SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS & POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY OUTGROWTH GRANT YEAR 2025-26

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS & POLES

AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY OUTGROWTH

GRANT YEAR 2025-26

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Location Chart Amount

1 SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF STREET LIGHTS & POLES

FROM GALAXY DHABA TO SANTALPUR DHAR IN VANTHLI NAGARPALIKA DI.

2 SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF STREET LIGHTS & POLES

FROM DR. AMBEDKAR STATUE TO KESHOD CHOKDI IN VANTHLI NAGARPALIKA DI.

3 SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF STREET LIGHTS & POLES

IN DILAVAR NAGAR AREA IN VANTHLI NAGARPALIKA DI. JUNGADH

Total Amount Rs.

Total Amount Rs.

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

Item Description of Item (With brief Quantity Unit Rate Amount

No. specification and reference to book of

1 Supplying and erecting approved 9mtr 19.00 No. 23230.00

Height Decorative cast base pole of

165.1mm Dia with 4.85mm thickness

upto 2 mtr bottom portion and 101mm

Dia with 4mm thickness in remaining

portion of pole having 400x4000x16mm

Base Plate. The pole should be made as

per IS. and shall be coated with primer

and paint , suitable suspend local wind

speed. and 4 no. of 650mm Long J Type

bolt with nuts and washer and Decorative

Dual Arm bracket. etc complete as

approved by Engineer Incharge.

2 Supplying and erecting approved 9mtr 33.00 No. 21210.00

Height Decorative cast base pole of

165.1mm Dia with 4.85mm thickness

upto 2 mtr bottom portion and 101mm

Dia with 4mm thickness in remaining

portion of pole having 400x4000x16mm

Base Plate. The pole should be made as

per IS. and shall be coated with primer

and paint , suitable suspend local wind

speed. and 4 no. of 650mm Long J Type

bolt with nuts and washer and Decorative

Single Arm bracket. etc complete as

approved by Engineer Incharge.

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

3 Supplying and erecting approved make 164.00 Ea 15705.50

Octagonal pole made from HR sheet

steel. The pole should be made as per IS.

and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759,

suitable suspend local wind speed with

integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and

arrangement for cable termination to be

erected With Suitable foundation

(Included) as per details given by

manufacturer considering site

(H) 9 Mtr. Long 70 mm Top X 155 mm

bottom dia, 3 mm thickness with

260mmX260mmX16mm base plate, 4-

M24 Bolts and 750mm long with

necessary G.I. J Bolts .Approx Pole weight

4 Supplying and erecting street light pole 164.00 No. 795.88

bracket comprising main B Class GI pipe

of 4.2 cm/require outside dia. complete

with suitable B Class GI sleeve tubing of

approx. 45cms.length and suitable for

76.5mm/80mm or require size pole top

having sufficient fastners for fixing the

brackets and having suitable rise as per

site condition as directed and spread of

mtr.with suitable welded stiffener reducer

and with lock nut complete painted with

one coat of Red oxide / PU base primer

and two coats of Aluminium / PU paint.

Suitable for side entry fitting brackets of

following nos of arms.

[a] Single Arm bracket 2 Mtr

5 Excavating hard rock or bituminous road 133.25 Cum 599.94

(B.T.) by chiselling or using tool and

tackles for preparing pit for poles or earth

plates or for laying pipes & clearing the

site by removing debris & making site

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

6 Providing 1:2:4 cement concrete 216.00 Ea 1652.36

foundation & 70 % PCC from bottom

including excavation for the pole of size

60 x 60 x 150 cm. Deep in below ground

level with plinth of 45 cm x 45 cm(or

cm dia x 45 cm) high upper ground level

with necessary curing and finishing in

approved manner.

( for 9 & 10 mtr pole)

7 Supplying and erecting LED street light / 235.00 No 5976.17

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and

heat sink extruded aluminium with

diffuser and Polycarbonate optics/

lenses, with toughened glass with

company mark/name engraved or

embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

(iii) Above 60 to 90 watts

Supplying & erecting approved make 298.00 No 1216.04

SMC press moulded composite FRP. loop-

in, loop-out approx. 2mm thick box

complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob

& hinged doors as per requirement having

locking arrangements with mounting

clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps&

earth bolt of following size of box.

(H) 300mm x 200mm x 135mm [deep]

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

9 Supplying & erecting approved make 11.00 Ea 3168.37

Digital time switch having lithium cell

years operative and operate battery

backup 1 channel day clock with

memory programme, suitable to operate

on 240V + 5%, 16A with, floating contacts

Minimum switching setup time

minimum & LCD display. Also comprised

permanent ON/OFF switching.

Programming switches & housed in fire

proof thermoplastic enclosure &

transparent cover erected as required

with necessary connection erected as

10 Supplying & erecting power contactor 11.00 Ea 2782.55

,AC3 duty for time switch complete

erected as per direction Cat III

(D) 4 pole 440V 40 Amp.

11 providing and erecting Miniature circuit 298.00 Ea 270.68

breaker single pole 0.5A to 2A system and

having breaking capacity 10 KA to be

erected in existing box. confirming to IS

8828/1996 with ISI Mark

12 Providing and erecting Pipe type earthing 298.00 Ea 368.65

having 150 cms.long and 2.5 cms. dia.

galvanised iron pipe with coupling and

buch buried in specially prepared earth

pit complete with necessary 8 SWG earth

13 Providing and erecting HOT deep 298.00 Kg 77.77

Galvanised iron strip wire 8 to 16 SWG.

14 Providing and erecting XLPE(IS:7098)(I)-88 7658.00 Rmt 673.67

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 10 Sq. mm

15 Supplying & erecting XLPE(IS:7098)(I)-88 3000.50 Rmt 99.99

ISI unarmoured copper cable 1.1 KV grade

to be erected as directed of following size.

(A) 2 core 2.5 Sq. mm

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

16 Providing & laying approved make Double 6664.00 Rmt 62.62

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II

)with necessary connecting accessories

of same material at required depth in

existing trench for laying of cable. below

ground / road surface for enclosing cable

(A)50 mm outer dia

17 Making trench in Hard Murrum / Tar Road 5960.00 Rmt 62.62

of suitable width of 90 cm or required

depth for laying any size of cable or

locating the fault all over the run and

back filling the same and making the

surface as normal ground.

18 Providing and erecting Approved make 11.00 Ea 6173.12

Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to

25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C.

supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

ICS=100% of ICU only Cat III

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

19 Supplying & erecting earth pit of minimum 11.00 Ea 5760.03

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron

galvanising, connection terminal dia of

12mm with constant ohmic value

surrounded by highly conductive

compound with high charge dissipation

suitable for following type of applications

with chamber and heavy duty cover.

(A)(approved make OEM has to submit

test certificate including value of earth

resistance of installation duly stamped

and signed by agency and officer Incharge

has to ensure the value of earthing

resistane mentioned in test Certificate) &

having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound

should be capable to retain moisture for

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

20 Supplying & erecting IP 55 grade following 11.00 Ea 3595.60

size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made

from jointless M.S. Angle with cable

clamps to be buried in ground to have

appropriate erection to work uniform until

erected with cement concrete foundation

and 45 cm high bricks work finishing with

plaster etc. hinged double door internally

supported on both side, with internal and

outside looking arrangement with look

and keys in duplicate 35 x 35 x 5 mm M.S.

Angle of Two Nos. one is welded and

other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar

inside and out side with three tank

powder coated paint. section pillar roof

should be without joint with water leakage

proof & tested as per IP 55 test & followed

(B) 75 X 60 X 45 cm section pillar

fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X

35 X 5 mm thick MS angle.

21 Demolition including stacking of 153.20 Cum 1082.35

serviceable materilas and disposal of

unserviceable materials with all lead and

lift. (i) R.C.C. work

22 Providing and laying Cement concrete 82.08 Cum 3218.87

1:3:6 (1 Cement : 3 coarse sand :

machine cut stone aggregates 40 mm

nominal size) and curing complete

excluding cost of formwork etc complete.

(A) Foundation and plinth

23 Providing and casting in situ controlled 123.12 Cum 5300.56

cement concrete M-200 for average

mm thick wearing coat laid as directed

dincluding tamping, vibrating, finishing,

curing and fillingin joints with bitumen

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

24 Supplying and erecting approved make 82.00 Ea 8192.11

Octagonal pole made from HR sheet

steel. The pole should be made as per IS.

and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759,

suitable suspend local wind speed with

integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and

arrangement for cable termination to be

erected With Suitable foundation

(Included) as per details given by

manufacturer considering site

(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-

M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight

25 Providing and erecting street light pole 82.00 No. 614.08

bracket comprising main B Class GI pipe

of 4.2 cm/require outside dia. complete

with suitable B Class G.I sleeve tubing of

approx. 45cms.length and suitable for

76.5 mm / 80mm. / require size pole top

having sufficient fasteners for fixing the

brackets and having spread of 1 mtr.

length with suitable rise as per site

condition & suitable welded stiffener

reducer and nipple with check nut

complete painted with one coat of Red

oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following

[A] Single Arm bracket 1 Mtr

26 Providing 1:2:4 cement concrete 82.00 Ea 809.01

foundation & 70 % PCC from bottom

including excavation for the pole of size

45 x 45 x 100 cm. Deep in below ground

level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level

with necessary curing and finishing in

approved manner.

( for 4 & 6 mtr pole)

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

27 Supplying and erecting LED street light / 82.00 No 4997.48

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free

High pressure die cast aluminum housing

with smooth finish powder coated and

heat sink extruded aluminium with

diffuser and Polycarbonate optics/

lenses, with toughened glass with

company mark/name engraved or

embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

(ii) above 48 to 60 Watts

Providing and erecting XLPE(IS:7098)(I)-88 2050.00 Rmt 508.03

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in

existing trench / pipe at road crossing or

floor of following size of cables.

(C) 4 core 6 Sq. mm

29 Dismentaling tiled of stone floors laid in 192.00 Sqm 49.12

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

30 Providing the W.B.M. GR-II Surface using 28.80 Cum 1048.38

B.T.Metal 45mm to 63mm with using

screening 13-20mm size and stone dust

as filler 150mm compacted thickness in

two layers spreading including watering

and consolidation of W.B.M. with

vibratory roller including cost of binding

material etc. complete.

NAME OF WORK :- SUPPLY INSTALLATION TESTING & COMMISSIONING OF STREET LIGHTS &

POLES AT DIFFERENT LOCATIONS IN VANTHLI NAGARPALIKA DI. JUNGADH under SJMMSVY

OUTGROWTH GRANT YEAR 2025-26

BILL OF QUANTITIES

31 Providing and fixing pre-cast Rubber Dye / 192.00 Sqm 706.93

steel Dye inter locking concrete block

60mm thick with grade of concrete M300

pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the

joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc.

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should be written

in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor.

Consultant / Municipal Engineer Chief Officer President

Vanthali Nagarpalika Vanthali Nagarpalika Vanthali Nagarpalika

Vanthali Vanthali Vanthali