Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹49.1 L+₹2.8 L (6.01%)Rejected-Finance 121 MADHAV SQUAR OPP AVANTIKA COMPLEX LIMDA LANE JAMNAGAR 361001 | JAMNAGAR | GUJARAT | 361001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹51.1 L+₹4.8 L (10.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹60.3 L+₹14.0 L (30.3%)Rejected-Finance PLOT NO 626 627 GIDC BEHIND GANGOTRI DIARY PORBANDAR 360 577 | PORBANDAR | GUJARAT | 360577 | L4 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Manish Kumar, IDSE, Garrison Engineer
GE Navy Porbandar Tija Mile Porbandar
PROVISION OF CERTAIN SANCTION WORKS AT INS SARDAR PATEL AND NAVAL AIR ENCLAVE UNDER GE NAVY PORBANDAR
2023_MES_633769_1
9221/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Garrison Engineer Navy
₹90,000
Yes
22 Feb 2024
21 Dec 2023
30 Jan 2024
21 Dec 2023
27 Jan 2024
13 Jan 2024
21 Dec 2023 - 12 Jan 2024
Amount
Supply and lay cable 1100 Volts grade LT XLPE insulated PVC sheathed and armoured with stranded aluminium conductor of sizes mentioned below:-
150 sqmm 3.5 core
120 sqmm 3.5 core
25 Sqmm 3.5 core
16 Sqmm 4 core
10 Sqmm 2 core
Excavation in trenches in hard /dense soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and directed at site.
Excavating over areas, not exc.1.5 m deep and getting out in hard dense soil complete all as specified and directed by Engr-in-charge.
Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site
Removing excavated surplus soil (Soft/hard soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.
Removing excavated material ( soil) to distance of exc. 1Km but not exc. 5Km and depositing outside MD land where directed.
S& F of laying of Double Walled Corrugated (DWC) HDPE pipe of following size of conforming to IS 16205 Part -24 including necessary bends,coupling ,tees, reducers, spacers,end caps, rubber rings etc having pressure rating not less than 450 N through trenches/wall/floor/on pole in any type of soil for protection of electric cable complete all as directed by Engr-In Charge.
90/75 mm outer/inner dia
75/63 mm outer/inner dia
50/38 mm outer/inner dia
40/32 mm outer/inner dia
Supply , install, Design testing and commissioning of CPRI approved factory made and tested outdoor type floor mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 100 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15 mm CRCA MS sheet with projected globe roof for rain water protection Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and 50 X 50 X 6 mm thick MS angle iron frame 60 cm above and 60 cm below normal ground level work front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and PCC foundation in cement concrete 1:3:6 (20 mm graded stone aggregate, testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar TPN 100 Amps - 01 Set (b)VAF + PF meter, Cl 1 (L &T Cat Part No - WL411010OOOO) -01 Nos (d) Phase indicating lamp R, Y, B LED (L &T Model No-EPL R/Y/B/240VAC ) - 01 Set (e) CT of suitable ratio - 3 Nos (f) MCCB 80 A TPN 25 kA with thermal magnetic release -01 Nos (g) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a) 5 Pin Industrial Panel Socket 16 Amps 3 Phase, earth contact position 6 O' clock (Havells/ Schneider/ Legrand/ L&T) -01 Nos (b) MCB TPN 16 Amps -01 Nos (c) Type 'D' universal power socket 1 phase, 220V, 16Amps (Havells/ L&T / Legrand/ Schneider) -01 No (d)MCB SP 16 Amps -01 No, MCCB make - Legrand/ Schenider/ L&T
Supply , install, Design testing and commissioning of CPRI approved factory made and tested outdoor type floor mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 100 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15 mm CRCA MS sheet with projected globe roof for rain water protection Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and 50 X 50 X 6 mm thick MS angle iron frame 60 cm above and 60 cm below normal ground level work front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and PCC foundation in cement concrete 1:3:6 (20 mm graded stone aggregate, testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar TPN 100 Amps - 01 Set (b)VAF + PF meter, Cl 1 (L &T Cat Part No - WL411010OOOO) -01 Nos (c) Phase indicating lamp R, Y, B LED (L &T Model No-EPL R/Y/B/240VAC ) - 01 Set (e) CT of suitable ratio - 3 Nos (f) MCCB 40 A TPN 25 kA with thermal magnetic release -01 Nos (g) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a) 5 Pin Industrial Panel Socket 16 Amps 3 Phase, earth contact position 6 O' clock (Havells/ Schneider / Legrand/ L&T) -01 Nos (b) MCB TPN 16 Amps -01 Nos (c) Type 'D' universal power socket 1 phase, 220V, 16Amps (Havells/ Schneider/ Legrand/ L&T) -01 No (d)MCB SP 16 Amps -01 No, MCCB make - Legrand/ Schenider/ L&T
Supply , install, Design testing and commissioning of CPRI approved factory made and tested indoor type wall mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 100 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2.00 mm CRCA MS sheet with Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar TPN 100 Amps - 01 Set (b) VAF + PF meter, Cl 1 (L &T Cat Part No - WL411010OOOO) -01 Nos (c) Phase indicating lamp R, Y, B LED (L &T Model No-EPL R/Y/B/240VAC ) - 01 Set (d) CT of suitable ratio - 3 Nos (d) MCCB 80A TPN 25 kA with thermal magnetic release -01 Nos (e) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a) 5 Pin Industrial Panel Socket 16 Amps 3 Phase, earth contact position 6 O'clock ((Havells/ Schneider/ Legrand/ L&T) -02 Nos (b) MCB TPN 16 Amps -02 Nos (c) Type 'D' universal power socket 1 phase, 220V, 16Amps ((Havells/ Schneider/ Legrand/ L&T) -06 No (d)MCB SP 16 Amps -06 No, MCCB make - Legrand/ Schenider/ L&T
Supply , install, Design testing and commissioning of CPRI approved factory made and tested indoor type wall mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 80 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2.00 mm CRCA MS sheet with Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar TPN 80 Amps - 01 Set (b) VAF + PF meter, Cl 1 (L &T Cat Part No - WL411010OOOO) -01 Nos (c) Phase indicating lamp R, Y, B LED (L &T Model No-EPL R/Y/B/240VAC ) - 01 Set (d) CT of suitable ratio - 3 Nos (e) MCCB 40A TPN 25 kA with thermal magnetic release -01 Nos (e) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a) 5 Pin Industrial Panel Socket 16 Amps 3 Phase, earth contact position 6 O'clock ((Havells/ Schneider/ Legrand/ L&T) -01 Nos (b) MCB TPN 16 Amps -01 Nos (c) Type 'D' universal power socket 1 phase, 220V, 16Amps ((Havells/ Schneider/ Legrand/ L&T) -03 No (d)MCB SP 16 Amps -03 No, MCCB make - Legrand/ Schenider/ L&T
Supply , install, Design testing and commissioning of CPRI approved factory made and tested indoor type wall mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 80 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2.00 mm CRCA MS sheet with Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar TPN 80 Amps - 01 Set (b) VAF + PF meter, Cl 1 (L &T Cat Part No - WL411010OOOO) -01 Nos (c) Phase indicating lamp R, Y, B LED (L &T Model No-EPL R/Y/B/240VAC ) - 01 Set (d) CT of suitable ratio - 3 Nos (e) MCCB 40A TPN 25 kA with thermal magnetic release -01 Nos (e) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a) 5 Pin Industrial Panel Socket 16 Amps 3 Phase, earth contact position ((Havells/ Schneider/ Legrand/ L&T) -02 Nos (b) MCB TPN 16 Amps -01 Nos, MCCB make - Legrand/ Schenider/ L&T
Supply , install, Design testing and commissioning of CPRI approved factory made and tested outdoor type floor mounted LT panel board, cubical type suitable for 240 volts, 1 phase, 2 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 63 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 3.15 mm CRCA MS sheet with projected globe roof for rain water protection Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and 50 X 50 X 6 mm thick MS angle iron frame 60 cm above and 60 cm below normal ground level work front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and PCC foundation in cement concrete 1:3:6 (20 mm graded stone aggregate, testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar DP 63 Amps - 01 Set (b) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a) Type 'D' universal power socket 1 phase, 220V, 16Amps ((Havells/ Schneider/ Legrand/ L&T) -01 No (d) MCB SP 16 Amps -01 No, MCCB make - Legrand/ Schenider/ L&T
Supply , install, Design testing and commissioning of CPRI approved factory made and tested indoor type wall mounted LT panel board, cubical type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved Copper bus bar of rating 100 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2.00 mm CRCA MS sheet with Dust & Vermin proof, including Neoprene rubber gasket, Bottom detachable Gland Plate comp-lete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. front & back opening double door type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm, cable lugs,MCCB Spreaders links, cable glands and testing after installation including complete all as specified & directed and comprising of followings:- (A) Incoming:- (a) Copper bus bar TPN 100 Amps - 01 Set (b) VAF + PF meter, Cl 1 (L &T Cat Part No - WL411010OOOO) -01 Nos (c) Phase indicating lamp R, Y, B LED (L &T Model No-EPL R/Y/B/240VAC ) - 01 Set (d) CT of suitable ratio - 3 Nos (e) Onload Manual Change Over Switch Open execution type 100 Amps -01 Nos (e) Danger notice plate/ sticker of suitable size on front panel board -01 No (B) Outgoing:- (a)MCCB 100 A TPN 25 Ka (L &T) CM91712OOKOOG -01 Nos, MCCB make - Legrand/ Schenider/ L&T
M&L Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing 32x6mm GI strip & duly filled with earthing chemical powder all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion concrete earth pit for watering angement,complete all as shown on electrical plate no.3 of SSR Part I (2009) and testing on completion.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and directed.
S & F type D power socket & switch for 1 phase, 220V, 50 Hz, 16Amps with mounting box complete all as specified & directed.
S & F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 25mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit.
S & F MCB DB made of sheet steel , powder painted with NUTRAL bus bar, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door
S & F MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps
S & F MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps
S& F of GI strip 32 x 6 mm buried in ground for earthing complete all as specified and directed by Engr-in-charge.
Supply & installation of Jef Ecosafe Maintenance free and Environment Friendly Earth Electrode set comprising of 17.2mm dia 3 mtrs long rod of Low carbon steel, molecular Copper Bonded for a thickness of 250 microns, highly conductive ANSI NSF STD 60 Certified, with 1Bags(50P) of environment friendly carbon based backfill compound, according to BS 7430 & IEEE 80 and with suitable Clamp in 100mm dia bore hole complete all as specified and directed by Engineer-in-Charge.
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.
M&L for soling ( or sub base ) 150mm thick ( spread thickness) in one layer with borken boulders or quarried stone of gauge 63 to 75 mm, interstics filled, surface formed and rolled with power roller 8 to 12 tonne to form a true surfaces and consolidated to required gradient.
M&L for plain cement concrete type 1:5:10 (40 mm graded aggregate) for mass concrete thick compacted surface over hardcore (soling ) complete all as specified.
M&L cement concrete work in pavement/hard standing of flexural strenght 40 kg/Sqcm in field using 400 Kg of cement per cubic metre,thickness of concrete 20 cm including formwork
M &L Forming 20mm thick expansion joints filled with preformed bitumenous filler and top 30mm primed and sealed with sealing compound, grade 'B', 200 mm thickness complete all as specified and directed.
M&L Forming construction (Dummy) joint for 65mm deep x 10mm wide, filled with sealing compound, Grade-'B', complete all as specified and directed.
M&L Finishing surfaces of concrete roads, pavements, by brooming. Complete all as specified and directed.
Supply, Erection & commissioning of Industrial RO plant of capacity 400 ltr/ hour including Filter feed pump, Dual Media Filter, Self-cleaning filter, antiscalent dosing pump, Antiscalent dosing tank, Cartridge Filter Housing and Cartridge, High Pressure Pump, Pressure tubes, Membranes, ICPW, Pressure Indicator, Pressure Switch, Flow Sensor, level switch, Conductivity Sensor, Smbs dosing pump and all standard accessories all as per standard specification and direction. Make : Thermax / ION Exchange / Optimus Enviropro Pvt. Ltd. / Sathya Sai Aqua Pura Services / Bharti Water Pvt. Ltd.
(A) Mechanical Part:- (i)Filter feed pump -1 No ,0.8 m3/hr @ 2.5 bar ,0.37 KW, CI Body. (ii) DMF Filter FXLDMF200 -1 No., Dia 200 X HOS 1117, 0.8 m3/Hr @ 2Kg ,FRP. (iii) Self-cleaning filter -1 no. ,0.8 m3/hr @ 50 micron, Reinforced Polypropylene. (iv) Anti scalant dosing pump- 1 no., 0-6 LPH , PP. (v) Anti scalant dosing tank-1 no., 50 LTR , LLDPE. (vi) Cartridge Filter Housing and Cartridge -1 no., 0.8 m3/hr @ 5 micron, PP / AEP. (vii) High pressure pump (HPP) -1 no., 1.4 m3/hr @ 13.4 bar ,2.2 KW, SS304. (viii) Pressure tube- 2 nos., 1 Element long -300 psi, FRP. (ix) Membrane- 2 nos. ,4” Diameter ,Polyamide –TFC. (x) ICPW -1 no., as Suitable, UPVC (B) Instruments :- (i) Pressure Indicator- 4 nos.,at Feed pump discharge, Inlet of pressure tube, Reject, Outlet of cartridge filter. (ii) Pressure Switch -1 no. at Inlet of HPP. (iii) Flow Sensor -3 nos. at Recirculation, Reject & Permeate line. (iv) Level Switch -1 no. at Treated water tank. (v) Conductivity Sensor -1 no.at Permeate of RO. (C) Electrical Part:- (i) Flexible Copper conductor Power, control & instrumentation cabling as per IS 1554 are considered with PVC Cable glands and lugs for end termination- as required. (ii) Starter Panel :- Microprocessor based starter panel MS powder coated. (D) Termination Points:- (i) Raw Water - At the inlet of filter feed pump @ flooded suction (ii) RO Permeate - At the RO skid (iii)RO Reject - At the RO skid to drain (iv) Power supply @ 3 phase At incomer of panel 415 vac ± 10 %, 50 hz, 4 wire (v) Chemicals -At each measuring tank Note:- Rate is inclusive of 1 year supply of Cartride -12 Nos
Supply and fix UPVC pipe 50 mm dia with complete fittings & accessories.
Supply and fix UPVC Ball valve 50 mm dia
Supply and fix Monoblock/ Pressure pumpset of 1 HP capacity for drain out waste water and pumping to filling point .
S&F rotational moulded polyethylene water storage tanks 2000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ® Fancy type 25mm as specified & directed.
S&F non Return butterfly Valve 50 mm as specified & directed.
Supply and laying of CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.
Supply, installation,commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx storage of 80 litre and nominal cooling capacity 40 Litres per hour.
Supply of antiscalant water treatment chemical of food grade maxtreat 9001N -30 Ltr can
Supply, install, testing &commissioning hi wall split unit air conditioners inverter type indoor/outdoor complete including outdoor unit mounting stand , electric driven single phase, copper tube condensor coil, cordless remote control of following capacities 5 star rated complete all as specified and directed.
1.5 TR BEE
Supply and fix PVC pipe 20 mm dia heavy duty inclusive of all tees,bends, elbows etc & fixing accessories for drain out condensing water of split AC including cutting of floor/opening of hole in wall and making good after laying of pipe etc to match the existing surface complete.
Supply and fix voltage stabilizer single phase 50 cycles AC supply designed for input voltage of 170 V to 270V and out put voltage stablised between 215V to 240V of capacity 4 KVA including necessary mounting arrngement complete all as specified & directed by Engr-In-Charge.
S & F Caution/Mandatory sign board (as specified by Engr in charge) made of high intensity grade retro-reflactive sheeting. It is made of Alcobond sheet/ Aluminium sheet 2 mm thick confirming to IS : 736 coverd with high intensity grade retro reflective sheeting as per IRC standard and logos in black to be printed and fixied after etching treatment fixed with suitable adhisieve. It is painted with spoxy to standard made fixed to structural steel frame of MS angle 25X25X5 mm with nuts bolts or reciets ensuring safety. This is fixed to one vertical past of 50X50X5mm angle or 50X50 mm square pipe. As required 3 mtr long. This is painted in black and white alternative band of 25cm ht. One msg/defination plate if size 900X200 mm is fixed below. Similarly round shaped boards 900 dia are provieded. Make Dark eye / 3M or equivalent
S & F Solar Delineator (100 X 47 mm ), made of polycarbonate and toughened aluminium alloy body, height- 145 mm , dia 80 mm, comprising of 4 super bright LEDs ( Sinor Infrastructure) as approved, embeded in PCC 1:2:4 type B-1 with 20 mm graded stone aggregate of size of block 30 cm X 30 cm X 30 cm complete all as specified and as directed. Dark eye / 3M or equivalent
S & F Solar road stud 125X125X25 mm (model : DA110-DHRUV) made from aluminium alloy and construction. Solar powered by ninocrystal solar panel. One high capacity NI-Cd reachargable battery. View distance Approx 1000m. LEDs-010, 03 pieces each side and total 6 pieces are used for high brightness of different colour back up - 12 hrs of continues lightning at night. Dark eye / 3M or equivalent
SURESH ELECTRICALS
RUDRAAY CONSTRUCTION
K K Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .