Karimpalil Koickal Devaswom Haripad Group-Repairs and Maintenance to Temple structure

Appendix I - Karimpalilkoickal Devaswom-Haripad Group-Repairs and maintenance to Temple structures

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.

Supplying and fixing Dept. wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc . complete.

Roofing with 400 mm or nearest available size MP hip and ridge tiles (Depertmental) first class set in CM 1:4 including finishing the edges

Roofing with departmental MP tiles (Mangalore Pattern) Tiles 410x235 mm or nearest vailable size (Single groove)

Supplying 400 mm or nearest available size MP hip and ridge tiles first class

Supplying MP roofing tiles (Mangalore Pattern) Tiles 410x235 mm or nearest vailable size (Single groove)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Cleaning the old painted surface having algae and other impurities using pressure washer including labour and hire of pump etc complete.

Painting with oil type wood preservative of approved brand and manufacture:Old work (one or more coats)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position all complete. Using the departmental channel.

Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. Complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix)

Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Supplying and fixing in position stone pillar having height upto 2m (in 2 pieces-Base and stem) Size of Base piece (Oma) is approximately 30cm X 30cm (10 ankulam) and bottom size of stem approximately 24cm X 24cm (8 ankulam) with necessary provision (kuduma) for jointing with wall plate base (pothika). The stone pillar should have 2 set of regular octagonal portion ornamentation and should be tapered from bottom to top. For payment purpose the height of base and stem is only considered (height below wooden pothika). Rate includes value of material, Conveyance charges, Fixing charges inlcuding all hire charges of necessary equipments for fixing.

Supplying and fixing in position stone pillar having height from 2m to 3m (in 2 pieces-Base and stem) Size of Base piece (Oma) is approximately 36cm X 36cm (12 ankulam) and bottom size of stem approximately 30cm X 30cm (10 ankulam) with necessary provision (kuduma) for jointing with wall plate base (pothika). The stone pillar should have 2 set of regular octagonal portion ornamentation and should be tapered from bottom to top. For payment purpose the height of base and stem is only considered (height below wooden pothika). Rate includes value of material, Conveyance charges, Fixing charges inlcuding all hire charges of necessary equipments for fixing.

Supplying and fixing in position stone pillar having height from 3m to 4m (in 2 pieces-Base and stem) Size of Base piece (Oma) is approximately 45cm X 45cm (15 ankulam) and bottom size of stem approximately 36cm X 36cm (12 ankulam) with necessary provision (kuduma) for jointing with wall plate base (pothika). The stone pillar should have 2 set of regular octagoanal portion ornamentation and should be tapered from bottom to top. For payment purpose the height of base and stem is only considered (height below wooden pothika). Rate includes value of material, Conveyance charges, Fixing charges inlcuding all hire charges of necessary equipments for fixing.