Kerala

Active

Works

Civil Works - Others

Annual Plan-WOMEN FITNESS CENTRE - INFRA STRUCTURE WORK WARD 10-Project No.201/2026 - 27 of Kizhakkoth GP-General Civil Work

Local Self Government Department

BUILDING | Kozhikode, Kerala

Amount: ₹1.3 LCloses: 14 Oct 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes14 Oct 2026
Bid Opening16 Oct 2026

Tender Value

₹1.3 L

EMD Value

₹3,178

Closing Date

14 Oct 2026, 6:00 pm3d left

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

LID AND EW SECTION KIZHAKKOTH

Work Description

Annual Plan-WOMEN FITNESS CENTRE - INFRA STRUCTURE WORK WARD 10-Project No.201/2026 - 27 of Kizhakkoth GP-General Civil Work

Tender Information

Tender ID

2026_LSGD_877018_3

Reference Number

AE6/LSGDKKTH/10/55/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Location

BUILDING

Source Website

Subscribe to view

Eligibility / Pre-Qualification

REFER NIT

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical/Finance

RequiredNIT (.pdf)

RequiredPRELIMINARY (.pdf)

RequiredAFFIDAVIT (.pdf)

RequiredEPAYMENT (.pdf)

RequiredSBD (.pdf)

RequiredLICENCE (.pdf)

RequiredADHAR (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹3,178

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

7 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1BUILDING WORK
1.001	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	80.28	sqm	-	-
1.002	OD185627/2026-2027:Engaging labours	2	Day	-	-
1.003	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.05	cum	-	-
1.004	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.05	cum	-	-
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	99.5	kg	-	-
1.006	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	25	kg	-	-
1.007	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	12.5	sqm	-	-
1.008	OD188917/2026-2027:Supplying and fixing square UPVC gutter 160mm size,with MS flat 25mmx5mm size @60cm c/c fixing on roof members (purlin or rafters ),bolts,nuts and washers etc including making necessary connection with rain water pipes complete	2.5	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.22 MB

Work Item Documents

NIT201.pdf

Tender Documents • 0.05 MB

BOQ_1490636.xls

BOQ • 0.30 MB

SBD201.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1BUILDING WORK
1.001	16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.	80.28	sqm	-	-
1.002	OD185627/2026-2027:Engaging labours	2	Day	-	-
1.003	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.05	cum	-	-
1.004	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.05	cum	-	-
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	99.5	kg	-	-
1.006	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	25	kg	-	-
1.007	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	12.5	sqm	-	-
1.008	OD188917/2026-2027:Supplying and fixing square UPVC gutter 160mm size,with MS flat 25mmx5mm size @60cm c/c fixing on roof members (purlin or rafters ),bolts,nuts and washers etc including making necessary connection with rain water pipes complete	2.5	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1BUILDING WORK

1.001

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

80.28

sqm

1.002

OD185627/2026-2027:Engaging labours

Day

1.003

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

0.05

cum

1.004

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.05

cum

1.005

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

99.5

1.006

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

1.007

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.5

sqm

1.008

OD188917/2026-2027:Supplying and fixing square UPVC gutter 160mm size,with MS flat 25mmx5mm size @60cm c/c fixing on roof members (purlin or rafters ),bolts,nuts and washers etc including making necessary connection with rain water pipes complete

2.5

metre