Renovation of Electrical wiring at WTR MW Bldg

Amount

SH - I (WIRING) :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.A) Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

d) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.a) 1 x 1.5 sq. mm

b) 2 x 1.5 sq. mm

C) 3 x 1.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a)20mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.a) 5/6 amps switch

b) 2 way 5/6 amps switch

c) 15/16 amp switch

d) 3 pin 5/6 amp socket outlet

e) 6 pin 15/16 amp socket outlet

f) Bell push

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.a) 3 Module (100mmX75mm)

b) 6 Module (200mmX75mm)

c) 8 Module (125mmX125mm)

d) 12 Module (200mmX150mm)

Supplying and fixing metal box of following sizes(nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.a)100 mm X 100 mm X 60 mm deep

b)150 mm X 75 mm X 60 mm deep

c) 180 mm X 100 mm X 60 mm deep

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (i) 4 way (4 + 12), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (i) 2 + 4 way/6 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a)Single pole

b)Single pole and neutral (for SPAC DB)

c) 40 Amps D.P.(Double Pole) MCB, C-Curve, braking capacity 10kA (Compound Light DB)

d) Triple pole and neutral

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.(a) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and fixing of 2' x 2' size LED based recess mounted type of light fixture (luminaire) with diffusers , 30 watts-36 watts rating, suitable for operation on 230 voltls AC supply, including fixing the fixture on false ceiling with chain supports, GI flexible conduits with coupler for connections, testing etc complete as reqd. (For Equipment room) (Model:- Philips Essential Full glow 2x2 LED 30w RC360B LED 30s / pHILIPS ldtlbk-36w-cdl /Wipro or similar superior make)

S/F of 1200mm sweep ceiling fan suitable for operation on 230 V 50 Hz A.C. Supply i/c making connection, testing etc comp. As required ( M/s Crompton or similar superior make)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(Make:-M/s ANCHOR,HI-FI or similar superior make)

Supplying & fixing wall mounted type air circulator Fan,Sweep 400 mm (16"); Speed 1350 RPM; Power consumption 60 W, sweep suitable for operation on 230 Volts, 50 Hz, single phase A.C. supply, rating including connections, testing, commissioning etc. complete as reqd.(M/s Cromton wave plus or similar superior make)

Replacement of the following ISI marked items i/c credit for non return of faulty item as reqd.a) 4' long 36 Watts flourescent tube rod.

b) feet long 20 W / 18 W LED Tube Rods.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface/cable tray as required. (a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply of XLPE solid aluminium conductor armoured cable of 1.1 KV grade (ISI mark) of the following size directly on surface of wall / cable tray / existing GI pipe including supplying and fixing clamps, screws , credit of faulty item etc. as reqd. a) 2C x 06 sq.mm

b) 4C x 6 sq.mm

C ) 4C x 10 sq.mm

Supplying and fixing Brass Battern/angle Holder i/c connection etc compl as required

Supplying and fixing computer spike guard suitable rating 230 V , single Phase AC supply having 4 Nos Plug outlet connection testing etc as required

Supplyig and fixing 20mm size PVC casing capping on surface/wall i/c saddlling etc compl as required

Supplying and fixing of ISI marked PVC Trunking of size 100 mm x 50 mm size for housing of UPS flexible cables, on surface etc complete as required

Supplying and fixing PVC body Exhaust fan /ventilation fan suitable size (200/300mm) working on 240 V , 50 Hz i/c testing etc as required ( M/s Cromton / Bajaj make or any similar superior make )

Supplying and fixing metal body 300mm Exhaust fan /ventilation fan suitable size working on 240 V , 50 Hz i/c testing etc as required ( M/s Cromton / Bajaj/ Havells make or any similar superior make )

Supplying and fixing of MS box/ Adaptor box made out of 16SWG MS sheet, I/C cutting, welding , bending ,painting and installation at site etc. complete as reqd.

Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Suplying and fixing of suitable size of angle iron frame / structure/MS flat /C Channel of suitable size I/C cutting , welding ,bending, painting, and minor civil work etc as reqd.

SH-II ( ITC of split AC units ) Installation, Testing and commissioning of 1.5 TR/ 2 TR split type AC unit along with the existing copper piping, wiring up to the standard length of 5 mtrs including insulation, flexible PVC pipes and making opening in wall and making good the damages etc., as required.

Supplying & Fixing of additional length (Other than supplied with the AC units) of copper piping of size 1/4" and 5/8" along with 3CX 2.5 sq.mm. PVC insulated PVC Sheathed copper conductor cable including cutting,bending, brazing, insulating incl. all accesores etc.comp. as reqd.

Supplying and fixing of powder coated heavy duty iron stand for mounting outdoor unit of the above AC i/c providing necessary hardware etc complete as required

Supplying & Fixing of following size ISI marked, PVC insulated PVC Sheathed copper conductor cable on surface of wall including making connection with lugs etc. comp. as reqd.a) 3 Core x 2.5 Sq.mm (FLEXIBLE)

Provoding & Fixing of 25mm dia, heavy duty ISI marked PVC pipe for drain water pipe complete with all accessories like bend, elbow, coupling, tee, slotted nipple to accommodate flexible hose pipe incl.making and covring the hole with water tight connection, clamping etc.comp.as reqd.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

POWER ELECTRICALS

STAR ENTERPRISE

RESHA ENTERPRISE