Provision of street lighting i/c replacement of old street light poles at CE Jamnagar.

Amount

Supply of 7 mtrs. high GI OCTAGONAL continuously tapered galvanised street light pole with minimum 1000 mm long single arm GI bracket (length and tilt angle of bracket shall be based on design) for installation of LED street light luminaire, suitable for wind velocity as per IS 875 (but not less than 50 m/sec.), fabricated out of 3 mm thick high tensile sheet steel in single piece construction having 130mm bottom, 70 mm top, suitable for installation on a precast foundation with supply of 4 nos. of foundation bolts & anchor plate, rigid flange plate (200x200x12mm min.) welded with the base of pole for fixing on foundation bolts complete as required for structural stability as specified, weather proof and vandal resistant door flush with the exterior surface containing a terminal plate of 5 mm thick bakelite sheet with 32 Amp heavy duty connector for loop in loop out cable terminations suitable for upto two numbers 4 core 25 Sq.mm cables, including supply of 2A, 10kA, DP, C series, MCB for each fixture connections, earthing bolts for continuous earth connection complete, as required as per technical specifications.

Supply of 7 mtrs. high GI OCTAGONAL continuously tapered galvanised street light pole with minimum 1000 mm long double arm GI bracket (length and tilt angle of bracket shall be based on design) for installation of LED street light luminaire, suitable for wind velocity as per IS 875 (but not less than 50 m/sec.), fabricated out of 3 mm thick high tensile sheet steel in single piece construction having 130mm bottom, 70 mm top, suitable for installation on a precast foundation with supply of 4 nos. of foundation bolts & anchor plate, rigid flange plate (200x200x12mm min.) welded with the base of pole for fixing on foundation bolts complete as required for structural stability as specified, weather proof and vandal resistant door flush with the exterior surface containing a terminal plate of 5 mm thick bakelite sheet with 32 Amp heavy duty connector for loop in loop out cable terminations suitable for upto two numbers 4 core 25 Sq.mm cables, including supply of 2A, 10kA, DP, C series, MCB for each fixture connections, earthing bolts for continuous earth connection complete, as required as per technical specifications.

Supply of 72 W LED street light fitting having system lumen output not less than 7920 lumens and system efficacy of not less than 110 lumens per watt, CCT from 5700K to 6000K, complete with electronic driver and accessories etc, suitable for outdoor applications with min. IP 65, complete as required, as per technical specifications.

Supply of 50 Watt or Equivalent, LED flood light fixture suitable to entry gate lighting system efficacy of not less than 110 lumens per watt, CCT from 5700K to 6000K, complete with electronic driver and accessories etc, suitable for outdoor applications with min. IP 65, complete as required, as per technical specifications.

Supply of following sizes of XLPE insulated, PVC sheathed, Aluminium Conductor, Armoured Power Cable, 1.1 KV grade conforming to IS 7098 (Part-I) 1988 with upto date amendments, complete as required.

3.5 Core x 185 Sq.mm

3.5 Core x 25 Sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3.5 Core x 185 Sq.mm

3.5 Core x 25 Sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required.

Upto 35 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Erection, testing and comissioning of 7 Mtr.high G.I. OCTAGONAL street light pole & bracket with all accessories by providing and making reinforced M 20 cement concrete foundation including excavation and refilling including positioning of template & foundation bolts (supplied with pole to match with pole base plate) & providing and fixing of DWC HDPE pipe of size 40 mm dia (2 pieces of min. 0.75 m length) in the foundation for loop-in-loop-out of the cable along with earthing to the pole complete, as required as per technical specifications.

Installation, testing and commissioning of LED street light fitting with all accessories on existing street light pole of 7 mtr height with bracket, including supplying and drawing of 3core 2.5 sq.mm. FRLSZH PVC insulated PVC sheathed flexible copper conductor cable from loop-in-loop-out box upto the individual streetlight fitting(s), connection etc. complete as required & as specified.

Installation, testing and commissioning of LED Flood light fitting with all accessories on existing Entry gate board with bracket, including supplying and drawing of 3core 2.5 sq.mm. FRLSZH PVC insulated PVC sheathed flexible copper conductor cable from loop-in-loop-out box upto the individual light fitting(s), connection etc. complete as required & as specified.

Excavation of the cable trenches in hard rock not exceeding 1.5 meter in width, and lift upto 1.5 meter, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 meter.

Providing, laying and fixing following dia GI pipe (medium class) in ground complete with GI fittings including trenching (75 cm deep) and refilling etc. as required. 100 mm dia

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 160 mm dia (OD-160 mm & ID-135 mm nominal)

Providing and fixing of advance technology earth electrode earthing system fabricated from hot deep galvanized pipes (pipe in pipe technology) & cavity between pipes pressure filled with highly conductive non-corrosive crystalline material complete with chemically modified homogeneous earth enhancing compound (back fill compound 25 Kg or 50kg as per site requireemnt) to treat the soil for lowering the effective ground impedance for each earth pit to make it maintenance free and to minimize the ground voltage potential rise i/c excavation of earth pit suitable to accommodate earth electrode, prefabricated FRP enclosure with cover plate all as reqd. & conforming to (IS:3043 : 1987 and IEC 62561) duly CPRI/ERDA approved all as required & as specified for Size : Length of electrode = 3 Mtr

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Dismantelling of existing electric poles of heights upto 9mtr from the existing foundation, luminaries etc complete with proper stocking of luminaries & other accessories in AAI store, as required.

Ascent Electrification Engineers

Awasthi Electric Works

DOSHI ELECTRIC ENGG. CO.

jaydeep agency corporation

Yash Energy Pvt. Ltd

HINDUSTAN ELECTRIC COMPANY

Manish Electricals

EXCEL TECHNICAL SERVICES PVT. LTD.

ABHISHEK ASSOCIATES

Hitesh P. Patel