Construction of Coy. office OPS room, Sos accommodation, Guest house and ORs living accommodation at Goting post

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary Rock. (AOR 2021, item 2.7.1)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In ordinary rock.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (1:5:10) (1 Cement :5 Coarse sand :10 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:2:4 ( 1 Cement: 2coarse sand : 4 graded stone aggregate 20 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 Cement : 6 coarse sand)

Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

5.1.2) Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for foundations, bases of columns, beams etc for mass concrete up to plinth.

Centering and shuttering including strutting, propping etc. and removal of form for Shelves

Centering and shuttering including strutting, propping etc. and removal of form for lintels and beams etc .

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, beams etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts above plinth level.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: Sal wood. ( Weight of sal wood should be 865 kg/cum and should be confirming IS:399:1963)

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : 9.3.1 Sal wood. ( Weight of sal wood should be 865 kg/cum and should be confirming IS:399:1963)

6 mm cement plaster of mix 1:6 (1cement :6 fine sand)

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete : Hot finished welded type tubes.(Tata/Jindal (Hissar) medium

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120 GSM as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm).

Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 6mm thick

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :. 18 mm thick

Providing and fixing 50 mm thick thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183. Density 16Kg/cum, 50 mm thick, wrapped in 200G Virgin Polythene bagsplaced over false ceiling and behind plywood to be provided for inside wall insulation and held in position by criss-crossing GI wire.

Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Enginner-in-charge.

Providing and fixing deodar wood beading of size 35x10 mm to ceiling frames with iron screws, plugs and priming coat on unexposed surface etc complete(As per actual analysis ) Details of cost for 1.0 mtr ( As per Actiual analysis)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enameled M.S butt hinges with necessary screws (screw should be stainless steel and brand Magnum/ nettle fold/Amul)excluding, paneling which will be paid for separately(thickness of shutter should be 35mm). 2nd Class Teak wood. 35 mm thick shutter.

Providing and fixing 25 mm thick panelled or panelled and glazed shutters for cupboards including ISI marked black enameled M.S butt hinges with necessary screws (screw should be stainless steel and brand Magnum/ nettle fold/Amul)excluding, paneling which will be paid for separately. 2nd Class Teak wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 12 mm thick Pre-laminated board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm. (4 mm thick) double glass panes including black enameled ISI marked M.S butt hinges with necessary screws. 2nd class Teak wood. 30 mm thick

Providing and fixing 4 mm thick float glass panes with with wooden beadings of second class teak wood etc complete.

Providing and fixing aluminum sliding classic marked anodized ( anodic coating not less than grade AC 10 as per IS : 1068 ) transparent or dyed to required colour or shade with necessary screws etc. complete:( Screws should be of stainless steel and brand Magnum/Nettle Fold/ Amul) 300x16mm

Providing and fixing aluminum tower bolts Classic marked anodized ( anodic coating not less than grade AC 10 as per IS : 1068 ) transparent or dyed to required colour or shade with necessary screws etc. complete: ( Screws should be of stainless steel and brand Magnum/Nettle Fold/ Amul) 150x10mm

Providing and fixing aluminum tower bolts Classic marked anodized ( anodic coating not less than grade AC 10 as per IS : 1068 ) transparent or dyed to required colour or shade with necessary screws etc. complete: ( Screws should be of stainless steel and brand Magnum/Nettle Fold/ Amul) 250x10mm

Providing and fixing ISI marked oxidised Aluminium handles conforming to IS:4992 black finish, with nuts and screws etc complete of size 125 mm.

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :

Providing and fixing aluminium casement stays, ISI marked, anodised transparent or dyed to required colour and shade, with necessary screws etc complete.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete (NS)

Providing and fixing 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with first class Deodar wood

Providing and fixing 25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with first class teak wood

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 ( thickness to be specified by the manufacture) of approved make in all colours, shade except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1cement:3 course sand ) and jointing with grey cement slurry @ 3.3 kg/ sqm including pointing in white cement mixed with pigments of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : (Analysis-73)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, Jet pressure device, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid. ( AOR 17.2.2)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250mm.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make: Rectangular shape 453x357mm

Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing Steel peg batten with 6 Nos steel peg.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (internal work, exposed on wall) and painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality. : 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 15 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank .

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing CP brass stop cock 15 mm dia ( concealed) of make Parko/Kingstone/Essco confirming to IS:8931

Providing and fixing Nahani trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating stone masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type

Providing and fixing soil, waste and vent pipes : 100 mm dia PVC pipe

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing, laying and jointing PVC (Heavy) pipes 100 mm dia nominal bore with solvent including testing of joints etc. complete including all necessary fittings. MAKE PRINCE/PRAKASH/FINOLEX/AKG /SUPREME /TIRUPATI

Finishing wall with water proofing cement paint of required shade: New work (Two or more coats @ 3.84 Kg/10 sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Applying priming coat With ready mixed pink or grey primer of Asian/Jonson & Nicolson brand and manufacture on wood work (hard and soft wood)

Applying a coat of water thinnable cement primer of approved brand and manufacturer on wall surface with Water thinnable cement primer.

Painting with synthetic enamel paint of Nerolac/Jenson & Nicolson/Asian (1st quality) to give an even shade: two or more coats on new work.

Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or square or round bars etc. including priming coat with approved steel primer all complete. : Fixed to openings/wooden frames with rawl plugs screws etc.

20 mm cement plaster of mix 1:6

DRDO Design Bio-Digester Tank For Four Pan Bio Toilet upto 6 Years Conforming to Model : Biodigester-50-FRP(Spec.No. DRDE/BT/BD50/2013/03) Total volume to decompose human excrete-3470 Ltrs. with the help of anaerobic bacteria in a underpit at the bottom of Bio-toilet shelterConforming to constructional and detailed specification DRDE,Gwalior Drawing No. BD-50-GA001,SA001,SA002,PD001 to PD013 Tank made out of FRP Sheet - Thickness at top in mm- 20 Tank made out of FRP Sheet - Thickness at bottom - in mm 20 Tank partition wall thickness in mm-7

Wiring for light point/fan point/ exhaust point/ call ball point with 1.5 sq. mm FRLS PVC insulated copper conducter single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/ISI), with piano type switch (Anchor/CONA), phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conducter single core cable (Plaza/Havell's/Anchor) etc as required. Group A

Wiring for circuit/sub main wiring along with earth wire with 2x1.5 sq mm + 1x1.5 sq mm earth wire FRLS PVC insulated copper conducter, single core cable in surface/ recessed 20 mm PVC conduit (Polymer/Polyfit/Anchor/ISI) as required. Wire should be of Plaza/Havell's/Anchor)

Wiring for circuit/sub main wiring along with earth wire with 2x4 sq mm + 1x4 sq mm earth wire FRLS PVC insulated copper conducter, single core cable in surface/ recessed PVC conduit (Polymer/Polyfit/Anchor/ISI) as required. Wire should be of Plaza/Havell's/Anchor)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, incuding P/F 6 pin 15/16 amps piano type socket outlet and 15/16 amps piano type switch, connections etc as required

Supplying and fixing PVC angle/Batten holder (Anchor/Ambit) including connections etc. as required.

Supplying and fixing MCB DB 4ways (Havell's) complete with connections, testing and commissioning etc as required.

Supplying and fixing double Pole 40 Amp, 240 volts, isolator (Havells) in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supplying and fixing 16 Amp rating, 240/415 volts (Havells), "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole

Supplying and fixing 18 watt LED batten fitting (Havell's/Philips/Bajaj) complete

Wiring for light /POWEr PLUG with 2X4 sq. mm FR PVC insulated copper conducter single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with1 N0. 4 Sqmm FR PVC insulated copper conducter single core cable etc as required.( Item No. 1.12 A.O.R.- 2012 internal) Group A Cost for 1 Point

Providing and installation of sunray 800w plain panels for central heating having Voltage-150-250V Power 900 w Max Amp 4.2 Surface temp. 85c-100c Size 90x60x1.5cm weight 11kgs Wall mount with 3 years warranty

P & Installation of Exhaust fan 0.5 hp

P & Installation of 15 ltr geyser

BHAGAT SINGH CHAUHAN

APS STRUCTURE PVT LTD