926.82 (13.3%)Rejected-AOC | L2 | Rejected-AOC LOWEST AMOUNT QUOTED BY ANISH KUMAR K S | |
| 3 | L3₹6.8 L+₹97,260.67 (16.8%)Rejected-AOC | L3 | Rejected-AOC LOWEST AMOUNT QUOTED BY ANISH KUMAR K S |
| Sl No | Description | Qty | Unit | Anish Kumar K.S. L1 | JJ ASSOCIATES L2 | DON BRIDGE L3 |
|---|---|---|---|---|---|---|
| 1.00Ceiling Maintenance | ||||||
| 1.00 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 296.42 | sqm | 871.57 ₹2,58,350.78 Lowest | 1,000 ₹2,96,420 | 1,017.6 ₹3,01,636.99 |
| 1.00 | OD404343/2025-2026:Providing and fixing Anodised Aluminium sections work ( minimum thickness of
Anodising 25 microns ) consisting of tee /angle sections, of approved make
conforming to IS : 733 in frames of false ceiling including aluminium angle cleats
with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles
fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the
frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated
machine screws all complete as per approved architectural drawings and direction of
the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold
fasteners to be paid for separately ). | 185.93 | kg | 585.43 ₹1,08,847.83 Lowest | 672.51 ₹1,25,038.44 | 683.51 ₹1,27,083.65 |
| 2.00Sheet roofing | ||||||
| 2.00 | OD403840/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 73.75 | sqm | 533.44 ₹39,341.2 Lowest | 622.45 ₹45,905.69 | 622.81 ₹45,932.24 |
| 2.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 7.5 | metre | 806.44 ₹6,048.3 Lowest | 900 ₹6,750 | 941.55 ₹7,061.63 |
| 2.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 87.11 | kg | 160.21 ₹13,956.69 Lowest | 187.05 ₹16,294.86 | 187.05 ₹16,294.86 |
| 3.00EV workshop flooring | ||||||
| 3.00 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 40.96 | sqm | 1,521.56 ₹62,323.1 | 1,500 ₹61,440 Lowest | 1,776.49 ₹72,765.03 |
| 4.00Doors and windows | ||||||
Tender Value
₹6.8 L
EMD Value
₹16,944
Closing Date
2 Mar 2026, 6:00 pmClosed
ASSI.EXECUTIVE ENGINEER
ASSI.EXECUTIVE ENGINEER LID EW DIVISION IDUKKI GP PAINAVU
Annual Plan IDP 2025 26 ARAKULAM GP ARAKULAM GHSS MAINTENANCE 197 26 General Civil Work
2026_LSGD_838206_21
15/T/AEE/LID EW/IDK/2025-2026
Open Tender
Civil Works - Others
Item Rate
120 days
ARAKULAM GP
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,495
Yes
₹16,944
Yes
2 Jul 2026
21 Feb 2026
4 Mar 2026
21 Feb 2026
2 Mar 2026
21 Feb 2026
21 Feb 2026 - 2 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Ceiling Maintenance | |||||
| 1.001 | 50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | - | sqm | - | - |
| 1.002 | OD404343/2025-2026:Providing and fixing Anodised Aluminium sections work ( minimum thickness of
Anodising 25 microns ) consisting of tee /angle sections, of approved make
conforming to IS : 733 in frames of false ceiling including aluminium angle cleats
with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles
fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the
frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated
machine screws all complete as per approved architectural drawings and direction of
the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold
fasteners to be paid for separately ). | 0.2 | kg | - | - |
| 2Sheet roofing | |||||
| 2.001 | OD403840/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 2.002 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | - | metre | - | - |
| 2.003 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 3EV workshop flooring | |||||
| 3.001 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | - | sqm | - | - |
| 4Doors and windows | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1412606.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 6.59 MB
BOQ_1412606.xls
BOQ • 0.31 MB
NIT.pdf
Tender Documents • 0.03 MB
BID.pdf
Additional Documents • 1.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .