Special repair to HRTC Residential Colony at Dehra Distt Kangra HP

Amount

Repairs to plaster of thickness 12 mm (Twelve milimeter) to 20 mm (Twenty milimeter) in patches of area 2.5 (Two point five milimeter) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge. With cement mortar 1:4 (One cement isto four fine sand), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and applying white cement based putty of average thickness 1 mm, (One milimeter) of approved brand and anufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres (Fifty meter) lead :- Of area 3 sq. metres (Three Square meter) and below, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood ,including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

52 mm (Fifty two milimeter) thick cement concrete flooring with concrete hardener topping, under layer 40 mm(Forty milimeter) thick cement concrete 1:2:4 (One cement isto two coarse sand isto four ) graded stone aggregate 20 mm (Twenty milimeter) nominal size and top layer 12 mm (Twelve milimeter) thick cement hardener consisting of mix 1:2 (One cement hardener mix isto two graded stone aggregate six milimeter) nominal size by volume, hardening compound mixed @ 2 litre per 50 kg (Fifty Kilogram) of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm, (Two hundred fifty into sixteen milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :- 150x10 mm, (One hundred fifty into ten milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :- 125 mm, ( One hundred twenty five milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing bright finished brass hard drawn hooks and eyes :- 150 mm, (One hundred fifty milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :- One or more coats on old work, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :- Old work (one or more coats), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) ( Two point twenty kilogram / ten square meter) over priming coat of primer applied @ 0.80 litrs/10 sqm (Zero point eighty litrs/ ten square meter) complete, including cost of Priming coat.,including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm (Seventeen kilogram per ten square meter) impregnated with a coat of coarse sand at 60 cudm per 10 sqm (Ten square meter), including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete With residual type petroleum bitumen of grade VG -10 ,including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (One cement isto three fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm (Twelve milimeter) layer of cement mortar 1:3 (One cement isto three fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 ,including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm (Four point zero milimeter) thick glass panes , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc, 15 mm ( Fifteen milimeter) dia nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (One hundred milimeter) sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (Five hundred eighty into four hundred forty milimeter) with integral type foot rests , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge

Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen milimeter) C.P. brass pillar taps, 32 mm (Thirty two milimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:- White Vitreous China Wash basin size 550x400 mm (Five hundred fifty into four hundred milimeter) with a pair of 15 mm (Fifteen milimeter) C.P. brass pillar taps, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, 10 litre capacity - White, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm (Six hundred milimeter) long towel rail with total length of 645 mm (Six hundred forty five milimeter) width 78 mm (Seventy eight milimeter) and effective height of 88 mm, (Eighty eight milimeter) weighing not less than 190 gms, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm, (One hundred thirty eight milimeter) breadth 102mm (One hundred two milimeter) height of 75mm (Seventy five milimeter) with concealed fitting arrangements, weighing not less than 106 gms, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:- 15 mm (Fifteen milimeter) nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm (Fifteen milimeter) nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :- 45 cm (Forty five centimeter) length 15 mm (Fifteen milimeter) nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (Fifteen milimeter) nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion, (i) Single socketed pipes. 110 mm (One hundred ten milimeter) diameter, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Bend 87.5° 110 mm (One hundred ten milimeter) bend, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Coupler .. 110 mm (One hundred ten milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Single tee without door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten milimeter ) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm (Thirty two milimeter )dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm (One hundred milimeter ) nominal dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.

ILLUMINATE MANAGEMENT AND GLOBAL SERVICES PVT LTD

shri chand