Kerala

Active

Works

Civil Works - Roads

Nadathara GP 44/26-27 Buds rehabilitation centre maintenance

Local Self Government Department

Nadathara GP | Thrissur, Kerala

Amount: ₹1.7 LCloses: 5 Oct 20267d left

Timeline

Published28 Sept 2026
Closes5 Oct 2026
Bid Opening6 Oct 2026

Tender Value

₹1.7 L

EMD Value

₹4,227

Closing Date

5 Oct 2026, 11:00 am7d left

Tender Inviting Organisation

Name

Assistant Engineer

Address

Assistant Engineer

Work Description

Nadathara GP 44/26-27 Buds rehabilitation centre maintenance

Tender Information

Tender ID

2026_LSGD_872791_1

Reference Number

38/AE/LSGD/NDA/26-27

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Period of Work

180 days

Location

Nadathara GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredBid Security/submission fee remit (Bid fee details) (.pdf)

RequiredBid submission letter as per item no-1Part-VI(FOT) (.pdf)

RequiredIntegrity pact certificate as per item no-3 Part VI (.pdf)

RequiredPreliminary Agreement as per item no-2 Part VI (.pdf)

RequiredRequisition for e-payment as per item no-6 Part VI (.pdf)

RequiredAffidavit as per item no-4 Part -VI (.pdf)

RequiredSBD download from etender website (.pdf)

RequiredContractors Licence (.pdf)

RequiredCopy of PAN Card (.pdf)

RequiredCopy of GST Documents (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹4,227

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Sept 2026

Published

28 Sept 2026

Bid Opening

6 Oct 2026

Download Starts

28 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

28 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1MAINTENANCE
1.001	13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	258	sqm	-	-
1.002	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	555	sqm	-	-
1.003	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.22	cum	-	-
1.004	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.27	cum	-	-
1.005	OD55992/2026-2027:Labour	3	each	-	-
1.006	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	16.65	kg	-	-
1.007	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	2.76	sqm	-	-
1.008	21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	15.7	sqm	-	-
1.009	10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces	2	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.04 MB

Work Item Documents

BOQ_1480260.xls

BOQ • 0.30 MB

BIDFEE.pdf

Tender Documents • 0.01 MB

FOT.pdf

Tender Documents • 0.03 MB

integrity.pdf

Tender Documents • 0.02 MB

PA.pdf

Tender Documents • 0.29 MB

epaymentform.pdf

Tender Documents • 0.01 MB

AFFIDAVIT.pdf

Tender Documents • 0.02 MB

BUDSSBD.pdf

Tender Documents • 1.90 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1MAINTENANCE
1.001	13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.	258	sqm	-	-
1.002	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	555	sqm	-	-
1.003	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.22	cum	-	-
1.004	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.27	cum	-	-
1.005	OD55992/2026-2027:Labour	3	each	-	-
1.006	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	16.65	kg	-	-
1.007	21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side	2.76	sqm	-	-
1.008	21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)	15.7	sqm	-	-
1.009	10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces	2	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1MAINTENANCE

1.001

13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

258

sqm

1.002

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

555

sqm

1.003

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

0.22

cum

1.004

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

0.27

cum

1.005

OD55992/2026-2027:Labour

each

1.006

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

16.65

1.007

21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

2.76

sqm

1.008

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm)

15.7

sqm

1.009

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

sqm