Construction of New Prathmik Pashu Sarvar Kendra At Village Dev Ta. Balasinor Dist. Mahisagar (Second Attempt)

Name of Work :- Construction of New Prathmik Pashu Sarvar Kendra At Village

Dev Ta. Balasinor Dist. Mahisagar

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Civil works items

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 323.74 Cum 255.85

of useful materials and disposing the excavated stuff for all lead and lift for all

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting out 189.68 Cum 264.23

and stacking of useful materials and disposing the excavated stuff with all lead

and lift for all sorts of soil.

3 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 87.45 Cum 4352.09

4 graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, base or columns and mass concrete.

4 Providing and laying controlled cement concrete M-250 and finishing smooth 63.76 Cum 4841.90

with curing etc complete, including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in Foundations, footings base of columns &

5 Providing and laying controlled cement concrete M-250 and curing complete 9.34 Cum 7967.89

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts & struts upto floor two level

6 Providing and laying controlled cement concrete M-250 and finishing smooth 23.36 Cum 6053.94

with curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C. work in Plinth beams.

7 Filling available excavated earth (excluding rock) in trenches plinth side of 1553.90 Cum 136.92

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

8 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm 73.22 Cum 295.15

thickness including watering, ramming and consolidating etc. complete.

9 Filling in plinth with sand under floors including watering, ramming, 13.67 Cum 479.80

consolidating and dressing complete.

10 Anti-Termite System:Providing and laying of permanentpiping technology anti- 199.26 Sq.m. 134.33

termite treatment before flooringwork by installing LLDP (Low linear density

polyethylene)tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt

pressurecompensation chip every 30 cm interval in the tube,having working

pressure of 2 Kg/cm2 and release rate of1.9 Itr/hour fixed by P-clips and nails.

The LLDP pipeshall be installed at the entire periphery of the buildingand at

internal network of building at a depth of 20 to200 mm under floor at every 2 to

3 mtr. c/c distance(adjusted as per building layout ) & Ends of loop passthrough

a PVC elbow of minimum 32 mm ID at junctionbox of wall and floor level,

entering into a steelreinforced grooved flexible pipe of minimum 22 mm

IDleading into junction box and the loops shall terminate injunction boxes & test

every junction during injectingchemicals for termite control treatment. The anti

termitechemical Imidacloprid 30.5% SC mix as per IS-6313(part III) shall be

injected by the pressure pump dilutedwith water @ 10.5 ml/5 ltr of water at the

rate of 2Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submitapproved line plan

for piping system and junction boxesdully approved by Engineer-in-Charge with

bond of 5year warranty.(i)Anti Termite chemical injected area(Chemical

injecting incl. labour cost)

11 Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1- 31.70 Sq.m. 321.97

cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size) and curing

12 Providing and laying brick work using common burnt clay building conventional 29.76 Cum 4214.33

type bricks having crushing strength not less than 35 Kg./Sq.cm. in super

structure above plinth level and up to floor two level in cement mortar 1:6 (1

cement : 6 fine sand) including the cost of all materials and labour charges etc.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

13 Providing and laying brick work using common burnt clay building conventional 76.21 Cum 4496.05

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand) for

Ground Floor including the cost of all materials and labour charges etc.

14 Providing and laying brick work using common burnt clay building conventional 7.28 Cum 4538.16

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand) for

First Floor including the cost of all materials and labour charges etc. complete.

15 Half brick masonary in Common Burnt Clay building bricks having crushing 43.09 Sq.m. 684.26

strength not less than 35 kg/sq.cm in super structure above plinth level upto

floor two level in cement mortar 1:4 GF ( 1 cement : 4 fine sand) (B)

16 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6 6.27 Cum 4147.33

crushed stone aggregates 20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping

17 Providing and laying controlled cement concrete M-200 and curing etc. 2.65 Cum 7476.02

complete including the cost of form work but excluding the cost of reinforcement

in (C) Slabs landings shelves balconies, lintel -chhaja, beams, girders and

cantilever up floor to level. (Lintel)

18 Providing and laying controlled cement concrete M-200 and curing etc. 0.05 Cum 7517.60

complete including the cost of form work but excluding the cost of reinforcement

in (C) Slabs landings shelves balconies, lintel-chhaja, beams, girders and

cantilever up floor to level. (Lintel)

19 Providing and laying controlled cement concrete M-200 and curing etc. 1.10 Cum 6907.39

complete including the cost of form work but excluding the cost of reinforcement

in (C) Slabs landings shelves balconies, lintel-chhaja, beams, girders and

cantilever up floor to level (Chajja).

20 Providing and laying controlled cement concrete work of M 200 and curing 2.10 Cum 8594.09

complete including cost of formwork and Excluding reinforcement for reinforced

concrete work in (E)Staircases excluding landing upto floor two level . For

staircase in below give fair finish surface.

21 Providing and laying controlled c.c. M.200 & curing complete including the cost 14.40 Cum 7934.56

of form work but Excluding the cost of reinforcement for reinforced concrete

work in Collumns, pillars, posts & struts upto floor two level for G.F.

22 Providing and laying controlled c.c. M.200 & curing complete including the cost 4.92 Cum 7976.10

of form work but Excluding the cost of reinforcement for reinforced concrete

work in Collumns, pillars, posts & struts upto floor two level for G.F.

23 Providing and laying controlled cement concrete M-200 & curing complete 27.50 Cum 6560.96

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor two level for G.F.

24 Providing and laying controlled cement concrete M-200 & curing complete 1.98 Cum 6602.50

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor two level for F.F.

25 Providing and laying controlled cement concrete M-200 & curing complete 29.89 Cum 4877.29

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

G.F. slab for Grade slab.

26 Providing and laying controlled cement concrete M-200 & curing complete 30.79 Cum 6658.93

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

27 Providing and laying controlled cement concrete M-200 & curing complete 2.88 Cum 6700.47

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

28 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 23108.30 Kg. 77.29

including bending, binding and placing in position complete upto all floor level.

29 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 1917.80 Kg. 78.34

including bending, binding and placing in position complete upto floor two level.

Extra for additional lift of reinforcing steel for all R.C.C. work above floor two

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

30 Providing and fixing M.S. Fan clamps type 1 to 16mm dia M.S. bar bent to 14.00 No. 136.75

shape with hooked ends to R.C.C. slabs curing, laying including painting the

exposed portion of loops, all as per standard design complete

31 Providing & fixing 40 mm thick Single shutter flush door solid core finished 18.00 Sq.m. 7089.19

with both side 1 mm thick lamination both side like 'NOVAPAN 'or equivalent,

of natural wood grain shade as approved by this office having telephone black

granite 18 mm thick frame with double stone as per the instruction of Engineer

in charge.with necessary SS hinges and fixtures etc . complete.

32 Providing & fixing 35 mm thick Single shutter flush door solid core finished with 4.73 Sq.m. 6723.57

both side 1 mm thick laminationboth side like 'NOVAPAN 'or equivalent, of

natural wood grain shade as approved by this office having telephone

blackgranite 18 mm thick frame with double stone including fixed ventilation

above lintle level as per drg and as per theinstruction of Engineer in charge.with

necessary SS hinges and fixtures etc . complete.

33 Providing and fixing window having extruded aluminum colour anodized section 33.62 Sq.m. 4260.18

frame main outer size 95mm x 24mm x 1.17mm (@ Wt. 0.738 Kg/mt),

horizontal three track member size 92mm x 31.75mm x 1.30mm (@ Wt.

Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (@ Wt.

of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (@ Wt. of

0.456 kg / mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing including granite frame as per details etc. complete.

34 Providing and fixing louvered type ventilators with powder coated aluminum 2.70 Sq.m. 13733.98

fittings and fixtures and Blur glass fixing to adjustable louvers and black granite

frame as per details and executed as per directed by Engineer in charge.

35 Providing and fixing M.S. hollow section box grills of required pattern to frames 165.47 Kg. 222.20

of windows or opening etc. with M.S. section of 2.5" x 2.5" square of Tata of

jindal section having finish with G.I. coated finish by zinc oxide and oil paint

including all labour and material as per directed by engineer incharge.

36 Providing and fixing M.S. grills of required pattern to 682.39 Kg. 130.29

wooden/Marble/Granite/Stone frames of windows etc. with M.S. flats at

required spacings and frame alround, square or round bars with round headed

bolts and nuts or by screws (A) Ornamentle Grill.

37 Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring treads 165.42 Sq.m. 1531.82

of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand ) finishing with flush pointing in white cement. Light Shade

38 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 7.27 Sq.m. 1467.72

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

39 Providing and laying Marbo Granite tiles 8 to 10 mm thick, 24'' x 24'' in skirting, 92.77 Sq.m. 1195.02

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

40 Providing and laying polished Kota stone slab flooring over 20mm (average) 22.88 Sq.m. 1019.39

thick base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

41 Providing and laying 18 mm thick machine cut, free edges, machine polished 34.78 Sq.m. 3325.93

Black Granite tread and risers in single piece with 1 cm nosing and necessary

grooves on treads etc. complete.

42 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 198.97 Sq.m. 779.70

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along

the wall, clearing with water and oxalic acid etc. as directed.

43 Providing and laying BBCC of 75mm thick layer in CM (1:3) including spraying 206.09 Sq.m. 626.20

two coat of water proofing chemical with selected brand by enginner in charge

i.e. perma or other with leveling complete for ready base of china mosaic

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

44 Providing and cement vata (10cm x 10cm size) quarter round in cement mortar 104.35 Rmt. 24.28

1:1 including neat cement finishing watering etc. complete.

45 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of 582.11 Sq.m. 175.39

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) including

Galvanised Iron Chicken Mesh, Complete.

46 Providing 15mm thick cement plaster in single coat on brick/concrete walls for 199.43 Sq.m. 201.44

interior plastering upto floor two level and finished even and smooth in cement

mortar 1:4 (1-cement : 4 sand) for ceiling.

47 Providing 20mm thick sand faced cement plaster on walls upto height 10 604.18 Sq.m. 373.48

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

48 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 22.45 Rmt. 43.05

49 Applying two coats of putty & two coats of primer of approved brand and 521.80 Sq.m. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

50 Applying two coats of putty & two coats of primer of approved brand and 199.43 Sq.m. 42.77

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth. (Ceiling Putty)

51 Wall painting two coats with plastic emulsion paint of approved brand and 521.80 Sq.m. 82.85

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth.

52 Finishing wall with weather proof exterior emulsion paint on wall surface (two 523.68 Sq.m. 120.26

coats) to give an required shape even shade after thoroughly brushing surface

to remove all dirt, dust and remains of loose powdered materials etc. complete.

53 Wall painting two coats with plastic emulsion paint of approved brand and 199.43 Sq.m. 85.03

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth on ceiling.

54 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 31.00 Rmt. 148.12

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

55 Providing, laying and jointing in true line and level I.S.I. mark 32mm dia. 54.60 Rmt. 119.15

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

56 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 15.00 Rmt. 72.65

U.P.V.C pipe (Sch-40) for cold water including fitting as approved by Engineer

in charge. Pipe shall be fixed on the wall with held of clamp at every two meter

c/c or shall be concealed as directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with adhesive solvent including

cost of all materials.

57 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 13.50 Rmt. 660.58

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (F) 50 mm dia.

58 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 15.00 Rmt. 253.82

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (B) 25 mm dia.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

59 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 63.00 Rmt. 876.90

U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain

and other end socketed with rubbering & fitting confirming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110mm diameter x 149mm length x 145mm high at every 2000mm center

to center or shall be concealed in wall as directed including necessary fitting

such as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

60 Providing and fixing screw down bib taps of following size (A) Brass chromium 14.00 No. 186.83

plated screw down bib tap (i) 15mm dia. as approved by Engineer in charge for

61 Providing and fixing screw down bib taps of following size (A) Brass screw down 6.00 No. 214.81

bib tap polished bright (ii) 20mm dia. as approved by Engineer in charge for all

62 Providing and fixing pillar tap, capstan head screw down high pressure with 6.00 No. 354.69

screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.

63 Providing and fixing chromium plated brass half turn flush cock of approved 6.00 No. 263.77

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as directed by

Engineer in charge.

64 Providing and fixing Gun metal check or non return full way wheel valve. 40 mm 3.00 No. 663.43

65 Providing and fixing Gun metal check or non return full way wheel valve. (C) 25 3.00 No. 420.63

66 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 1.00 No. 2326.66

including cutting holes in walls and making good the same but excluding fittings.

(C) Vitreous China Sink (i) 600mm x 450mm x 150mm size.

67 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. 3.00 No. 1451.48

brackets painted white including cutting holes and making good the same but

excluding fittings. (A) Vitreous china (ii) Flat Back washbasin 550 mm x 400mm

size. (i) In white colour.

68 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets 4.00 No. 616.42

fixed to wooden plugs with C.P. brass screws.(B) 600 mm x 20 mm size.

69 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 2.00 No. 282.16

100mm dia. each

70 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass 3.00 No. 859.41

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plug

with C.P. brass screws and washers.

71 Providing and laying wash down water closet ( european type WallHung Square 3.00 No. 10271.70

WC pan ) Florentine series FLS-WHT 0111B including providing and fixing

metropole Flush cock seat cover, jet wash etc complete unit of jaquar Branch (

or equvalant ) including installing and fitting as per manufacturers standards by

skilled trained plumber including testing etc complete quality and brand as

approved by Engineer in charge.

72 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 37.00 Rmt. 834.38

U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other

end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

160mm diameter x 210mm length x 196mm high at every 2000mm center to

center or shall be concealed in wall as directed including necessary fitting such

as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

73 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jail of the 8.00 No. 586.27

following nominal diameter of self cleansing design with C.I. screwed down of

hinged grating including the cost of cutting and making good the walls. (i)

74 Providing and fixing S.W.gully trap with C.I. grating brick masonary chamber 4.00 No. 1292.19

and water tight C.I. cover with frame of 300mm x 300 mm size (inside) with

standard weight (i) square mouth traps (A) 100 mm x 100 mm size P type.

75 Providing and laying (two level or slopes) and jointing with stiff mixture of 15.00 Rmt. 317.46

cement mortar in proportion 1:1 salt glazed stone ware pipes following nominal

internal diametre including testing of pipes and joints etc. complete. 150 mm

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

76 Constructing brick masonary chamber for under ground C.I. Inspection chamber 6.00 No. 2932.93

and bends with bricks having crushing strength not less than 35 Kg/cm2 in C.M.

1:5 C.I. cover with frame (light duty) 455 mm x 610 mm. internal dimensions,

total weight of cover with frame to be not less than 38 Kgs. weight of cover

Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm. size) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls & a bed concrete etc. complete. (i) inside

dimension 455mm x 610 mm and 450mm deep for single pipe line.

77 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse 1.00 No. 11042.74

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement : 2-Coarse sand :4-stone aggregate 20mm nominal size) finished

smooth complete including curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement : 5 Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter

78 Providing erecting and fixing double coated Syntex or equivalent PVC (I.S.I.) 3000.00 Litre 3.95

mark water tank of required capacity each with all necessary fittings &

connection etc. comp on terrace.

79 Providing and fixing ball cock of approved quality as directed. (A) Copper metal 2.00 No. 132.89

80 Providing and fixing 90 cm high Stainless steel railing made from anticorrosive 3.20 Rmt. 3162.31

S.S. pipe of 50 mm dia (16 Gauge) as hand rail with S.S. 38 mm dia. (16

Gauge) as a vertical support fixed in RCC slab at 1.2m c/c including three

horizontal S.S. pipes of 25 mm dia. (16 gauge) at equal distance fixed by

mm dia (16 gauge) S.S. pipe including accessories as per detailed drawing as

directed etc. complete.

81 Painting lines, deashes, arrows, letters etc on roads, Air fields,on walls and 14.40 Sq.m. 129.29

like in two coats with road marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (i) Upto 10cm in width

82 Providing and laying sandwich type kitchen platform of size 2.10 x0.76 x 0.76 m 1.81 Sq.m. 17171.01

and respected length with dhar polish or moulding having base 4" and spport &

base with marble or Kota as per site requirement also loft and base finish with

glaze tile and top with selected shed of marble or granite with gas pipe

provision and sink including all fittings ,material and labour as per directed by

engineer incharge.

83 Clearing and grubbing road land including uprooting rank vegetation grass 0.18 Hect. 84256.00

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (A) By manual means

in area of light jungle.

84 Providing & fixing Co2 type portable ABC Dry Powder type ABS Fire 15.00 No. 3500.00

extinguisher capacity 4.5 Kg. discharge range 3mt. timing 60 to 180 sec.

standard approved IS code No. 2878:2004.

85 Providing and fixing M.S. grill entrance gate of predetermine design including all 11.34 Sq.m. 4341.59

material like hinges, roller, stopper, rail head, handle etc having coat of red lead

and painting with selected colour guide by engineer incharge.

86 Providing and fixing pre-cast Rubber Dye I steel Dye inter locking concrete 85.00 Sq.m. 706.77

block 60mm thick with grade of concrete M300 pnumatic compressed I vibrated

mechanically and as per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc, Complete.

87 Providing and fixing precast Rubber dye / steel dye inter locking concrete block 210.00 Sq.m. 706.80

60mm thick with grade of concrete M-300 pneumatic compressed / vibrated

mechanically and as per approved design confirming to IS 15658 :

including 35 mm sand layer for levelling and filling the joint with sand in proper

line and level as per guidelines of IRC : SP 63-2018 etc. complete.

88 Drilling of 215mm dia. bore in over burden strata (0-30) including lowering and 75.00 Mtr 343.00

fixing of 175 mm nominal dia UPVC pipe/175 mm dia ERW pipe upto required

depth and further drilling of 165mm dia bore hole in rocky strata by DTH rig.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

89 Providing & supplying 175mm nominal dia. UPVC “CS” type pipe as per 30.00 Mtr 906.00

IS:12818 and as per detailed technical specification.

90 Electric motor driven borewell submersible pump set conforming to I.S. 8034 1.00 Set 18756.00

and motor conforms to IS-9283 working at 3 phase 400/440 volt 50 C/S A.C.

supply & 2900 R.P.M. discharge 240 LPM and 72 mtr Head, 7.5 hp Cat.

91 SITC of D.O.L starter up to 7.5 H.P. 1.00 Set 8383.00

92 Providing & supplying Flat PVC cable size 4.0 sq.mm as per IS 694 with BIS 60.00 Mtr 87.00

mark and as per detailed technical specification.

93 Heavy duty, 50 mm dia. G.I. Column pipe both end threaded having length 60.00 Mtr 537.00

approximate 3 mtr. confirming to IS 1239 (Part-1) with coupling at one end.

94 Providing, supplying and fitting ISI mark CI D/F Sluice Valves as per IS:14846 1.00 No. 2316.00

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. PN-1 With hand

wheel /cap operated (PD type short body) 50 mm

95 Providing, supplying & fitting ISI mark CI D/F Reflux Valves as per IS:5312 1.00 No. 3307.00

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. Reflux valves PN

1.0 IS 5312 with ISI mark 50 mm

96 Lowering of Submersible motor pump set complete with required nos and size 1.00 Job 2500.00

of Column pipe erected by means of proper chain pulley block & pipe wrenches

after checking of threads of each pipe with coupling to take the load of the

pumpset and pipe assembly filled up with water with trail testing..

97 Clamps made from MS plate with 3 holes on either side with nuts & bolts of 1.00 No. 560.70

standard make and suitable size 450 mm x 65 mm x 10 mm flat suitable to

98 Supply of TOP & BOTTOM accessories of 50 mm dia. 1.00 No. 1475.00

99 R&B Approved make ELCBs / RCCBs conforming to IS:12640 and having 1.00 No. 2611.00

sensitivity of 30 mA and Short Circuit with stand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V. having characteristic of quick action

& tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed. 40 Amp. Cat.III

100 Electrical wiring & fitting charges of electric meter, 40Amp fuse, control panel 1.00 Job 2500.00

etc. including erection of the above items on wooden board, cost of material

and all liasioning work for getting electric connection from concerned Vij

101 Pumping test of the tubewell by sub mersible pump of adequate capacity for 1.00 Job 17250.00

165 mm DTH bore.

102 Providing and fitting readymade prefabricated portable chemicalized ferro 1.00 Job 12187.50

concrete mini panel having outer size 110 x 50 x 190 cm with necessary fitting

for electic panel mounting complete as per detailed specification and drawing.

103 Three Phase GEB power charges. 1.00 Job 14000.00

104 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out 15.40 Cum 182.90

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead (B) Dense or Hard soil.

105 Providing and laying controlled cement concrete M-150 for curing complete 3.10 Cum 4022.70

excluding cost of formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, base of columns and mass concrete.

106 Double half brick thick honey comb brick work with common burnt clay building 69.04 Sq.m. 323.00

bricks having crushing strength not less than 35 Kg/Sq.cm. (i) In cement mortar

1:4 (1 cement : 4 coarse sand)

107 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 2.00 No. 958.17

less than 35 Kg.

108 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 49.00 Rmt. 257.20

non-pressure pipes I.S. class NP-2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (B)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

109 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 No. 7180.44

and bends with bricks having crushing strength not less than 35 Kg/Cm2 in

C.M. 1:5 C.I. cover with frame (light duty) 455mm x 610mm internal dimensions

total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc. complete. (iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe lines with three or more inlets.

110 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 30.00 Rmt. 359.80

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (C)

111 Filling in foundation and plinth with brick bats, chhara in layers of 20cm. 6.20 Cum 621.50

thickness including watering, ramming and consolidating etc. complete.

112 Providing and fixing PVC SWR Nahni trap IS-14735 for drain - 75 mm diameter 10.00 No. 574.60

with jali of the following nominal diameter of self cleansing design with C.I

screwed down or hinged grating including the cost of cutting and making good

113 Providing, fixing and erecting steel shed including M.S. G.I. pipe (class-B), 57.28 Sq.m. 2020.00

framing of structure with hollow section and painting with two coats of oil paint

including priming coat. Rates including with necessary fabrication work

including cutting, welding, making holes by drilling machine & fixing in line and

level of all structure including cost of all laboures, fixtures, fastening and

equipments etc. complete.

114 Office Table :- 18mm thick three layer pre laminated particle board Work with 4.00 No. 23000.00

PVC edge band 2mm thick wrapped around the top, decorative aluminium

bidding in top and modesty including all necessary elements with necessary

features and fastning finish all as per directed by Engineer in charge. 6 FT

Office Table (Dimension :- 180 cm x 90cm x 75 cm) with suitable brand.

115 Revolving Chair :- Full-Back Executive Office Chair upholstered in bonded 4.00 No. 14750.00

leather and PVC, Padded seat and back for all-day comfort and support,

Pneumatic seat-height adjustment; 360-degree swivel; smooth-rolling casters

and having overall dimension 73.9D x 66.5W x 115.6H centimeters with

Armrest (Brown) with selected brand.

116 File Rack :- lack adjustable 5-Shelf Shelving Unit Storage Rack Utility Rack 8.00 No. 7700.00

Garage Shelves Display Rack Steel Boltless Rivet Rack, 60 inches Height 1-

Pack ({5 - SECTION } 5'[H] x 2'[L] x 1'[D]) with suitable brand.

117 Visiting Bench :- Chair Three Seater Waiting Area Chair Reception Chair 325- 2.00 No. 10700.00

350 Kg Weight Handling Capacity. Durable Parts and support, Our Chairs have

whole welded connections.

Product dimensions: Length (70 inches), Width (23 inches), Height (31 inches)

Color : Shining Silver, Material : Mild Steel (Iron), Finish: Chrome Finish, Style:

118 Steel Stool :- Office Stainless Steel Stool having minimum overall dimension 10.00 No. 1800.00

35.6D x 35.6W x 76.2H Centimeters, made with S.S. leg and rubber pad /

bushing with suitable brand which will select by engineer in charge.

119 Chair :- S.S. Chair for Office having seat and back with selected cushion, 5.00 No. 2600.00

Fabric, Pattern, PU with arm rest and minimum overall dimension 78.7D x

41.9W x 78.7H Centimeters with suitable brand which will select by engineer in

120 Stainless Steel Office Almirah : Supply and installing Portable Modern double 7.00 No. 15000.00

Door steel almariah with nearer 30 kg wt having dimension 36 x 18 x 78.5 inch

made from SS, Eco friendly and UV resistant in grey color having minimum

partition for file rack and other department as per selected and directed by

Engineer incharge.

121 Providing, supplying and fixing the AC of 1.5 tonne of standard company i.e. 3.00 No. 45000.00

Blue star, Panasonic or equivalent as per manufacturer specification and select

by Engineer incharge

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Electrical Items

122 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 34.00 Point 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected

on PVC / Metallic / Wooden box, single mounting base frame covered with

textured / metallic / white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D. Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat. III

123 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 12.00 Point 674.68

are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic / Wooden box,

single mounting base frame covered with textured / metallic / white front plate

modules erected on / in wall / ceiling as per pipe erected with necessary ceiling

rose / H.D. Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. Cat. III

124 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & 7.00 Point 167.66

earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light with

accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

125 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 4.00 Each 510.05

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic / Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

126 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 18.00 Each 257.55

socket erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on / in wall /

ceiling with following type accessories. Cat. III

127 Providing following type of Modular Type Accessories mounted with PVC / 3.00 Each 160.59

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone

Socket [A] For One Gang Cat. III

a (7) Blank Plate Single Cat. III 15.00 Each 25.25

b (8) Computer RJ-45 socket Cat. III 7.00 Each 160.59

c (9) 16 Amp. SP one way switch Cat. III 7.00 Each 180.79

d (10) 6/16Amp. Universal socket Cat. III 7.00 Each 199.98

128 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 120.00 Mtr 24.24

a size complete

(c) 32 mm to be erected on/in wall or ceiling erected with necessary PVC 60.00 Mtr 54.54

129 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 248.00 Mtr 82.82

marked stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following

size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

130 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 75.00 Mtr 112.11

marked stranded Copper conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

a (h) 4 wire 6 sq. mm 25.00 Mtr 147.46

131 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 9.00 Mtr 46.46

grade ISI marked copper wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

132 Supplying & erecting approved make LAN cable of following size in existing 105.00 Mtr. 47.47

pipe as per direction [C] CAT -

133 Supplying & erecting approved make Telephone Cable electrolytic copper 45.00 Mtr. 20.20

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring

& confirming to C-DOT erected in existing pipe. of following size of conductors

& nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

134 Providing & erecting main Distribution (MDF) indoor type, back mounted frame 1.00 Each 994.85

as per DoT standard approved with krone strips (a) Suitable for 10 pair

135 Providing & erecting Switch board for Computer or electric apparatus 4.00 Each 1133.22

consisting of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

136 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Each 71.71

137 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 14.00 Each 373.70

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat. III

138 Supplying and erecting led lamps with following wattage capacity of 220 to 240 9.00 Each 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat. III

139 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 14.00 Each 427.23

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat. III

140 Supplying and erecting LED street light / Flood light fittings with High power 6.00 Each 3345.12

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (i) above 36 to 48 watts Cat-lll

b (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and 2.00 Each 3475.41

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block.IP 65 (i)20-

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

141 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 0.30 Rn. 1961.43

Copper Busbars with four equal Nos. of electrolyte bus having current density Mtr.

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

142 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system 8.00 Each 270.68

and having breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark Cat III

143 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 20.00 Each 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat III

144 Providing & erecting 240 V MCB double pole switch for motor & inductive load 6.00 Each 330.27

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity(B) 40 Amp. Cat III

145 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) 1.00 Each 578.73

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat III

146 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 1.00 Each 668.62

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b)40 Amp. Cat III

b (c)63 Amp. Cat III 1.00 Each 737.30

147 Providing and erecting Sheet Steel powder coated MCB distribution board - 2.00 Each 1492.75

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

148 providing and erecting Approved make RCCBs conforming to IS: 12640 and 2.00 Each 1969.50

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (i)

Amps.DP Cat III

149 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 1.00 Each 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

150 Providing & erecting weather proof, dust & vermin proof, floor mounted front 0.60 Sq. 11466.53

operated outdoor type double door cubical panel board necessary IP-54 and Mtr.

above protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses

etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size.(A)

locally fabricated panel board (i) with 350 mm depth

151 Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 120.00 Mtr. 53.53

KV.grade to be erected as directed of following size. (B) 2 core 4 Sq. mm

152 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 11.00 Mtr. 153.52

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A) 4 core 16 Sq. mm

153 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 16.00 Each 33.33

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.(A) 2 to 4 core 2.5 / 4 Sq. mm

b (D) 2 to 4 core 16 Sq. mm 2.00 Each 16.16

154 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 32.00 Each 6.06

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/

155 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 23.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

156 Providing & laying approved make Double walled corrugated pipes (DWC) of 27.00 Mtr. 62.62

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer dia

157 Providing and erecting Approved make Ceiling fan with double ball bearing ISI 10.00 Each 1596.81

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

158 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 10.00 Mtr. 108.07

down rod erected duly painted for fan complete with proper insulation without

leakage and earthing.

159 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 12.00 Each 108.07

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

160 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 12.00 Each 18.18

161 Supplying & erecting approved make low noise decorative exhaust fan having 3.00 Each 1366.53

square frame ABS body with inbuilt lowers & square frame.250mm with

162 Supplying & erecting approved make SMC press moulded composite FRP. 1.00 Each 898.90

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of following size of

box.(A) 300mm x 200mm x 100mm [deep]

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

b (C)150mm x 125mm x 100mm [deep] 8.00 Each 476.72

163 Supplying and erecting B class Galvanized iron pipe having smooth finished 6.00 Mtr. 215.13

bore of the pipe on both ends erected nuts and bolts along the pole / wall

shaping the pipe as per site requirement. Pipe dia as following.(B) 32 mm dia

164 Supplying & erecting approved make Digital time switch having lithium cell 6 1.00 Each 3168.37

years operative and operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in

fire proof thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

165 Supplying & erecting power contactor ,AC3 duty for time switch complete 1.00 Each 796.89

erected as per direction Cat III(A) 2 Pole 250V 12 Amp.

166 Supplying and erecting approved make suitable panel indicator LED type lamp, 3.00 Each 43.43

lens cover, complete erected with necessary connections.

i.e. Rs. Eighty one lakhs thirty thousand Seven hundred Thirty one Rupees and nine paisa only.

Deputy Executive

Deputy Executive

DivisionEngineer

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a

change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Halol Godhra Godhra