11 /EE/PMD/PHED OF 2024-2025/Sl7

Amount

Supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS : 8034 ( and as amended there after ) with standard MOC for potable clear cold water and capable of discharging noted 19 M³/hr against head of 28 mtr water column. The pump shall be directly couprled with a continuous rated 2- pole suitable wet type vertical squirel cage induction motor conforming to IS : 9283 (and as amended thereafter),suitable for operation in AC Three phases 415 V,50HZ (category B motor). Test certificate along with characteristic curve should be submitted at the time of delivery. Make: Approve make of PHED.

Supply and delivery of 3 Core 4 sq.mm water proof Flat Submersible Cable. (Make: PHED Approved make)

Supply, delivery at site and storage of 3 Core 10 sq.mm Al. Ar. XLPE Cable for Incomer (Make: Gloster/Havells/Polycab/Approved) for 5 Nos. Submersible Pump.

Supply and delivery of 1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

Supply and delivery of 80mm dia. CI Top & Bottom adopter.

Supply and delivey of 32 mm dia. Medium class GI pipe threaded conforming to IS:1239(Part-1) 2004. for cable protection.

Supply and delivey of 32 mm dia. GI elbo threaded

Supply and delivey of 32 mm dia. GI Union threaded

Supply and delivey of 32 mm dia. GI Socket threaded

Supply and delivey of 32 mm dia. GI Nipple threaded

Supply and delivery of 150 mm x 40 mm MS clamp made of 5 mm thick and 24 mm width strip with nuts & bolts for holding 32 mm dia pipe as per direction and as per requirement.

Laying of 10 sq mm cable by cutting sand at riverbed and laying through GI pipe with MS clap & refitting as per direction of EIC.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Laying of three cables upto 35 sqmm in an underground trench in single tier formation (horizontal) the trench size : 915 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between the cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed.

Installation of Submersible Pumping machinery to newly sunk tubewell along with column pipe (as requried), top cover, Valves, and Specials of above with protection pipe,and supply of MS clamp,nut bolt, cable gland, sockets etc. making interconnection of the pump delivery line to pump collecting main line (if required) near tubewell with supply of all necessary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC.

Supply and delivery at site of LED illuminated sign board design and manufacturing structure with 60x35x1.3 mm (Jindal) one side glaging Al tube with frame on aludecor exterior AL-33 ACP (Al composite panel) Aluminium Coil 0.25 mm silicon pasted on 12 mm imported acrylic (UB brand LED letter fitting for ACP letter inside 1.5 W original samsung ( 3 years guarantee) fitting LED module connect for 12 V 300 W power supply (2 years guarantee) board back side cover exterior ACP board LED boarder fitting all internal board fitting and fixing including all types of electrical connection complete name of board as per direction of EIC.

Fitting fixing the above signage board on wall including supplying all necessary jointing materials, mendint damages and necessary power connection with supply of required electrical accessories including all complete as per direction of EIC

Supply and fabrication of board with G.I Sheet & G.I angle as per following:- angle of 30mm X 5mm X 4Mtr. Length and G.I Sheet thickness 3mm(1Mtr. X 1Mtr. )

Writing the details of Name,Mobile Numbers of Pump operator and vlavle operator etc on self adhesive vinyle sheet in Bengali language as per direction of EIC, Colour and style of writing approved by EIC. (1Mtr. X 1Mtr. Sheet)

Fixing the above supplied Board on wall with supplying all materials, labour, excavation, erection, welding complete the work in every pump hosue as per direction of EIC.

Carring charges of the new Board with all fitting materials from the manufacturer to the Every Pump House loading unloading updown complete.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : upto 50 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3½ core 50 sqmm cable

Supply and delivery of Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method only. Dia: 150 mm, PN-1.0

Supply, delivery at site and storage of safety equipment like 3 kgs. fire extinguishers IS 7285: 1 nos, fire buckets IS 2546: 2 nos, rubber mats IS 15652, shock treatment chart (Bangali) and first aid box as per satisfaction of EIC.

Supply and delivery at store of spear part of gaseous chlorination system. (Make: Approved make of PHED) Lead washer (G-100)

Lead washer (G-111)

Flexible coil connecting copper tube

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. For Exposed Work PVC Pipes 15 mm

Supply and delivery of Plastic Funnel

Supply and delivery of Industrial light Innovatively designed recess-mounting bottom-opening LED canopy light, IP65 high-grade aluminium housing with frame, and elegantly designed extruded aluminium heat sink for efficent thermal management, sturdiness, excellent corrosion resistance, dust-free and zero maintenance luminaire suitable for petrol pump lighting. Orient LICP-080-C-V1/Similar, 80W

Painting of the installation (viz. pumps, valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer and direction of EIC.

Installation of Sl. No. 28 & 33 with supply all necy nut, bolt with drawing of power cable from DB to light through casing capping wiring with 1.5 sq.mm copper wire (where necy) and complete the job as per direction of EIC.

Detection of fault, dismantelling of the burnt out Contactor from Stabilizer through cleaning and removing all damage materials from inside of the Stabilizer after disconnecting electrical lines with the engage of skilled electrician as per direction of EIC.

Supply and delivery of 3 Pole, 95 Amp. power contactor with 2 NO + 2 NC. Make: L&T/Approved make of PHED]

Fitting fixing of Contactor with necessary gauge of cu.wire, power termional etc. socketing all the leads properly for proper fitting by engaging skilled electrician including testing commissioning complete as per direction of EIC.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5 Kg./m (for making ladder as per drawing & direction of EIC.)

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. For roof truss works (a) Span up to 12 Mtr

M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white)

Add GST @ 18%

Add CESS @ 1%

COMBINE ENTERPRISES (BID ID -5769775)

SUBRATA DUTTA (BID ID -5769825)